HTML output from Maven report

Is there a way to get HTML output from the Maven report? When I do a site generation, I see pmd.xml in the target directory and a flexpmd.html file in target/site, but flexpmd.html is essentially empty. I don't see any configuration option for this. The "regular" PMD plugin always outputs HTML and the XML output is an option (although it defaults to on): http://maven.apache.org/plugins/maven-pmd-plugin/pmd-mojo.html#format

Actually, flex-pmd-maven-plugin 1.0.RC4 understands this in the configuration tag:
     <outputDirectory>${project.build.directory}/site</outputDirectory>
     <targetDirectory>${project.build.directory}/site</targetDirectory>
With this, "pmd.xml" and "flexpmd.html" are placed in the site folder, but "flexpmd.html" is replaced later with the empty site report template. So, no real gain here.
Any ideas on how to integrate the "flexpmd.html" file with the site reports?

Similar Messages

  • Generate an HTML file from a Report in ABAP

    Good morning,
    How I could generate an HTML file from a report.
    Any Ideas... I have found the function WWW_ITAB_TO_HTML, but someone has the standar code and how use this function?
    Thanks a lot,
    Hernán Restrepo

    Hi,
    I am facing a similar problem.I did try using the function module WWW_ITAB_TO_HTML in the reoprt program, as I'm trying to generate a url from a report, but i'm not able to get the expected results. The code is given below. Could someone please try and help me resolve this issue.Thanks in advance.
    DATA:   emp_name                     TYPE char80.
    DATA:   it_itabex                    TYPE zdb_ex_tty,
            it_emp                       TYPE TABLE OF zis_emp,
            it_org                       TYPE TABLE OF zis_org,
            it_pos                       TYPE TABLE OF zis_pos,
            it_pos_alloc                 TYPE TABLE OF zis_pos_alloc,
            it_res                       TYPE TABLE OF zis_res,
            it_res_alloc                 TYPE TABLE OF zis_res_alloc,
            ls_itabex                    TYPE zdb_ex_s.
    DATA:   lv_filename                  TYPE string,
            lv_path                      TYPE string,
            lv_fullpath                  TYPE string,
            lv_replace                   TYPE i.
    DATA qstring LIKE it_itabex OCCURS 10.
    DATA: url(200), url2(200), url3(200), fullurl(200).
    FIELD-SYMBOLS: <fs_emp>              LIKE LINE OF it_emp,
                   <fs_org>              LIKE LINE OF it_org,
                   <fs_pos>              LIKE LINE OF it_pos,
                   <fs_pos_alloc>        LIKE LINE OF it_pos_alloc,
                   <fs_res>              LIKE LINE OF it_res,
                   <fs_res_alloc>        LIKE LINE OF it_res_alloc.
    Report Program to export data from database to Excel.
    Populate all the tables that have to be exported.
    SELECT * FROM zis_org       INTO TABLE it_org.
    SELECT * FROM zis_pos       INTO TABLE it_pos.
    SELECT * FROM zis_pos_alloc INTO TABLE it_pos_alloc.
    SELECT * FROM zis_emp       INTO TABLE it_emp.
    SELECT * FROM zis_res_alloc INTO TABLE it_res_alloc.
    SELECT * FROM zis_res       INTO TABLE it_res.
    Append the Column Header
    CLEAR ls_itabex.
    ls_itabex-ipp_pos_id            = 'IPP Pos ID'.
    ls_itabex-emp_name              = 'Name'.
    ls_itabex-dt_of_join            = 'JoinedOn'.
    ls_itabex-emp_status            = 'Status'.
    ls_itabex-org_name              = 'Org'.
    ls_itabex-prj_name              = 'Project'.
    ls_itabex-mgr_name              = 'Line'.
    ls_itabex-designation           = 'Designation'.
    ls_itabex-specialization        = 'Specialization'.
    APPEND ls_itabex TO it_itabex.
    Append all the tables into one internal table
    LOOP AT it_pos_alloc ASSIGNING <fs_pos_alloc>.
      CLEAR ls_itabex.
      ls_itabex-ipp_pos_id          = <fs_pos_alloc>-ipp_pos_id.
      READ TABLE it_emp ASSIGNING <fs_emp> WITH KEY emp_guid = <fs_pos_alloc>-emp_guid.
      IF sy-subrc = 0.
        CONCATENATE <fs_emp>-emp_fname <fs_emp>-emp_lname INTO ls_itabex-emp_name  SEPARATED BY space.
        ls_itabex-dt_of_join        = <fs_emp>-dt_of_join.
        ls_itabex-emp_status        = <fs_emp>-emp_status.
        ls_itabex-specialization    = <fs_emp>-specialization.
      ENDIF.
      READ TABLE it_pos ASSIGNING <fs_pos> WITH KEY ipp_pos_id = <fs_pos_alloc>-ipp_pos_id.
      IF sy-subrc = 0.
        ls_itabex-designation       = <fs_pos>-designation.
        READ TABLE it_org ASSIGNING <fs_org> WITH KEY  org_id = <fs_pos>-org_id.
        IF sy-subrc = 0.
          ls_itabex-org_name        = <fs_org>-org_name.
          ls_itabex-mgr_name        = <fs_org>-mgr_name.
        ENDIF.
      ENDIF.
      READ TABLE it_res ASSIGNING <fs_res> WITH KEY org_id = <fs_org>-org_id.
       ls_itabex-org_name         = <fs_org>-org_name.
      APPEND ls_itabex TO it_itabex.
    ENDLOOP.
    url = 'http://testweb/scripts/wgate/zvw10a/!?~language=en'.
    url2 = '&~OkCode(LGON)=LGON&login-login_user='.
    url3 = '&vbcom-vbeln='.
    CONCATENATE url url2 url3 INTO fullurl.
    WRITE: /'Staffing Excel'.
    CALL FUNCTION 'WWW_SET_URL'
      EXPORTING
        offset        = 12
        length        = 10
        func          = fullurl
      TABLES
        query_string  = qstring
      EXCEPTIONS
        invalid_table = 1
        OTHERS        = 2.
    Thanks & Regards,
    Preethi.

  • Help: No Parameters, HTML Output from Java Servlet

    I have a Java Servlet that reads parameters passed from an HTML form and displays them to another HTML page. I know the servlet is being invoked; however, I am not seeing any HTML output. Sending the output to a file reveals the parameters are coming in as NULL as well.
    I attempted a simple sample app with the same results. Here is what I am running:
    The HTML Form:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <HTML>
    <HEAD>
    <TITLE>Collecting Three Parameters</TITLE>
    </HEAD>
    <BODY BGCOLOR="#FDF5E6">
    <H1 ALIGN="CENTER">Collecting Three Parameters</H1>
    <FORM ACTION="ThreeParams">
    First Parameter: <INPUT TYPE="TEXT" NAME="param1"><BR>
    Second Parameter: <INPUT TYPE="TEXT" NAME="param2"><BR>
    Third Parameter: <INPUT TYPE="TEXT" NAME="param3"><BR>
    <CENTER><INPUT TYPE="SUBMIT"></CENTER>
    </FORM>
    </BODY>
    </HTML>
    The Java Code:
    public class ThreeParams extends HttpServlet {
    public void doGet(HttpServletRequest request,
    HttpServletResponse response)
    throws ServletException, IOException {
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    String title = "Reading Three Request Parameters";
    out.println("<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 " +
         "Transitional//EN\">\n" +
    "<BODY BGCOLOR=\"#FDF5E6\">\n" +
    "<H1 ALIGN=\"CENTER\">" + title + "</H1>\n" +
    "<UL>\n" +
    " <LI><B>param1</B>: "
    + request.getParameter("param1") + "\n" +
    " <LI><B>param2</B>: "
    + request.getParameter("param2") + "\n" +
    " <LI><B>param3</B>: "
    + request.getParameter("param3") + "\n" +
    "</UL>\n" +
    "</BODY></HTML>");
    What happens when I "submit" from the form is the same form reloads with the query string in the URL: "http://localhost:8080/ThreeParams/?param1=1&param2=2&param3=3"
    Any assistance with either (or both) would be thoroughly appreciated:
    a) why the parameters are not being passed correctly to the servlet
    b) why the HTML output page is not displayed
    Thanks in advance!
    - Steve

    I have found the answer to my problem listed in another thread.
    Thank you.

  • EBS: Email XML publisher output, from After Report Trigger in Data Template

    Here is what I'm trying to do:
    -- In EBS (11.5.10 CU2), I'm using XML publisher (5.6.2) data template and layout template to generate Output files (PDF, EXCEL etc)
    --In the Data Template's AfterReport Trigger, I'm using the Concurrent Request Id to locate the Output file name and trying to Email that output file.
    Problem:
    -- When the AfterReport trigger code is executed, the code is NOT seeing the output file and hence the file is NOT emailed.
    Observations/Questions:
    -- From what I observe, the Output Post Processor ( that generates the Excel / PDF files) is running AFTER the code in AfterReport trigger... and hence the AfterReport trigger is Not quite seeing / able to access the output file.
    So, the sequence of execution seems to be:
    -- Before Report Trigger
    -- Data Query (SQL statement)
    -- After Report Trigger
    -- Output Post Processor
    Because the AfterReport Trigger is running before the Output Post Processor, it is Not able to see the output file. Is that a True statement?
    If Yes, how else can the DataTemplate access the Output file?
    If No, what could cause the AfterReport trigger to not see the output file?

    Because the AfterReport Trigger is running before the Output Post Processor, it is Not able to see the output file. Is that a True statement?
    I believe so, as the OPP works on the output of the Report after the Report has completed execution.
    You could use the same approach as we do for bursting the report to different users. Write a Java Concurrent program based on "oracle.apps.xdo.oa.cp. XMLPReportBurst" with delivery channel Email to send the email output. You would need to add code to launch the Concurrent child request in your AfterReport Trigger:
    function AfterReport return boolean is
    jreq_id number;
    begin
    srw.message (100, 'DEBUG: AfterReport_Trigger +');
    jreq_id:= FND_REQUEST.SUBMIT_REQUEST ('XDO','XDOBURST','','',FALSE,:P_CONC_REQUEST_ID,'Y',chr(0),
    If (jreq_id=0)
    then
    srw.message (100,'Request id is zero');
    end if;

  • Is it Possible to upload the output from Oracle reports To Access database

    Hi All,
    Wish you All a Very Happy New Year.
    I have a query.Is it possible to
    upload the output from the Oracle reports
    to the Access database???
    Any suggestions would be appreciated.
    TIA
    sg

    Hi sg,
    Research the DDE option.
    Dynamic Data Exchange (DDE) is a mechanism by which applications can communicate and exchange data in Windows.
    I have imported data into the excel spreadsheet using DDE built in functions. I am sure it can work with MS Acess as well. If not, then you need to create a 2 step process .. reports -> excel -> access.

  • .CSV output from Oracle reports 10g (from Oracle application)

    Dear all,
    I have a requirement to give an Oracle 10g report which will be deployed in Oracle RMS application.
    When the report is run thru the application, it should give the output in .CSV format.
    But, by default when the report is run thru the application, its giving the output in PDF format.
    Can any one help me in this and guide me how to get a .csv output from the Oracle reports in the RMS application.
    Thanks,
    Suma

    pls reply

  • Capture generated html output from jsf page in bean

    Hi Member,
    I have need to capture the html output coming form jsf page. means aftr rendering what html is displayed before user, we have need to get it in programm.
    like if we use:
    <h:dataTable......>
    <h:colum>heloo</h:column>
    </h:dataTable>
    then their ouput will be:
    <table>
    <tr><td>heloo</td></tr>
    </table>
    and i have need of these complete line with <table> ......</table>
    Please help me...
    Thanks
    Shailendra Kumar

    Thnx for quick reply.
    But i want to capture it in render response phase. May it will be possible??? Is render response phase is responsible for generation of HTML format?? If yes then how can we capture output coming from this phase.
    URLConnection if fine but it still hit server once. I don't want that. I want to store page html format during its view preparation for html.
    Thanks
    Shailendra Kumar

  • XML output from Repostiory Reports

    Hi,
    Any ideas why the table definition report (cktci.rdf) data from the Repository Reports cannot be generated to XML?
    I'm running Designer ver. 9.0.2.91.9, Reports ver. 9.0.2.0.3 . XML is not on the destination format list in Repository Reports, but if you type in xml, the DESFORMAT parameter is correctly set to it. However, only part of the data model is output to the xml file:
    &lt;?xml version="1.0"?&gt;
    &lt;!-- Generated by Oracle Reports version 9.0.2.0.3 --&gt;
    &lt;CKTCI&gt;
    &lt;LIST_G_IRID&gt;
    &lt;G_IRID&gt;
    &lt;IRID&gt;*****&lt;/IRID&gt;
    &lt;NAME&gt;SODO&lt;/NAME&gt;
    &lt;LIST_G_LEV&gt;
    &lt;G_LEV&gt;
    &lt;VERSION&gt;1.8&lt;/VERSION&gt;
    &lt;LEV&gt;0&lt;/LEV&gt;
    &lt;/G_LEV&gt;
    &lt;/LIST_G_LEV&gt;
    &lt;CS_TABS&gt;1&lt;/CS_TABS&gt;
    &lt;/G_IRID&gt;
    &lt;/LIST_G_IRID&gt;
    &lt;D_USERNAME&gt;REP_OWNER&lt;/D_USERNAME&gt;
    &lt;D_USERNAME1&gt;&lt;/D_USERNAME1&gt;
    &lt;F_COL_DET&gt;N&lt;/F_COL_DET&gt;
    &lt;F_VW&gt;&lt;/F_VW&gt;
    &lt;F_SNP&gt;&lt;/F_SNP&gt;
    &lt;TABLES_YN&gt;Yes&lt;/TABLES_YN&gt;
    &lt;VW_TYPE&gt;No&lt;/VW_TYPE&gt;
    &lt;SNP_TYPE&gt;No&lt;/SNP_TYPE&gt;
    &lt;COL_DET&gt;Yes&lt;/COL_DET&gt;
    &lt;D_TABTY1&gt;&lt;/D_TABTY1&gt;
    &lt;CF_PROP_NAME&gt;&lt;/CF_PROP_NAME&gt;
    &lt;P_NULL_IND&gt;Optional ? : &lt;/P_NULL_IND&gt;
    &lt;P_DOMAIN_NAME&gt;Domain : &lt;/P_DOMAIN_NAME&gt;
    &lt;P_UPPERCASE&gt;Uppercase ? : &lt;/P_UPPERCASE&gt;
    &lt;P_ORAC_SEQ&gt;Sequence : &lt;/P_ORAC_SEQ&gt;
    &lt;P_DEF_VAL&gt;Default Value : &lt;/P_DEF_VAL&gt;
    &lt;P_ORD_SEQ&gt;Order By Sequence : &lt;/P_ORD_SEQ&gt;
    &lt;P_SORT_ORD&gt;Sort Order : &lt;/P_SORT_ORD&gt;
    &lt;D_YN&gt;&lt;/D_YN&gt;
    &lt;D_YES&gt;Yes&lt;/D_YES&gt;
    &lt;D_NO&gt;No&lt;/D_NO&gt;
    &lt;D_NULL&gt;Yes&lt;/D_NULL&gt;
    &lt;D_NOT_NULL&gt;No&lt;/D_NOT_NULL&gt;
    &lt;D_NULL_IND&gt;&lt;/D_NULL_IND&gt;
    &lt;D_VERSION&gt;1.8&lt;/D_VERSION&gt;
    &lt;D_CONTAINER&gt;ZSI-WARTA/SODO&lt;/D_CONTAINER&gt;
    &lt;D_VERSION1&gt;&nbsp&lt;/D_VERSION1&gt;
    &lt;D_CONTAINER1&gt;&nbsp&lt;/D_CONTAINER1&gt;
    &lt;COUNTER&gt;*****&lt;/COUNTER&gt;
    &lt;/CKTCI&gt;
    The biggest problem is that the main group G_APP from the report definition is not generated to XML, in spite of its parameter "Exclude from XML Output" being set to No. Any ideas why this happens?
    Regards,
    Tomasz

    hello,
    you can specify the look of the XML tags in the "XML Settings" property of the respective field. so let's say your datamodel has the colun called NAME then by default the xml tag would look soemthing like this
    <NAME>this is the value </NAME>
    now if you set the value for the
    "XML Tag" property and the "XML Tag Attributes" property to e.g. facet and name="his-name"> (the * is just to terminate the the values in this text) the generated XML tag would look something like
    <facet name="his-name">name="his-name"></facet>
    columns that are not in the datamodel (like i asume you mean by <stuff> and <futurestuff> you can create by adding formula columns into your datamodel. formula columns have the same "XML settings" section in their property sheet and can be modified accordingly.
    hope this is what you are looking for.
    thanks,
    ph.

  • How to embed an attachment in rtf(excel output) from oracle reports

    Hi,
    I have a requirement to embed an attachment from oracle reports(fnd_lobs) into rtf template which will generate excel output.
    Can you please provide me suggestions on this.
    Thanks,
    Kavya

    Hi,
    I will judge few records whether to display or not. i am using one variable to handle its display.
    i want to avoid using IF in my templated .
    Please suggest the best way
    Regards,
    Phani Reddy

  • How to exlcude HTML Tags from Excel Reports

    Hi Guys
    Within Project Online - OData extract to Excel
    Has anyone found a way to eliminate the HTML tags from Multi Line Text fields within Project Server? I can easily extract the text and generate nice Excel Reports, but the html tag is very annoying in the Excel Reports and it doesn't read easily.
    Any help would be appreciated.
    Marc Soester [MVP] http://marcsoester.blogspot.com

    Marc, 
    What you could do (given that you find the required time and energy to write the lines),
    would be to replace all (!) html characters like here (http://stackoverflow.com/questions/14705605/remove-html-tags-from-cell-strings-excel-formula -
    this is one of the Excel UDF/VB-based solutions, but will not refresh in Excel Services - however there is a good list of what to replace) with PowerQuery.
    That would refresh over a PowerBI subscription in the least..
    -Ville

  • Need Formatted html output from Xalan

    We use xalan xslt processor to convert
    xml document to html. Everything works
    fine, except the output is unformatted html.
    (ie. several HTML elements appear on the
    same line. Some lines are longer than 1000
    characters). This happens inspite of me
    specifying the HTML elements in different
    lines in the xsl.
    I would like to know if there is any way, I can generate formatted html output.
    Thanks

    have u tried
    <xsl:output indent="yes"/>
    in your stylesheet?
    ravi <[email protected]> wrote:
    We use xalan xslt processor to convert
    xml document to html. Everything works
    fine, except the output is unformatted html.
    (ie. several HTML elements appear on the
    same line. Some lines are longer than 1000
    characters). This happens inspite of me
    specifying the HTML elements in different
    lines in the xsl.
    I would like to know if there is any way, I can generate formatted html
    output.
    Thanks

  • Text output from 11i Reports to Excel - bad Format

    Hi All,
    We have a report in Oracle Apps 11i(11.5.10) with Text as output format. We would like to open the file in Excel format.
    We have done the recommended setups from the metalink note ID 316752.1.
    Output is generated in Excel, but the format is not proper. Column level data is not displayed on Cell wise in the Excel, instead all the output is
    dispalyed in single column in the Excel.
    Any pointers on how to format the output to align each column in the output to the individual cell in the Excel.
    Or else.. how to generate the output to Excel file?
    Regards,
    Ram

    Consider a 3rd-party tool as a solution.  For a list of such tools, see http://www.kenhamady.com/bookmarks.html.
    There is at least one Report Manager on that list that can automate the process of exporting a Crystal report to PDF and converting the resulting PDF to an image (BMP, JPEG, WMF, EMF, EPS, PNG, GIF, or TIF).  You can call that Report Manager from your application via a command line api.
    - Ido

  • HTML output from within PL/SQL

    I have some procedures that use dynamic SQL to select data. I would like to post this data by email using the HTML table format.
    Is there some simple way to produce html from PL/SQL?
    I would like to get the output similar to a SET command in SQL (SET MARKUP HTML ON), how can this be acomplished in PL/SQL?

    but my basic problem is how to generate a HTML table as a result of some select statement (which is dynamic, so i don't know the columns and their types at the time of programming).How about
    SQL>  declare
    p_thequery long := 'select * from dept';
    p_max_rows number := 100;
    param_val owa.vc_arr;
    thepage htp.htbuf_arr;
    irows number := 1000000;
    begin
    param_val (1) := 1;
    htp.adddefaulthtmlhdr (false);
    owa.init_cgi_env (param_val);
    htp.tableopen ();
    owa_util.cellsprint (p_thequery,
                          p_max_rows);
    htp.tableclose ();
    htp.get_page (thepage,
                   irows);
    for i in 1 .. thepage.count
    loop
      dbms_output.put_line (thepage (i));
    end loop;
    end;
    <TABLE >
    <TR>
    <TD>10</TD>
    <TD>ACCOUNTING</TD>
    <TD>NEW YORK</TD>
    </TR>
    <TR>
    <TD>20</TD>
    <TD>RESEARCH</TD>
    <TD>DALLAS</TD>
    </TR>
    <TR>
    <TD>30</TD>
    <TD>SALES</TD>
    <TD>CHICAGO</TD>
    </TR>
    <TR>
    <TD>40</TD>
    <TD>OPERATIONS</TD>
    <TD>BOSTON</TD>
    </TR>
    </TABLE>
    PL/SQL procedure successfully completed.?

  • Mail a HTML atachment from ABAP report

    Hi Experts,
    I want to e-mail an HTML file( containing icons and gif images) as an attachment from an ABAP report. Could u provide assisteence on how this is to be done?
    Kindy help..
    Regards.

    Check the below links. I think, it may be useful.
    http://help.sap.com/saphelp_nw04/helpdata/en/04/9d5a23c19f49f1a40761e603286602/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/9d5a23c19f49f1a40761e603286602/frameset.htm
    http://www.geocities.com/rmtiwari/
    Regards,
    Maha

  • Fetch output from Sumbittted Report Painter Program

    Hi All,
    My requirement is as below,
    I have to fetch the data from transaction --> KE30( AE00-0000000) -( Program GP3U541QI0A8T1INIRH8IJPKU2T ) and use the same for further calculation in my custom report.
    Hence in my custom report i have written SUBMIT GP3U541QI0A8T1INIRH8IJPKU2T                                                                               
    EXPORTING LIST TO MEMORY
                                                                                    WITH the required selection screen parameters                                                                               
    AND RETURN
    After that, I have used the function modules  'LIST_FROM_MEMORY' and 'LIST_TO_ASCI' as well, in order to fetch the data.
    However I am not getting the data into the LIST_FROM_MEMORY function module.
    Please suggest me the approach or please correct me in the above approach.
    Thanks a lot in advance for your replies.
    Regards
    Anuja.

    Hi Anuju ,
    try this way
    TYPE-POOLS : abap.
    DATA:lt_listobject TYPE TABLE OF abaplist,
         l_tab_lines TYPE i.
    DATA: txtlines(3000) TYPE c OCCURS 0 WITH HEADER LINE.
    * Submit you r progam......
      SUBMIT <report>
                       EXPORTING LIST TO MEMORY AND RETURN.
    * read list from memory into table
      CALL FUNCTION 'LIST_FROM_MEMORY'
        TABLES
          listobject = lt_listobject.
    *Spool content in Ascii format
      CALL FUNCTION 'LIST_TO_ASCI'
        TABLES
          listobject         = lt_listobject
          listasci           = txtlines.
    *  write Spool data as an output
       CALL FUNCTION 'WRITE_LIST'
        TABLES
          listobject = lt_listobject..
    * clear memeory
      CALL FUNCTION 'LIST_FREE_MEMORY'
        TABLES
          listobject = lt_listobject.
    Prabhudas

Maybe you are looking for