HTM in use
Hey guys,
I downloaded the windows media player and installed it. I got rid of it but for some reason when i click on secure empty trash it keeps telling me that "HTM is in use" and that it can't perform the operation. Any ideas as to why this is happening and what i can do to finally delete it. Thanks.
Hello! Several things might help but the first is to hold down the option key and empty the trash. Next you might try opening the activity monitor in the utility folder and see if an activity related to it might be running and quit the process. And starting in safe mode by holding down the shift key might let you do it also. Tom
Similar Messages
-
Dear Sirs,
I hope to be directing my question into the correct forum's place.
I'm new in flash and I'm trying to make some tests
My problem is the following:
I included one SWF file into 3 HTM pages.
This SWF works as a little menu.
The SWF file (named "menu.swf") contains 3 items working as command buttons to access the three different HTM pages
Each HTM page contains the same "menu.SWF" file, some HTML text and one picture.
The swf contains:
Button 1 -> calls page1.htm using:
on (press) {
getURL("./page1.htm", "_top");
Button 2 -> calls page2.htm using:
on (press) {
getURL("./page2.htm", "_top");
Button 3 -> calls page3.htm using:
on (press) {
getURL("./page3.htm", "_top");
When I enter to "page1.htm" it appears correctly showing the swf file and all the HTML text.
It is OK.
But when I'm in "page1.htm" and I click on "Button1" (to reload "page1.htm") the only thing that I can see (after reloading page1) is the HTML text and the picture, but I cannot view the "menu.swf" file.
"menu.swf" remains in its place, but "invisible".
You can click on its command buttons, but anytime I click on the button that loads the same page (for example: "Button 1" to reload "page1.htm") the
swf file(s) doesn't appears.
The same thing happens when I'm in page 2 with Button 2 to reload page2 .htm, and so on.
How can I do to solve this problem?
Sorry for my not good english but I'm spanish speaker.
Thank you!
GusThe path in the buttons is not correct once you navigate to the htm page.
So here you are on the landing page and the menu button says to get to "page1.htm" go up one folder level (../) to the file page1.htm.
Now once you are up one level, either you loose access to the .swf because from that page the path to the .swf is not correct, or if the .swf does show, then the path in the buttons back to the other pages is not correct, because you are now one folder level higher.
If I am mis-reading your post and all pages are in the same folder, then remove the "../" part before the page name in the URL. Or perhaps you are using ./ to denote the current directory... I'd still suggest removing it. So the the getURL would look like this :
getURL("page1.htm", "_top");
if all pages are in the same folder.
And if I am reading your post correctly, then you cannot use the same button URL to get to ("./page1.htm", "_top"); and once on page1.htm use that same URL to get back down to your landing page.
So I'd say it's a pathing problem.
Give that a try and see if it helps.
Best wishes,
Adninjastrator -
Cannot empty trash due to htm in use.
1. I do Finder>empty trash get a message "wmphelp.htm" is locked. I remove the file from the trash and do FILE> GET INFO, and it shows the file is UNLOCKED. I put the file back in the trash.
2. Next I do FINDER>SECURE EMPTY TRASH and I get the message "The operation cannot be completed because the item "htm is in use".
My question is how do I stop "htm" long enough to empty the trash?
Thank you in advance,
ArtI gather you are trying to delete Windows Media Player. Generally if you hold down the Option key on the keyboard and select empty trash everything in the trash gets nuked, locked or unlocked. Make sure you don't have another copy of WMP running...
Francine
Francine
Schwieder -
Shockwave causes crash on htm page using SMUS
I am currently working on a multiuser chat program that is to
be embedded into a webpage. I am running into a problem though
after the program connects to the server. For the most part it
works fine during run mode, but when you try to quit the program by
closing the window, going to another website, or in any other way
that I've found causes the browser to crash (the standard Internet
Explorer has encountered a problem and needs to close error) When I
click for more information on the error it lists dirapi.dll as the
source of the problem. Dirapi.dll is part of shockwave, so I can't
be sure if it's just saying that shockwave in general crashed or
shockwave overall crashed, but in any case, it lists it as the
problem.
I've tried everything I can think of to solve this problem
and I just can't figure it out. I've tried rerouting all xtras to
local files, tried a whole lot of things to clear globals and
connections before quitting, letting the movie just run out into
nothingness... I'm out of ideas. Your help would be greatly
appreciated
Thanks,
JohnathonI've decided to post the script to see if any of you can find
a problem with it that might be causing my problem, so here it is:
global sConnect, MuteCountdown
on stopmovie
sConnect = 0
clearglobals
end stopMovie
on DefaultMessageHandler
global sConnect, uname, passphrase, IAmAdmin, IAmMod,
IAmGuide, MuteCountdown
newMessage = sConnect.getNetMessage()
errCode = newMessage.errorCode
if errCode <> 0 then
alert "Error: "& errCode & " : " &
sConnect.getNetErrorString(errCode)
else
if newMessage.Subject = "OkayToLog" then
play frame 30
end if
if newMessage.SenderID = "System" AND newMessage.Subject =
"ConnectToNetServer" then
play frame 5
end if
end if
end
-- LoadMeUp
-- Command lines that run when the login button is pressed
-- Creates the multiuser xtra instance and the connection to
the server.
on LoadMeUp
set uname = field (member "username" of castlib "Internal")
set passphrase = field (member "password" of castlib
"Internal")
sConnect = new(xtra "Multiuser")
errCode =
sConnect.setNetMessageHandler(#DefaultMessageHandler, script 1)
errCode = sConnect.ConnectToNetServer( uname, passphrase,
"server.theserv", 1626, "MainMovie" )
play frame 4
end
-- LoadCharacterCommand
-- The script below is the problem causer. I'm not sure how
to clear it
-- in the on StopMovie command.
on LoadCharacterCommand
set uname = field(member "Username" of castlib "Internal")
set passphrase = field(member "Password" of castlib
"Internal")
set CharDt = uname & ":" & passphrase
-- The Commented line below is how I would normally send a
command like this, the one below is how I have it set now, it makes
no difference which I use. They both cause the crash in the end.
-- errCode =
sConnect.sendNetMessage([#recipients:"system.script",
#subject:"LoadChar", #content:CharDt])
errCode = sConnect.sendNetMessage("system.script",
"LoadChar", CharDt)
end -
SSO to Non-SAP using login-tickets
Hi all,
I'd like to set up an SSO connection to a non-SAP HTTP system by using the SSO web filter (iis_sso.dll) on IIS 5.0.
I've created an iView (using the application integrator) with the URL template : http://<ip-address-host>:82/reqvars.asp?<Authentication> in which <Authentication> is MYSAPSSO2=<Request.SSO2Ticket>. The reqvar.asp page comes with the web filter as an example and displays all HTTP header fields. That way you can check whether the user-ID has been extracted successfully from the SAP logon ticket. However, I fail to get any value into the REMOTE_USER variable. The ISAPI filter (iss_sso) has been installed (global) successfully.
I'm using the following settings in the verify.properties files:
remote_user_alias = REMOTE_USER
pse_file = C:\SSOFilter\verify.pse
application = portal
log_file = C:\SSOFilter\filter.log
log_level = 3
Remark: in the original example the remote_user_alias is set to REMOTE-USER: However, I feel this is wrong since the actual variable is REMOTE_USER. Also I have seen this one in another forum post as being a working properties file. Or should I use original value?
No entries are being written to the log so I believe nothing is happening at all.
The SSOFilter folder contains the following files:
iis_sso.dll
sapsecu.dll
sapsecu.lib
verify.properties
verify.pse
mfc71.dll, mfc71u.dll, msvcp71.dll, msvcr71.dll and sapsecin.exe
This folder also has been added to the environmental PATH variable.
Any suggestions would be highly appreciated (and rewarded ,
FrodoHi,
I dont have much info related but i can giv u hint
refer OSS Notes 442401 and 723896.
When using SAP logon tickets for non-SAP applications, two different implementation options are available. The difference lies in where the ticket verification takes place.
In the first case, the SAP logon ticket is submitted to the web server filter located on the web server. The web server filter verifies the portal serveru2019s public key
certificate using its local Personal Security Environment (PSE) and then populates the HTTP header field with the user ID for SSO to the non-sap web application.
In the second case, the SAP logon ticket is sent to the non-SAP application, which then verifies it using the ticket verification DLL and submits the user ID to the application for SSO.
You can refer following link :-
http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
user authentication and SSO
http://help.sap.com/saphelp_nw70/helpdata/EN/8f/ae29411ab3db2be10000000a1550b0/frameset.htm
Authentication Using a Directory with SSO Integration Using Logon Tickets
http://help.sap.com/saphelp_nw70/helpdata/EN/f8/3b514ca29011d5bdeb006094191908/frameset.htm
SSO
SAP Logon Ticket-based Single Sign-On
http://help.sap.com/saphelp_nwce10/helpdata/en/45/b6af743753003ae10000000a11466f/frameset.htm -
SSO to non SAP Application using SAP Logon Ticket
Hi Experts,
I Have EP 7 SP 15 using SPNego Wizard to SSO with Active Directory and SSO between EP and ECC using SAP Certificates.
Now I have a demand to SSO some JAVA based applications (non SAP) to my portal using the SAP Logon Ticket.
I Have followed some blogs that directed me to use SAPSSOEXT (some libs) to read the MYSAPSSO2 cookie. The problem is that I didn't found this cookie, I even executed the command javascript:document to look for this cookie but the browser just show me the JSESSIONID info.
Does anybody knows where I can find this cookie or if there's a better way to set up this SSO? It´s necessary to say that I cannot SSO these application to the kerberos protocol because some security reasons on my company.
Thanks
ArmandoHi,
I dont have much info related but i can giv u hint
refer OSS Notes 442401 and 723896.
When using SAP logon tickets for non-SAP applications, two different implementation options are available. The difference lies in where the ticket verification takes place.
In the first case, the SAP logon ticket is submitted to the web server filter located on the web server. The web server filter verifies the portal serveru2019s public key
certificate using its local Personal Security Environment (PSE) and then populates the HTTP header field with the user ID for SSO to the non-sap web application.
In the second case, the SAP logon ticket is sent to the non-SAP application, which then verifies it using the ticket verification DLL and submits the user ID to the application for SSO.
You can refer following link :-
http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
user authentication and SSO
http://help.sap.com/saphelp_nw70/helpdata/EN/8f/ae29411ab3db2be10000000a1550b0/frameset.htm
Authentication Using a Directory with SSO Integration Using Logon Tickets
http://help.sap.com/saphelp_nw70/helpdata/EN/f8/3b514ca29011d5bdeb006094191908/frameset.htm
SSO
SAP Logon Ticket-based Single Sign-On
http://help.sap.com/saphelp_nwce10/helpdata/en/45/b6af743753003ae10000000a11466f/frameset.htm -
I am running Labview 6.1 and am simply trying to learn about the CGI VIs from the examples. I set up the Web Server root directory and I have the cgi-bin directory in it. When I view the provided index.htm file using http://localhost/index.htm, I see the web server document (so the server is working???). I go to the CGI examples and click on the link for CGI Basics. Everytime I click on the link, the vi tries to download with a prompt for SAVE or OPEN. If OPEN is selected the vi opens but does not run. I thought it might be a problem with the browser being on the same machine, so I went to a machine without Labview installed and it still tries to download th
e vi locally from the server. I assumed from the documentation that the vi runs on the server and sends a request back in html form. I must have missing something or setup wrong. Any help would be deeply appreciated!
Setup (In case it matters)
Labview 6.1
Internet Developers Toolset 5.0
Windows XP Pro and Windows 2000 Pro (Tried both)
Internet Explorer 6.0
Happy New Year to all!!!I am not sure what the problem could be and I am a little confused about the exact steps you took. I launch LabVIEW, start the HTTP server, point my web browser to http://localhost/index.htm. This brings of a page entitled G Web server. I click on the button to "View CGI Examples" which redirects by browser to http://localhost/examples/index.htm . I click on CGI Basics and go to http://localhost/examples/basics.htm .
This page has four groups of examples and within each group there are several examples. All of the examples I clicked on redirected my browser. Is this what you see?
Was the message to save or open from the browser or from LabVIEW? If it was from LabVIEW, then you might consider mass compiling the VIs on your computer. You can do this
by opening LabVIEW >> tools >> advanced >> mass compile.
You might also try a reinstall of the Internet Toolkit. The examples may have been corrupted.
Finally, LabVIEW 6.1 introduced remote front panels. You might find them easier to use than CGI scripting. -
How To Use SPDD and SPAU Transaction in An Upgrade Project
Hi Friends,
I will be working in an upgrade project very soon. this is my first experience for Upgrade project. Though I know these two transaction are used for Upgrade.
Can anyone give me a step by step document for using these two transactions and other relevant information.
Also, I have one query where do we use these transactions : On the old system e.g. R/3 4.7 or ECC 6.0
Thanks,
Pradeep
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 10:39 AMHi Pradeep,
For SPDD see this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/2e/6d66587d9011d396b60000e82de14a/frameset.htm
For SPAU
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c8/61ec66e33611d1954b0000e82de14a/frameset.htm
Why you need this Adjustments
http://help.sap.com/erp2005_ehp_03/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/frameset.htm
You use the transactions in the new system.
Regards -
DB Version :10.2.0.1.0
Sometimes i want to collect the stats of just few tables. I use the following script to gather individual table stats. Are these parameters OK?
begin
dbms_stats.gather_table_stats(user, upper('table_name'), estimate_percent=>100,
no_invalidate=>false);
end;
/Hi,
Check this links
[GATHER_TABLE_STATS Procedure|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_stats.htm#i1036461]
[Using the DBMS_STATS-package|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:735625536552]
[Analyze and DBMS_STATS|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4347359891525]
Regards, -
I use Cisco DHCP I can not get the IP from manual binding.
Good day,
I am using a Router Cisco 1841 as DHCP Server and I trying to configure a manual binding but is not working, here is the configuration:
Router#sh run
Building configuration...
Current configuration : 1026 bytes
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot system flash c1841-adventerprisek9-mz.123-11.T10.bin
boot-end-marker
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip cef
ip dhcp excluded-address 172.16.12.1
ip dhcp pool Test
host 172.16.12.254
hardware-address 0100.016c.cbaf.31
client-name Test01
ip ips po max-events 100
no ftp-server write-enable
no crypto isakmp ccm
interface FastEthernet0/0
ip address 172.16.12.1 255.255.254.0
speed 100
full-duplex
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface ATM0/0/0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface Serial0/1/0
no ip address
shutdown
no fair-queue
clockrate 2000000
ip classless
ip http server
no ip http secure-server
control-plane
line con 0
line aux 0
line vty 0 4
login
end
Router#sh ver
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.3(11)T10, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 03-Mar-06 17:40 by dchih
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
ROM: Cisco IOS Software, 1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(3c), RELEASE SOFTWARE (fc1)
Router uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1841-adventerprisek9-mz.123-11.T10.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1841 (revision 6.0) with 236544K/25600K bytes of memory.
Processor board ID FTX1013W27Q
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 ATM interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Router#
Thank You Very Much
Regards
HGHello Hernan,
The provided MAC address contains an ethernet media type. Try changing the ethernet media type to .66 as per documentation.
hardware-address 0100.016c.cbaf.31
-------------------------------------------^
Alternatively you can remove the last three characters ".31" from the configuration.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hiad_c/ch10/hipdhcps.htm#wp1074511
Use "debug ip dhcp server" to see what happens during DHCP negotiation with client/server.
HTH
--Leon
* Please rate posts. -
How to use lexical paramter in oracle reports
I have a query like,
select * from t1 where &c1=:v_srep;
where t1 is tablename
c1 is column name
How do I create &c1 and how should I populate it ?
Thanks,From Oracle 8.1.5 database, we can use dynamic ref cursors.
With dynamic ref cursor we can really avoid the use of lexical parameters in Reports.
With static ref cursor this is not possible in all cases.
For example, if we need dynamic WHERE, we practically can't use static ref cursor.
But, problem is that Reports needs static ref cursor type for building Report Layout.
Solution (as i know, first published in my post in MetaLink Reports Forum,
thread "Report based on Ref Cursor or PL/SQL Table", 24-Aug-01) is:
in package specification we must have both ref cursor types,
static for Report Layout and dynamic for ref cursor query.
Dynamic ref cursor examples:
"Dynamic Table in the Second Query with Oracle Reports"
http://www.quest-pipelines.com/pipelines/plsql/tips03.htm#JULY
"Using a Collection Instead of a Temporary Table in Complex Reports"
http://www.quest-pipelines.com/pipelines/plsql/tips03.htm#NOVEMBER
Regards,
Zlatko Sirotic -
Using Oracle Users in Realms and DataSource.getConnection
Is it possible to authenticate using an Oracle User via JAASRealm and also retrieve connections specific to that user from a DataSource?
I currently have an application which doesn't use either, but rather sets up a OracleDataSource. So basically I just want to allow the container to administer both the authentication and data source setup, while still allowing the getConnection(user,password):
CODE
ocpds = new OracleConnectionPoolDataSource();
ocpds.setURL(connectionString);
ocpds.setConnectionProperties(props);
ods = new OracleDataSource();
ods.setURL(connectionString);
ods.setConnectionCachingEnabled(true);
ods.setConnectionProperties(props);
// Pool and Cache
Properties poolProps = new Properties();
poolProps.setProperty("AbandonedConnectionTimeout", "60");
poolProps.setProperty("InactivityTimeout", "5");
poolProps.setProperty("TimeToLiveTimeout", "60");
poolProps.setProperty("ConnectionWaitTimeout", "60");
ods.setConnectionCacheProperties(poolProps);
ods.setConnectionProperties(props);
Util.logln("Connection Cache Properties");
cache = OracleConnectionCacheManager.getConnectionCacheManagerInstance();
cache.createCache(cacheName, ods, poolProps);
cache.setConnectionPoolDataSource(cacheName, ocpds);
........later in the BatCave (JSP or a servlet).....
conn = (OracleConnection) ods.getConnection(username, password);
ENDCODE
This section from OAS Containers for J2EE Services Guide worries me:
(from: http://download-east.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#sthref572 )
Using Different User Names for Two Connections to a Single Data Source
When you retrieve a connection from a DataSource object with a user name and password, this user name and password are used on all subsequent connection retrievals within the same transaction. This is true for all data source types.
For example, suppose an application retrieves a connection from the jdbc/OracleCMTDS1 data source with the scott user name. When the application retrieves a second connection from the same data source with a different user name, such as adams, the second user name (adams) is ignored. Instead, the original user name (scott) is used.
Thanks for reading all of this, and I appreciate any help!Update:
I'm still not quite sure what to do. Where I am now:
1. I don't know how to authenticate against Oracle database users (non-ldap) via JNDI/JAAS/whatever
2. Proxy authentication (ALTER USER...CONNECT THROUGH...) seems to be promising for using connection pools, and in addition, once realm authentication happens, I can just pass the username and piggyback on the middletier connection without knowing the password used in authentication
3. I'm not sure if proxy addresses the issue that OAS Containers for J2EE Services Guide talks about in the original post
4. I'd prefer not to use OID
Again, if you have any little information, I'd really like to hear it. -
Hi All !
Is there some way to use a dll file in the oracle stored procedure?
Any Oracle supplied Package?
and can i have a site for the material regarding "Oracle Supplied PL/SQL Packages Reference"To phrase it more clearly. To implement such a logic is probably many times more complex then simply reprogramming your vb.net logic in pl/sql. Or changing your logic flow from client to server, instead of from server to client (as you want it to be).
However here are some documents to start reading.
Data cartridges: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14289/dciroadmap.htm#sthref146
Using Websphere Message Queing Gateways: http://download.oracle.com/docs/cd/B19306_01/gateways.102/b16216/intro.htm
Using Heterogenous Connectivity: http://download.oracle.com/docs/cd/B19306_01/server.102/b14232/toc.htm -
Unable to export the schema by the name OPS$BDIT using expdp
Hi,
oracle - BDMSD> expdp directory=EXPORT_BACKUP_DIR schemas=OPS$BDIT dumpfile=test.dmp logfile=test.log
Export: Release 10.2.0.4.0 - 64bit Production on Monday, 30 January, 2012 10:08:27
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39170: Schema expression 'OPS' does not correspond to any schemas.
Thanksuser12266475 wrote:
Hi,
oracle - BDMSD> expdp directory=EXPORT_BACKUP_DIR schemas=OPS$BDIT dumpfile=test.dmp logfile=test.log
Export: Release 10.2.0.4.0 - 64bit Production on Monday, 30 January, 2012 10:08:27
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: / as sysdba
Pl post OS details. You should not use "/ as SYSDBA" to execute expdp - see the first "Note" here - http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_export.htm#sthref57 - use SYSTEM instead.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39170: Schema expression 'OPS' does not correspond to any schemas.
ThanksFor special characters like $, it is best to create a parameter file and use quotes or escape characters, rather than provide the parameters on the command line.
Exporting a schema which contains a dot in the name with EXPDP fails with ORA-39001, ORA-39170 [ID 388763.1]
HTH
Srini -
Problem with interactive forms using ABAP
Hi all,
I am trying to create an interactive adobe form using ABAP in ECC 6.0. But while execute the form, it is creating an error saying that
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message:
ADS: The render error log file has been written to D:\u(200101)
But i was able to create adobe interactive form using WebDynpro and its working perfectly. But the problem is while using ABAP method.
Do anyone have an idea why its happening?
Thanks and Regards,
Raja SekharHi
Interactive Forms based on Adobe software is SAP's new solution for forms development. Its first release has the focus on interactive use of forms. High-volume printing is supported in principle, but - being a new solution - the performance has not yet reached the same level as Smart Forms or SAPscript, two established solutions that had years to grow. Interactive Forms is the only solution that will continue to be enhanced with new features, while SAPscript and Smart Forms will be supported without limitations.
When (or if) to move to Interactive Forms depends on your requirements. For interactive forms usage, i.e. the new functions, you have no choice, as the existing solutions don't support it. High-volume print scenarios need to be carefully analyzed to see whether your concrete requirements can be met at this point.
However, it is possible to move to Smart Forms and design your forms in such a way that a migration at any point in the future would be but a small step. Smart Forms offers from Web AS 6.40 a migration wizard to Interactive Forms. Technically, everything can be migrated, but we recommend against things like ABAP program nodes, for example.
You are not forced to ever go to Interactive Forms if you don't want to. It really depends on whether your client needs any of the new features in Interactive Forms. Also, if they are currently working with JetForms, they could enquire with Adobe directly what migration path they offer to the joint solution.
It is impossible to make a blanket statement on what needs to be done in each of the applications using a form for output. Despite the same underlying technology, forms handling has always been a decision for each SAP application: Some do it through customizing, some through coding, some in yet anither way.
What I CAN say from a technology pespective is that all applications are in the process of creating their forms based on Interactive Forms so that by 2007 pretty much all SAP forms will be PDF-based. Obviously, each application does it within the framework of their application - but they all use Interactive Forms.
By the way, be aware that in ERP 2004 this forms solution is subject to a limitation for high-volume printing scenarios as we cannot ensure that ALL customers will be content with the performance in ALL scenarios with this release. (see SAP Note 863893).
To get an overview idea about Adobe forms ,
Using SFP , first you need to create a interface . in interface you can declare the import and export parameters and also the declaration part, coding etc : This is nothing but similar to Function module interface.
And now we have to create the Form which is interactive. Create the form and enter the interface name which you have created in first step, so that the parameters , declarations of fields etc : will be copied and available in the form layout. So that you can drag and drop these declared fields ( dclared fields of interface ) to the layout.
Create the context and layout in the form.
The layout generated can be previewed and saved as PDF output.
Now we need to integrate the driver program and the PDF form to get the final output as per the requirement.
On activating and executing the form you will get a function module name just similar to smartforms.
The driver program needs to call this FM.
Refer to the below sample code :
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000043'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
IV_IMAGE_URL =
iv_sending_country = 'US'
IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/4a94696de6429cada345c12098b009/frameset.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
/people/thomas.jung3/blog/2005/07/13/lessons-learned-from-adobe-forms-development
/people/community.user/blog/2006/11/20/search-help-in-isr-adobe-forms
/people/franklin.herbas/blog/2005/12/13/2d-barcode-pdf-forms-with-sap-netweaver
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/82538c0c4458bbe10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/bd2d828aa04eeb9451aad0d02ae9a0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/company/press/press.epx?pressID=2785
http://www.adobe.com/enterprise/partners/sap.html
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Use the Tcode : SFP
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Very useful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/00f4f594-7306-2a10-8483-b45bec157093 [original link is broken]
for PDF forms
http://help.sap.com/saphelp_nw04/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm
See the links for debugging
Refer to this thread
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
Debugging
Check these documents.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_nw04/helpdata/en/5a/4ed93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
ABAP Debugging
http://www.saplinks.net/index.php?option=com_content&task=view&id=24&Itemid=34
Look at the SAP help link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
For online PDF form creation...........
https://createpdf.adobe.com/index.pl?BP=IE&LOC=en_US
for Other information use these Links
C:Documents and Settingsvuser01DesktopSANKET SPersonalVikalpsap netweaver ABAP and adobe Formspdf form webpdf based print forms.htm
C:Documents and Settingsvuser01DesktopSANKET SPersonalVikalpsap netweaver ABAP and adobe Formspdf form webSAP Interactive Forms by Adobe.htm
http://searchsap.techtarget.com/generic/0,295582,sid21_gci1079310,00.html?Offer=SAPwn927nw
http://www.thespot4sap.com/articles/SAP_Netweaver_Introduction.asp
http://help.sap.com/saphelp_webas630/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c7cbe08d-0c01-0010-8bac-b9ce7348246c?source=gawindev09&kw=sap+netweaver&adgroup=brand_netweaver
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
https://websmp204.sap-ag.de/~sapidp/011000358700004952682004E
/people/venkata.ramisetti/blog/2006/09/21/configuring-output-types-for-pdf-based-print-forms
http://help.sap.com/saphelp_erp2005vp/helpdata/en/96/6ee0d5b39640d68fc0078fc575114a/frameset.htm
D:adobe livecycle designerAdobe_Designer_71BeforeInstall.htm
http://sdn.sap.com/irj/sdn/interactiveforms
very imp ADS configuration guide
http://help.sap.com/saphelp_nw2004s/helpdata/en/95/5a08cd0e274a0bae559622d6670722/frameset.htm
Could anyone provide the complete manual of SAP Query Creation
Tcode is : SFP
chk these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
see these links..
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
/people/thomas.jung3/blog/2005/07/13/lessons-learned-from-adobe-forms-development
/people/community.user/blog/2006/11/20/search-help-in-isr-adobe-forms
/people/franklin.herbas/blog/2005/12/13/2d-barcode-pdf-forms-with-sap-netweaver
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/82538c0c4458bbe10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/bd2d828aa04eeb9451aad0d02ae9a0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/company/press/press.epx?pressID=2785
http://www.adobe.com/enterprise/partners/sap.html
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf
Maybe you are looking for
-
TS3430 I am having iTunes CTD issues
When I open iTunes it crashes to desktop. A previous work around was for me to make a new playlist and then delete it. That now does not work. I am able to open iTunes in safe mode and it functions normally. I followed the directions about examin
-
How to open a closed posting period?
frnds Transaction MIRO i am trying to post invoice in one of the closed period, so it not allowing me to post and gives a message that postingperiod is not opened, can you please tell me how can i open closed posting period? Thanks
-
No able to write reviews in app store from Iphone 6
Hi, I'm not able to write reviews for the app I have purchased from app store. When I open write review tab and click on title then screen goes blank and not able to see what i type and also send button is disabled when i write something. Please sugg
-
Firewire Woes With External HDD
I bought a two bay enclosure that has Firewire 400, 800 and USB 2.0 ports for connectivity. I use Firewire over USB 2.0 for obvious reasons. Now the thing is, sometimes when I plug it in, my MBP refuses to mount the drives. It takes a bit of unpluggi
-
Events not showing all photos.
I am running iPhoto '11 on OSX 10.7.4 Some events are not showing all the photos. The files are there when I look in finder at the original file. I've tried rebuilding the library but that didnt work. Any suggestions?