HT5037 I got i photo up date and it does not work

I keeping getting a message to install new I photo but i allredy have

Sorry but no mind readers or remote viewers here
What version of iPhoto do you have? Of the OS? What is the exact error message?
LN

Similar Messages

Adjusting date and time does not work for pictures from one camera.

I have a set of pictures taken with a Casio EX-Z20 camera in my Aperture 2 library. Because the clock of this camera was off by a few hours I changed them all at once with the option "Adjust date and time...". This worked well and when I sorted the images from different cameras by date in Aperture they were in the order.
When exporting all the images as JPEG the images in the set from this camera was reset to it's original.
That was very strange, I decided to try and change the date of these images in the master files as well by checking the checkbox "Also change master files".
When I change the date from 15-10-2008 18:34:44 to 16-10-2008 10:34:44 (+16 hours) the date of the image changes to 16-10-08 01:36:43 GMT+02.00 (+9 hours, 1 minute, 59 seconds).
When I change the date from 16-10-08 01:36:43 to 16-10-2008 19:36:43 (+18 hours) it ends up as being 16-10-08 10:38:42 (+9 hours, 1 minute, 59 seconds)
When I change the date from 16-10-08 10:38:42 to 16-10-08 10:48:42 (+10 minutes) it ends up as 16-10-08 01:50:49 GMT+02:00 (-8 hours, 47 minutes, 7 seconds)
I have worked around this problem by adding some hours to the desired time and eventually got it about right, but this is still a very annoying problem. Has anyone else encountered it or know of a way to avoid it?

{quote:title=JohniBook wrote:}
Has anyone else encountered it or know of a way to avoid it?
{quote}
I certainly have had issues regarding wrong dates, time stamping and DNG's in Aperture. There have been posts here from others as well with the same kind of date problems.
I have reported the bug to Apple and hope for a solution to the issue in a near future.
Regards
Paul K

My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

Yes it does, although I wa a minute faster than you. To see if someone is parroting you, or that they just posted at the same time, look at the head of the post and it will show you the data and time of the post and who they were responding to. Looking at that first saves some misinformation in future posting.
You'll see some posts where there will be 5 posts all in the same minute sometimes. Answer posts late at night and you won't see as many.
BTW, I clicked the Like button on your post where you gave the link for the users manual.

Copy and Paste does not work in filter statement of table data

I am using SQL Developer 3.0.04. I can not copy nor paste in the filter criteria when watching or editing table data. Is it a bug or do I have to change some settings?

Hi Sven,
I did a bit more research and now I hope we will be talking about the same thing. Bear with me and let me clarify. In terms of my prior comment about the process necessary to copy a value from a data cell into the clipboard, I was totally off-base. Once the focus is on a data cell, all one need do is Edit menu|Copy or ctrl-c. I have no idea why I had trouble with that yesterday.
Anyway, getting back to what's relevant with regard to your issue:
1) If something is in the clipboard, then both Edit menu|Paste and ctrl-v work for a data cell target.
2) If something is in the clipboard, then Edit menu|Paste fails for a data tab filter target.
3) If something is in the clipboard, then ctrl-v works for a data tab filter target.
So obviously conditions exist where pasting to the data tab filter can work. But here is a scenario where I found a problem similar to what you describe:
1) For the EMP table in SCOTT, display all employees in the data tab.
2) Apply a filter. For example, filter on JOB='SALESMAN'. Now 4 salesman, all in dept 30, are displayed.
3) Next you decide to view only employees in dept 30.
4) Copy the value 30 from the DEPTNO column. Carelessly put the focus on ENAME column in one of the data tab rows.
5) Next focus on data tab filter to blank out JOB='SALESMAN' predicate. Drop down to select DEPTNO. Append an = sign.
6) Finally Edit menu|Paste. Instead of seeing DEPTNO=30 in the filter, we see...
7) The filter contains nothing and is disabled (greyed out).
8) The ENAME column of the prior focus now contains the value 30 rather than the a salesman's name.
Your case may be different/more complex, but at least this simple case demonstrates in a repeatable fashion what I noticed but didn't describe very well yesterday. I have logged the following internal bug:
Bug 12753266 - EDIT MENU PASTE INTO DATA TAB FILTER DOES NOT WORK AND MAY DISABLE THE FILTER
Using the rollback button, blanking out any filter value and hitting enter displays all original employee rows.
Regards,
Gary

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card.

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

I have downloaded an app and it does not work

I downloaded two apps. They are both are the same application, on;y difference is that one is the 2.0 version and the other 3.0 version.
When I downloaded the 2.0 version I thought this was the latest version, but turns out there was another newer version. But I tried the 2.0 version first and this does not work on my mac. The application is Wondershare Data Recovery. It is not able to see any devices on my mac.
So tried the 3.0 version and again same problem, does not work, funny because after careful researching on what product to buy I decided to download the trial version and it works fine. Only thing is that I need to but the full version to successfully retrive my disappeared images from memeory card, from my camera phone.
anyway the point is, I have just wasted £95, and I would like this back, or at least the problem resolved. Any help would be appreciated.
Thanks
C

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Updated -
I only find the v3.0 in the UK Mac App Store (MAS). But on the developer's website I find two separate apps; Wondershare Data Recovery for Mac, which is v3.0 and Wondershare Data Recovery for iTunes, which is v2. Where did you buy Data Recovery for iTunes? I don't find it sold in either the MAS or the iTunes App Store.
Have you used the support link to the developer on the apps pane in the MAS? That is who Apple will direct you to contact.
Did you remove the trial version before downloading and installing the paid MAS version(s)?

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

[svn] 4377: Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey

Revision: 4377 Author: [email protected] Date: 2008-12-22 16:16:25 -0800 (Mon, 22 Dec 2008) Log Message: ----------- Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey QA: Yes Doc: No Checkintests Pass: Yes Details: * Regression due to some refactoring of user-agent handling that was failing to set up defaults if no explicit <properties> were defined for the <channel-definition>. This meant that for IE, no kick-start bytes were being pushed down the streaming connection at setup time... Ticket Links: ------------ http://bugs.adobe.com/jira/browse/BLZ-292 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/endpoints/BasePollingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/util/UserAgentManager.java

Hi,
Thanks for your feedback!
This feature has been going through a lot of changes with the BlazeDS and Flash Builder builds.
We request you to pick up the BETA2 build of Flash Builder and BlazeDS 4.0.0.10654, hopefully you should see things working fine.
Kindly let us know if you still encounter problems.
Thanks,
Balaji
http://balajisridhar.wordpress.com

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
I wonder if there is a broken .plist file that may be fixed ...?

I was gifted an iPhone5 from U.S and it does not work in dubai as it is locked how do i unlock it ??

i was gifted an iphone 5 from U.S and it does not work in dubai as it is locked how do i unlock it ??

Only the carrier it's locked to can unlock it. Have whoever you got it from contact the carrier it's locked to and request an unlock.

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess.

HT5037 I got i photo up date and it does not work

Similar Messages

Maybe you are looking for