HT5661 hi. I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening
I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.
Similar Messages
-
I'm trying to set my computer back to factory settings, to make it like new. How do I do that?
Throw away any files which may contain sensitive data and securely empty the Trash.
If it shipped with Mac OS X 10.6.8 or earlier, connect its original thumbdrive and restart the computer with the Option key held down.
If it shipped with Mac OS X 10.7 or newer, restart with the Command and R keys held down.
Use the Disk Utility to erase the partition with Mac OS X installed, and then install a new OS onto it. If you used a disk and are going to sell or give away the computer, include the disk with it.
(92603) -
One of my apps (condition report app) has decided to only display on the top right hand corner which is only a quarter of the screen, not sure what has happened as i have not changed any settings went to go into it one day and it was just like it.
Please help!!!! Thanks KristyDo you have the most up-to-date version of the app? Did you upgrade to iOS 6? Did you check to make sure that the developer has updated the app for the new OS? Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? Have you tried uninstalling and re-installing the app?
-
I tried to set my computer back to factory settings by holding down the command + R key and when I turn on the computer it brings me to mt login page for my password
In order to return your computer to factory spec you need the discs, there is no other way. You can call AppleCare and give them the serial number and they'll ship you a set of the original discs for a fee, or providing that you have at least 1gb of ram you can purchase and install 10.6. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
-
I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.
-
I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Is there someone out there that can help me out? I would appreciate it!
Hi NYYJMM,
Thanks for visiting Apple Support Communities.
You may want to reset your iPod nano and then sync again. If the issue persists, restore your iPod and try again. See these articles for the steps:
How to reset iPod
http://support.apple.com/kb/ht1320
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Best Regards,
Jeremy -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
Tried to restore iphone 4 back to factory settings now on emergency call only screen?
tried to restore iphone 4 back to factory settings now on emergency call only screen? it also says hook phone up with itunes. well i have an old mac and my itunes isnt up to date and cant be installed up to date because of the old software. what do i do?
You'll need to update your system or fine a system you can use to activate it. There's no way around it.
If you can get to an Apple store and explain the situation to them, they 'may' be able to hook you up with an OS upgrade to Leopard assuming you have a G4 or G5 mac that can handle it. -
Any help with errors setting IPAD back to factory setting? I received this error when trying to back up - backup session failed. Has any one had the following errors when trying to sync to computer?
1) the IPAD cannot be synced, an internal error occurred. 2) required file not found. 3) a folder specified instead of file.
Any help appreciatedType "13019" into the search bar at the top of this page by "Support" and read the resulting help articles.
-
Hi there!!...my ifone4s is no longer producing sound of any description with the exception of the earphone jack!!! I am running iOS 6.1.3....i have tried reset,restart and restore----no joy....i have cleaned the dock port and speaker and mike area ----no joy! Now my question,,,is this a hardware malfunction or a bug from the iOS???..this is a replacement fone (march 2013) my previous fone suffered a wifi antennae breakdown after an iOS update!!,,,covered under warranty...this fone is now given trouble,,is this fone covered under warranty surely li should get more than three months outta my new fone - no???...any advice or help from anyone will be greatly appreciated especially as regards warranty...thanks in advance for looking...
If you use eabuds or headphones on occasion, try inserting and removing the earbuds/headphones several times in a row.
An exchange under warranty remains under the same warranty period as the original purchase. If an exchange under warranty is provided within the last 90 days of the warranty period, the exchange includes a full 90 days of warranty coverage. -
I need to free up space on my macbook pro as hard drive is full!! So with 20 000 photos/video clips and itunes I would like to move this to a external hard drive!
I have followed steps on apple support but when i get to the Change itunes media folder location and chosen external hard drive it will not let me access the new folder option ?? help?errrrrrrm!
Yes external drive shows up in finder on desk top and can change to in the media folder location thing!
My external hard drive is a WD Elements. I have no idea about permissions to the external? Do i Have to format external hard drive to a mac?
I am trying to follow the steps on the apple support page to transfer files (consolidate library etc) just cant get further down steps as the new folder option is greyed out!
Thanks for you help -
I recently got this Ipad2 in hopes for a working device. I had originally stated it up by syncing it on my sisters pc but by doing so the app store on the Ipad automatically gave me her husbands Apple ID instead of my own. I'm well aware that by syncing with her Itunes library something like this may have come as a result of it. So, I took it home and tried reseting it to its factory settings so that I was able to put up my own Apple ID and download some fun and helpful apps. I connected it to my notebook and had Itunes reset it which made it download something that took more than half an hour to do. It had told me that once it was done downloading this it would automaticlly set the Ipad back to its original state. It did no such thing. Now im trying to start the thing up and Itunes keeps telling me its unable to do so at this time. If you have had a similar situation and know of a possible solution please respond to my question. Much appreciated.
Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I am trying to set up icloud on my macbook, I was using the step by step guide on the site but when I try go into system perfences in there is no icloud icon under internet and wireless. How do I get it?
This is presumably because you are running an earlier system than Lion. (Please always post your system when you have a question.)
The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further. -
How to set apple tv back to factory settings
I have the new Apple TV - the black one and I Jailbreaked it using SeasonPass so I could instal FLASHTV and watch AVI files but now I want to set it back to its default factory settings - how does one do this?
Reload iOS when it's connected to iTunes direct on your mac
-
I needed to reset the original settings on my ipad 3 so did a back up on icloud.first. I now want to restore my back-up but although connected to wifi, I am not getting the setup assistant up that will enable me to do the restore.
Welcome to the Apple Community.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.
Maybe you are looking for
-
Hi, I am trying to group by information in Discoverer but results are not coming out as I expect. Imagine this, we have sales orders, each sales order has many lines (items within the order). I want to group by orders, so each row will represent only
-
Maximum number of podcasts?
Dear all, For some reason, iTunes refuses to upload more than 3 episodes of a particular video podcast to my 5G iPod. The podcast URL is: http://www.29hdnetwork.com/index.xml and contains a large amount of episodes. I have iTunes configured to update
-
[nQSError: 17020] and [nQSError: 17001] when Populating Data
Hi All, I am getting the following error under when Populating Caching Tables for Marketing. *An Error is displayed as [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist .* *[nQSError: 17020] A bulkInsert state
-
I know how to add comments (i.e., the feature in the toolbar) to cells. Unfortunately, the comments clutter the spreadsheet and prevent viewing the spreadsheet figures, as the comments float on top of the spreadsheet cells. Is there any way to add
-
Acrobat Pro v. 11.0.0.7 Update fails
I've tried repeatedly to update Acrobat 11 to 11.0.0.7 both from Acrobat Help and from download and it continually fails with error code 1603. Should I even bother to install it? I'm running MS Win 8.1, Any recommendations?