HTML5 plays in IE but not Chrome

This is the first time I've had this problem, but it might be just my PC whatever.
http://hissign.com/newdevelopment/deaf-community.html
Video on above page plays fine in IE but surprisingly not Chrome as I've never had this issue in Chrome before.
Can someone tell me if it doesn't play in their Chrome too or if it does?
Code I used is right here:
<video width="548" height="308" controls>
<source src="http://hissign.com/videos/deafcomm.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>

@Michael,
This might be of interest for you to read further related to HTML5 video article as featured in Adobe Inspire.
Working with HTML5 video in web project | Adobe Inspire Magazine online
http://www.adobe.com/inspire/2013/02/html5-video.html
Continue to read until you reach section "Working with HTML5 video in Muse".
HTML5 videos file is interpreted differently in Firefox, Chorme, Safari and MISE. To remedy this, you need to have a couple of movie file formats to work with those modern browsers.
Hope this helps.
Brian
BTW, are you deaf? I am. If you need some help or something, send me a private message on Adobe if you so desire.

Similar Messages

How can I move movies from my computer to my iPad? They will play in quicktime but not iTunes

How can I move movies from my computer to my iPad? They will play with quicktime but not iTunes so I can't sync them

Th AVPlayerHD works well for playing other video types. You can transfer the videos via USB in the app tab in iTunes on your computer. When you open that tab when you have you iPad connected to the computer scroll down and you will see apps listed on the left and a blank on the right. Click on the app and then click on the add button under the blank window on the right. Then navigate to the video you want to play and it will transfer it to the iPad. I have about 14 movies on mine using AVPlayerHD. works very well. Also have VLC player (before it was yanked from the app store). Works about the same.
You can also get the app Air Video and stream the video to from your computer to the iPad, and even have Theo ad connected to the tv to watch on there. I do that all the time with my iPhone. Saves time with not having to sync movies all the time.

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable it to save mp3 files on my computer?

I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?

Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.

ITunes purchased song plays in iTunes but not on iPod

I have purchased several songs from the music store. One of the songs will play in iTunes but not on my iPod. I've removed the song several times from the iPod and resynced with iTunes, but the song still cuts out in the middle of the song. What should I do?

If it's just a problem with that song, I would contact the customer service who may authorize another download.
http://www.apple.com/support/itunes/store/download/#form

Music video plays in itunes but not on ipod

hi
like my subject line states, i transferred a whole bunch of music videos off of dvd into mp4 format using videora.
they play in itunes but not on my ipod.
i transferred about 400 or so at the same time to ipod do you think that's why most of them won't play ?
should i do it one by one ?
thanks.

it's more than just the mp4 format. They need to be encoded correctly with the right dimensions and other attributes as well. I don't bother with this sort of thing right now. If there is anyone who has these specs, just post them here. Otherwise, you can always google them or search these boards for the proper format/size/encoding.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hi i am putting photos in my project it will play the videos but not the photos never had a problem before

hi i am putting photos in my project it will play the videos but not the photos i have not had a problem with this before

If you haven't tried re syncing the apps using iTunes..
Connect the iPad to your computer. Select it under Devices left side of the iTunes window. Select Apps from the menu, make sure the boxes next to those apps are selected then click the Sync button bottom right side of the iTunes window.

I've tried everything I can think of to get my Iphone 4S to play albums like an Ipod does. All it ever does is play the songs but not the albums in alphabetical order. I used to think I was reasonably intelligent until I butted heads with this phone.

I've tried everything I can think of to get my Iphone 4S to play albums like an Ipod does. All it ever does is play the songs but not the albums in alphabetical order. I used to think I was reasonably intelligent until I butted heads with this phone.

Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

Why does CD burned as "audio" only play in computers but not car?

I've done all the troubleshooting steps but to no avail. My CDs burned from iTunes play in computers but not in cars. Help!

Some car stereos can't handle anything other than commercially pressed CDs. I find that burned CDs have a limited playable lifespan for my car and have been told by my dealership that the stereo is not rated to play CD-R discs (but that hasn't stopped me). There's something about the fact that home burned CDs are dye-based whereas commercially burned CDs have more of a metal layer abalated write done that makes them more reliable to read.
You might have to look into replacing your stereo with one that can handle CD-Rs. Crutchfield is a good place to research them and the included install kits are great.

I can see other accounts on home share and play the songs, but not drag them to my account. Home share is on "on" on both accounts and both computers are authorized. What can I do to copy the song from account to account?

I can see other accounts on home share and play the songs, but not drag them to my account. Home share is on "on" on both accounts and both computers are authorized. What can I do to copy the song from account to account?

okasy if you want to move the music from the other comptuer into your comptuer you can > but if they were purchased with a different APPLE id then you need to authorize the comptuer to play them .
http://support.apple.com/kb/HT4527
click homesharing > shows how to move the song onto your comptuer

YouTube videos are all silent, on Firefox and Safari, but not Chrome

I'm baffled by this. It used to work fine and I'm not sure what changed but a month or so ago, suddenly all videos on YouTube are silent.
--The videos are silent on Safari and Firefox, but I can hear them on Chrome
--This only happens on my profile (the main profile)...my daughter's profile on this same MacBook doesn't have the problem
--Videos from Vimeo.com play just fine.
I've removed Flash and then updated my Flash player to the latest version, 11.6.602.180
I've tried deleting my YouTube.com cookie in Safari.
I can't figure out what would make videos silent in this specific set of circumstances but not others, so any help or suggestions you could provide would be appreciated.

BTW I've looked similar threads on here, and have some additional info:
--Video on cnn.com works fine.
--I am not on the HTML5 trial according to this http://www.youtube.com/html5
--I have not tried Vertical Forest yet as I'm unsure if it will help http://www.verticalforest.com/youtube5-extension/
--I haven't tried resetting Safari yet. I have this problem in Firefox too.

Embedded Video Plays on PCs but Not Macs

As the King of Siam declared, "It's a puzzlement."
I'm updating a site and have embedded a .mov from the client's YouTube channel using YouTube's preferred <iframe> code. Here is the URL: http://www.realcosmetics.com/ourStory.html.
The video will play in all of the browsers on my Win7 PC (latest Firefox, Safari, Chrome, Opera, and IE which also emulates IE7 & IE8). It will also play on the PCs of friends I've asked to test. It will not play from the page on any Macs where we've tested. [FYI, the .mov file was edited on a Mac and plays there.]
It will play on the Macs, however, from the YouTube channel. And the guy who is building the Facebook page embedded the same video on a tab using the old YouTube <object><embed> code. The test Macs have no problem playing the video from the FB page.
So, I tried switching to the old <object><embed>. Still doesn't play on the Macs, so I restored the iframe code.
What is totally confusing is that I recently embedded videos from YouTube into another site using YouTube's <iframe> code, and the client can play those on the Macs. Both pages use the same DOCTYPE (XHTML 1.0 Transitional) and code copied from YouTube. The page validates (after I removed the allowfullscreen switch which W3C said wasn't valid under the DOCTYPE).
I've searched online through forums and discussion threads for solutions, and while I found several that seemed to work for one person but not another (having to do with changing Mac preferences, etc.), none of those solutions worked on the test Macs.
Any ideas from you wonderful gurus? The answer may be staring me in the face but can't see it for having stared at it for so long. The only difference between this application and the previous one that I can think of is that the host servers are not the same company.
Thanks for pondering this!
Chris

Adninjastrator,
My advice was on the back of testing in Firebug - it was there I saw the .text div overlapping the Video. The video will become 'active' if I remove the float from #rcsVideo, however there are other floats and positioning that aren't helping anything.
To clarify, I can't get the play button to change when I hover over it (and I can't click it to play it) until I disable the float on #rcsVideo. Bizarre but that's what happens - in both FF and Chrome. No idea why this works in Windows machines without disabling the float. As you can see in the images attached, .text highlights the entire video area. Then, by disabling float:left on #rcsVideo, the text area is not covering the video.
The video itself is direct from youtube and has a flash fallback as well as many other kinds of fallback for all machines. As such, this displays in my iPad.

How to get audio clips to play at site but not actually download?

Would like person to be able to listen only to audio clips but not to be able to download clip to add to their iTunes library. In other words, am selling an audio product, and while I'd like people to be able to hear samples at my site (built with iweb), I don't want them to retain clip. Any suggestions on how to accomplish this would be much appreciated!

Stopping people from downloading anything that's published to the internet is virtually impossible.
I would recommend that you first edit your files so that you only have about a one minute clip online....
http://www.iwebformusicians.com/AudioFiles/Import.html
Dragging you files onto the iWeb page is not the best way to present them as a large percentage of PC users won't be able to play them. The Wordpress standalone flash player is still about the best way to play audio and you have to know how to get into the source code to be able to download the files....
http://www.iwebformusicians.com/MusicPlayers/FlashPlayers.html
Or use a flash jukebox....
http://www.iwebformusicians.com/Website-Music-Movies/Flash-Audio-Jukebox.html
For the increasing number of people using iPhone/iPad you can use this dual player....
http://www.iwebformusicians.com/Website-Music-Movies/Wordpress-Flash-HTML5-Audio .html
or have an alternative page using HTML5 players.....
http://www.iwebformusicians.com/Website-Music-Movies/HTML5-Audio-Player.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Plays & lights work but NOT recognized by Windows/iTunes & won't charge

It's a shuffle 512mb from a few months back and worked perfectly until last week. It continued to play as usual, but is no longer recognized when i plug it into ANY computer (i've tried about a half dozen)! I've followed every suggestion and recommendation from both the Apple Support and the discussion groups relating to my problem though it seems no one has experienced my specific ordeal. I am quite limited as it is not recognized by Windows. I tried searching for it as a "media device" but nothing. All the fucntions and lights work while playing, but there is absolutely no response when connected to a PC. When this charge goes, i'll be without my tunes!
Any help...
Thanks
Shuffle 512mb Windows XP Pro

AppleNEve wrote:
I double checked to make sure that the cable is not faulty and it's working perfectly.
how did you test that ?
anyhoo, you might want to give this a shot:
+Hi, All,+
+It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
+Restart the device without connecting to your pc and+
+Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
+Best of luck.+
here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
JGG

HTML5 plays in IE but not Chrome

Similar Messages

Maybe you are looking for