HT5567 ipod toush4g blank screen white

how to fix ipod touch 4g blank screen white.?i restore but still same blank

Go into Recovery Mode per the instructions here.

Similar Messages

HELP!! I Shut my daughters IPod down in middle of updating to I.O.S 6.1.1, now IPod is BLANK SCREEN

Please help, I shut down the iPod 4th gen in middle of updating to its 6 and now there's a blank white screen, can anybody help me??

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

IPod Touch blank screen

Problems began yesterday at the gym, when playing music my iPod constantly dropped the volume itself to nothing. Then later on that evening the entire thing conked out - the screen turned black and has given nothing since. I know it's still working as if I press the home button and use the slide bar to unlock it, the unlock noise sounds you just can't see anything on the screen - it's just blank.
Is there anything I can do, as I don't have the money to pay for a new one.

Just hold the home screen button and the sleep/wake button at the same time for at least 10 seconds. Trust me, I had this problem before too.

Blank Screen (White)

I am currently attempting to assist a customer who is having trouble downloading an e-book into ADE 2.0. The installation process was successfully, their ADE copy was activated. When they attempt to download the e-book into ADE, the window will open as it should but the screen will appear blank (white) and remain that way. The title of the e-book will be listed at the top of the window as it should if the user has opened the e-book. File, Library, and Help options are missing and the customer cannot even close or exit out of the window without closing the program through Task Manager or another shortcut.
- They are using Windows 7 (32-Bit)
- I have given ADE permission to download and connect through their Firewall.
- Their firewall is using port 80 and NO CACHE is on.
- They are using Internet Explorer
- I have cleared their browsing history
- I have tried to run the program using Run as Administrator
Any suggestions/solutions?

Hmmm.
I'm not sure I can help much. I can suggest ways to narrow down the issue, but not sure if I can suggest a solution.
Getting to a DRM book is a multipstep process:
Download the .acsm file that is a token for the purchace/loan, typically using a browser to the approriate website.
Open the .acsm file in ADE.
Typically, the browser will cause this step to happen automatically when it has finished the download,
or when you click on the downloaded file.
You should also be able to do this step by double-clicking the .acsm file in file manger (Window Explorer, Mac Finder etc),
or by drag-dropping the .acsm file from file manager onto running ADE.
ADE then downloads a DRM .epub file (or .pdf file) which is the 'real' book.
You can the read the .epub file in ADE or use ADE to transfer to another device, etc.
The browser shouldn't make a difference. It sounds as if it has done its part and downloaded a .acsm file.
Check if there is an appropriate .acsm file in your downloads directory.
If so, try drag-dropping it from Explorer (or Finder or whatever) onto a running ADE.
I guess that will give the same problem, but it will at least narrow things down.
See if there is a download .epub file, probably in Documents\My Digital Editions.
If so, see if you can open that by drag-dropping onto ADE.
You could try an alternative route and use Sony Reader to do the work that would normally be done by ADE.
Free download from Sony intended to run with Sony eReaders but works quite happily without. https://ebookstore.sony.com/download/

IPod Touch blank screen in DFU mode

Hello. I have an iPod Touch 2G with software 2.2.1. Recently, I shut it down and restarted it, but nothing appears on the screen. I tried to put it in DFU mode and iTunes can see it, but I do not want to restore everything. I would be devastated. Please help! Thanks!

Yep it looks like you'll probably have to do a restore. YAY! Don't worry if you've sync'ed your iPod over it will automatically back up all of your stuff and after a restore will ask you if you would like to restore from the backup. Just select your latest backup and click restore and it will be exactly how you left it after the sync is complete. So to get started just put the Pod into DFU like you did originally. You will have iTunes say an iPod has been detected in recovery mode... blah blah blah so just hit ok. Next you will see the restore button in the iTunes window. Hold down the option key and click on restore (Shift+click if you're on Windows). You will be presented with a drop down window. In there navigate to...
/Users/"YOUR ACCOUNT"/Library/iTunes/iPod Software Updates/
In there you should see iPod2,13.1.2_7D11Restore.ipsw if your on 3.1.2 and it is a 2nd gen touch
OR
iPod1,13.1.2....ipsw if your on 3.1.2 and it is a 1st gen touch
Select the appropriate firmware file and hit choose.
It'll say extracting and do the normal stuff.
When that is over. You will be presented with the iPod setup page and it will ask to setup as a new iPod or restore from backup. This is where you click restore from backup and select the LATEST backup you have (It'll come up in a window with all the backups that have been performed). The iPod will sync for a while depending on how much stuff you had on it. YES THIS INCLUDES EMAILS, SITES, APPS, MUSIC and all the other stuff. So it'll pretty much be exactly how you left it.

Blank screen - white flashes

I'm making software tutorials, recording voice, tracking
mouse clicks, moving screen around etc. Playing on our Intranet
there are quite a few of these dropped frames. Files sizes are
small 5-9MB, no transitions, standard compression. Playing locally
I don't see these dropped frames or see blank frames in the
recordings. Any idea how to fix?

Hi Sharonb,
I think we will need more information to give you some
possible solutions. How many slides on average does your software
tutorial project have? Are the file sizes of 5-9MB the raw
Captivate (CP) files or the sizes of the final published output
(SWF)? When you look at Windows task manager, what percentage of
the cpu time is being taken up with playing your project? Are you
linking one software tutorial project to another when playing the
final output?
The reason I ask is that when linking one project to another,
there is a delay in showing the new project. Locally you won't see
anything but pulling the files over a network will show up the
delay. Also if your Captivate project has too many slides, then you
run out processing power to do nice things such as animation and
sound, resulting in dropped frames.
Hope that helps.
Dominic

Yellow Connect to Power Message - Now iPod has Blank Screen

Hello and Help. My Third Gen Nano 4 GB has gone dark... right before I saw the "Connect to Power" with a gold warning triangle message. I've tried all the menu/reset thing with no luck and I can't get the iPod to show up on iTunes.
Does anyone have any ideas? I'm hoping it's not the battery as a battery costs half the price of a new iPod, but it's sort of looking that way. But before I gave up I thought I'd see if anyone might have an idea.
Thanks!
Scott

Yep, it's the battery. Same answer as the other post right before you.

Help my ipod has blank screen!!!

hellp i was using my ipod touch then its turned off and i was litening to some music the the music still on after it turend off then the music stoped

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

Transaction launcher displaying blank screen (Empty without any fields)

Hi Experts,
                   Recently we have done the upgardation from CRM 2007 to CRM 7.0. In our old version we have configured Transaction launcher and everything was fine. But we are facing an issue with transaction launcher calls in our new system. Apart from the existing TL configuration below are the steps did in the new system (after upgradation).
1. Activated the Webgui ITS service from the path sap/bc/gui/sap/its/webgui in the remote system (ERP) through SICF.
2.Published the internet service SHUFFLER, SYSTEM, WEBGUI through SE80 in the remote system.
3.checked the configuration for logical system in transaction CRMS_IC_CROSS_SYS and the URL of ITS is in the form of
   http://<host>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXEokcode=ICEECUTE
Till this part every thing looks fine and if execute the URL in the browser, it is taking me to the ERP system login screen and i am able navigate to any transaction.
But if i login to CRM interaction center and clicking on the TL links, its not displaying any login screen( Remote system) and not even displaying any message or any fields. Its just displaying a blank screen (White Screen) in the same window.
Please provide your valuable suggestion to resolve this issue. Thanks
Regards,
Laxman.P

Hi,
     sorry, it was a typogrpahical error in my query. I have mentioned the correct link in my customization
       http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
Regards,
Laxman.P

IPOD Help~(cannot view anything except a white blank screen)

Alright...I never expected to post up something in this discussion thread this soon...since I got my 30gig iPOD just three days ago...and curious as I am to things...I think I broke it, hah~
Anyways...I need some help.
Here's the story.
I was updating my iPOD to a newer version, I'm assuming...and during the updating process...I accidently 'x'ed out of the box...and now my iPOD screen does not show anything except for a white blank screen. If I hold down the menu and center button for six seconds...It shuts down...but when I release/let go of the buttons...it makes a ring sound and goes back to the white blank screen.
And also...when I go to the start menu and look under the iPOD folder...it has an update your ipod thing...I clicked it...and it pops up with a screen, saying stuff like it's 'initializing'...and tells me to plug in my iPOD with the usb chord...but I get a message saying 'can't mount iPOD' or 'internal error'
I think I've tried anything there is to solve this problem...like the five R's...etc.
I do not want to think that I broke my iPOD already. So if anyone knows, please reply back.
Thanks in Advance

Hi Sky,
Hmm - I see the shapes, I'm not sure why they're disappearing when you draw them - too simple of a file to point at some other issue. It seems like something with the installation went wrong or is missing (the player that renders the Stage for AS3 documents). I think the first thing will be to get the update. Can you try downloading from this page instead of through the update manager? http://www.adobe.com/support/flash/downloads.html Then try running the executable that you download. If this doesn't fix it, Flash may need to be fully removed and reinstalled.
Jen.

I have 60gb ipod classic. Music plays, but screen is blank or white.

I have 60gb ipod classic. Music plays, but screen is blank or white. Resetting has not worked. Lines show when reset, but no Apple logo. Is display shot?

Hello Paul,
I would be concerned too if my display on my iPod classic was not working. I recommend going through the steps in this tutorial. If it is a software issue, these steps should resolve the issue:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thank you for using Apple Support Communities.
Best,
Sheila M.

My ipod touch is showing a white blank screen, have tried resetting it but doesnt work????any suggestions?

my ipod touch is showing a white blank screen...have tried resetting it but nothing! any suggestions??

Let the battery drain completely. Then let it charge for about an hour before trying another reset. Helped with mine.

IPod 4th Gen has white screen after replacement, and restore

Okay. Here's the problem. A while ago, I dropped my iPod, and it's screen cracked. I've been living with it ever since perfectly, but just with a cracked screen. Now, I ordered a new screen, and I begin to replace it. I knew how, and like an easy job, I did it pretty quick compared to others. After both ribbon cables where in, I pressed the lock button, and my iPod had a white screen. I was a little worried about that, so, I tried to reattach the screen. Now it was just black, after even using the home and lock button restart method. Eventually I got it back up and to the white screen by draining the battery and recharging, and there I was again, stuck. I looked at some forums on the internet to try to see if anyone had my problem. After clicking on the first link, it turns out, alot of people had this problem as well as me. The solution they said was pressing the home button and lock button for about 10 or so seconds, and then it goes to the apple screen and is all better again. I tried it, and my home button broke. Great. So, now I had to use the little button that the home button was pressing down to try the solution. Tried it, and, nothing. Still the blank, plain, white screen. Looked some more and saw that pressing the home and lock buttons along with the volume up button worked for some people too. Tried it, worked just as good as the previous one. Nothing. I even tried some person's idea of doing home, then volume up, then lock, in different timed stages. Nothing. I also saw people begging for them not to restore their iPods and begging for a solution. I was fine with a restore, I just had games that I played on my iPhone as well. So, I went with it, and restored it, without any backups, just going to factory mode. Afterwards I heard my iPod make the iOS "plugged in" sound, and anxiously tried the lock button. Still had the white screen. STILL. Now, I'm here, begging for a solution like others, with an iPod that won't function properly. Can someone please help me?

No nothing like that happened, I'm sure, but I actually spent the day looking for a fix. Luckily, I had the idea of taping the spring down because I though the screen didn't touch it. Turns out I was right, but however, I found out that the screen I ordered was broken in a way, because it still had the white screen after the taping. Just to make sure, I tried the other screen to clarify if the taping worked or not. I did the home and lock button restart, and up popped the apple logo. So, that means that the screen I got from the seller was either a rip-off, or was just broken somehow in process of making, or delivering in some matter. Unfortunately, I think I can't ship it back unless for alot of money because the person I got it from comes from China. I live in the USA. So that's gonna be a matter to work with myself. Thank you for trying to help.

IPod has a bright white screen?!?!?!

My iPod has a bright plain white screen?! I tryed resetting it nothing happened. I tryed connecting it to my laptop and my my iTunes doesn't do anything like it doesn't exist. I already held the center and menu button in the same time and it turns off for 10 seconds but that white bright screen appears again? What shall I do someone please help me out?! =)

See if this helps.
iPod 5th gen (with video) shows blank or white screen.

HT5567 ipod toush4g blank screen white

Similar Messages

Maybe you are looking for