HT5622 In trying to update my iphone 4 my WHOLE system was erased, what do I do now? Also it doesn't seem to matter what I use for a password my phone won't accept it, says dismiss!
My iphone 4 is gone! I was updating it via my laptop and when I came back to it everything had been erased, and I mean everything, now I have no activation, no phone and until just a few minutes ago it wouldn't accept any password I used, so now what do I do? Should I take my phone to Verizon and let them take care of it? I seem to be getting nowhere on my pc. Thanks for the help!
Is your iPhone 4 GSM type or CDMA ?
Similar Messages
-
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
-
I tried to update my iPhone 3GS with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?
Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea. -
I tried to update my iphone through my itunes and recieved an error message. The phone then became frozen on the conect to itunes screen and I can not use the phone. I tried to reconect to itunes but it does not recoginze my phone it just stays frozen.
Try recovery mode as described here. You may have to try to get into recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808 -
Hi there, i recently got my iPhone 4s from Canda and now im using it with an Australian SIm card ( yes it works ).
My iphone 4s is still running on iOS5.0.1 and i just tried to update it through my phone (not on the computer). When it finished updating, there was a picture on my phone with the Plug sign and the Itunes sign. So i thought that i had to restore it, not much of a problem.
After i restored it, the same picture kept coming up. *plug into itunes* and now i cant use my phone.
Someone please help
thanks in advance,
BrianSorry i meant iOs5 to ios 5.0.1
-
Help. I recently bought a 2008 Mac Pro from Mac of all Trades. It came with Leopard 10.5 installed. When I set initially started the computer, I followed the instructions on the screen. I was asked to set up a password which I did. Since I'm very forgetful and not too tech savy, I wrote it down as I typed it in. I first went to install Office Mac 2011 but when it asks for a password, it won't accept the one I set up. I was told that if I bought the new Snow Leopard 10.6.3 and installed it, that it would reset everything. Well, it won't allow me to load it without the password. I am new to Apple - this is my first. I have always been able to "reboot" a computer with discs but I'm not sure how to do this one. Is there a way to do it without the password and reset everything? Could somone please email me
Thank You. David Moore
<Email Edited by Host>If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard. -
Hi there, I'm having problem downloading latest version IOS 0.6? What to do it only giving me erroe message 3194? could you please help??
http://support.apple.com/kb/TS3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
HT4623 i tried to update my iphone 4s to ios 6 wierlessly and it dosent turn on now
please help me
As you were told in your previous post asking the exact same question, no.
You must restore your iPhone. The answer will not change no matter how many times you ask. -
I restored my ipod to its orginal settings and checked for it to be backed up. When it was done restoring i tried backing it up and it said to enter the password. I didn't know if it was my itunes password or what so i entered several and it said they were all wrong. So which password is it?
Is this the error message that you see?
"Disk cannot be read from or written to" error syncing iPod in iTunes.
If nothing else works, you could try a format of the iPod in Windows. A full format does a check and remap of bad sectors on the iPod hard drive, and you would need to restore the iPod as normal (using the iPod updater) afterward. This can also work when the iPod is recognized by the computer, but not by the updater. It's usually a last ditch troubleshooting effort.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
If you need to, reset the iPod to exit disk mode. -
My caps lock was stuck when I shut down my computer. It is coming back up in safe boot (I had spilled liquid on it).
It's asking for my password - which has some lower case letters...So now how can I get in?
Is there a way to change this password or something?
I have a wireless keyboard, but it wasn't set up - so, It's not recognizing it.
Any ideas?Take your computer to get the keyboard replaced, your lucky it didn't trigger the moisture sensor and brick your machine, so your chances of the machine working well after the keyboard is replaced is likely very good.
As long as the main keyboard is sending a caps lock signal, it's not going to work even if you get in.
If you need to remove files off the internal drive, use a Firewire cable (800 to 400 adpater may be needed) and hold T to boot the problem Mac into Firewire Target Disk Mode and connect the cable to another Mac, the hard drive will appear on the desktop which you can then remove/erase files. -
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
I tried to update my iPhone 4S but I now keep getting an error saying I need to restore my phone before it can be used because it's in recovery mode! But if I restore it I lose all my media and data and I don't want to do that! Is there anything I can do?? Somone please help, i'm freaking out over here!
Anything that was on the phone is already gone. You have no choice but to restore. If you were backing up and syncing the phone on a regular basis, you should be able to restore your backup with minimal data loss.
-
I am trying to update my iPhone to 5.1 and a window comes up saying: "An error occured while backing up this iPhone (-5000). Would you like to continue to update this iPhone? Continuing will result in the loss of all contents on this phone." Any help out there? Thanks.
continue to updatae your phone.
-
I'm trying to update my iphone 4 with ios7.0.4 and I'm showing a a plug that must go to my itunes. when I do that it says it has to restore my phone to manufactory setting. is there any way around this
No. Make a backup first.
Maybe you are looking for
-
Print html file with barcode from abap report
hi i am printing html file from abap program using gui_execute. i am using netscape.exe , its printing first time and when reprint its not working basically html file contains gif file which has fedex barcode. could you please let me know how to prin
-
Export/import preferences configurations?
greetings, back in the olden days, before OSX, i used to save my systems configurations. for example, os9 and before, i could save my locations, printers, etc... i have both a desktop and a macbook pro, and at home a powerbook and a new MBPro and som
-
If someday my harddisk breakdown or my computer might get stolen, I would like to be prepared and backup the files, that are made when syncing with iTunes. But where are these files ? I have done a search, and I guess that they might be located here
-
Failover/Registered token issue
I have a system that utilizes registered tokens. The secondary sun server in the FOG went down so I had to get it repaired and had to reinstall the OS and sun ray software from scratch. I have installed it to match the specs of the primary server and
-
Wordpress - as a website developer, is it worth learning?
I've always made websites with Dreamweaver using HTML, CSS, and Jquery. If the client wanted a CMS, I used CushyCMS or Pagelime. I haven't done an eCommerce website, but if I was called upon to do one, I guess I would have installed Shopify or someth