Htmlb:tableView Recover the selected row

Hi.
How can I recover the selected row in a internal table, with the htmlb:tableView, in the onInputProcessing?
Thanks very much!
I'm using this sentence in the "layout":

 <htmlb:tableView id = "myTableView"
 visibleRowCount = "<%= c_ver_registros %>"
 width = "<%= c_ancho_tabla %>"
 selectionMode = "SINGLESELECT"
 table = "<%= T_TABLA %>" >
 </htmlb:tableView>
null

hi Marcos,
 While calling the Tableview in the layout get the selected row index in the attribute selectedRowIndex = "<%= var_selectedindex %>" { where var_selectedindex should be defined as a pageattribute} the tableview definition should be like this..
<htmlb:tableView id = "myTableView"
visibleRowCount = "<%= c_ver_registros %>"
width = "<%= c_ancho_tabla %>"
selectionMode = "SINGLESELECT"
selectedRowIndex = "<%= var_selectedindex %>"
table = "<%= T_TABLA %>" >
</htmlb:tableView>
And in the inputprocessing ,
Try this code..
IF htmlb_event IS NOT INITIAL AND htmlb_event->if_htmlb_data~event_name = 'tableView' AND
 ( htmlb_event->if_htmlb_data~event_type = 'cellClick' OR
 htmlb_event->if_htmlb_data~event_type = 'rowSelection' OR
 htmlb_event->if_htmlb_data~event_type = 'navigate' ) .
 DATA tableview_event TYPE REF TO cl_htmlb_event_tableview.
 tableview_event ?= htmlb_event.
 IF lr_tableview_event->selectedrowindex IS NOT INITIAL .
 var_selectedindex = tableview_event->selectedrowindex.
 ENDIF.
ENDIF.
regards,
Bhanu.

Similar Messages

Error in receiving tableview data for selected row

Hi Collegues ,
We plan to realize an application for the maintanance of planning data . In the first step we created a value help page by using a tableview with iterator class ( 1 of the 3 methods of the Interface was filled with logic ) . We don't use any controller for that application .
A global internal table with the relevant help value data ( fgrvalues ) is used for the tableview and the call is :
TYPE I .
+CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
CLEAR ONCLICKEVENT.
IF EVENT_ID = CL_HTMLB_MANAGER=>EVENT_ID.
 EVENT_DATA = CL_HTMLB_MANAGER=>GET_EVENT( REQUEST ).
 IF ( EVENT_DATA IS NOT INITIAL ) AND
 ( EVENT_DATA->EVENT_TYPE = 'click' ) .
 ONCLICKEVENT = EVENT_DATA->SERVER_EVENT .
 ENDIF.
ENDIF.+
CASE ONCLICKEVENT.
WHEN 'take' .
 TABLE ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST = REQUEST
 NAME = 'tableView'
 ID = 'fgr1_vhelp' ) .
 TABLE_EVENT = TABLE->DATA.
 IF TABLE_EVENT->SELECTEDROWINDEX IS NOT INITIAL.
 ROWSELECTION = TABLE_EVENT->SELECTEDROWINDEX.
-> ROWSELECTION - Content is now the index of the selected tableview row
We always get the selected row in TABLE_EVENT->SELECTEDROWINDEX and the table TABLE_EVENT->ALLCOLUMNNAMES filled ( column ZX_FGR1 is the 2nd column )
but we never got the tableview data for that tableview row no matter what we tried . We tried it with a tableview-event fired on 'rowselection' by user line-selection . We have deactivated the iterator or changed the BPS design value . With the same result - nothing was given back .
We found that the System-Call Return value of :
+system-call ict
did
ihttp_scid_get_form_field
parameters
m_c_msg " > c handle
name " > form field name value " < form field value
 m_last_error. " < return code+
in the method IF_HTTP_ENTITY~GET_FORM_FIELD is empty . M_LAST_ERROR occurs with value '20' .
+ ASSIGN ROWSELECTION TO .
COLUMN_VALUE = TABLE_EVENT->GET_CELL_VALUE( ROW_INDEX =
COLUMN_INDEX = '2' ). -> Column Value is empty !!+
 +CALL METHOD TABLE_EVENT->GET_CELL_VALUE
 EXPORTING
 ROW_INDEX = TABLE_EVENT->SELECTEDROWINDEX
 COLUMN_INDEX = '2'
 RECEIVING
 VALUE = COLUMN_VALUE -> Column Value is empty !!+
 +CALL METHOD TABLE_EVENT->GET_SIMPLE_DATA ....
 -> Column Value is empty !!+ *----
What could be the reason for that problem ? In generally it must be possible somehow to read the tableview data for one or all rows of the mentioned tableview .
We hope that someone can help and are very thankful for a hint or solution . If you need more details please let us know .
Please Remark: It's no solution for us to read the data by using the created internal table fgrvalues and the selectedrowindex cause in a later step we plan to update an ODS table with the manual modified planning data of an editable tableview .
Thanks a lot in advance
Dirk Läufer

Hi collegues ,
It's done .
After we've got a very helpful little hint from Brian :
The <htmlb:tableView> renders a table to the browser. It does not keep a copy of the table. The browser will also never return the table. Never. What it can return are inputfields for each cell. But then only if each cell is custom rendered as an inputfield.
we could certainly solve the problem .
We set the field we want to get back from table view on not editable inputfield via the tableview-iterator method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START :
DATA: LCL_TABLE TYPE REF TO CL_BSP_BEE_TABLE ,
 LCL_INPUTFIELD2 TYPE REF TO CL_HTMLB_INPUTFIELD .
CASE P_COLUMN_KEY .
WHEN 'ZX_FGR1'.
* Field Firm Group
 CREATE OBJECT LCL_INPUTFIELD2.
 LCL_INPUTFIELD2->ID = P_CELL_ID.
 LCL_INPUTFIELD2->WIDTH = '100%'.
 LCL_INPUTFIELD2->MAXLENGTH = 4.
 LCL_INPUTFIELD2->TYPE = 'STRING'.
 LCL_INPUTFIELD2->DESIGN = 'STANDARD'.
 LCL_INPUTFIELD2->DISABLED = 'TRUE'.
 LCL_INPUTFIELD2->VALUE =
 GET_COLUMN_VALUE( COLUMN_NAME = 'ZX_FGR1').
 P_REPLACEMENT_BEE = LCL_INPUTFIELD2 .
Now the method in OnInputPorcessing:
TRY.
 CALL METHOD CL_HTMLB_MANAGER=>GET_SIMPLE_DATA
 EXPORTING
 REQUEST = RUNTIME->SERVER->REQUEST
 ID = 'fgr1_vhelp'
 ROW_IDX = TABLE_EVENT->SELECTEDROWINDEX
 COL_NAME = 'ZX_FGR1'
 CHANGING
 DATA = FGRVALUES_LINE-ZX_FGR1 .
 IF NOT FGRVALUES_LINE-ZX_FGR1 IS INITIAL.
* selektierte Firmengruppe übernehmen
 ZX_FGR1 = FGRVALUES_LINE-ZX_FGR1 .
 CALL METHOD NAVIGATION->SET_PARAMETER
 EXPORTING NAME = 'ZX_FGR1'
 VALUE = ZX_FGR1.
 ENDIF.
 CATCH CX_SY_CONVERSION_ERROR .
 ENDTRY.
works properly as it should be ...
An enormous Thanksgiving to you , Brian !!!!

How to save the selected row number to NSUserDefaults

I am trying to save the indexpath.row of the selected row to NSUserDefaults temporarily until my detail view controller can load its UITextFields based on which row is tapped. First of all is this good? I chose this design because the detail view controller cannot access the master view controller so I can't find out which row its tapped. To save to NSUSerDefaults, I did the following code, and the NSLog is always returning row 0 no matter what row I tap. Plus the title is not being set: its still blank.
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    [patientList deselectRowAtIndexPath:indexPath animated:YES];
    [[NSUserDefaults standardUserDefaults] setInteger:indexPath.row forKey:@"rowSelected"];
    NSLog(@"The selected row saved is row %d"), [[NSUserDefaults standardUserDefaults] integerForKey:@"rowSelected"];
    if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPhone) {
        PatientDetailViewController *detailViewController = [[PatientDetailViewController alloc] initWithNibName:@"PatientDetailViewController" bundle:nil];
        detailViewController.title = [patientDisplayName objectAtIndex:[[NSUserDefaults standardUserDefaults] integerForKey:@"rowSelected"]];
        // Pass the selected object to the new view controller.
        [self.navigationController pushViewController:detailViewController animated:YES];
        [detailViewController release];

I have also tried setting the title differently (I also added comments to explain each line what it does, the rest is the same), but neither methods work
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    // Deselect the row
    [patientList deselectRowAtIndexPath:indexPath animated:YES];
    // Save to memory the row selected
    [[NSUserDefaults standardUserDefaults] setInteger:indexPath.row forKey:@"rowSelected"];
    // Show saved row to make sure it saved correctly
    NSLog(@"The selected row saved is row %d"), [[NSUserDefaults standardUserDefaults] integerForKey:@"rowSelected"];
    // Check if user is using iPhone
    if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPhone) {
        // Load the view
        PatientDetailViewController *detailViewController = [[PatientDetailViewController alloc] initWithNibName:@"PatientDetailViewController" bundle:nil];
        // Set the title of the detail view controller based on row selected
        detailViewController.title = [patientDisplayName objectAtIndex:indexPath.row];
        // Push the detail view controller
        [self.navigationController pushViewController:detailViewController animated:YES];
        // Release the detail view controller
        [detailViewController release];

After upgrading to CF10, the selected row of my cfgrid is no longer passed on form post.

I have a cfform which contains a cfgrid and prior to the 9 to 10 update, upon submission of the cfform, the selected row of the grid was passed/posted to my form action page as:
__CFGRID__gridForm__renewalGrid
This contained all the data from the selected row, I.e.:
__CFGRID__COLUMN__=PROJECTID; __CFGRID__DATA__=T01081002AP; __CFGRID__COLUMN__=APPLICATIONS; __CFGRID__DATA__=PQFD; __CFGRID__COLUMN__=OWNERUID; __CFGRID__DATA__=HT2008; __CFGRID__COLUMN__=TEAM; __CFGRID__DATA__=Roberts; __CFGRID__COLUMN__=ROLE; __CFGRID__DATA__=AASBOAPMX; __CFGRID__COLUMN__=REGION; __CFGRID__DATA__=Southwest; __CFGRID__COLUMN__=EXISTING; __CFGRID__DATA__=K8045F; __CFGRID__COLUMN__=SOD; __CFGRID__DATA__=0; __CFGRID__COLUMN__=INITIALEMAILDATE; __CFGRID__DATA__=01/28/2013; __CFGRID__COLUMN__=MESSAGEDATE; __CFGRID__DATA__=; __CFGRID__COLUMN__=SECONDEMAILDATE; __CFGRID__DATA__=; __CFGRID__COLUMN__=ESCALATIONDATE; __CFGRID__DATA__=; __CFGRID__COLUMN__=COMPLETEDBY; __CFGRID__DATA__=TH2878; __CFGRID__COLUMN__=COMPLETIONDATE; __CFGRID__DATA__=02/06/2013; __CFGRID__COLUMN__=MONTHPULLED; __CFGRID__DATA__=Jan2013; __CFGRID__COLUMN__=TOTALITEMS; __CFGRID__DATA__=2; __CFGRID__COLUMN__=RELIEVINGPSA; __CFGRID__DATA__=; __CFGRID__COLUMN__=MODIFIEDBYTS; __CFGRID__DATA__=02/06/2013; __CFGRID__COLUMN__=MODIFIEDBY; __CFGRID__DATA__=T228Y8; __CFGRID__COLUMN__=CREATEDBY; __CFGRID__DATA__=KV3M36; __CFGRID__COLUMN__=CREATEDTS; __CFGRID__DATA__=01/28/2013; __CFGRID__COLUMN__=NEWSA; __CFGRID__DATA__=; __CFGRID__COLUMN__=DELEGATESTATUSNOTE; __CFGRID__DATA__=Access; __CFGRID__COLUMN__=STATUS; __CFGRID__DATA__=Completed; __CFGRID__COLUMN__=DATATYPE; __CFGRID__DATA__=Appl New
After upgrading to CF10, and with no changes to the code, performing this same process, __CFGRID__gridForm__renewalGrid is still passed in the form scope to my action page, but now it is empty.
I have not yet uninstalled CF9, so I brought it up on a different port, and I can run the same code as CF9 or CF10 and watch... in 9 the selected row is passed, in 10 it is empty.
Is this a bug? Is there a work around? Please help.

appears that apple has changed SMB code, and now its not possible login from windows on mac.
i installed snow leopard and now works fine.
apple is capable to make it run paying new license of smb code, but isnted of this, apple has created new protocol smbx and now, all others need to adapt your code to apple..
bad movement.. i am thinking sell imac and no back to apple anymore..

How do I set only the first row of a DataGrid as the selected row?

I have a "Go" button on a search form that fetches data into an already data bound grid. After the data is fetched, I want to make the first row in the Datagrid the selected row, as if the user clicked on it. If the result set is empty, I don't want the code to crash. (I only want one row to be able to be selected at a time)
            protected function btnGo_clickHandler(event:MouseEvent):void
                getSBJsResult.token = baa_data_svc.getSBJs(cmbSrch.text);
                grdSBJs. // ????? What goes here to select the first row?

This should do it.
If this post answered your question or helped, please mark it as such.
if(myDataGrid.dataProvider.length > 0){
myDataGrid.selectedIndex = 0;

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

How to change the default color of the selected row

hi all,
I need to know how to change the default color(yellow) of the selected row in a table component.whether i need to change anything in the stylesheet.If so, where should i make the changes in the stylesheet.
thanks and regards,
rpk

The chart colors are being referred to *'palette.cxml'* file in these directories
BI_HOME\web\app\res\s_oracle10\chartsupport
BI_HOME\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\chartsupport
you can change to your custom colors.
Restart OC4J and PS to make the new ones work..
Regards,
Raghu

[UIX-ADF] How to get the selected row in my ViewObjImpl.java

Hi,
I have a uix table with a select column. I dragged my method from my ViewObjImpl
and dropped it on the select column (radiobutton) as a submitbutton.
If I run my application and select a row and press my button it always reads the first
row. Why?
I also tried including a param in my method, for the record id, but I dont know what to
pass to my action binding as a param, where can I find the selected row?
This is what I want, my method in ViewObjImpl.java
public void doDelete() {
ViewObjRowImpl pRow = (ViewObjRowImpl)this.getCurrentRow();
try {
    pRow.setIsDeleted("Y");
    //this.executeQuery();
    this.getDBTransaction().commitAndSaveChangeSet();
    //this.validate();
} catch(Exception e) { System.out.println("ERROR doDelete" + e); }
}It should set the IsDeleted field to 'Y' for the selected row. Perhaps im not doing the
right thing for this?
Can anyone give me some pointers?
Thanks in advance
Ido

Thanks. So even if you select a row and then press the button, your method still only finds the first row?!
Are you sure that the selection mechanism of your table is working? Your tableSelection fires a select event and your page contains a select handler?
When you wire your page using drag and drop the binding should always use the default iterator of the ViewObject. And getCurrentRow() should always give you the current row of that iterator. So my feeling is that the selection doesn't take place.
Or could it be that something resets the currency in the ViewObject from another place?
Sascha

To capture the selected rows along with edited field contents in alv report

Dear All,
         I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
         For example If there are 10 records displayed in the alv output with 20 fields.
Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
      I am using the Func Module 'REUSE_ALV_GRID_DISPLAY'.
      Your early reply with sample code would be appreciated.
Thanks in Advance.

HI Naveen ,
There is an import parameter "i_callback_program" in the function module,
plz pass the program name to it.
Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ". Check the returned command and
and program a functionality as desired.
u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
In case it is , process the code segment.
Regards
Pankaj

How to delete the selected rows with a condition in alv

dear all,
i am using the code in object oriented alv.
WHEN 'DEL'.
PERFORM delete_rows.
FORM delete_rows.
DATA : lv_rows LIKE lvc_s_row.
data : wa_ROWs like LVC_S_ROW.
FREE : gt_rows.
CALL METHOD alv_grid->get_selected_rows
IMPORTING
et_index_rows = gt_rows.
IF gt_rows[] IS INITIAL.
MESSAGE s000 WITH text-046.
EXIT.
ENDIF.
loop at gt_rows into wa_ROWs .
if sy-tabix ne 1.
wa_ROWs-INDEX = wa_ROWs-INDEX - ( sy-tabix - 1 ).
endif.
delete gt_sim INDEX wa_ROWs-INDEX .
endloop.
the rows to be deleted from int.tab gt_sim not in the alv display.
all the rows should not be deleted if one of the field in gt_sim eq 'R'.
how to check this condition

dear jayanthi,
ok if i am coding like that as u mentioned ,
it will exit the loop when first time the field value is 'R'.
if any of the selected rows contains field value 'R'. it shold not delete all the selected rows.
as u suggested it will not delete after first time the field value is r.
i am deleting it by tab index so,
suppose if i am selecting the row without field value R say its tabix is 1.
the next row with tabix 2 with field value R.
it deletes the first row and exits , it should not delete the first row also.

How to delete the selected rows in a JTable on pressing a button?

How to delete the selected rows in a JTable on pressing a button?

You are right. I did the same.
Following is the code where some of them might find it useful in future.
jTable1.selectAll();
int[] array = jTable1.getSelectedRows();
for(int i=array.length-1;i>=0;i--)
DefaultTableModel model = (DefaultTableModel)jTable1.getModel();
model.removeRow(i);
}

Check box als column in a standard table, how to get the selected row

Dear experts,
I habe standard tablt with check box as column. Now I want to get the current selected row structure and do some changes. How could I solve this problem? till now I just know to get the structure via lead selection.
lo_node->get_element().
lo_element = lo_node->get_static_attributes ( static_attributes = ls_row).
How could I get the element through check-box in stead of lead selection. Many thanks!

check this code
To get the selected row number
data: lr_element type ref to if_wd_context_element,
lv_index type i.
lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
lv_index = lr_element->get_index( ).
Thanks
Bala Duvvuri

How to delete or remove the selected row in a table

Dear Experts,
I'm facing a typical requirement in VC, similiar to variable selection screen in BI Queries :
I will have two tabes and if the user selects data from one table it will be moved to target table.I'm able to populate the target table with the value but I'm not able to delete the selected row from the source table.
Any help in this regard would be highlt appreciated.
Thankx in advance.
Regds,
Srinivasan.

Hi
Follow the following steps -
1. Create two buttons.One for 'delete row' and another one for 'insert row'.
2. Assign the proper system action as per the name.
2. Change the name of both buttons as common name.
3. To trigger the actions simultaneously add a star before the action.( For Example : *select)
4. Change the visibility of any one of the button as 'false'. (so it will not get displayed)
5. Now, if u click the visible button both actions will be triggered simultaneously.
Regards
Sandeep

How to Highlight the selected row of table

Hi All,
I have a result table. I want the selected row to be highlighted in orange color.
The properties of the table are as follows :
rowSelectable : true
selectionChangeBehaviour : auto
selectionMode : auto
Please let me know what am I missing.
Nikhil

Hi Nikhil,
We too encountered this problem in EP 6.0. The code is correct. Actually
int index=wdContext.nodeSales_Orders1().getLeadSelection();
is enough.
But this is not the problem. It is the problem with either browser or Portal Runtime.
Is your version EP 6.0? Is this a problem for all tables or only this table? Check with other browsers like Mozilla..(or different IE versions).
regards,
Siva

How to get the selected rows in a table

Hi,
How to get the ids of all the selected rows. On Page load a query is executed that shows the data in a table with a checkbox in the first column to select the rows and delete. Now if a user select multiple rows how do I get the ids of selected rows in the backend code.
Thanks

Please search the forum before posting questions.
refer following thread for table selection.
Re: Record selection with MessageCheckBox and print the selected record.
--Prasanna

Htmlb:tableView Recover the selected row

Similar Messages

Maybe you are looking for