HT5192 ı couldt manage to download iOS 5.1 Software Update . system trying to connect to server but download don't start , what would be reason?
ı couldt manage to download iOS 5.1 Software Update . system trying to connect to server but download don't start , what would be reason?
download with itunes, or with one of your devices, and re-try, most causes it the update server it self.
Similar Messages
-
HT5192 I've downloaded iOS 5.1 Software Update into my iPad. But, it won't install. Any ideas?
I've downloaded iOS 5.1 Software Update into my iPad. But, it won't install. Any ideas?
What ios version do you have now?
Iphone 3g can only go to 4.2.1 -
my IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.
Yes I have put in the correct password, its all numbers so can't get it wrong really.
It has connected before as has my iPod and that won't connect either. I have checked that they aren't on the blocked list of the wi fi. Managed to download the new version of iOS and that hasn't made a difference.
I have the wi fi plugged directly into the computer rather than the booster hub as the computer won't connect to it when its in the hub. I did get the iPad to connect to the internet when it twas in the hub but once I upgraded the iOS it won't accept the wifi password in the hub either. -
I need help. When I download the ios 3.1 software update to my first generation ipod touch, I click download and i says it will be done in 30 minutes dont disconnect ect... Usually when i download something my ipod flashes download and it shows the time left on the top of itunes. Nothing happens today and it just stays on the instructions page. When I hit done it takes me to the appstore on my mac! HELP!!!!!
Hello mixanme,
Sorry to hear you are not able to update your iPod touch using iTunes. Thank you for providing all that information about what is going on. I found an tutorial to assist with issues updating an iPod touch:
Issues updating or restoring iPod touch
http://www.apple.com/support/ipodtouch/assistant/restore/
I hope these steps help!
Best,
Sheila M. -
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -i have paid for this, but when it goes to the itunes for downloading it says it is downloading but nothing seems to be happening. help please!
Hello mixanme,
Sorry to hear you are not able to update your iPod touch using iTunes. Thank you for providing all that information about what is going on. I found an tutorial to assist with issues updating an iPod touch:
Issues updating or restoring iPod touch
http://www.apple.com/support/ipodtouch/assistant/restore/
I hope these steps help!
Best,
Sheila M. -
Getting an error message of unable to
check for software update when trying to update to
ios 8.0.2. Can someone help ??Howdy there otss1979,
It sounds like you are unable to download the iOS 8.0.2 update either, over the air, or using iTunes. If you are updating the software on your phone in Settings > General > software update I would recommend starting with this article:
Resolve issues with an over-the-air iOS update
If you are using iTunes, I would use this article instead:
Resolve iOS update and restore errors in iTunes
If you are getting a specific error number, the following article will help you get that resolved:
Resolve iOS update and restore errors
If this does not resolve the issue, could you please write the error message you are getting word for word for me?
Thank you for using Apple Support Communities.
All the best,
Sterling -
Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart
I have the same problem and haven't been able to figure it out either
-
Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and… -
I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already
What did the error message say?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT5567 iOS 6.0 software update stuck,, said it took 7 min. Now has been 80% complete for 2hrs.
iOS 6.0 software update stuck,, said it took 7 min. Now has been 80% complete for 2hrs.
Be patient. Apple just released IOS 6.1 and their servers are inundated with downloads. The network link between you and Apple may also have some undisclosed throughput or latency issues.
I just updated to IOS 6.1 and it took much longer than I expected. -
How do I connect?
I haven't updated yet. Apple's download servers have been overloaded with millions of users trying to update.
Here's a description of the update. Not a lot of changes for iPad 1/2.
iOS 5.1 Software Update
http://support.apple.com/kb/DL1504
You can wait a while & update at your convenience, or try early AM or late PM.
Cheers, Tom -
IOS 3.1 Software Update for iPod touch failed on old computer
While trying to download 3.1 to a first gen itouch, the laptop or software failed. I want to use my new machine (which currently syncs with my iphone) to try the download again. Can I have two devices on my account/computer?
In that article, did you click on this link as it states?
-> Purchase the iOS 3.1 Software Update directly from the iTunes Store -
When I log in iOS devise it gives the message 'unable to connect to server'
When I log in iOS devise it gives the message 'unable to connect to server' while the devise is connected with excellent strength signal.
Worked for me:
Download the old Apple's "Find My Friends" app, agrre to the terms there.
Hopefully this bug will be solved soon. -
Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. I have tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway i try. I have searched answers to this but to no avail.
LeighHi Demo,
Yes, I have not made myself clear, I apologise.
I have tried downloading apps from itunes in order to set up a game for my son, when I go to click on a link, be this in itunes, or on the web, Safari revolts back informing the address is invalid. I read by coping a link and pasting into the URL, this would do it, but not so.
My goal then, is to install Minecraft for my son, I would then download an app to allow this but I am unable to get this far due to Safari insulting the address I ask it to go to
The iPad is first generation
OS 5.1.1 Software up to date.
Thank you in advance for your time
Maybe you are looking for
-
Move sign to left of quantity on alv grid with & stil total quantity column
Hi Guys, Here is my problem.. I have a column on my alv grid that is signed. I want the sign to appear to the left of the number. This column needs to be totalled so I can't use the function module CLOI_PUT_SIGN_IN_FRONT. I've also tried (as per
-
Hi all, I want to display user name using subroutines in script..my code is not working.. pls check and let me know the correct way. /: PERFORM get_user IN PROGRAM ZTEST USING &UNAME& /: ENDPERFORM. /: &UNAME&. REPORT ZTEST. FORM GET_USER USING UNAME
-
Change template in business catalyst
hi i need to know how i change my template in BC please
-
Does one know where I can find some well documented examples how to use OWF, how to create plsql code with ? The documentaitions from oracle are not usable. regards
-
How can I edit a Smart Object within a .psd file with Fireworks CS4?