HT4796 ??it keeps looking for computer, both are connected to home network, what now?

? I am trying to transfer from pc to mac, using migration tool, both are connected to home network, it keeps saying "looking for other computers" - not finding it, what now?

   Hi,
      Please follow the steps in the link below to solve the issue :
http://support.hp.com/us-en/product/HP-Officejet-P​ro-8620-e-All-in-One-Printer-series/5367611/model/​...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How do I use my wireless Led TV as a second monitor using my home network without any cables? Both of them are connected to home network

    How do I use my wireless Led TV as a second monitor to my mac book pro using my home network without any cables? Both of them are connected to home network

    Having a gateway there is not going to be a problem. We just need to configure the Time Capsule correctly to work with the 2Wire.
    You will need one ethernet cable to connect the 2Wire to the Time Capsule and a second ethernet cable to temporarily connect your computer to the Time Capsule so that it can be configured.
    The 2Wire you have now should already be broadcasting a wireless network, so once you have the Time Capsule setup, you will actually have two wireless networks there.
    Here's how to configure the Time Capsule to work with the 2Wire:
    Connect an ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN (circle icon) port on the Time Capsule.
    Connect another ethernet cable temporarily from your computer to one of the LAN <-> ports on the Time Capsule
    Open Hard Drive > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Base Station tab below the row of icons to assign a name for the Time Capsule, a device password (write this down) and adjust time zone settings
    Click the Wireless tab below the row of icons
    Wireless Mode....Create a wireless network
    Wireless Network Name....Your choice
    Radio Mode....Automatic
    Channel...Automatic
    Wireless Security...WPA/WPA2 Personal
    Wireless Password....Your choice (write this down)
    Check mark next to....Remember password in keychain
    Click the Internet icon
    At the bottom, change the setting for Connection Sharing to "Off (Bridge Mode)"
    Click Update at the lower right and the Time Capsule will restart after 20-25 seconds and you should get the green light.
    You should now be able to connect to your Time Capsule wireless network.
    I'm not clear on whether you have tried to setup the Time Capsule to backup your computer. Post back if you need some info on that. We may need to start another thread for that as that will be a different subject.

  • Although I'm connected to my WIFI network my computer keeps "looking for new networks" How can I stop it from doing so when I'm working at home and don't want another network?

    Although I'm connected to my Wi-Fi network my computer keeps "looking for new networks." How can I stop it from doing so when I'm working at home and don't want another network?

    You might want to update Safari to 3.12. I would empty the safari cache. (Safari>Empty Cache). Then quit Safari. System Preferences>Network>Show:Airport>TCP/IP. Insert the following into the DNS Servers box;
    208.67.222.222
    208.67.220.220
    then hit apply. Now launch Safari. You should also try powering down modem, router and Mac and power up in 2 minute sequence; modem, router, Mac.

  • Macbook air keeps 'looking for networks'

    My Macbook Air keeps 'looking for networks', and the upload speeds are slow -- should be 50 plus, are 25-30 mps.
    Upstairs, my iMac gets 60mps upload and 30 mps download.  So Verizon is providing what they promise, its just
    that the MacBook Air seems to have a bit of a problem.
    Verizon has done what they could to tweek the system, and it make make a small improvement -- from 20 to the 25-30 mps.
    The tech suggested, politely, it was time to talk to Apple, and I will make a Genius appt.
    But I was wondering if other with MacBook Airs had had this problem of the computer constantly 'searching for netsworks'.
    Thanks,
    Hal

    Open System Preferences > Network > Advanced then select the Wi-Fi tab.
    Drag your network to the top of the list.
    Select:  Remember networks this computer has joined
    Click OK.
    Keep in mind, everytime you click the AirPort icon in the status menu bar, it will automatically "look" for networks.

  • I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

    I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

    Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
    For Home Sharing to work you need to
    File > Home Sharing > Create Home Share.
    You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
    Home sharing will then work

  • System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

    System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally  gets through.

    Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
    Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
    802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
    You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
    Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

  • HT201250 I had turned off the time machine auto back up and now when I try to turn it back on it keeps looking for a disk even though the time capsule is shown, do I have to set it up again as an initial?

    I have been using the time capsule to back up both my iMac and recently added MacAir, it has been working fine but recentlky I had turned the time machine off on the Macair and now when I try to turn it back on it keeps looking for a disk even if I select the time capsule. Do I have to start the backup for the Macair as a new backup?

    That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!

  • Laptop keeps looking for previous migration machine at start up

    Every time I start my machine it keeps looking for my previous laptop which was used to migrate my information. This slows the start up down considerably. It seems to think that this is a server I want to connect to by default and says it is not, understandably, available.
    Is there any way to stop this? Thanks

    frank120 wrote:
    I started in Safe Mode and the problem didn't happen, which was good. However when I returned to normal mode it was back again. I have a Time Capsule which mounts whenever I start up so I also tried starting in normal mode without the wi-fi on to take this out of the equation, but again the machine was still looking for the missing machine.
    Since it will startup in safe mode, that tells you that there is some third party software that is attempting to startup in normal that is causing the problem. So now that you know that, you are going to have to start looking at what third party software is causing your problems.
    |___________________
    Allan

  • HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

    hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

    Hi.
    I had a similar problem myself. This is what helped me.
    I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID.  Then went back to app updates. Once I put in my ID password all was fine.

  • Trying to restore from time capsule to nes hard drive, keeps looking for disks ! Can you help

    ccan't restore from time capsule to new hard drive, after changing to new HD, after calculating required space to restore it keeps looking for disks! Have have put original OS X  install disk 1 in it won't Eject , any help

    The very best way to do this is with ethernet to the existing router. Put the TC in bridge mode manually.
    Then plug it in to existing router.. we recommend LAN router to WAN on the TC but even that is not 100% necessary.
    If you want to link by wireless, to a non-apple router that is bad.. recommend strongly against it. Join a wireless network is super slow.
    If you have a desktop Mac you can plug it directly into the Mac by ethernet.
    But we need to know how the Mac is connected to internet.
    I have given some info on one layout here.
    https://discussions.apple.com/thread/4817218?tstart=30
    If you end up relying on an old TC. And any of the models from Gen1-3.. and increasingly Gen4 have all reached EOL.. they can die suddenly and either take your files with them or be hard to recover. Also a TC is slow cf a USB external drive even, which is more reliable. Considering a 2TB is <$100 I would be careful using an old TC simply because you got it free.

  • HT1338 My Mac keeps Looking for Networks? The ICON in menu when clicked shows the WI- FI (in gray) ON then goes to Looking for Network again. Shutting down the connection.

    My MAC keeps looking for networks? The ICON in menu bar when clicked shows the WI-FI (in grey) it keeps shuting off and disconnecting. Any Ideas???

    Test after taking each of the following steps. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
    7. Reinstall OS X.

  • When trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?

    when trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Since lion upgrade iMac keeps looking for old server

    Hi,
    I have a NAS prior to Lion upgrade which was working perfectly. Now with the Lion upgrade the NAS (Sitecom) ther were some issues. I have reinstalled the NAs and had given it a new name. I can find the NAs now so thats not a problem.
    But almost every hour I get 2 warning that he can not find the "old NAS", it really start annoying me and I've looked everywhere and I don't even find any link (Finder) towards it so I don't know what to do to get rid of this message, receiving it every hour twice really start getting on my nerves.
    Sorry for th Dutch, but the message translates;
    A problem has occured with connecting to the server 'VanBeeckNAS'
    The server doesn't exist or is currently not available. Check the servername or the IP-address of the server, ...
    Any help is highly appreciated.
    Peter

    Same problem since lion. Not only can I not back up to the server it keeps looking for it several times on start up. Real annoying.

  • IPhone Wi-Fi sync stuck at "Looking for [computer name]"...

    Hello,
    For the longest time my iPhone 6 has not been able to sync with iTunes wirelessly, despite the fact that the phone clearly knows if iTunes is running or not. I'm running iOS 8.1 on my iPhone and iTunes 12.0.1 on OSX Yosemite 10.10.
    I have confirmed that the phone does know when iTunes is running on my Mac. When iTunes is running and I go to Settings > General > iTunes Wi-Fi Sync on my phone, the "Sync Now" button is enabled, but when iTunes is not running the button is disabled out with a message saying "Sync will resume when "[computer name]" is available."
    When iTunes is running and I tap "Sync Now" from my phone, the button changes to "Cancel Sync", and a message below says "Looking for [computer name]...". That lasts for about a minute, and then the screen reverts back to its previous state (with the "Sync Now" button). The actual syncing never occurs.
    I've checked the firewall settings on my Mac to make sure iTunes is set to allow incoming connections, and it looks like everything's configured properly.
    Has anyone run into this issue before? I'd greatly appreciate any help!
    Thanks!
    Ryan

    Well, it happens often and, as to me, I don't think it's an issue of Apple, OS or whatever else, rather than a Wi-Fi nowadays technology itself: let's be hones — even though it is popular it is not that good. But, getting back to your question — my solution (the one which works for me) is easy and quite — no hassle with password, nothing...
    All you need is to renew lease of your device over the wi-fi network. Go to the Wi-Fi settings, click the blue arrow to get to the settings of the current network and click the renew lease button; launch iTunes — it's there your iDevice.
    Personally, I've got two of them — and from time to time I'm renewing the lease — that solves mentioned issue.
    With the Kindest Regard,
    Yours Aunt Deena
    PS
    Will you excuse my English, which is not my native language, and thus has more misstypes and mistakes than it really should.

Maybe you are looking for