HTML code gets displayed
I'm running the Weblog service with OS 10.4.6. When creating an entry on a weblog most of the HTML code gets translated correctly; image links, html links, etc. But on certain HTML tags the code gets displayed and it's not translated. For Example if add a horizontal ruler the html tag is displayed.
When I use the tag <hr /> the horizontal ruler does not get display only the tag gets displayed on the weblog.
Is there a way to allow certain HTML tags to be translated?
X-Serve Mac OS X (10.4.6)
Hi,
I will now attempt to shed as much light on this topic as possible...
There are two main buffers where stuff gets stored before going to the ResponseOutput; the JspWriter out, and the pageContext.include(). (perhaps you are using this method in your tag). The include method sends it's stuff to the ResponseOutput immediately, where as the JspWriter does not... i don't think? The problem is that the include method is supposed to flush the JspWriter before processing the include and i found that it didn't do a very good job...
"The current JspWriter "out" for this JSP is flushed as a side-effect of this call, prior to processing the include. "
The solution is to manually flush the JspWriter before...
JspWriter.flush();
hope this helps!
Randy
Similar Messages
-
MVC before page loads html content getting displayed
I have built the application using MVC and when i am trying to re-direct from one view to other view i am building the contents in string builder putting into the view but before the page load i am getting this kind of html content
later after few seconds i get the full view of the pagePlease use the ASP.NET forums for MVC related questions:
http://forums.asp.net/1146.aspx/1?MVC -
Help with html code for displaying flash animation
hi all,
i'm new to the forums :)
not sure if this is the correct section or not.
i run a small web based community for xboxlive players and i
am trying to add an interactive flash file into a block on the main
portal page
What
the file should do- link to sample file
link to swf
file- link to actual flash file
homepage - link to portal
homepage where the flash file needs to be, if you scroll all the
way down the bottom of the page you will se it sort of works but im
stumped as to how to get the full animation to show properly ?
any help would be most appreciated.
cheershard to say just what the issue is here, since the file
operates normally in other embeds - I guessing that it has
something to do with your BB settings somewhere. -
How to use h:message to display HTML code in message from property file
I am using <h:message for="somecomponentid"/> to display the error message for a validator attached to a component and the error message which resides in message property file contains HTML elements like <br> and
The HTML doesnt get displayed properly and the code <br> etc is displayed instead.
Is there a method to get h:message to display HTML elements correcly.
[I know there is an h:outputFormat which has an escape parameter to allow HTML to be rendered correcly but it has no for parameter to specify the component id whose validation error message I want to display]
eg.
<h:message for="somecomponentid"/>
to display from errormessages.properties
com.somecompany.thevalidationerrormessage=You have an error<br> Please click here to return to homepageHello Ivan,
Fortunately I have just recently found a solution to my problem by using code by a developer who had already had this problem in the past and who provided a patch on the Apache MyFaces jira site.
See following link for the solution I downloaded and then used :
http://issues.apache.org/jira/browse/MYFACES-155
I believe they are intending to eventually release this in a future release of MyFaces extensions on this site.
I used the escape attribute on the tag to allow 'escaped' html code in error messages to be used.
Hope it solves your problem too..
Suhel -
How to create a pie diagram and display it in html code
hii frds,
happy 2 meet u all.
I want to know how to create a pie diagram that should not be devleloped by using applet, and use it in the html code to display a pie diagram in browser.
ex code:
package temp;
import java.awt.*;
import java.awt.image.BufferedImage;
import java.io.*;
import javax.imageio.ImageIO;
import javax.swing.JFrame;
public class Dummy1 extends Panel {
BufferedImage image;
int a1,a2,l,t,w,h;
public Dummy1()
try
a1=90;
a2=210;
l=10;
t=10;
w=200;
h=200;
} catch (Exception ie) { System.out.println("Error:"+ie.getMessage()); }
public void paint(Graphics g) {
// g.drawImage( image, 0, 0, null);
g.setColor(Color.green);
g.fillArc(l,t,w,h,0,a1);
g.setColor(Color.red);
g.fillArc(l,t,w,h,a1,(a2-a1));
g.setColor(Color.blue);
g.fillArc(l,t,w,h,a2,(360-a2));
System.out.println("in paint");
image=(Image)g.getGraphics();
public JFrame getMyFrame()
JFrame frame=null;
try
frame = new JFrame("Display image");
Panel panel = new Dummy1();
frame.getContentPane().add(panel);
frame.setSize(500, 500);
// frame.setVisible(true);
// frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}catch(Exception e) { e.printStackTrace(); }
return frame;
static public void main(String args[]) throws
Exception {
JFrame frame = new JFrame("Display image");
Panel panel = new Dummy1();
frame.getContentPane().add(panel);
frame.setSize(500, 500);
frame.setVisible(true);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
- > with out using <applet> in html can't we display the awt grahics in browser.
plz clarify my doubts.
thank you.
regards
moons..If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
[ { @parameter data_type }
[ VARYING ] [ = default ] [ OUTPUT ]
] [ ,...n ]
[ WITH
{ RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM -
HTML code for region position 3
Hi All,
Can i get the HTML code for display point: Region position 3.
My requirement is, i have to apply some background color to all the regions which are placed in region position 3.Chandran wrote:
Hi All,
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should normally include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
For layout and visual formatting issues the APEX version, browser, theme, page and region template, and region/item details are always required.
Can i get the HTML code for display point: Region position 3.
My requirement is, i have to apply some background color to all the regions which are placed in region position 3.Region position 3 is determined by the location of the substitution string<tt>#REGION_POSITION_03#</tt> substitution string in the page template. This will vary by version, theme and page template, which is information you have not provided.
Regions located in region position 3 will probably have existing background colours determined by their region templates. Is the requirement to apply a background colour to individual regions, or a background colour underlying all of the regions? -
I had never seen this before, but it has now happened to me twice today. I received HTML e-mails from two different senders, and the last part of the text (HTML code) was displayed ABOVE the beginning (and some of the graphics). After a period of time (hours for one of them), it displayed correctly (why it suddenly displayed correctly at that point is beyond me--I can't figure out if there's a trigger for it). This is a Gmail account, if that matters, and it's an iPhone 3G with 3.1 installed. Any ideas?
Message was edited by: flippermanrembsen wrote:
- Sender has got Outlook (at least 2003)
- Mail service is Exchange (at least 2003)
Looks like there is a common theme there. It is probably just that the original message has been corrupted somehow. Some mail clients try harder to understand corrupted data than others. I can't really tell from your original post. With mail messages, you really need to have the original data, not copied and pasted and not forwarded. If you have such a mail message, save it as raw source, put it into a zip file, and e-mail it to me. I can tell if it is an Apple Mail problem or a MS problem. If it is an Apple problem, I can file a detailed bug report on it. You can find an e-mail address for me by Googling my nickname. -
The html select box option is not getting displayed properly in IE11
The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some errorHi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke -
HTML code displays on one line in browser view source
Hi,
In Dreamweaver, my HTML code displays returns, spaces, etc. However, in the view source option in a browser (Firefox in particular), all the code is displayed on one single line. I only found about this because I was having problems with my Google Ads not displaying. (A Google customer service person helped me to find a workaround for this since I still haven't figured how to get my code to display correctly.) So I have gone to Preferences in DW and changed my Code Format Line Break type. The result is the same with each of the three options: the code is all on one line when you check it under view source in a browser. (The server is Linux.)
Does anyone know how to fix this? Also, I think I know how this happened in the first place. I copied my code to TextEdit for a quick backup the other day, and then I pasted it back to DW. Bad idea? Is the only way to get the code back to normal to re-write it in a new HTML file in DW?Pssh. Problem solved, but I'm not quite sure how. I did go back and try to clean up some redundant CSS and other things, but the HTML/CSS validator still shows that I have this one invalid <header> tag (www.nextmontenegro.com), but since that was written as part of the DW template, I just left it. Weird. Anyway, the code flows down the page now.
Thanks for the quick replies and helpful hints:-) -
While in edit mode in the Moodle course management system, the Page Content window should display the page as it will appear to the user. If you click on the "Edit" button, you are able to view the HTML code for the page. However, when you return to the normal display mode, the page is blank. This has occurred after the upgrade to Firefox 11.0. Page is normally rendered in Internet Explorer.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites -
Right its like this....
I can now get my data from my database (no small victory in itself. Thanx to all those that gave assistance). One of the fields contains HTML code
<p>blah blah etcWhen the jsp displays the output it is actually showing the HTML code, not the rendered output... viewing source shows that it has been written to the response as
& lt;p & gt;blah blah blah.....(needed the spaces to show it correctly!)
Any clues as to why and what I can do to about it?
Thanks
Elijado a replaceAll.., if you are using Java 1.4
String str = orig.replaceAll("& lt;", "<").replaceAll("& gt;", ">");
You might need escapes for some of those chars for the regex parser. Or this older code I had laying around:
* Decodes any entities in the specified string with their character
* equivalents.
* @param str the encoded string
* @return the decoded string
private String decodeEntities(String str) {
if(str == null) {
return null;
StringBuffer sb = new StringBuffer(str);
String[] ents = { // list of entities to replace
"&", "<", ">", "'", """
String[] chars = { // list of characters to replace with
"&", "<", ">", "\'", "\""
int len = Math.min(chars.length, ents.length);
int k = 0;
for(int i = 0; i < len; i++) {
for(int j = 0; j < sb.length(); j++) {
k = j + ents.length();
if(k >= sb.length()) {
break;
if(sb.substring(j, k).equals(ents[i])) {
sb.replace(j, k, chars[i]);
return sb.toString(); -
Displaying HTML code/document within a SIEBEL applet
Dear All,
I have a new requirement which is to integrate an external html document/code within a Siebel's applet in my Home Screen/View. This HTML code is DYNAMIC and it will change depending the user connected. It will give general informations.
I tried to use a new calculated field in the relevant BC then I added it as control (HTML Type = Field - HTML Display Mode = DontEncodeData - Runtime = Y - Visible = Y) within the applet.
Unfortunately the field property 'Calculated Value' is restricted to 255 caracters. Everything is fine when the HTML code length is less than 255. When it is greater because teh HTML code is more complex, I can not add a calculated field and the associate control due to the limitation (255 caracters).
Any idea would be greatly appreciate.
Thanks a lot.One way to get around this limit is to do the following. Split the information you need into several calculated fields and then add them together in one.
Calculated Display Field = [Information Block 1] + [Information Block 2] + .....
Where [Information Block n] is a calculated field too.
Depending on the amount of data and where you need to display the field i.e. form/list applet
you could use InvokeServiceMethod in a calculated field. Have a look here:
http://download.oracle.com/docs/cd/B40099_02/books/ToolsDevRef/ToolsDevRef_Operators8.html
Axel -
HTML code displayed in browser
when viewing the jsp pages from remote network, we are having a problem. The page ends abruptly and the html tags like <td width="30" > are displayed on the browser. the content of the page also ends at the point of html code display. the server console shows no error. Not sure if it is some network or server issue. Please help.
posting & quot(no space between & and quot) its getting replaced by " so everywhere there is a space between & and <quot/lt/gt/amp) strip that while using.
HTML reserved characters are & quot; & amp; & lt; & gt; for ", &, <, > respectively.
while writing such characters, do not directly put < , > &, " use the chars shown above.
for help here is the utility method that will put the desired chars:
public static String escapeHTML(String value)
if (value == null) return "";
StringBuffer strval = new StringBuffer();
for (int i = 0; i < value.length(); i++)
char ch = value.charAt(i);
switch (ch)
case '"': strval.append("& quot;"); break;
case '&': strval.append("& amp;"); break;
case '<': strval.append("& lt;"); break;
case '>': strval.append("& gt;"); break;
default:
if (ch > 126)
strval.append("&#" + String.valueOf(ch) + ";");
else
strval.append(ch);
break;
return strval.toString();
} -
Displaying html code in JSP page
Hi.
How do I display HTML code in an jsp page, so that the actual code is printet on the screen
fx:
<html>
<head>
</head>
<body>
</body>
</html>I can't get my reply to show properly, but the answer is;
Change < into < ; and > into > ;
but with the semi-colons stuck next to the < and > if you get my drift -
HTML Code Display - Disappearing???
(RH8, CHMs)
Hello,
Running into an issue, not sure how to fix this.
I am building a link to an external .htm file that will be included with our help CHMs. It's staying external because this allows us to update it at any time without having to update any CHM itself by re-importing and building. The html files are in the same folder as the help CHMs.
Normal hyperlinking doesn't seem to work - the CHM can't apparently see the content of topic, and may be running into an issue because it appears to be trying to open within the help screen rather than through a browser like IE or Firefox.
So I did some googling and found the following html code which works like a charm:
http://www.cybertext.com.au/tips_HTML_chm_external.htm
<OBJECT id=hhctrl
type="application/x-oleobject"
classid="clsid:adb880a6-d8ff-11cf-9377-00aa003b7a11"
codebase="hhctrl.ocx#Version=4,73,8412,0"
width=100
height=100>
<PARAM name="Command" value="ShortCut">
<PARAM name="Font" value="Arial, 10pt">
<PARAM name="Text" value="Text:Doc name">
<PARAM name="Item1" value=",document.ext,">
</OBJECT>
The issue I'm running into is that this code doesn't display in RoboHelp itself. That is, if I view the topic in Design mode, the hyperlink text ("Doc name" in the example above) never shows. And if I go between design and html, or close and reopen, the code disappears in the HTML view as well. The code is still there - the links show up as designed (and work) whenever I compile the project. I just can't find a way of getting them to display in RH beyond staying in the HTML view for that topic after inserting the code.
Any ideas why this is happening, and what can be done?You could try an iFrame. Much easier in RoboHelp 9 I believe but also available in RoboHelp 8.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
My iPhone said needed to upgrade iTunes and had no service.. Upgraded and still has no service
My iPhone will not work after being upgraded thru iTunes. Will not work at all
-
How do i change the apple id in icloud without deleting the old one?
i was given a second hand iphone 4 still logged into the previous owners apple id account. I changed the apple id connected to the itunes and app store to mine but i cant seem to be able to change the one connected to the icloud without deleting the
-
Creating active directory users with dscl
Our mac workstations (OSX 10.8) are bound to a 2008 Active Directory server. We are attempting to use some existing dscl scripts on the mac client computer to create Active directory users. We can successfully read and change AD attributes of an ex
-
Pinch zoom-in/out only works once in Safai
Outside of Safari, the pinch gesture works normally. In Preview it will zoom in or out as deep as I need. But when I try and use the gesture in Safari, it will only work once until I 'CMD' + '0' or click "Actual Size" in the View tab. It doesn't zoom
-
Iphoto is deleting photos off my camera card and phone etc. after I am downloading them onto my mac. After the photos are downloaded it asks if I want to keep them or delete them and even though Im saying that I want to keep them!. Any ideas?