HTML CFGRIDCOLUMN values showing up for valuesdisplay issue

I'm using cfgrid type=html.  I am creating a dropdown box in the cfgrid, however in the dropdown box it is showing the Values, instead of the ValueDisplay in the dropdown box.
<cfgrid name = "SecondGrid"
        height="200" width="700"
        font="arial" fontsize="12"
        query = "getsecurity"
        SORT="Yes"
        selectmode="edit"
        format="html"
        insert="yes"
        delete = "#deletevalue#"
        >
<CFGRIDCOLUMN NAME="userrole" HEADER="User Role"
        HEADERALIGN="LEFT" DATAALIGN="LEFT"
        BOLD="Yes" ITALIC="No"
        SELECT="Yes" DISPLAY="Yes"
        HEADERBOLD="No" HEADERITALIC="Yes"
        VALUES = "teacher,adminassist"
        VALUESdisplay = "Teacher, Administrator"  valuesDelimiter=",">
</cfgrid>
Thanks for your help!
BCo

Coladan,
This is, most likely, a rounding problem.  The sum of the numbers is probably a VERY, VERY, VERY small, negative number.  if you use the round function this should resolve.
instead of using:
=SUM(P4:P5)
try:
=round(SUM(P4:P5), 2)
Where "2" is the number of digits to the right of the decimal

Similar Messages

  • Po quantity value showing difference for only decimal qty range

    Hi Experts,
              In purchase for  line items which contains decimal qty like 0.232 , it is taking net price also in decimal format.But for other line items it is displaying correctly(whole qty no's)..
    pricing conditions we maintained at info record level.
    attached doc for your reference.  
    Thanks & regards,
    Deepika

    have you checked is there any rounding rule for condition type which is suggested by span 1.
    One think I have noticed, your amount is showing 2.09, but my amount is showing 2.08.
    And your value is showing for J3AP condition type. J3AP is used for SAP AFS material.
    Regards
    Dev

  • Net value showing negative in excise billing for free goods items

    Dear All,
    Need value suggestions in business scenario.
    While issuing Free goods to customer in excise billing ,Net  value of ZTNN item showing negative
    Inserted R100 % condition type above Tax condtions.
    MRP is statistical and accessable value is calculated on MRP.
    How to  solve the above issue.
    Due to the Net value showing negative for Free of charge in excise billing,qty value  displaying twice the unit price value in printing
    Thanks & Regards
    H V Kumar.

    Hi
    It is depends on your pricing procedure how you defines.
    Kindly check once again in your pricing procedure.
    Test the cycle once again without entering the R100 condition type in sale order line item and check the next value.
    After enter the R100 condition type check the base value to calculate the Amount.

  • COGS Value showing as null for Projects

    Hi All,
    We have a report called Revenue Report. In this report we track the revenue and cogs value for both OM orders and Projects. We are able to see th cogs value for OM order(i.e. sales order)but not for projects. We are using OOTB out of box mapping(i.e.SDE_ORA_GLCOGS) for populating cogs value.So we have approached oracle team to address this issue. Please find the below reply from Oracle. Can somebody help me how to calculate COGS value for projects.
    BIApps 7.9.6.x do not support the integration of Project and COGS out of the box. If you have cogs trx from Projects and would like to extract these trx, you can customize the SDE sql.
    [OOTB sql in SDE_ORA_GLCOGS]
    WHERE
    MMT.TRANSACTION_TYPE_ID IN (15, 33, 10008) AND
    (MMT.TRANSACTION_ACTION_ID,MTA.ACCOUNTING_LINE_TYPE ) IN
    ((27, 2), (1, 36), (36, 35))
    MMT : MTL_MATERIAL_TRANSACTIONS
    MTA : MTL_TRANSACTION_ACCOUNTS
    15 = RMA Receipt (Return Material Authorization)
    33 = Sales order issue (Ship Confirm external Sales Order)
    10008 = COGS Recognition
    (27, 2) = (Receipt into stores, Account)
    (1, 36) = (Issue from stores, Deferred Cost of Goods Sold)
    (36, 35) = (COGS Recognition, Cost of Goods Sold)
    These are OOTB default values to extract the cogs trx for sales order etc. These are configurable. You can add/modify these values as needed. You can check the OLTP MTL module for the meaning of each values

    Please do not post duplicates -- COGS Value showing up as null Projects

  • [svn:fx-trunk] 12994: * Fixes for two issues that were showing up in FB.

    Revision: 12994
    Revision: 12994
    Author:   [email protected]
    Date:     2009-12-16 06:44:45 -0800 (Wed, 16 Dec 2009)
    Log Message:
    Fixes for two issues that were showing up in FB.
    QE notes:
    Doc notes:
    Bugs: SDK-24669, SDK-24686
    Reviewer: Corey
    Cycloner: George
    Tests run: checkintests
    Is noteworthy for integration: yes, fixes two FB issues.
    Code-level description of changes:
      modules/compiler/src/java/flex2/tools/PreLink.java
        Modified postRun() to swap in the root CompilationUnit's Logger
        when validating it's StyleContainer.  This allows the warnings
        from StylesContainer.validate() to be persisted across incremental
        compilations.  This fixes SDK-24686.
      modules/compiler/src/java/flex2/compiler/Source.java
        Made getLogger() public, so it could be called from PreLink.
      modules/compiler/src/java/flex2/compiler/CompilerAPI.java
        Modified compile() to check forcedToStop() after each PreLink
        batch.  This fixes SDK-24669.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24669
        http://bugs.adobe.com/jira/browse/SDK-24686
        http://bugs.adobe.com/jira/browse/SDK-24686
        http://bugs.adobe.com/jira/browse/SDK-24669
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/Source.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/linker/CULinkable.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

  • Value Mapping Replication for Mass Data - Performance Issues

    Hi All,
    We are looking into Value Mapping Replication for Mass Data. We have done this for less number of fields.
    Now we might have to have 15,000 records in the cache for the Value Mapping. I am not sure how this would effect the Java Cache and Java Engine as a whole.
    There might be a situation where we will have to leave the 15K records in the cache table on Java Engine...
    Are there any parameters that we can look into just to see how this hits the performance.
    Any links/ guidance in the right direction might help me..
    reg

    Naveen,
    Check jins reply in this thread (they have done with API and without API using graphical but still some issues):
    Value mapping performance using LookUp API
    ---Satish

  • I have over 300 pictures on my phone...my question to someone iphone savvy is why, when I plug my phone into the computer is iPhoto showing no pictures?  I want to delete them for space issues.  Thanks

    I have over 300 pictures on my phone...my question to someone iphone savvy is why, when I plug my phone into the computer is iPhoto showing no pictures?  I want to delete them for space issues.  Thanks

    I've seen this happen when the phone was encrypted... Other than calling apple/deleting passcodes I don't know of any solution.
    If you're keen on waiting, upload your photos to dropbox, that's the way I do it.

  • HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

    Has anyone else found solution to Apple devices not 'seeing' each other on Home Share?  I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all.  Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
    I have already tried the following without success:
    1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
    2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
    3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
    4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
    I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other:  "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

    I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

  • Why do app updates no longer show up for me in iTunes?

    Please don't stop reading, because I think my issue is different from similar ones I've found posts about.
    For the past week or so, I've been unable to update apps through iTunes. When I click "Check for Updates," it shows "Accessing iTunes Store" at the top of the screen, but after it finishes I never get a dialog box -- neither the dialog box saying there are new updates nor the one saying there are not. Also, I don't get the notification in the left hand column next to "Applications" that normally shows how many app updates are available. The latter point is what seems to distinguish my problem from the other posts I've seen, in which push notification seems to work but updating fails. I can't even see any updates in the first place -- and this occurs even when I can see from using the App Store on my iPhone that I have multiple updates available. And I have a lot of apps.
    I should add that this is especially mysterious because it is the only problem I am having with iTunes. I can still download NEW apps from the iTunes App Store, sync my iPhone, download podcasts, etc. I can also update Apps on my iPhone itself. My internet service is working fine. This problem began with the previous version of iTunes and has continued in iTunes 8.1.
    One final confession. A few weeks ago, I went through my Apps folder and deleted the non-current versions of all of my apps, hoping to save space on my old computer's hard drive. I don't think this is the cause of the problem, because app updating continued to work for a few weeks after that. But I mention it in the interest of full disclosure. But in addition to my main question, I'd be interested in knowing if this is a bad idea for future reference.
    I am running iTunes 8.1.0.51 on Windows XP Home edition (SP 3), and I have a first-generation 4GB iPhone.
    Can anyone help?
    Thanks very much!
    Matthew
    NYC area

    ell, exactly same problem here: could not have been described better. It all started when I noticed that I could no longer update iPhone apps. "Applications" folder under Library showed such updates awaiting downloading: I could not get any further.
    AND SUDDENLY, for no reason, the "Application" in iTunes "Library" disappears! No folder visible, no apps listing, no updates mentioned. Wow!
    i had contacted Apple's iTunesStoreSupport in regard to the initial incident, and was kindly informed that:
    +"Dear Roger,+
    +Thank you for contacting iTunes Store Customer Support for assistance. I understand that you are receiving intermittent connection errors using iTunes 8.1.+
    +Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.+
    +Thank you very much for your patience, and I am sorry for any delay in enjoyment of your iTunes experience. Finding a solution for you is important to me.+
    +Remember, we wish your iTunes experience to be truly enjoyable. Take care, and thank you for being a valued iTunes Store customer. Your business is most appreciated.+
    +Best regards"+
    I thus figured that in some way "all was in control"... Until the Applications forum disappeared. Apps gone??? Are they stored somewhere on my Mac??
    I have just emailed an update incident report to iTunesStoreSupport with screen prints to show abrupt, undesired change.
    - Roger T

  • 1 custom field not showing up for modification in new List Variant for KS12

    Dear SAP Experts,
    I need some help regarding list variants using custom fields.  I made a new List Variant for transaction KS12 using a few custom and standard fields.  The custom fields are in CI_CSKS structure. I did all this according to not 95080 using option two (Adjust screen 1399 in function group KMA1).  I got the header to display the name of the fields in SE51.  The strange things is that after I start KS12 with the new list variant one of the custom fields doesn't show up for modification if there is no value in it where this is not the case with the others.  That is if there is no value in it already (even on character) I can't enter new values in to it, which beats the purpose.  I checked the attributes of the the custom fields and they are all the same, unless I missed something.
    Does anyone have an idea why this could be?

    Hi Michael - I too have exactly the same problem in Lion. It seems to be a bug.
    A minor one, given all the other much larger issues I have with Lion.
    I'm living with it in the expectation that someone will fix it. I notified it ages ago - long before the recent Lion update.
    I am mainly using Snow Leopard. This problem doesn't happen in Snow.

  • ORA-12899: value too large for column

    Hi Experts,
    I am getting data from erp systems in the form of feeds,in particular one column length in feed is 3 only.
    In target table also corresponded column also length is varchar2(3)
    but when i am trying to load same into db ti showing error like:
    ORA-12899: value too large for column
    emp_name (actual: 4, maximum: 3)
    i am using data base version :
    Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
    but this is resolved when the time of increasing target column length to varchar2(5) from varchar2(3)..but i checked length of that column in feed is 3 only...
    my question is why we need to increase the target column length?
    Thanks,
    Surya

    >
    my question is why we need to increase the target column length?
    >
    That can be caused if the two systems are using different character sets. If one is using a single-byte character set like ASCII and the other uses multi-byte like UTF16.
    Three BYTES is three bytes but three CHAR is three bytes in ASCII but six bytes for UTF16.
    Do you know what character sets are being used?
    See the Database Concepts doc
    http://docs.oracle.com/cd/B28359_01/server.111/b28318/datatype.htm
    >
    Length Semantics for Character Datatypes
    Globalization support allows the use of various character sets for the character datatypes. Globalization support lets you process single-byte and multibyte character data and convert between character sets. Client sessions can use client character sets that are different from the database character set.
    Consider the size of characters when you specify the column length for character datatypes. You must consider this issue when estimating space for tables with columns that contain character data.
    The length semantics of character datatypes can be measured in bytes or characters.
    •Byte semantics treat strings as a sequence of bytes. This is the default for character datatypes.
    •Character semantics treat strings as a sequence of characters. A character is technically a codepoint of the database character set.
    For single byte character sets, columns defined in character semantics are basically the same as those defined in byte semantics. Character semantics are useful for defining varying-width multibyte strings; it reduces the complexity when defining the actual length requirements for data storage. For example, in a Unicode database (UTF8), you must define a VARCHAR2 column that can store up to five Chinese characters together with five English characters. In byte semantics, this would require (5*3 bytes) + (1*5 bytes) = 20 bytes; in character semantics, the column would require 10 characters.
    VARCHAR2(20 BYTE) and SUBSTRB(<string>, 1, 20) use byte semantics. VARCHAR2(10 CHAR) and SUBSTR(<string>, 1, 10) use character semantics.
    The parameter NLS_LENGTH_SEMANTICS decides whether a new column of character datatype uses byte or character semantics. The default length semantic is byte. If all character datatype columns in a database use byte semantics (or all use character semantics) then users do not have to worry about which columns use which semantics. The BYTE and CHAR qualifiers shown earlier should be avoided when possible, because they lead to mixed-semantics databases. Instead, the NLS_LENGTH_SEMANTICS initialization parameter should be set appropriately in the server parameter file (SPFILE) or initialization parameter file, and columns should use the default semantics.

  • 'ORA-01401 inserted value too large for column' - 9i

    I am migrating a java application from 8i to 9i. The application is writing data to a oracle 8i database without any problem.
    When the underlying database source is switched to oracle 9i database(same databaseschema as 8i) by pointing to 9i instance , the application is
    encountering the error: 'ORA-01401 inserted value too large for column' when trying to insert a particular field. The fileld is declared as varchar2(400) in the both the database.
    The debug output from application also shows that the column data being inserted as 10 characters.The insert statement from SQLPLUS works fine. So it's looks like an issue with the JDBC driver for the 9i server. I am wondering if anyone has observed such strange behavior.
    Thanks
    Vijay

    Vijay,
    Are you using OCI driver ? There is a known issue with OCI driver when using setFixedCHAR before an INSERT statement. This problem only happens with a string of length zero. There is no known issue with THIN Driver. This is fixed in Oracle9i Release 2.
    regards
    Debu Panda
    Oracle

  • Bash script aid - 'value too great for base' error

    The error is:
    /home/scripts/others/polysleep: line 15: 60 - ((((((08: value too great for base (error
    token is "08")
    Here's the script (it's an alarm for naps of different lengths) :
    #!/bin/bash
    if [ $UID != "0" ]; then
    echo "You must run this script as root." 1>&2
    exit
    fi
    TIME_SET=`date +%M`
    DELAY=60
    while [ "1" -lt "2" ]
    do
    DATE=`date +%k:%M:%S`
    MINUTE=`date +%M`
    // The offending line:
    REMAINING=$(($DELAY - (((((($MINUTE + 60)) - $TIME_SET)) % 60))))
    // I want it to show how long is left before the time is up (ie. it subtracts the time that has
    // passed from the $DELAY that was set). Since it's in minutes, I need to do the arithmetic
    // in modulo 60 (the '% 60' bit) - I tried this initially without the '+ 60' above, but got the
    // same error as I've posted, and thought that initially plus-ing 60 to $MINUTE (the
    // minute section of 'date' at the current time) would solve it. Apparently that hasn't
    // worked though =o(
    clear
    echo "1. I'm awake"
    echo "2. I'm going for a nap"
    echo "3. I'm going out"
    echo
    echo Current Time: $DATE
    echo Time Remaining: $REMAINING minutes
    read -t 1 -e input
    if [ "$REMAINING" = "0" ]
    then
    play -v .15 /home/.sounds/alarm.mp3&
    wait
    DELAY=1
    TIME_SET=`date +%M`
    input=""
    fi
    if [ "$input" = "1" ]
    then
    DELAY=60
    TIME_SET=`date +%M`
    input=""
    elif [ "$input" = "2" ]
    then
    DELAY=35
    TIME_SET=`date +%M`
    die centericq
    input=""
    elif [ "$input" = "3" ]
    then
    DELAY=999999
    TIME_SET=`date +%M`
    input=""
    fi
    done
    I'd be grateful for advice, since apart from that error popping up after some time has passed, the script runs flawlessly.

    Komodo wrote:
    This is from http://www.codecoffee.com/tipsforlinux/ … 2/044.html , and explains it better than I could:
    "bash allows you to perform arithmetic expressions. As you have already seen, arithmetic is performed using the expr command. However, this, like the true command, is considered to be slow. The reason is that in order to run true and expr, the shell has to start them up. A better way is to use a built in shell feature which is quicker. So an alternative to true, as we have also seen, is the ":" command. An alternative to using expr, is to enclose the arithmetic operation inside $((...)). This is different from $(...)."
    Yeah, I knew that already. But what I meant were the extra paranthesis you're using. This is the calculation the way you do it:
    REMAINING=$(($DELAY - (((((($MINUTE + 60)) - $TIME_SET)) % 60))))
    But this is totally adequate:
    REMAINING=$(( $DELAY - (( $MINUTE + 60 ) - $TIME_SET ) % 60 ))
    Notice the 6 vs. 2 brackets in front of $MINUTE?

  • Swaps values showing in RED -TCODE ST02

    Hi All,
    When I checked the ST02 transaction  value of "SWAPS" for program buffer,CUA buffer,screen buffer, Tables generic key buffer and export/import buffer are showing in "RED" colour.
                              (%)           (kb)             %                
    Buffer               Hitratio      Allocated     Free Space    swaps
    Program           99.88         900000        0.36             19541
    CUA                99.9           10,000         1.27             37960
    export/import    94.33         40,000         29.10          750,676
    Swaps value are showing in RED mark....Is there somthing fishy? What can be done to overcome this issue?
    Thanks in advance
    Regards,
    Prashant.

    Dear Prashant,
    SWAP is the amount of page space available at OS level. In case of windows it should not be more than 4 times the ram and in case of UNIX 3 times the ram. If swap or paging is configured high is the paging rate and low is the performance. If there is no more free directory entries are available in the buffer for new objects, old objects are removed and the space is occupied by new objects thus a swapping takes place i.e some buffer content is removed from the buffer and replaced by new buffer contents. High swap is normally a symptom of memory bottleneck.
    Red indicates swaps are to be avoided and indicate that there might be a bottleneck.
    What can be done to overcome this issue?
    You need to increase the parameter then.
    Double-click on the red value, click on "current parameters" and increase that parameter in the instance profile using RZ10. If the parameters are not yet in the profile, add them.
    After changing the instance profile you need to restart the instance.
    Regards,
    Ashutosh

  • (gdb)procfs: target_wait (wait_for_stop) : Value too large for defined ...

    When trying to debug a cpp program using dbx within the solaris9 I get the following error.
    How Can I fix this error? Please give me a help.
    Thanks.
    [UC]gdb nreUC100
    GNU gdb 6.0
    Copyright 2003 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "sparc-sun-solaris2.9"...
    (gdb) l
    130 * 1 -
    131 * 99 -
    132 * DB Table : N/A
    133 ******************************************************************************/
    134 int
    135 main(int argc, char* argv[])
    136 {
    137 struct sigaction stSig;
    138
    139 stSig.sa_handler = sigHandler;
    (gdb)
    140 stSig.sa_flags = 0;
    141 (void) sigemptyset(&stSig.sa_mask);
    142
    143 sigaction(SIGSEGV, &stSig, 0);
    144
    145 if ((argc < 5) ||
    146 (strlen(argv[1]) != NRATER_PKG_ID_LEN) ||
    147 (strlen(argv[2]) != NRATER_SVC_ID_LEN) ||
    148 (strlen(argv[3]) != NRATER_PROC_ID_LEN) ||
    149 (isNumber(argv[4])))
    (gdb)
    150 {
    151 Usage(argv[0]);
    152
    153 return NRATER_EXCEPT;
    154 }
    155
    156 ST_PFNM_ARG stArg;
    157 memset(&stArg, 0x00, sizeof(stArg));
    158
    159 memcpy(stArg.strPkgID_, argv[1], NRATER_PKG_ID_LEN);
    (gdb) b 157
    Breakpoint 1 at 0x1a668: file nreUC100.cpp, line 157.
    (gdb) r 02 000001 000001 1
    Starting program: /UC/nreUC100 02 000001 000001 1
    couldn't set locale correctly
    procfs: target_wait (wait_for_stop) line 3931, /proc/19793: Value too large for defined data type.
    (gdb)

    Sorry, there are not too many gdb experts that monitor
    this forum. Assuming you are on Solaris, you can
    use the truss command to see what gdb is doing.
    First start gdb
    % gdb
    (gdb)
    Then in another window, attach truss to it.
    % pgrep gdb
    12345
    % truss -p 12345
    The go back to gdb and run the program.
    IS the line number in the gdb error a line number
    in the gdb source code? Or is gdb complaining
    about a location in your application source code?
    If it's in your app, then looking at that line might
    help you figure out what 's going on.
    Otherwise, you can always download the gdb source
    and grep for that error message and see what
    makes it happen.
    I found this similar problem when a user can't
    debug a setuid program.
    http://sources.redhat.com/ml/gdb-prs/2004-q1/msg00129.html
    Here is another similar warning that I found with google.
    http://www.omniorb-support.com/pipermail/omniorb-list/2005-May/026757.html
    Perhaps you are debugging a 32-bit program with a 64-bit gdb or vice versa?

Maybe you are looking for

  • Service Ticket "Priority" Field...

    I have a question about changing the Priorities in the Service Ticket Header Overview. The only place I have found so far that changes these is under: SPRO > CRM > Transactions > Settings For Activities > Maintain Categories, Goals, and Priorities >

  • How Do I Save the Background Color with my File

    I am operating on a Mac Air Book with the new Adobe Creative Cloud. I am new to Illustartor, so do not know how to use it well. I saved my document as a pdf, however, in the preview, it does not have the background color, but is jjust plain white. Ho

  • Query Time Out and Shared Objects

    Hi, I have 2 questions. 1) from st22 i can get the list of users and time out information. But how can I find related query which has been time out by that user ?? as of now i was getting query information from st22 by getting abap program name which

  • Getting windows error during running the sql scripts from form 6i

    I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on form’s screen after pressing the form’s button but I am getting win

  • SAP HR to SAP FICO (Interface)

    Require your advise.. In our company we are using for both payroll and accounting SAP. Once we are through with payroll we are posting the accounting entries through Interface, however if we see in FICO for few GL accounts payroll amount and GL balan