Html pages in abap

i want to make my login screen with html and give hyper links to text on that page.
this will lead me to a transaction.how can i do that?

Hi Nisha,
I would recommend you to first create a program in SAP in such a way that first you log into this screen which would allow you to create hyperlinks and all that fancy stuff..
I have worked on a similar idea of dashboard and implemented this model..
-> First create a program with custom controls..(HTML, picture control etc)..
-> Make this tcode as default tcode (first tcode as soon as the user logs in).
-> use sample program 'SAPHTML_EVENTS_DEMO' for your requirement..
Let me know if could help you further..
BR
Rakesh

Similar Messages

How to display a HTML page using ABAP program.

Hi all,
I know that this is easy and possible too but I haven't worked on this kind yet. I need to display a screen/ABAP program like TCODE PPMDT, where an HTML page is to be displayed and on the click of the HTML links provided, I need to navigate to someother transaction codes.
Cheers,
Sam

Hi,
See this sample code
REPORT ZTESTHTML .
DATA: ok_code LIKE sy-ucomm,
      myurl(132).
data: custom_container type ref to cl_gui_custom_container,
      myhtml type ref to CL_GUI_HTML_VIEWER,
      repid like sy-repid.
DATA events TYPE cntl_simple_events.
DATA wa_events TYPE cntl_simple_event.
      CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS NC_Handler
            FOR EVENT NAVIGATE_COMPLETE OF CL_GUI_HTML_VIEWER
            IMPORTING URL.
ENDCLASS.
      CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD NC_Handler.
    myurl = URL.
ENDMETHOD.
ENDCLASS.
start-of-selection.
set screen 100.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
    WHEN 'BACK'.
      CALL METHOD myhtml->go_back
           EXCEPTIONS cntl_error = 1.
      if sy-subrc ne 0.
      endif.
    WHEN 'FORW'.
      CALL METHOD myhtml->go_forward
           EXCEPTIONS cntl_error = 1.
      if sy-subrc ne 0.
      endif.
    WHEN 'STOP'.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'REFR'.
      CALL METHOD myhtml->SHOW_URL
           EXPORTING
              URL = myurl
              IN_PLACE = 'X'
              FRAME = ''
           EXCEPTIONS
              CNTL_ERROR = 1
              CNHT_ERROR_NOT_ALLOWED = 2
              CNHT_ERROR_PARAMETER = 3
              DP_ERROR_GENERAL = 4.
    WHEN 'OTHERS'.
      CALL METHOD CL_GUI_CFW=>DISPATCH.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MENU'.
if myhtml is initial.
    CREATE OBJECT custom_container
       EXPORTING
          CONTAINER_NAME = 'CONTAINER1'
       EXCEPTIONS
          CNTL_ERROR = 1
          CNTL_SYSTEM_ERROR = 2
          CREATE_ERROR = 3
          LIFETIME_ERROR = 4
          LIFETIME_DYNPRO_DYNPRO_LINK = 5.
    CREATE OBJECT myhtml
       EXPORTING
          PARENT = custom_container
       EXCEPTIONS
          CNTL_ERROR = 1
          CNTL_INSTALL_ERROR = 2
          DP_INSTALL_ERROR = 3
          DP_ERROR = 4.
    wa_events-eventid = CL_GUI_HTML_VIEWER=>M_ID_NAVIGATE_COMPLETE .
    wa_events-appl_event = 'X'.
    APPEND wa_events TO events.
    CALL METHOD myhtml->set_registered_events( events = events ).
    SET HANDLER lcl_event_receiver=>NC_Handler FOR myhtml.
    CALL METHOD cl_gui_cfw=>flush
         EXCEPTIONS cntl_system_error = 1
                    cntl_error        = 2.
endif.
ENDMODULE.                 " STATUS_0100 OUTPUT
Svetlin

Need help on how to use Html pages in ABAP

Hi All,
I need to add two input boxes to an already existing html page,and i have written the code for it,but the problem is ,when i try to open that page i could not see the newly added input boxes on the page and also i am getting an error as below
an error has occured in the script on this page
Line : 1
Char : 24760
Error : 'null' is null or not an object
code : 0
can any one provide me some inputs to solve this issue.

Hi,
Did you solved the issue? if not please post your HTML Code maybe there is something wrong or missing in there.
Kind Regards,
Gerardo J

Call a HTML page from ABAP dynamically

Hi,
My requirement : I need send information to a specific URL in a HTML format and get a response ( just the status)
We are using an implicit enhancement to gather the details for this. Once the values are populated into form we need to send this form to a specific URL when the customer is getting saved on XD01/ XD02.
The HTML will not be shown to the user hence I cannot download and then use the execute option using CL_GUI_FRONTEND_SERVICES. ( I have already tried this option and it working perfectly fine )
Any suggestions of the best way of achieving this ?
Thank you.
Regards,
narayani

Hi,
to get the data from URL(http) we have so many function modules under function group SFTP ,recently i used HTTP_GET to get the data from url.
but i don't know how to send the data to url ,but this following link may helps you,
https://help.sap.com/saphelp_nw04/helpdata/en/2b/d920434b8a11d1894c0000e8323c4f/content.htm

Set DOCTYPE for a self rendered HTML page using cl_gui_html_viewer

G'Day!
I'm dealing with HTML in ABAP and i' stuck with a nasty little problem. Perhaps somebody know's the answer and can help me out. Thanks in advance. (I'm sorry for my poor english)
My problem is:
I am rendering a html page in abap and display ist using a cl_gui_html_viewer.
Works fine.
But now in need to set the right DOCTYPE for the rendered html page.
If i add the DOCTYPE definition, my html page is not displayed, instead i get a display of the html-code??
To break it down to the root:
How can i add the DOCTYPE definition to a self-rendered html page?
If i add the DOCTYPE definition as first element of my html table, the html code won't be interpreted.
If i do not add the DOCTYPE defintion everything works fine.
I need the DOCTYPE definition so that the browser won't get into quirks mode and interpretes the html tag's right.
What i've done so far:
(Dynpro, container, html_viewer)
Load my JScripts (with load_mime_object)
Load my CSS (with load_mime_object)
Load my HTML:
-- lt_html TYPE w3htmltab
((-- APPEND '<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN">' TO ct_html.)) this line cause my trouble
-- filled the itab with my html tags <html>....</html> (set right url for Jscript and CSS)
-- Load my html table and get an URL CALL METHOD gr_labform_html->load_data
-- Load the url CALL METHOD gr_labform_html->show_url

I've "solved" my issue with a little workaround.
I created an empty html page with an existing DOCTYPE def and an tag like <!MYDATA!>
After that i filled 'l_merge_table TYPE swww_t_merge_table' with my tag and my html_data.
Loaded the whole thing with CALL METHOD gr_labform_html->load_html_document and now the DOCTYPE is set fully correct!
But i'm still interessted why i can't set the DOCTYPE directly? Anybody knows?
Got the idea from: Re: How can I read color from frond-end PC

Display ABAP variable in an HTML page

I am trying to display an ABAP variable in an HTML page. What is the syntax for the same? Kindly help.

Thats exactly what im doing...modifying a class to change the properties of the table in a web template. Srry its not a BSP page....
I tried ur syntax..
concatenate '<table><tr><td colspan=6 style="background:green;height:20px">'l_r_tmp_var'</td></tr></table>' into C_CELL_CONTENT.
.It gives an error..
After "'<table><tr><td colspan=6 style="background:green;height:20px">'", there must be a space or equivalent character (":", ",", "."). (":", "
And when i remove the single quotes from the variable...it gives an error...
Unable to interpret "'<table><tr><td colspan=6
style="background:green;height:20px">l_r_tmp_var</td></tr></table>'".
Possible causes: Incorrect spelling or comma error.
Plz help...

HTML Page in ebdynpro ABAP

Hi,
I am working in SAP Netweaver latest version.
My requirement is to display a HTML page in the view.I have used iframe functionality.The file has been imported to MIME and in the source area ,i have given this file name.
But the result is showimg as blank.Cany one help me to overcome this issue..

Hi Ramya,
Upload HTML Page as MIME Object and specify your HTML page name.
Please go through this..
IFRAME
http://help.sap.com/saphelp_nw2004s/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm
INSERTING MIME OBJ.
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/15a40b56080d1be10000000a114a6b/frameset.htm
also check this..
Re: html in web dynpro view
Cheers,
Kris.

HTML page with FLASH object doesn't reload upon a redirect

Am using: ECC 6.0 and ABAP SAPGUI development
Hi All,
I'm seeing a frustrating issue that i'm hoping others have seen and resolved.
Here is what i'm attempting and below that is the issue:
1) I have created a ABAP program in which i'm using the HTML viewer (class: cl_gui_html_viewer ) within a container that is on one of my ABAP screens.
2) I load up a web page on our (intra)network that displays an HTML page that has a nice FLASH navigation object. This navigation object operates as such - when a node is clicked it will go to another html page (on the same network) that will then parse apart what node they clicked on and via javascript submit a form in which I've defined a SAPEVENT for.
3) My ABAP program has defined the event handler for this sap event and calls the appropriate method just fine (ON_SAPEVENT). I am able to trap the event details and do some other things.
This is all working just fine, except....I want it to then go back to the first page (original page) that contained the FLASH navigation on it upon after the page that trapped the SAPEVENT is complete automatically. Easy? - that's what I thought...I tried several different ways to do this "go_back" on the html control, "show_url" (with the original URL)...even a redirect in the actual html page itself to go back.
They all DO go back to the first page, however my flash navigation object on that page NEVER shows up! It's almost like the frontend is thinking it is already loaded and will not load it again. I thought maybe I need to do a "flush" or some such - but that didn't seem to solve it. Has anyone seen this and resolved it or knows what this is? The thing is...I can completely exit out of the program - and the flash object will load just fine (but only after I wait a minute or so). What gives...anyone know?
Thanks in advance,
Matt

Am using: ECC 6.0 and ABAP SAPGUI development
Hi All,
I'm seeing a frustrating issue that i'm hoping others have seen and resolved.
Here is what i'm attempting and below that is the issue:
1) I have created a ABAP program in which i'm using the HTML viewer (class: cl_gui_html_viewer ) within a container that is on one of my ABAP screens.
2) I load up a web page on our (intra)network that displays an HTML page that has a nice FLASH navigation object. This navigation object operates as such - when a node is clicked it will go to another html page (on the same network) that will then parse apart what node they clicked on and via javascript submit a form in which I've defined a SAPEVENT for.
3) My ABAP program has defined the event handler for this sap event and calls the appropriate method just fine (ON_SAPEVENT). I am able to trap the event details and do some other things.
This is all working just fine, except....I want it to then go back to the first page (original page) that contained the FLASH navigation on it upon after the page that trapped the SAPEVENT is complete automatically. Easy? - that's what I thought...I tried several different ways to do this "go_back" on the html control, "show_url" (with the original URL)...even a redirect in the actual html page itself to go back.
They all DO go back to the first page, however my flash navigation object on that page NEVER shows up! It's almost like the frontend is thinking it is already loaded and will not load it again. I thought maybe I need to do a "flush" or some such - but that didn't seem to solve it. Has anyone seen this and resolved it or knows what this is? The thing is...I can completely exit out of the program - and the flash object will load just fine (but only after I wait a minute or so). What gives...anyone know?
Thanks in advance,
Matt

HTML Controls in ABAP (not ITS)

Hello...
How to build a HTML form and post it by internet inside SAPGUI (ABAP Program)....??? It's possible....???

Yes, its possiable. Check out the demo program
SAPHTML_EVENTS_DEMO. This uses an "internal" html page which interacts with the ABAP program using HTML control.
I've never done it, so I can't offer any simpler examples.
Regards,
Rich Heilman

How to include HTMLB in a HTML page

Hello all,
Is it possible to include for instance a HTMLB:tableview-element in a plain HTML page, with a minimum of HTMLB-elements?
So i have:
<HTML>
<HEAD>
    <TITLE>
    <TITLE>
</HEAD>
<BODY>
</BODY>
</HTML>
Where and what HTMLB-elements do i have to include to succeed?
The reason for my question is, that i have to include some additional elements in a standard generated page and i prefer to us HTMLB for it.
Thanx in advance.
Kind regards,
Martijn de Jong.

Hi,
   add the following code where ever you require a tableview...
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
<htmlb:page title = "display page ">
<htmlb:form>
      add tableview here....
</tmlb:form>
</htmlb:page>
</htmlb:content>
Regards,
Azaz Ali Shaik.

RAISE_EXCEPTION in Precalculated HTML pages scheduling

Hai All,
We are trying to schedule Precalculated HTML pages as daily process in the reporting agent of AWB. While scheduling we are facing RAISE_EXCPETION ABAP Dump error. How to avoid these ABAP dumps and go across scheduling.
Thx in Advance
Rajesh

Rajesh,
Please try to analyze the Short Dump. I think it won't useful for you. try search for OSS Notes. Precalculated HTML pages are SAP Provided functionality. i will try to search note for you.
I have a Question, i'm working on Precalculated HTML pages in my DEV Box. I processed that using Reporting Agent. Using Download Scheduler i downloaded to my PC. if i go check that HTML page, i'm getting service not available.
Note: i assigned my user to this in the reporting agent settings.
Regards,
Nagesh Ganisetti.

BSP(Business Server Page) in ABAP

Hi Sapient
I would like to knw how to use BSP (Busines Server Pages) wats the tcode and to navigate thru it?
Pls explain
Rewards of helpful answer
Regards
Santosh.

Hi,
to work on BSP's , goto SE80 transaction(object navigator),
and select BSP Application from the dropdown list provided.
and here u can create BSP application.
and by using the tagbrowser u can use html/htmlb tags for writing the code.
--->
BSP Concepts
Application Class
The application class, is a regular ABAP Objects class, that can be assigned to the BSP application, to ebcapsulate the BSP logic ans store data and make it available across BSP pages. This data is stored as attributes.
The only requirement for an application is that the constructor is parameter-less. If not, the application class cannot be generically instantiated by the BSP runtime environment.
The global object application can be used in the BSP application to access the attributes and methods of the application class.
You do not have to use an application class in your BSP application. It is an optional way for you to structure your BSP application .
The application class is assigned to the properties of the BSP application:
Application Basis Class CL_BSP_APPLICATION
If an application class does not already have a super class, it can be derived from the predefined base class CL_BSP_APPLICATION. This class provides methods that are typically required by a BSP application for embedding in a Web environment. This is how information about the current BSP application (such as session timeout, current URL of BSP application, state mode, and so on) can be called or set.
As the application object is an application attribute in every BSP event handler, the methods of the CL_BSP_APPLICATION class are also available with the corresponding inheritance. This makes it easy to provide the relevant functionality to lower application levels using a single object reference
Using the application class in an event
The application class is used just as an ordinary class
CALL METHOD application->kunde_gettable
IMPORTING
kunde_table = i_zkunder.
Statefull/Stateless
Statefull
A stateful BSP application is executed like a normal SAP transaction, independent of all user interactions - in one single context (roll area). This means that data specified by the user during the application execution or data determined by the application itself is available potentially throughout the entire execution duration of the session.
Stateless
Stateless BSP applications only block resources on the SAP Web Application Server during the time one single request is being processed. When the request has been processed, all resources in particular the application context are returned to the system for use in other requests.
Statefull or Stateless ?
As a rule of thumb, it is recommended that Internet scenarios used at the same time by a large number of users operate in stateless mode. Stateful programming is recommended for more complex applications that are used by a limited number of users in parallel and that operate with data that is expensive to determine.
BSP Tips and Tricks
How to use form fields in the event handler
This examples shows how to read the value of a form field, and use it in an event handler.
The user keys in the field zzkunnavn in the form nand presses then Save button.
Layout
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<html>
<title>Use form field</title>
<h1>Use form field</h1>
<body> <form method = "post" name="x">
<input type="text" size="50" maxlength="50"
name="zzkunnavn">
<input type=submit name="onInputProcessing(save)"
value="Save">
</form>
</body>
</html>
Page attributes
The field zzkunnavn must be defined in the Page attributes of the screen
Event handler OnInputProcessing
CASE event_id.
data: l_kunnavn type string.
WHEN 'save'.
Sets value of parameters, i.e. gets value from screen
navigation->set_parameter( name = 'zzkunnavn').
Gets value of parameter, so can be moved into abap field
Note: zzkunnavn declared in page attributes
l_kunnavn = navigation->get_parameter( name = 'zzkunnavn').
Regards,
vineela.
Edited by: Radha Vineela Aepuru on Mar 12, 2008 8:12 AM

A tree-view in HTML page with nodes generated with java script in run time is not visible in the UI Automation Tree. Need Help

I have a HTML page with an IFrame. Inside the Iframe there is a table with a tree view
<iframe>
<table>
<tr>
<td>
<treeview id="tv1"></treeview>
</td>
</tr>
</table>
</iframe>
In UIA, i am able to traverse till the tree view but not able to see it.
I have used the TreeWalker.RawViewWalker Field to traverse the node from the desktop Automation.RootElement.
I tried to use AutomationElement.FromPoint method to check whether i am able to get that element. Fortunately i was able to get the automation element.
i tried to get the path to root element from the node element using the TreeWalker.RawViewWalker. I was able to get the parent path to the root element.
But trying the reverse way like navigating from root element to tree node, was not getting the element for me.
Please help me with suggestions or inputs to resolve this issue.

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

Error while invoking BPEL Process through HTML Page

Hi ,
I have created a HTML Page to invoke BPEL synchronous process .
HTML Page contains :
<html>
<head>
<title>Untitled Document</title>
<h1>Add Macro Task Input Form </h1>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="cyan" text="#000000">
<form name="form1" method="get" action="/httpbinding/default/AddMacroSync/process">
EmployeeId :
<input type="text" name="EmployeeId" ><br>
<br>
TaskName :
<input type="text" name="MacroTaskName" >
<button
id="identifier"
class="dialog"
label="OK"
accesskey="t"/>
<br>
</form>
</body>
</html>
I am able to invoke my BPEL Process named as " AddMacroSync" .
It also creating instance for this BPEL Process .
But when I go BPEL Console and check my instance , it is always faulted .
I am providing two inputs : Employee Id and Taskname through HTML Page .
These inputs got assigned to their respective output variables .
But when I click on audit link ..it shows error while invoking the Process .
It Show error :
when invoking endpointAddress 'http://152.69.248.232:8990/AddMacroTask-AddMacroTask-context-root/AddMacroTaskWebService', [java.lang.NumberFormatException]
But this end point address is working when I put this address in URL .
Please someone help me how to solve this problem .
Thanks
Prashant Dwivedi
Message was edited by:
Prashant Dwivedi

Hi Clemens ,
I changed My HTML ...Now it looks like as :
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="application/x-www-form-urlencoded; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<form name="form1" method="post" action="/httpbinding/default/AddMacroSync">
<input type="hidden" name="msg_part" value="payload">
<input type="hidden" name="namespace" value="http://xmlns.oracle.com/AddMacroSync">
EmployeeId:
<input type="text" name="EmployeeId">
TaskName :
<input type="text" name="TaskName">
<input type="submit" name="Submit" value="Submit">
</form>
</body>
</html>
After this when I try to incoke my BPEL Process through this HTML :
I am gettign following error :
500 Internal Server Error
java.lang.IllegalStateException: IOException: Premature end of POST data
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindHttpServletRequest.getParameter(EvermindHttpServletRequest.java:2452)
     at com.collaxa.cube.ws.http.HttpBindingServlet.checkSecurity(HttpBindingServlet.java:281)
     at com.collaxa.cube.ws.http.HttpBindingServlet.doPost(HttpBindingServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)

FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Html pages in abap

Similar Messages

Maybe you are looking for