HT5048 Snow leopard to os x lion upgrade

I upgraded from snow leopard to OS x lion 10.7 few weeks back. Ever since then I am facing issues with iTunes, Chrome, software update and other applications. I wanted to upgrade to 10.7.3 however even I am unable to do that. Has anyone faced issue?

There is no good reason to do so actually.
A machine that can only go to 10.7 and not directly to 10.8 is just better off remaining on 10.6.8 for performance and running older PPC based software.
In fact I suggest any Intel Mac that's older than 3 years (especially out of AppleCare) to remain on the speedy 10.6.8
Eventually hardware will die and one can buy the newest machine with the newest operating system in one package, along with all new software etc.
Apple is maintaining support for 10.6.8 because of AppStore, as it can be used as a attack vector if it's not updated I assume.
For Snow Leopard Speed Freaks
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Similar Messages

  • Can I upgrade to Snow Leopard, and then Mountain Lion, on my 2009 MacBook with OS X 10.5.8?

    I want to upgrade to Snow Leopard so I have access to iCloud for all my devices. I bought my MacBook mid 2009 and am currently running OS X 10.5.8. Does anyone know if I am able to upgrade before I go and buy Snow Leopard?
    Thanks.

    You can upgrade from 10.5 to 10.6 with no problems. Any program that runs under 10.5 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/ 
    You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any third party Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ 
    You can order a Snow Leopard 10.6 install disk for $29 from the Apple Store as long as you have at least 1gb of RAM and 5gb of free space on your hard drive. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.
    Once you are at 10.6.8 you can buy Lion for $29 from the App Store if you have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • Cannot Upgrade OSX Snow Leopard To OSX Mountain Lion

    Cannot Upgrade OSX Snow Leopard To OSX Mountain Lion I Have Tried twice but it just doesent upgrade what do i do please reply fast

    Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    If you are running Lion, you can find out if your current Mac qualifies by clicking the Apple icon at the top left of your screen, choosing About This Mac, then clicking More Info.
    http://www.apple.com/osx/how-to-upgrade/

  • HT6012 I had an older version of Mac OS, I upgraded to Snow leopard and then OSx Lion, most of my software has been upgraded except for Imovie.  Now I can't get my projects to upload or share to iDVD or iTunes.  What do I do?

    I had an older version of Mac OS, I upgraded to Snow leopard and then OSx Lion, most of my software has been upgraded except for Imovie.  Now I can't get my projects to upload or share to iDVD or iTunes.   Also to compound the situation everytime I attempt to share to iDVD or iTunes, iMovie quits unexpectedly.    What do I do?

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

  • My imac is running software version OS X 10.6.8.  Do I need to ugrade to Snow Leopard before I a can upgrade to Lion?

    My imac is running software version OS X 10.6.8.  Do I need to ugrade to Snow Leopard before I a can upgrade to Lion?

    Mac OS X 10.6.8 is Snow Leopard. If you can't or don't want to upgrade your Mac to Mountain Lion and it has a Core 2 Duo(not Core Duo) or better CPU, phone the Apple Store and order a download code for Lion.
    (69929)

  • HT1338 Where can I buy Snow Leopard so that I may upgrade to Lion?

    Where can I buy Snow Leopard so that I may upgrade to Lion?

    If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax.  It's a download.

  • How can I upgrade from OS X Snow Leopard to OS X Lion?

    How can I upgrade from OS X Snow Leopard to OS X Lion?

    Well Mt Lion is the latest, but if your machine can't do 10.8, then call Apple via phone and order 10.7
    However you really need to do your homework first, as a lot of software and drivers could stop in 10.7, no Rosetta like in 10.6, could cost you plenty.
    Things to consider before upgrading OS X

  • HT1338 I currently have Snow Leopard and am thinking of upgrading to Lion but have heard some bad things about it.  Should I upgrade or not? What do you like/dislike about Lion?

    I currently have Snow Leopard and am thinking of upgrading to Lion but have heard some bad things about it.  Should I upgrade or not? What do you like/dislike about Lion?

    It is indeed all down to what you need to do with your machine.   Snow leopard is an excellent OS and as Baltwo suggests you have to check out your current apps and programs because PPC won't work on any higher OS than the one you have.
    Andy's comment is very interesting and, I suspect, insider knowledge based     Certainly I would wait for Mavericks now it is on the horizon ... and then add six months or so for the bugs to be ironed out.
    Good luck, whatever you do.   I'm staying with Snow Leopard.

  • Upgrading from 10.5 to Snow Leopard and then to Lion

    Hi guys,  I have little knowledge about computers and can use some help.  I have Late 2008 MacBook Aluminium Unibody laptop.  It has 10.5.8 - Leopard on it. 
    I'm looking to upgrade to latest - mountain lion.  after researching I've found out that I need to first upgrade to Snow Leopard and then to Lion.
    My question is more around backing up the laptop to my external hard drive (500GB) using Time Machine.
    -Should the hard drive be completely empty or just have more than enough space to back up laptop?
    -Once backed up, do i need to restore the data only if the files get erased while upgrading to snow leopard/lion?
    -If it does get erased, how do I restore the data from the external drive?  Is it as simple as logging on to Time Machine and using a command?
    -Is it safe to back up and restore?
    I realize these questions are asked several times, but any help would be appreciated.  Thanks so much.

    Welcome to the Apple Support Communities
    1. You don't have to erase the disk. Also, your files will be kept after upgrading, because an upgrade doesn't delete anything. Just make sure that you have enough space in the hard drive to install Mac OS X.
    2. In case that the upgrade fails, you will have to restore your backup, but not before, because your files will be kept after upgrading, as I said.
    3. If you have made a Time Machine backup, you will have to start from the Mac OS X DVD that came with your Mac holding the C key while your Mac is starting, going to Utilities menu and restoring the Time Machine backup, so your Mac will be the same as it was before upgrading Mac OS X.
    4. Of course (when you restore a full Time Machine backup, Time Machine erases the hard disk), but don't do it unless the OS X upgrade fails

  • I Restored My Imac, But I Can't Install Moutain Lion As It Says I Haven't Purchased Lion. This Is Because I Went From Snow Leopard Straight To Mountain Lion. PLEASE HELP

    So my mac is pretty much useless becuase i can't install mountain lion after a restore of my mac.
    I have an imac late 2008 which i bought second hand. It only had Leopard OS X. So I bought the Snow Leopard OS X discs and installed them. I then bought Mounain Lion Straight from the app store and downloaded that.
    However I recently decided to restore it for extra space. So i restored it fine and then attempted to reinstall Mountain Lion. Then a message popped up saying that 'This Apple ID has not purchased Lion' meaning that i can't now install Mountain Lion.
    I then inserted the Snow Leopard disc and then it would not give me the option to install it on my hard drive and there was a little yellow caution sign on the picture of the hard drive.
    I am stumped for ideas now and REALLY NEED SOME HELP
    Thanks,
    Fin

    If you installed Leopard that is why you can't install Mt Lion. The system Must be running Snow Leopard 10.6.8 to upgrade to Lion or Mt Lion.
    If you only erased the Macintosh HD partition then you left the Mt Lion Recovery HD partition in tact on that system. At startup hold down the Command+r keys to boot to the Recovery HD Partition. From there erase the Macintosh HD partition and then select Reinstall Mac OS X. It should then download Mt Lion and ask you for the Apple ID that was used to purchase Mt Lion.
    The Reason Snow Leopard might not be installing is because of the Recovery HD partition. To get rid of that you must First Re-Partition the drive As One Partition. Then install Leopard then SL (Or Snow Leopard from the start) and then update it to 10.6.8. Once that is done you should be able to log on to the Mac App Store and Re-Download Mt Lion.

  • HT1758 Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion?  My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB", mine starts with a "W." Purchased direct from Apple August 2007.

    Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion?  My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.

    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Open System Profiler and report what you find displayed for the Model Identifier.

  • Complications migrating from Snow Leopard Server to Mountain Lion Server.

    I'm migrating from Snow Leopard Server to Mountain Lion Server. The article "OS X Server: Upgrade and migration" (http://support.apple.com/kb/HT5381) says
    "Make sure that any DNS or DHCP servers on which your server depends remain running during the upgrade"
    This advice is reinforced by the details of the article "OS X Server: Steps to take before upgrading or migrating the Open Directory database" (http://support.apple.com/kb/HT5300).
    As the server I'm migrating from provides these services it will need to be running during the migration process. This would seem to limit my options to doing the migration from a Time Machine backup (or, making a seperate clone of the server's drive and connecting it externally to the new box)
    My main concern is the seemingly inevitable clash that is going to occur on the network as the new server takes on the roles of the old one - while it is still running.
    What are my options here ?
    This is my second attempt as on my first try I did the migration from the TM backup with the network down - and none of my local network users or their home directories were migrated, although the settings for the mount points were, but there were no actual directories where they pointed to!
    Clear directions on how to procede would be VERY MUCH appreciated
    Thank you.

    Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
    If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
    Destroy any Open Directory replicas
    Archive your Open Directory Master (to make a backup)
    Note down your DNS records in case they get messed up
    Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
    Keep a full back of the server (you should always have backups)
    Note down your DHCP server settings in case they get messed up
    Note down any other service settings
    Install Mountain Lion
    Install Server.app
    Install Workgroup Manager (extra free download)
    Run Server.app
    Make sure settings for services are as much as possible the same as before
    If your lucky that may be all you need to do, otherwise...
    Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
    Make new Open Directory Master
    Run Workgroup Manager
    Import users and groups you previously exported
    You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
    When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts.

  • Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

    Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

    Well Lion does not support power PC applications.  They only way is to upgrade the application, or if your have SL disks, reinstall SL.

  • Need Snow Leopard (in 2013), to then upgrade further. How to get it?

    I have Leopard (10.5.8), from 2009. I need to upgrade to Snow Leopard in order to then upgrade to Lion, then Mountain Lion. How can I get / access / purchase / download / install Snow Leopard today, in 2013?
    I live in Switzerland (nearly 3 hours away from the nearest Apple Store). I no longer have any guarantee or warranty so cannot get telephone advice without paying a lot. Looking forward to hear your suggestions!

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    You should now see the App Store icon, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Maverick... is that possible? I read compatibility requirement of 10.6.8 or later...

    Hi! Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Mavericks like I was advised in the Apple/Switch store... is that possible? I read compatibility requirement of 10.6.8 or later...???? Thanks for any guidance!

    Before installation you should back up all your data.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Maybe you are looking for

  • How to use rules in BADI for 3 step approval SRM WF

    Hi all, i am working on three step approval workflow...based on the costcentre and product category it has to be approved...i have defined rule responsibility for this...now i need to bring this rule responility values to my BADI bbp_wfl_approv_badi.

  • Not updating a few songs

    I have 3990 songs showing on iTunes and 3965 showing on my ipod. Is there an easy way to figure out which songs aren't syncing?

  • How to show progress - Applet - Servlet

    Hi, I am new to applet-servlet communication. I have to show the progress at the applet front-end using a JProgressBar for a task being done at the servlet end. I request the gurus on the forum to post any example code for the above situation.

  • STO from Plant to Plant in same Company Code

    Dear All , Please give me brief idea about STO(with screen ) from Plant to Plant in same Company Code ganga

  • How to save .band files as MP3s

    I did a little editing in GarageBand to remove some white noise from a sound file, and I need to convert it to an MP3. Is there a way I can do that in GarageBand, and if there isn't, what would allow me to do so?