HT4792 when i try to import the project into imovie from the desktopk, the project is in faded letters and it can't be clicked on. I've tried this 5 different times with no success
I followed the steps to import an imovie project from my iphone to imovie on my mac. However, when I open Imovie and select file, import, movies HD project, and then go to my desktop (to where i moved the project out of itunes) - I can find my project but it is in faded lettering - so it cannot be selected to be imported. Ive tried this 5 times to no avail. HELP!
It sounds like you are clicking the wrong selection in step 8 which says...
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Choose iMovie for iOS Project, not iMovie HD Project. iMovie HD is an obsolete version of iMovie from 2006.
Here is a screen shot of what to look for.
Similar Messages
-
When I try to import mov files into iMovie'08 (7.1.4) the files are greyed out. Any suggestions?
When I try to import mov files into iMovie '08 (7.1.4) the files are greyed out. Any suggestions?
Hi Appleman - thanks for your guidance.
OK RealTime Inspector: Dimensions of my clips - as I don't know which bit this is I will list everything under Inspector, including Format:
00117
00117
33.30
Format:MPEG-4 Video, 1280 x 720 millions
AAC, 2channels, 44100Hz
FPS29.97
Data Size2.57GB
Data Rate 10.20 Mbits/s
Current size 1280 x 720 pixels (Actual)
And re the types of tracks you mention that iMovie '08 can't import, I don't much about film clips so haven't yet made sense of this, tho I do see that the clips are organised into chapters, so presumably this is 'chapter tracks'?
Thanks - I'll await your further instructions :-) -
Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268 -
Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.
Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done? -
I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?
at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi. -
When I try to import video clips into Premier Pro 6 the audio and video aren't synced.
When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate? -
I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?
What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT -
I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?
The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them. -
when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!
RESET YOUR ROUTER
No. Reset your router. -
I backed up my iPhone onto iCloud, and now any new pictures I take don't save in my camera roll. And when I try to open the photo app it turns white and eventually it closes out of the app.
rabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage. -
When I try to open the App Store it tells me that it can't connect. What can I do?
When I try to open the App Store it tells me that it can't connect. What can I do?
Try here. See if there is something that will work for you.
Can't connect to the iTunes Store - Support - Apple
Best Fixes for 'Cannot Connect to iTunes Store' Errors | iPad Insight -
My iphone turned off and i can't turn it on. I tried to turn it on with plugging into charger but it doesn't help. the problem is that the power button doesn't work.
Well, that is going to make it difficult, since the first two steps of user troubleshooting require the use of the power button. I suggest you get that fixed.
-
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
When I try to start Firefox, I get a message that it is already running, but not responding and that I should close it before trying to run another Firefox. But I cannot find a way to close Firefox program that is not running as far as I can see. I tried uninstalling and reinstalling Firefox, but that did not work. I've tried various other things, but no luck. I thought programs should stop when the computer is turned off, but that didn't work either.
How are you opening the Profile Manager?
*http://kb.mozillazine.org/Profile_Manager
Sounds that Firefox is still or already running.<br />
See:
*http://kb.mozillazine.org/Kill_application
Maybe you are looking for
-
In my case , there is a server ( windows 2008 enterprise) . Instead of sharing the internet using the server . i have done the following . i have 24 port switch which is connected with the modem (ISP Gave it to me). My server then is connect
-
Hello: This is kind of new to me and I am not a computer expert. I am installing Oracle 9i from the CD and here is the message I am getting: "Error in writing to directory c:\Document and Settings\Locals~1\Temp\OraInstall1024. Oracle Universal Instal
-
Field selection from adrc table
HI all, Actually selecting some fields into say table t_likp based value entered for vbeln. by takin t_likp-vbeln i can go to vbpa and select adrnr from vbpa for parvw eq 'sh'. my question is can i take this vbpa-adrnr and go to adrc di
-
What classificatin of dye is used in HP Color Cartridge # 61
I would like to determine if the dye used is acid, disperse, direct, pigment or other in my color cartridge. I printed a coated fabric and the color is wash fast which is very good. I have to determine the type of dye uses
-
Tablet 2 thinkpad no enciende sino es con el cargador
La lleve a un centro autorizado para repararla y me informan q debo cambiar el systemboard, alguien me puede confirmar si es esa la solucion? y otra falla q tiene es q la hora y y la fecha no se actualliza y se va retrasando, no se si la tablet tendr