Unable to Delete init request

HI ALL,
i have a delta laod infoapckage, i tried init w/o data tranfer. request generated with '0' in the data target tab tab.
tried making it green and activate, i tried making it red and delete.. but its not getting deleted.. under update tab delta update option is enabled for infopackage
ERROR MEASSAGE
Processing in Warehouse timed out; processing steps mising
Diagnosis
Request processing in the BI system is taking a long time and processing step Second step in the update has still not been executed.
System Response
Caller is still missing.
Procedure
In the process overview in the BI system, check whether processes are running in the BI system under the background user.
If this is not the case, check the short dump overview in the BI system.
please let me know the solution to activate dso in process chain with this infopackage
Thanks,
venkat

Hi naidu,
Can you tell me why you want to delete the request? What is the scenario?
What do u mean by already have delta IP, i tried init w/o data transfer?
If its not allowing to delete the request from DSO...
Delete the entry from the below table ... RSICCONT ...it will get deleted from the DSo as well.
Later delete the init selections from IP menu --scheduler --> Init options for source system --> delete the init request .
Tcode - se11 --RSICCONT -> enter the request and from menu select the option delete...it will delete the entry from DSO.

Similar Messages

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

Unable to Delete the request in ODS

HI Friends,
      I am facing the problem with deleting request in ODS.
          I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
    it is showing the message request is already activated;no further QM action possible.
       My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.

Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK

Unable to delete PSA request

Hello,
I am unable to delete the request in PSA the status of the request is Yellow(Undecided)
But I would like to delete this one.
Thanks,

Hello Ram,
Is it giving any error. If so what is that?
Right Click the PSA and select Delete
or you can use the function module RSATREE_PSA_DELETE_BATCH to clear all the PSA.
Thanks
Chandran

Master Data -- unable to delete the request

I loaded master data for 0EMPLOYEE info object, all the records Added but the request is in Read,
I am trying to QM status Green Manually it is giving the message QM action not allowed for DTP requests in master data and Text Tables .
I am unable to delete the request also, when I am trying to delete it is saying
Error:
Data inconsistency; Partition /BIC/B0000959000 not deleted
Message no. RSAR026
Diagnosis
In table RSTSODSPART you selected all the requests of a partition to be deleted logically. Some entries partno = 0 still exist in the partition. Therefore the partition is not deleted.
System Response
The system outputs an error when deleting the partition.
Procedure&
Check the table for data consistency.
Error:
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 177'
Message no. RSSTATMAN102

Hi,
I have answered to another thread like this one which is still unsolved (I suggested to open the issue in the OSS)
You can try the following OSS note for a start
SAP Note 1048161 P14:Set QM status for yellow requests using funcion module
I've also found a very recent one:
SAP Note 1078527 P16:Request deletion with error RSSTATMAN 102 in row 34
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

Unable to delete transport request

Hi Team,
The Standalone sandbox with ECC 6.0
Im deleting the transport request , getting error unable to delete the tranport request
Cannot open log:
hostname\sapmnt\trans\log\CC000036.SID.
Kinldy assist me in solving the issue .
Regards
Kumar

Hi,
Are you trying to remove the transport request from the STMS buffer? This only removes the TR from the buffer. It still stays in the system. If you want to delete the transport request altogether then remove from SE01.
Check if the file
hostname\sapmnt\trans\log\CC000036.SID exists. If so, then make sure it has proper authorizations. It should be accessible by <sid>adm and SAPService<SID> if Windows host. Also the trans directory should be accesible by the two users.
Regards,
Srikishan

Process Chain - Unable to delete overlapping request

Hi Gurus
I'm in the mid of creating process chain to load transaction data in which I need to delete the previous load that loaded in using the same DTP previously
In the process chain , i have included a process "Delete Overlapping Request from Infocube" . Once i'm in the screen of maintain variant for this process, i selected DTP as the object type but unable to find the DTP that i have created under the object name.
Can someone point out what is missing
Thank you

Hi,
Looks like you need to give the the techincal name of the DTP. if you are un able to find the technical name of the DTP you can find that in the transport organizer.
just drag and drop the infoprovider ( with dataflow before) you will ge the DTP as required.
note the technical name of the DTP .
include the technical name in the process and activate the process.
Santosh

Unable to delete the request from ODS

Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your reply

Hi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi

Unable to delete the request id in ODS....indicating partially activated

Dear All,
When I tried deleting a request from ODS, am unable to turn the QM status to red, itz indicating that the request is partially activated. When I tried deleting the request without changing the status, the delete icon is popped up, but eventually goes back to the previous status and hence does not get deleted.
Due to the above, the subsequent requests coming into the ODS are not getting activated at all...
I tried running the function module RSBM_GUI_CHANGE_USTATE, to delete the request, but to no success. Similarly, when I tried locating the requests in the four tables RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ, could not found the request id to be deleted in any of these 4 tables.
Please suggest some solution as it is of high importance...
Thanks and Regards,
Edited by: sachitp on Feb 27, 2011 12:25 PM

Hi,
You can try the below options,
1. Remove the request data from the active table using the function
to delete data selectively.
You must enter selection criterion to select the data of the
aborted request.
2. Use Transaction SE37 to execute the 'RSAR_ODS_API_DEL' function
module as follows:
I_REQUEST <Name of the activation request>
I_DATE <current date>
3. Use Transaction SE16 to delete all entries for this request and
for this ODS object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE
and RSODSACTREQ tables.
Thanks,
Vinod

Delete Init request

Hi all,
I have an ODS which updates data to an infocube. I accidentally deleted the request from the cube and now its asking me to do an init upload to the cube.
But when I do an init upload to the cube by using UPDATE 3.X data to targets it says
" Deltas already loaded for request ... no 2. init ....If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to
delete the delta queue in the source system, and restart the delta
process.
Choose the menu entry 'Init. Selections in the Source System' from the
Scheduler.
If I delete the Init package , will it delete the data from Infocube or the ODS.
Regards.
Paresh.

Hi,
Try Right Click Infocube-> manage -> reconstruct->Your deleted request will appear here. select it and click 'recontruct/insert'. This will do .
Best Regards

How to delete init request when load is taking place from ods to Cube

Dear All,
I have initiated the init load from ODS to Cube, but the init request was not successfull... Now on clicking the init infopkg i get the short dump error....
I am trying to acess this infopkg so that i can delete the old init and reschedule it again...
Now in order to avoid this error i need to delete the init request somehow..... Since data load is happening in BW system only there is no way to go to delta queue and delete the init...
How can i delete the init request in this case or how do i avoid this dumup error???
Thanks & Regards,
Anup

From se11, go to the table, see the content... from this window mark the check box for relevant entries in the first column and click on Display button (F7)
enter "/h" in the command prompt and press enter
Click the top most green button to execute.
From the debugging screen, double click on variable "CODE" change the value to "DELE" (from "SHOW") and save (by pressing enter in bi7 and by clicking pencil icon in bw 3.x ).
Press F8
In the result screen you will find the delete entry in the application bar
Delete one by one after ensuring the record content.
Better you can ask any abaper to delete the table entries in the debug mode coz its a production server..else you can call me 9500066350(I prefer you to go along with abaper if you have no option dont wait for calling).

Unable to delete DSO request.

Hi Everyone,
We have Real time Data Acquisition (RDA) implemented in our system. Yesterday RDA failed due to invalid characters. We corrected data at PSA level and tried to run repair process chain, the request is not deleting with a
diagnosis message "Insertion of a data record into the active table failed. The data record already existed. This indicates manual changes to the database table".
Could somebody help in what way we can delete this request and load the corrected request. Any suggestion is highly appreciated.
Regards,
Shashidhar.

Hi Everyone,
Thanks a lot for your valuable suggestions.
Atlast the request was deleted successfully. I have following request related information to update to all of you.
Apart from the standard tables mentioned, viz., RSICCONT, RSMONICDP and RSODSACTREQ, . There is an other table RSBKREQUEST. This table contains the details of DTP requests.
Even after deleting from other tables mentioned before, we have to set the status field of the table RSBKREQUEST to "DELETED". Ours was in "INCORRECT" status, this was the reason because of which it was unable to run repair process chain, even after DTP request was removed from Infoprovider Administration.
So please note above table, which in very important for DTP requests and first 3 tables are enough only incase DTP is not involved and only infopackage is used to load to data target (3.x version).
Regards,
Shashidhar.

Deleted Init Request

Hi all,
By mistake i have deleted the init request.
How to proceed now ?
Can i use Init without data transfer option ??
Regards,
Viren.

If its delta queue based datasource (LO), i don't think it will create any problem. As your delta records are getting updated in your delta queue, you are just re-initalting init again for gettiing ur delta working properly.
Abt Timestamp based datasources (FI/CO), i am not much sure as you don't do any init setup for it manually. Do init without data transfer for the same selection, and load data for the days you have not extracted using repair full load. Hope it will bring delta for the days your load was not working properly. You need date field as selection for this in your datasource. Do you have date field in datasource?

Urgen t- unable to deleted a request in ODS

Hi All,
I am trying to delete a request in ODS but the request is appearing again.
tried all the possible way. Can anybody help.
Thanks in advance
Narendra

Hi
If you wanted to delete the request any way, then
Now you can try to delete the same requests from the tables RSICCONT.
you have to modify the request no. from the table "RSMDATASTATE"(Request SID for which all requests are technically o.k.), RSBODSLOGSTATE (PSA ID )and RSODSACTREQ(Request ID and ODS activation ID).
Thanks,
Teja

Unable to delete a request from a Cube which is loaded by Open hub to flat

Hi,
We have one Cube from which we are transferring data to a flat file by open hub.
the DTP for the OPEN HUB is delta DTP.
Now when i am trying to delete a request from Cube its not allowing me.
Its giving error as request is already updated to the target so delete the request from target first.
I tried deleting the open hub request entry from RSBKREQUEST table.
but still its not deleting the request from the Cube.
Can you please help me in solving this problem.
Thanks in Advance,

I think request is having datamart, which is not allowing it to delete.
You can try to reset (delete) the datamart by clicking on it in cube request and then try to delete.
Or if it does not work, you can delete it from RSICCONT table, which will delete the request from cube also.

Unable to Delete init request

Similar Messages

Maybe you are looking for