HT4972 my iphone screen is locked with itunes symbol and power cable. when i try to restore it shows error 23.
Hi. my iphone is locked on a screen with itunes symbol and power cable on it. When i try to restore it shows error23. any help would be appreciated
http://lmgtfy.com/?q=iphone+error+code+23
Similar Messages
-
Screen is locked with itune symbol
Screen is locked on itune symbol
When you plug it into your computer running the current version of iTunes, it should detect the phone in recovery mode and offer to restore it...
-
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. is this corect? I am unable to use the phone now. What should i do next?
I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries -
The phone is backed up on ICloud. I connected it to my computer to download some photos and Itunes indicated that and update was available for the phone 7.0.2. So I let it download the update. I later received a message that the update was unsuccessful. The creen on the iphone is showing the itune symbol and a cable. But itunes will not recognise the phone.
Turning the phone on and off comes up with the same screen. I have tried pressing the ON Off Button and the Home button at the same time for 10 seconds but get the same result.
what can I do to get the ipnone working again.Dear Bruce,
Due the unsuccessful updation your iPhone has stuck in recovery mode. you need to download the iOS 7.0.2 iPSW from the following link http://appldnld.apple.com/iOS7/091-9872.20130924.2wc82/iPhone4,1_7.0.2_11A501_Re store.ipsw
and have to restore manually. you can do this by shift + mouse click the restore button in iTunes this will give you an opendialogue box to select the iPSW from which you want to update your iPhone. please make sure you have all the backup stored since this will be a restore not an update so you data will be lost and you will have to restore your data from backup.
if this help please mark is as answered. -
Tried updating software but now frozen with itunes logo and usb cable picture on screen help
Tried updating ipod software, now frozen with itunes logo and usb cable picture on the screen. Computer will not reconise it
- If ou can turn the iPod off, then see if manually placing the iPod in Recovery mode will allow a restore. Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If it always remains on let the battery fully drain. After charging for at least an hour try a rest and restore. -
HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
HT201412 my Ipad screen is stuck with Itunes logo and wont repsond
my Ipad screen is stuck with Itunes logo and wont repsond
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
Iphone 5 screen is stuck on itunes logo and USB cable?
iPhone 5 screen is stuck on iTunes logo and USB cable. Reset does not work.
Place your device in recovery mode as explained here:
iOS: Unable to update or restore -
I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!
hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.
-
My Imac is locked with apple symbol and loading sign, how i do fix this?
my iMac is locked with apple symbol and loading sing since last night, how i do fix this?
Zap the PRAM and Reset the SMC, then try again.
-
AAfter updating my iPad 4 wwith iOS 8 it now shows iTunes symbol and charging cable but it won't let me do anything else please help
Hello nicholafrombelfast,
Thanks for using Apple Support Communities.
This screen on your iPad indicates that the device is in recovery mode and will need to be plugged in to your computer with iTunes to restore the device back to its factory settings. Please see the following articles for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
Use iTunes to restore your iOS device to factory settings
Take care,
Alex H. -
Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore 'Unknoown error 12' pops up each time.iphone was not jailbroken. please help
From the article that your statement was posted from:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020. -
I can not update my ipad2 and now only have the itunes symbol and connection cable showing?
I can not update my ipad2 and now only have the itunes symbol and connection cable showing?
Connect the iPad to your computer's iTunes. You have to restore your iPad now.
iTunes: Restoring iOS software
Read the kb article all the way to the end. You may need to use recovery mode.
Maybe you are looking for
-
hi all,, i am doing a project of devolping an xml editor.could anyone provide me the code for it. very urgent plzzz....
-
How to access hard disk connected to wifi router?
Hi, I have a hard disk connected to a Wifi router (Huawei B593) how can I access the had disk from my MacBook Air?
-
Show an image on Url address in oracle form
hi all i use oracle 10g form i want show a dynamic image that create by cgi program on a url address i used READ_IMAGE_FILE but by url address function din not wolrked plz help me how can i show this type on image?
-
Workspace could not be attached
Hi All , I executed below: exec DBMS_CUBE.BUILD('NN_OLAP_POC.MARKET_SALES_CUBE, NN_OLAP_POC.BRAND_SALES_CUBE', parallelism=>2) ; and it fails with : ERROR at line 1: ORA-37162: OLAP error XOQ-01707: Oracle job "JOB$_196" failed while executing slave
-
Missing plug-ins in Mainstage?
Mainstage has been an incredible tool for me because I'm able to open Channel Strip Settings saved in Logic and create the perfect patches for playing live. Unfortunately, a few plug-ins that are available in Logic Pro 8 are not found in my Mainstage