Html or other data source for report

The Federal FCRA notice must be included in certain reports. In order to keep it user maintainable, I wanted to save it in the database in some fashion. One way I'm trying is using HTML to generate a PDF output that will be merged with the other reports or possibly be included in the main reports.
I have a simple Oracle 11g Report selecting html from a database column of clob datatype.
The html is produced in the report as text, tags & all. It does interpret the bold tag, but nothing else.
I do have the Contains HTML tags property set Yes.

Is the ability to include a MS Word document inside an Oracle Report no longer available? I am in 11g Reports and 10g database.
I've successfully loaded the Word doc to a blob column and the report runs and presents other data elements from the table. However, the OLE2 field for the Word doc is blank. Suggestions?

Similar Messages

Data source for report

Hi guys.
Can somebody let me know how to set data source for report?
I did import "import.zip" and "bootstrp.zip".
I did run "HFPBMMAK.PRO".
I did create model connection of "HFPBM"
Best Regards,
Chul.

Chul,
You only have to import either import.zip OR the bootstrap.zip, not both.
I don't know if you have SSM 7.5 or SSM 10, this will be for 7.5
If you have followed the set-up correctly, you should be able to open the demolauncher -
http://localhost:50000/strategy/pilotworks/demolauncher.htm
Where localhost = server 50000 = port
You should open the Administrator interface of your demo and Set Scorecard Defaults. For a context make sure that the PAS Model Connection is set for the model connection you set - HFPBM.
You also need to make sure that Manage Application Groups have your user added for the context you selected.
(For 10 the application groups are managed in NetWeaver)
Regards,
Bob

Data source for reports

hi all,
we r using 10g application server along with the reports service to deploy J2EE application
The data source for the application is specified using the JNDI lookup
Is it possible to use the same strategy for reports as well.
i.e., we are using jdbcpds. so is it ok if i give the JNDI look up name as P_JDBCPDS
If not is there any other way to make the P_JDBCPDS connection generic, so that i can change the username and database name without having to change the cgicmd.dat file
Any help is greatly appreciated.
Thanks & regards,
Ramakrishna

If it is intended to be accessible from Reports servlet then you can use "ssoconn" command line option where by the user name and password is stored in OID (Oracle Internet Directory)
Pls see publishing reports to web document --> command line options -> rwservlet
(link below)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Need functional consultant help in having data source for report

Hi Experts,
My Client needs to have report with following fields:
Sales order, date of sales order created , Purchase order number/Work Order number/Contract Number ,date of Purchase order number/Work Order number/Contract Number, curve out, product/material description, created by, created on, invoice/bill number,invoice/bill date,invoice value,currency,exchange rate to USD for the date of invoicing,bill type,bill description,date of posting invoice,reference document number,company code,customer name,customer account number.
As we dont had functinal consulatnt it is very hectic for me to get table name and feilds
sales order u2013,
date of sales order created -,
Purchase order number/Work Order number/Contract Number-? ,
date of Purchase order number/Work Order number/Contract Number-?,
curve out-?
product description-?
created by -?
created on-?
currency-?,
exchange rate to USD for the date of invoicing,-?
bill type-?,
bill description-?,
date of posting invoice-?
reference document number-?,
company code-?,
Customer name-?,
Customer account number-?.
Please let me know if any standard data source is there for above fields.
Anything is appreciable. I am waiting for your valuable reply.
Thanks Regards,
narasimha.

Hello,
Check these DS and tables list for SD. You will get all the required info
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
Also check the below link;
http://help.sap.com/saphelp_nw70/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
Lo Datasources for SD
Thanks,
VA
Edited by: Vishwa Anand on Sep 20, 2010 4:26 PM

Data source for reporting

Dear Gurus,
The requirement is to develop the following reports
1. Expenditure Actual vs. Budget (OPEX)
2. Expenditure Actual vs. Budget (CAPEX)
3. Sales Forecast Accuracy
4. % of selling expense over sales
5. % Marketing differentiation cost/ incremental revenue for differentiated products
Can someone point out which functional area this report belong to (COPA or LO) and if possible to point out the data source that is related to reports
Your help highly appreciated
Thank you
Br
Saravanan Ramasamy

check out the answer at ABAP forum
BAPI/RFC - Function module code explanation-VERY URGENT!!!!!
Regards
Raja

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

Hello All,
We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
Looking forward to your prompt help.
Thanks,
Rahul

Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
I attached a RTF template to the concurrent program to have the output in XML.
When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
I also tried looking into the XML generated through View XMl and there too no output file is generated.
I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
All pointers to this issue are welcome.
Thanks,
Rahul

Data source for SQR reporting

Is it possible to use the Brio Query or Report Results as a data source for an SQR report? Instead of accessing a database for an SQR, can I use the Results section instead?

N0 you need to create ur own generic datasource for line items - it is not delivered.
0FI_GL_4 reads BSEG and BKPF
where as the new Gl line items is based on table FAGLFLEXA

Stored Procedure used as a data source for an Apex report

Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ?
Thank you.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "920338".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions).
Do you have to return the definition of the Stored Procedure via a function ... if so, how is this done ? When asking a question about "reports" it's firstly essential to differentiate between standard and interactive reports. Standard reports can be based on tables, views, SQL queries, or PL/SQL function blocks that return the text of a SQL query. Interactive reports can only be based on a SQL query.
"Stored Procedures" are therefore not an option (unless you are using the term loosely to describe any PL/SQL program unit located in the database, thus including functions). What would a procedure used as the source of a report actually do? Hypothetically, by what mechanisms would the procedure (a) capture/select/generate data; and (b) make this data available for use in an APEX report? Why do you want to base a report on a procedure?

CRM 7.0 - Enhancement of Data Sources for interactive Reporting

Hallo All,
I would like to know whether anybody has positive experience with the enhancement of CRM Data Sources for interactive Reporting. I read that the enhancement of Customer fields should be possible (Those Data Sources below the Hierarchy node /CRMBW/ROOT).
I have seen that the extract structure can be enhanced via RSA6 (as for other data sources).
Questions:
1. Which USEREXIT / BADI has to be used to fill the added fields?
2. Does it work?
Best regards

Hi!
Those DS are not meant to be enhanced manually but only by one of the following two ways:
1. Adding custom fields with the Application Enhancement Tool (AET) in the CRM UI.
2. Adding SAP fields with the Interactive Reporting Enhancement Workbench (IREW).
The AET is available since CRM 7.0. Please find more details in the SAP Help Portal:
<http://help.sap.com>
 SAP Business Suite
 SAP Customer Relationship Mgmt.
 SAP EHP1 for CRM 7.0
 Application Help
 WebClient UI Framework
 Application Enhancement Tool
The IREW is available since CRM 7.0 EhP1. More details can be found inside TX CRMD_IREW or in the SAP Help Portal:
<http://help.sap.com>
 SAP Business Suite
 SAP Customer Relationship Mgmt.
 SAP EHP1 for CRM 7.0
 Application Help
 SAP Customer Relationship Management
 Analytics
Best regards

Universe as data source for Crystal Reports

Are there any issues in using a Universe as the data source for a crystal reports? We are using Business Objects Enterprise XI R2 and Crystal Reports XI R2.
Thanks in advance for your response,
Garet Wicker

Hi,
We can have a parameter from a Universe, following are the steps which will create the report which is based a Universe with a parameter.
-connect to the universe and you will a Query Panel.
-drag some objects in the Result Objects field. Ex. Country, Revenue.
-then drag an object in the Query Filter. Ex. Country.
-then a new window will appear as Filter Editor.
-Select the prompt option and also select the check box as u201CSelect only from listu201D.
-Click on Ok.
When you refresh the report then there will be a parameter prompting for the Country field. Also you will see a parameter created automatically in the parameter list.
However if you try to create a new parameter (without modifying anything from the query panel) by with the following workflow then there is no option to select the field for the parameter.
-Right click on Parameter fieldsu2014New parameter.
-When you click on the drop down list in the u201CValue Fieldu201D list there are no available fields/objects.
Hence we can create a parameter in CR which is connected to the Universe with the steps mentioned above.
I hope this helps you.
Regards,
Prashant.

HOW TO CREATE SAP BW DATA SOURCES FOR TDS REPORT?

Hi All,
How to create generic data source for these fields?
I have TDS report these names and field.
Pls anyone guide me..
PAN NUMBER
J_1IPANNO
VENDOR NAME (accont type - k)
LIFNR
POSTING DATE
BUDAT
WITHHOLDING TAX BASE
WT_QSSHH
WITHHOLDING TAX AMOUNT
WT_QBSHH
NAME OF WITHHOLD TAX TYPE
WITHT

Hi ,
Thanks for giving info.
How to add different tables in generic data source?
PAN NUMBER
J_1IPANNO
J_1IMOVEND
VENDOR NAME (accont type - k)
LIFNR
J_1IMOVEND
POSTING DATE
BUDAT
RBKP
WITHHOLDING TAX BASE
WT_QSSHH
WITH_ITEM
WITHHOLDING TAX AMOUNT
WT_QBSHH
WITH_ITEM
NAME OF WITHHOLD TAX TYPE
WITHT
WITH_ITEM

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Sharepoint 2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi,
i had the same problem. First we figured out, that the Report Builder was working in the Root Site Collection of a Web Application but not in any other Site Collection of the WebApplication.
After that we took a look how the Report Builder is started. The Content Type got a Click Once Application as Template, but you can't open the URL in the Browser neither the referenced file can be found in the Feature folder on the SharePoint Server. Turns
out SharePoint does some crazy http redirection and that this doesn't work on Site Collections which are not at the root. At least if you installed Reporting Services Add In Service Pack 1.
Fun Fact: If you start the Report Builder on the Root Site Collection you can create a Report which works on any Site Collection. Its just the launch if the Report Builder which is broken.
Our Solution was the SQL Server 2012 Service Pack 1 Cumulative Update 8 which fixed the Problem.
You can request a download here: http://support.microsoft.com/kb/2917531
Select the "2012_SP1_RSShrPnt_CU8_2917531_11_0_3401_x64" Fix and install it on every SharePoint Server in your Farm.

SP2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi Ali,
According to the current description, the issue may occur because SQL Server 2012 Reporting Services add-in feature for SharePoint 2013 isn’t installed correctly.
To resolve the issue, you need to reinstall add-in feature for SharePoint 2013.
References:
Install or Uninstall the Reporting Services Add-in for SharePoint
Document Library - Enable New Document, Edit Document Features
If the issue persists, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Html or other data source for report

Similar Messages

Maybe you are looking for