HTML error message

I'm creating a simple web server. It works fine. When I open Firefox and connect and try to upload a file that doesn't exist, the program crashes. How do I get it direct to an HTML error page and continue running instead of crashing?

How are you even writing this program? Have you ever written a program before? What is the purpose of this server -- why not just set up an existing server?
You're asking very broad question. It's not like I can show you a single line of code that handles it all for you.
In any event, read the exceptions you got. They provide helpful information. If you don't understand the message, then post it here (cut and paste it completely -- don't paraphrase it) and ask about the part that confuses you.

Similar Messages

Edge Animate could not find .html error message

I have a series of animate files that I have created. When I try to open the files to make edits, this error message appears:
All of the files are in the same folder, and I have not changed any file names or coding outside of animate. I can open the .html file and edit that, but when I go to save or publish, I get this message:
I've seen the first message on a couple of discussion threads, but it didn't really seem to resolve the initial problem. I'd love it if someone had a fix for this.

Hey guys,
Sorry for the trouble you're running into -- maybe check these few things.
Are you trying to open a published file? Only the original .html file can be opened with Animate; the published files aren't runtrippable.
Has the .an or associated .html file been renamed? Have any of the dependant folders or files been renamed? The naming used when saving needs to remain in tact. In the future we're looking to loosen this restriction, but if you rename the .html or .an Animate will barf when you try and open.
Is the file saved in a locked folder? Permission issues can arise if you have restrictions placed within the OS. If you're not sure where to look for this, Here's an article on how to change permissions on Windows. Be sure to check the directory you're saving to and publishing to. A quick test might be to copy the entire AN project/files onto a conventionally unlocked folder like the desktop and try running from there.
For the users in this thread: Can you describe your operating system, and where your files are being saved and where Animate is installed? For example C:\Windows\Blah\Programs
Thanks,
Sarah

Robohelp HTML error message

Everytime i try to generate webhelp I get an error message that shuts down Robohelp. I just recently changed computers and had to have Robohelp 6 re-installed. I have 3 projects, but this only happens with one particular project. I don't know what it could possibly be, since the other projects open and generate webhelp fine. I deleted the .cpd file for the project, and tried, but i'm still getting the error message. Any ideas why this could be and what i can do to correct it?

See Snippets 68 and 71 on my site.
See www.grainge.org for RoboHelp and Authoring tips

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

Error message 4400 controller

I get in our logs "Received LWAPP packet with invalid sequence number". Does some one know what this means?

you can find it from:
http://www.cisco.com/en/US/docs/wireless/controller/message/guide/msgs6.html
Error Message %LWAPP-3-RX_ERR3: Received LWAPP packet with invalid sequence number
(got [dec]expected [dec]) - from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]
Explanation LWAPP packet sequence mismatch has occurred, LWAPP packet was dropped. AP may not function as expected.
Recommended Action No action is required.

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

I am getting this error message when trying to get to a college webpage Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.

I am trying to get to a college webpage for information and get this error message from firefox Firefox doesn't know how to open this address, because the protocol (html) isn't associated with any program.
== This happened ==
Every time Firefox opened
== whe trying to access webpage

Is this coming from a link, or from something you are trying to type in the address bar?
Try replacing the "html" at the start with "http",
so if you have html://somesite.edu,
change it to http://somesite.edu.

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

Hi, all,
Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
Any advice you could give would be welcome.

Hi there
Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Opening a .html in workbench gives 'Null' error message

Hi,
I am using MII 12.1.9 Build(108). When I double on a .html object, it gives a 'Null' error message and doesn't open the file. Then if I am right click on that file and click on 'Open' it opens up. Is there something wrong?
Regards,
Chanti.

Hi
Have tried the same and its working as expected.
All you need is, to make a new file and save it with .html/.htm extension rather than importing as .html file directly from local source.
Hope this will Work now.
Regards
SS

Cannot publish 1 page in CS4. Other pages including index.html ok. Error message results.

After many months of no difficulty, I suddenly cannot publish changes to one of my pages (all others work) without getting the error message 'Another instance of Contribute is doing a workflow operation. Do you want to break the workflow and continue.....?' Whether I say yes or no and follow the prompts, it doesn't work. One way lets me exit, the other locks up my computer and I have to 'end task' to get control back. I hoped that the answer to the 'cannot publish index page' thread would help, but I didn't understand because most of this stuff is over my head. The only thing unusual I can dectect is the page name has an # sign after html as in 'name.html#tuition.' The word tuition refers to a pointer on the page. When I switch to edit mode, an asteric * appears after 'html' on the page name. I do not see that on any other page when I edit. I have CS4 version 5. Can anyone help? I don't know how many people there are in India, but I talked to half of them in a 2.5 hour 'session' in which I was transferred in a least 3 complete loops to every department and passing 'go' 3 times before some techie finally said I should email my question in and will get a reply within 3 days. Yeah, right. Worst tech support experience I have had in 10 years.

Hi,
Can you try deleting the Preferences and the Contribute's User Configuration folder. You will lose your website connections, you can recreate them again after relaunching Contribute.
If you have installed Contribute in Mac, go to <Username>/Library/Application Support/Adobe folder and delete Contribute CS4 folder there. Also, go to <Username>/Library/Preferences/ folder and delete the 'Adobe Contribute 5 Preferences' file.
If you have installed Contribute in Windows XP, the Contribute's Configuration folder will be in C:\Documents and Settings\<your username>\Local Settings\Application Data\Adobe\. Delete the Contribute CS4 folder there. To clear the registry for Contribute, type 'regedit' in the Run window.(Click Start, and click Run, and then type 'regedit' in the text field.) Select HKEY_CURRENT_USER, then Software, then Adobe, then Contribute CS4. Click Delete button. Close the Registry Editor window.
The <username>, I have mentioned above is the name with which you will have logged into the machine.
Now, Relaunch Contribute and connect to your website and try editing the web pages from your website. Can you try this?

Error Message: oracle/jbo/html/databeans/Res

I have copied required JAR and ZIP files into the /lib directory of Java Web Server. Classpath is also pointed to that. I am getting the first screen of JSP with menu on left side but I am getting "Error Message: oracle/jbo/html/databeans/Res" if I am trying to run any JSP having NavigationBar WebBean..Any Ideas. Otherwise
null

This is a new library with Jdev 9.0.3,
bc4j_jclient_common.jar.
iAS 9.0.2 doesn't include this file.

Don't understand error message from HTML parser?

I've written a simple test program to parse a simple html file.
Everything works fine accept for the <img src="test.gif"> tag.
It understands the img tag and the handleSimpleTag gets called.
I can even pick out the src attribute. But I get a very strange error message.
When I run the test program below on the test.html file (also below) I get the following output:
handleError(134) = req.att srcimg?
What does "req.att srcimg?" mean?!?!?
/John
This is my test program:
import javax.swing.text.html.*;
import javax.swing.text.*;
import javax.swing.text.html.parser.*;
import java.io.*;
public class htmltest extends HTMLEditorKit.ParserCallback
public htmltest()
 super();
public void handleError(String errorMsg, int pos)
 System.err.println("handleError("+pos+") = " + errorMsg);
static public void main (String[] argv) throws Exception
 Reader reader = new FileReader("test.html");
 new ParserDelegator().parse(reader, new htmltest(), false);
This is the "test.html" file
<html>
<head>
</head>
<body>
This is a plain text. 
This is bold and this is itallic! 
<img src="test.gif">
"This >is also a plain test text." 
</body>
</html>
----------------------------------------------------------------------

The handleError() method is not well documented any more than whole javax.swing.text.html package and its design structure. You can ignore the behavior of the method if other result of the parser and your HTML file are proper.

Error Message= x Cannot find the HTML help browser installed on your system.

Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!

Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

APEX 3.1 replaces HTML tags in error message automatically

Hello!
I have a problem: we use sometimes HTML links or even JavaScript in error messages. In older versions of APEX it works, but now we upgraded to 3.1 and in all those messages HTML tags are replaced so instead of link we get a plain HTML in a message.
Are there any possibilities to turn this option off or what can we do to solve this problem?
Regards,
Maksim

In a page process we use raise_application_error(-20547, 'Go to GOOGLE') and in a Process Error Message
we use constuction Error: #SQLERRM#. Then on an standard error page we see instead of Error: Go to Google html source. Thats it. In template in Error Page Template Control section we use substitution #MESSAGE#

HTML error message

Similar Messages

Maybe you are looking for