HtmlText is Input rather than dynamic

I have a standard text field which is set (using the
properties window) to 'Dynamic Text'.
I have the following code to set the text...
eval("_root.thead"+i).htmlText = tmp;
When I view the program the text field is Input, and not
dynamic!
I have tried including the line ...
eval("_root.thead"+i).type = "dynamic"
... but this has no effect.
Is this a bug or am I missing something obvious?
I am programming in Flash 8 and viewing in a web page using
Flash Player 10.

input textfields are dynamic textfields with additional capabilities.
what's trace(eval("_root.thead"+i)) reveal?

Similar Messages

Using User Input Rather Than "strStartFolder".

Hi guys!
This script is very simple but it's part of a project I've been working on for some time now. Any VBS guru (or novice for that matter) will be able to tell what it does after a brief scan of the code. Again, like I said, this is a very simple
script.
For newcomers, this script siimply looks for duplicate files in a folder on one or more of your drives.
However, I'm having 2 issues...
First, I need to change the script to where the Wscript engine is used to ask for user input via an InputBox and for that data to be read into a variable which could be "strStartFolder"? If
not, any variable will do, but having to enter in location you wish to search by editing the script manually is not practical.
strStartFolder instead of someone having to edit the code manually each time and enter the path to the folder you wish to scan. In this example, I have last scanned the "Largest Vidz Appz and Musik Folder" on drive H:\. I did this manually
of course...
I have played with this using several methods which all only seemed to work "partially".
The second issue I am having is that you cannot scan just a drive. It MUST be a folder. If you input, for example, "H:\" you will receive an error stating that either permission has been denied or the path cannot be found.
Still being somewhat of a noob myself when it comes to scripting I'm sure there is some simple parameter I can/could have entered to fix this but I tried, "H:\*", H:\*\", H:\*.xxx"\ (.xxx being the extension of course) and other things).
Nothing seems to work but I believe that is because of who the original VBS was coded initially. Again, this is why I come to the greatest resource on the net.
One more thing, when all is said and done the script should ask for a user's input via Wscript so that an InputBox greets them with a message such as, "Please enter the location you wish to scan for duplicates:". And then, depending on their
answer (being of correct syntax, etc, etc) the script runs and outputs a file named "dups.txt" using the Cscript engine.
Please note that I have been running the script as follows to allow for output to a text document. "C:\cscript //nologo FindDuplicates.vbs > duplicates.txt", I would like to avoid having to do this as well if possible but it's ok if not.
Running this script by "double clicking" can be a disaster if you have tons of duplicate files. So asking for user input is the only area where Wscript need be used. But hey, this is why I'm here. For guidance...
This is cake for most of you so I will be interested in seeing the different ways you all come up with resolving this issue.
Anyway, here is the script! Thanks in advance for your help!
Dave
Set objDictionary = CreateObject("Scripting.Dictionary")
Set objFSO = CreateObject("Scripting.FileSystemObject")
strStartFolder = "H:\Largest Vidz, Appz and Musik Folder"
Set objFolder = objFSO.GetFolder(strStartFolder)
Set colFiles = objFolder.Files
For Each objFile in colFiles
strName = objFile.Name
strPath = objFile.Path
If Not objDictionary.Exists(strName) Then
objDictionary.Add strName, strPath
Else
objDictionary.Item(strName) = objDictionary.Item(strName) & ";" & strPath
End If
Next
ShowSubfolders objFSO.GetFolder(strStartFolder)
For Each strKey in objDictionary.Keys
strFileName = strKey
If InStr(objDictionary.Item(strFileName), ";") Then
arrPaths = Split(objDictionary.Item(strFileName), ";")
Wscript.Echo strFileName
For Each strFilePath in arrPaths
Wscript.Echo strFilePath
Next
Wscript.Echo
End If
Next
Sub ShowSubFolders(Folder)
For Each Subfolder in Folder.SubFolders
Set objFolder = objFSO.GetFolder(Subfolder.Path)
Set colFiles = objFolder.Files
For Each objFile in colFiles
strName = objFile.Name
strPath = objFile.Path
If Not objDictionary.Exists(strName) Then
objDictionary.Add strName, strPath
Else
objDictionary.Item(strName) = objDictionary.Item(strName) & ";" & strPath
End If
Next
ShowSubFolders Subfolder
Next
End Sub
Again, thank you in advance for your help.. And why is some of my text here in this post showing in smaller font than other text? It seems to be dependent on the line you type on? This is,
of course, not the problem I came here to resolve, I am only curious. ;-)
DB
PAinguIN

Thank you for your response!
So if I used the "MyMessage" variable after the "=" in the line below then the users input should be the folder that is searched as long as your lines are added before this line correct?
Thanks again!
DB
strStartFolder = "H:\Largest Vidz, Appz and Musik Folder"
PAinguIN

ADF input form, changing mode to input rather than display

aim of what i am tring to do:
create an input form using ADF and UIX which accepts input and moves to a different page.
approach taken:
I have a data control based on a business component created from a database table. I have dragged the columns onto a UIX page as an input form without navigation.
the problem/question:
how do i set the data controls mode to create upon displaying the page? I want the page just to accept input and submit. it will never be used for displaying data, which is its current default state.
i have tried calling the create method of the data control from a few places, but i am not sure where the correct place to call this is.

You can create a dataaction before the page is called and drag the Create method on to it.
Or you can add the create method as a button to the page that will end up calling your insert page.
http://www.oracle.com/technology/obe/obe9051jdev/ADFWorkshop/BuildingADFApplicationsWorkshop.htm

Can I create absolute cell values in a formula (rather than dynamic ones)?

A lot of the time I appreciate the fact that the target cells move when I copy/paste a formula from one spot to another, but there are certain instances when I want the target cell in the formula to be absolute (e.g. G2). Just wondering if there was a way to do this. Thank for any help or guidance you might be able to offer.

kwalter,
You may download the Numbers User Guide from a link in the Help menu. On page 126 there's a nice explanation of relative and absolute cell address referencing under the section title: "Distinguishing Absolute and Relative Cell References"
That's the page number for the English edition. Yours may vary.
Jerry

Dynamic User,Role,Group rather than use jazn.xml

Hi everyone
For Jdev 11..
can anybody tell me how to make application wich can make user,group,role dynamically...
rather than use jazn.xml...
I thought if i use jazn.xml for register user and group its very static...
I cannot make it dinamycally....
I read OPSS and I cannot found the idea behind it...
thanks...

Hi,
You can achieve this by using a sql authentication provider. It gets the users and their roles & credentials from the db tables which you can configure in WLS. In JSF, you can create a creation form based on the table (which you configured for authentication), which can be used for the users to register.
Check out this doc for more information.
Regards,
Arun

Possible to display domain value range descriptions rather than values?

Hi All,
We're using ECC6.
I have a context input field on my view, which is bound to a data type that is bound to a domain. The values are brought back from the domain automatically but when the user selects a row, the fixed value is displayed rather than the description, i.e. the code for the value is displayed rather than the short description.
This is not acceptable. Before I go off and code something for this instead is there a parameter I can set to tell it to display the description rather than the code.
Many thanks,
Liz.

HI Liz,
You can read the domain name i guess, then you can use the Function Module DD_DOMVALUES_GET, make the call as
CALL FUNCTION 'DD_DOMVALUES_GET'
       EXPORTING
            domname        = i_dom_name
            text           = 'X'
            langu          = sy-langu
       IMPORTING
            rc             = lv_rc
       TABLES
            dd07v_tab      = t_dd07v
       EXCEPTIONS
            wrong_textflag = 1
            OTHERS         = 2.
you should get the short description in the field ddtext of result t_dd07v.
Now instead of creating a domain you can provide these values to the valid values for your context dynamically.
Hope this helps.
Regards
Vineet

ICal To Do List appearsin iPod alphabetical rather than due date as in iCal

I have iCal 2.0.3 on my G4 iBook running OS 10.4.7. When I synch to my 20 GB iPod v1.2.1 via iTunes 6.0.5, my To Do list appears in alphabetical order (which is obviously pretty useless), rather than "To Dos by Due Date" that they're set up as in iCal. Any advice as to how to get the To Do list to appear in order of due date, and if no due date is set, by priority? Thanks.
iBook Mac OS X (10.4.7)
iBook Mac OS X (10.4.7)

In was trying to solve another "to do list" problem when I had stumbled upon this iCal characteristic that may be your problem.
I have the habit of putting together my "to do list" before dragging my "to do's" over to my calendar to scheduling them as an events. I have found all of my unscheduled "to do's" do not appear on my online calendar.
But if I reverse the order in which I input my data — scheduling an event first and then dragging it to my To Do List, not only does it show up on my online calendar, but my "To Do" tells me when it is scheduled to be done.
Let me know if this helps.

Why should i use JSF rather than Struts?

What makes JSF useful than Struts? In my project I am using like
<h:commandButton action="#{loginbean.execute}" actionListener="#{loginbean.handleEvent}" ..../>
In the above commandButton as you can see that i am not exposing the beanName. However i am exposing the beanMethod which are execute and handleEvent. Is there any other way to hide the name of the method because
From what i understand is Presentation Layer should be shielded from whatever is going on in the backend. So, this doesn't do good right?
Please suggest.
How does Component and Renderers help. I am using encodeEnd() method in Renderer to render what the input or the output should look like. Do we need to switch to JSF from Struts just because of this... I don't see how and why components and renderers could help me..

srikanthradix wrote:
What makes JSF useful than Struts? In my project I am using like
<h:commandButton action="#{loginbean.execute}" actionListener="#{loginbean.handleEvent}" ..../>
In the above commandButton as you can see that i am not exposing the beanName. However i am exposing the beanMethod which are execute and handleEvent. Is there any other way to hide the name of the method because
From what i understand is Presentation Layer should be shielded from whatever is going on in the backend.You can use "binding" and define everything in Java code if you want. You can rename your method to reflect what you want to see in the front end if you want. You can use JSFTemplating to use handlers which can be mapped to any name you want to see and do not have to match the method name of the java class (although I suspect this is the opposite direction from what you are suggesting you want).
EL in jsf (i.e. #{bean.login}) is meant to do the mapping in JSF pages rather than externalize this in a separate file and force the page developer to edit multiple files for simple tasks. Although in some cases navigation is broken out into a separate file (i.e. faces-config.xml file using the default NavigationHandler navigation rules), this can also be done inline. It's a different way of doing development and has its pros and cons (easier, but mixes up presentation and controller somewhat). That said... JSF is very flexible, it CAN externalize any of this information, it just requires you to provide a different ViewHandler information that allows you to enter the data the way you like to see it (imo, you won't realize any benefit from the separation, though -- I used to think it was worth doing but have changed my opinion).
So, this doesn't do good right?Perhaps in theory... but in practice, I don't think it really has a drawback. One caveat, I like how I implemented event handling in JSFTemplating as opposed to action/actionListener attributes which are not configurable and are more opaque than I prefer. My parameterized handlers allow for better code-reuse, but arguably mix up presentation and controller code even more (depending on how they're used).
Please suggest.
How does Component and Renderers help. I am using encodeEnd() method in Renderer to render what the input or the output should look like. Do we need to switch to JSF from Struts just because of this... I don't see how and why components and renderers could help me..The idea of a component helps tremendously as someone else can create a component for you and you can benefit from it. There are many great component sets available on the market (for free and for purchase). For example: Woodstock (which has drag/drop support inside NetBeans), RichFaces, IceFaces, Tomahawk, Scales, etc.
Renderers allow you to cleanly separate the presentation of a component with the data of the component. You can then switch out the presentation to support multiple markups (i.e. client devices). In addition, JSF's rich lifecycle provide logical places for certain types of operations to occur, the renderers participate in this so that they are performing their tasks at a well defined time. And finally, many different components may re-use the same renderer, or a single component may use one of several renderers. The separation of data and display (model and view) makes this very clean.
JSF is not Struts. If you expect it to be struts, you may be disappointed (or if you expect struts to be JSF, you'll be disappointed). JSF has a lot to offer (as does struts), you have to decide what is important to you and your organization. Some things to consider wrt to JSF: very strong vendor support; many large set of components to choose from; multiple standards-based tools to choose from; very flexible (most parts of the framework are pluggable); active growing development community; component-based model which encapsulates complexity for things like Ajax, pagination, and other things (often complicated in a non-component architecture); good integration with other frameworks.
I don't know if this makes your decision any easier, but hopefully it helps clarify how you should be viewing JSF & Struts.
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

Uploading a Specific file rather than browsing

My app allows users to create a user-named jpg like so:-
var enteredimagename:String = imagenameentry.text;
var file:File = File.applicationDirectory.resolvePath(('assets/images/')+enteredimagename+('.jpg'));
However I now want to allow a user to upload that specfic file automatically to my server by clicking a button which will simply upload that file WITHOUT having them browse for it. So basically I need it set up so that when the user clicks a button whatever name they type into the imagenameentry.text will be the image that gets uploaded. For example they create an image which they name yahooimage by typing yahooimage into the imagenameentry text input component. Once a button is clicked this will save this image as assets/images/yahooimage.jpg but I want to advance this button click further so that this specific jpg is then set as the file for upload without browsing for it. All the examples I've seen use the browse function though which is not what I want.
How can this be combined with the filereference method or some other way so that the file to be uploaded can be entered into a textinput component as described above rather than browsed for?

Hi David,
go through these docs: [Doc1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71]
If you want to uplaod file on WAS then go through this doc..
[Doc2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e9392-8167-2b10-b9a8-e0aa297e88c6]
hpe it hlps
Regards
Khushboo

Launch application via run menu rather than dos...possible?

hi,
we're trying to find a way to launch a application, such as MS Word, from our java app via the run menu in start menu, rather than through dos. currently our program reads the start menu and gets the lnk file paths, the problems is that it displays them as:
C:\WIN98_SE\start menu\programs\Microsoft Word.lnk
but dos needs them as:
C:\WIN98_SE\startm~1\programs\Micros~3.lnk
so to execute it from java we would need to write it as:
Runtime.getRuntime().exec("start C:\\WIN98_SE\\startm~1\\programs\\MICROS~3.lnk");
since we're doing this dynamically we can't be sure if the user will have office professional, home, or any other version, so this means that for some micros~3 might be micros~1, not sure which number will be attached at the end. but if we are able to launch it from the run command in the start menu then typing:
C:\WIN98_SE\start menu\programs\Microsoft Word.lnk
will work.
Thanks.

You should try this:
Runtime.getRuntime().exec("command /C \"C:\\WIN98_SE\\start menu\\programs\\Microsoft Word.lnk\" "); with Win98
orRuntime.getRuntime().exec("cmd /C \"C:\\WINNT\\Documents and Settings\\user-name\\Start Menu\\Programs\\Microsoft Word.lnk\" "); with Win2000 prof.
/C - Carries out the command specified by string and then terminates
I tested only the second one because I don't have access to a win98 system.
Let me know if this solves your problem.
Regards
BG

Forcing traffic through load balancer rather than zone to zone

I have several T5140s with 2 LDOMs. Within each LDOM I have multiple zones which contain 2 environments. Each environment comprises the following, an apache instance behind a BigIP load balancer, a JBoss instance, and several misc. The jboss zone has three IP address assigned for multiple applications. Each server is configured identically as far as zone and LDOM layout. We use mod_cluster to cluster our apache and Jboss environment. What I'm trying to accomplish is forcing the apache zone's traffic through the BigIP rather than zone to zone.
Referring to the information below, server2ldom1jboss is one jboss node which needs to connect to both server2ldom1japache and server1ldom1apache. server2ldom1jboss connects to server2ldom1apache via its DNS name which is a NAT address. So webserver2 resolves to 10.10.2.5 which NATs to 10.10.1.5 behind the BigIP. webserver2 responds directly to the jboss zone rather than through the BigIP. Not good. server1ldom1apache works correctly as it's not a local zone.
Referring to this document, https://blogs.oracle.com/solarium/resource/solaris-container-guide-en-v3.1.pdf
section 5.2.7.8
"Connection of zones via external routers using the shared IP instance"
I've created the following routes
route add 10.10.2.5 10.10.1.5
route add 10.10.0.34 10.10.1.5 -interface -reject
route add 10.10.0.35 10.10.1.5 -interface -reject
route add 10.10.0.87 10.10.1.5 -interface -reject
route add 10.10.1.5 10.10.0.87 -interface -reject
route add 10.10.1.5 10.10.0.34 -interface -reject
route add 10.10.1.5 10.10.0.35 -interface -reject
This does prevent the zone to zone traffic, but it also preventing any response. I've tried other options as well, but have not been successful yet. What concerns me is this "These interfaces must not be used elsewhere in the global zone." The 5140 has 4 ethernet ports, which are configured into two port channels. vnet0 and vnet1. The apache instances use vnet1. The remaining zones use vnet0, including the global zone (server2ldom1 10.10.0.21). I think this may be the issue, but do not see an easy resolution without breaking my port channels and losing redundancy and fail-over.
If there is anything I'm missing or a better/different way to do this, I would greatly appreciate any input on this matter.
Thank you.
webserver2 10.10.2.5 NATs to 10.10.1.5
jboss apps 10.10.0.34, 10.10.0.35, 10.10.0.87
10.10.0.0/24 is the lan
10.10.1.0/24 is the network behind the BigIP
10.10.2.0/24 is the webserver network (in front of the BigIP)
[1658]root@server2:~# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 2G 1.1% 138d 5h
MAC
00:14:4f:ec:20:ff
HOSTID
0x84ec20b8
VCPU
VID PID UTIL STRAND
0 0 2.0% 100%
1 1 1.4% 100%
2 2 0.7% 100%
3 3 2.1% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3, 4, 5, 6, 7)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
boot-device=/pci@0/pci@0/pci@2/scsi@0/disk@0,0:a disk net
keyboard-layout=US-English
nvramrc=devalias rootdisk /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a devalias rootmirror /pci@0/pci@0/pci@2/scsi@0/disk@1,0:a
security-mode=none
security-password=
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
pci@0 pci
niu@80 niu
VCC
NAME PORT-RANGE
primary-vcc0 5000-5010
CLIENT PORT
group1@primary-vcc0 5000
group1@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw0 00:14:4f:f9:ff:ff aggr1 switch@0 1 1
PEER MAC PVID VID
vnet0@ldom2 00:14:4f:fb:7b:ff 1
vnet0@ldom1 00:14:4f:fb:1a:ff 1
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw1 00:14:4f:fb:8e:ff aggr2 switch@1 1 1
PEER MAC PVID VID
vnet1@ldom1 00:14:4f:f8:17:ff 1
vnet1@ldom2 00:14:4f:f8:c2:ff 1
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 ldom2_swap /ldoms/swap/server2ldom2
ldom2_root /dev/dsk/c4t600601601CE1210018F9E37BD2AADD11d0s2
ldom1_swap /ldoms/swap/server2ldom1
ldom1_root /dev/dsk/c4t600601601CE121007E02166CD2AADD11d0s2
CLIENT VOLUME
ldom2_swap@ldom2 ldom2_swap
ldom2_root@ldom2 ldom2_root
ldom1_swap@ldom1 ldom1_swap
ldom1_root@ldom1 ldom1_root
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom1 active -n---- 5000 30 15G 3.7% 192d 6h
MAC
00:14:4f:f8:a5:ff
HOSTID
0x84f8a5f5
VCPU
VID PID UTIL STRAND
0 4 0.4% 100%
1 5 0.3% 100%
2 6 0.1% 100%
3 7 4.4% 100%
4 8 0.2% 100%
5 9 0.2% 100%
6 10 14% 100%
7 11 0.1% 100%
8 12 8.1% 100%
9 13 0.1% 100%
10 14 0.1% 100%
11 15 0.1% 100%
12 16 0.3% 100%
13 17 0.1% 100%
14 18 0.1% 100%
15 19 0.1% 100%
16 20 0.3% 100%
17 21 0.6% 100%
18 22 0.3% 100%
19 23 0.1% 100%
20 54 1.0% 100%
21 55 0.5% 100%
22 56 1.2% 100%
23 57 0.2% 100%
24 58 4.5% 100%
25 59 0.9% 100%
26 60 0.0% 100%
27 61 0.1% 100%
28 62 0.1% 100%
29 63 0.3% 100%
MAU
ID CPUSET
1 (8, 9, 10, 11, 12, 13, 14, 15)
2 (16, 17, 18, 19, 20, 21, 22, 23)
6 (48, 49, 50, 51, 52, 53, 54, 55)
7 (56, 57, 58, 59, 60, 61, 62, 63)
MEMORY
RA PA SIZE
0x8000000 0x88000000 10G
0x401800000 0x6b1800000 5G
VARIABLES
auto-boot?=true
boot-device=ldom1_root:b
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:fb:1a:ff 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:f9:ff:ff 1
vnet0@ldom2 00:14:4f:fb:7b:ff 1
NAME SERVICE DEVICE MAC MODE PVID VID
vnet1 primary-vsw1@primary network@1 00:14:4f:f8:17:ff 1
PEER MAC MODE PVID VID
primary-vsw1@primary 00:14:4f:fb:8e:ff 1
vnet1@ldom2 00:14:4f:f8:c2:ff 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
ldom1_swap ldom1_swap@primary-vds0 disk@0 primary
ldom1_root ldom1_root@primary-vds0 disk@1 primary
VCONS
NAME SERVICE PORT
group1 primary-vcc0@primary 5000
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom2 active -n---- 5000 30 15000M 0.8% 192d 6h
MAC
00:14:4f:fa:e8:ff
HOSTID
0x84fae839
VCPU
VID PID UTIL STRAND
0 24 1.0% 100%
1 25 1.0% 100%
2 26 0.0% 100%
3 27 0.0% 100%
4 28 0.1% 100%
5 29 0.3% 100%
6 30 0.0% 100%
7 31 0.0% 100%
8 32 0.0% 100%
9 33 0.1% 100%
10 34 1.3% 100%
11 35 0.0% 100%
12 36 0.1% 100%
13 37 1.0% 100%
14 38 1.9% 100%
15 39 0.0% 100%
16 40 0.0% 100%
17 41 0.0% 100%
18 42 0.1% 100%
19 43 0.5% 100%
20 44 0.2% 100%
21 45 0.0% 100%
22 46 0.2% 100%
23 47 0.4% 100%
24 48 0.2% 100%
25 49 0.0% 100%
26 50 0.0% 100%
27 51 0.0% 100%
28 52 0.0% 100%
29 53 0.0% 100%
MAU
ID CPUSET
3 (24, 25, 26, 27, 28, 29, 30, 31)
4 (32, 33, 34, 35, 36, 37, 38, 39)
5 (40, 41, 42, 43, 44, 45, 46, 47)
MEMORY
RA PA SIZE
0x8000000 0x308000000 15000M
VARIABLES
auto-boot?=true
boot-device=/virtual-devices@100/channel-devices@200/disk@1:b ldom2_root
keyboard-layout=US-English
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:fb:7b:ff 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:f9:ff:ff 1
vnet0@ldom1 00:14:4f:fb:1a:ff 1
NAME SERVICE DEVICE MAC MODE PVID VID
vnet1 primary-vsw1@primary network@1 00:14:4f:f8:c2:ff 1
PEER MAC MODE PVID VID
primary-vsw1@primary 00:14:4f:fb:8e:ff 1
vnet1@ldom1 00:14:4f:f8:17:ff 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
ldom2_swap ldom2_swap@primary-vds0 disk@0 primary
ldom2_root ldom2_root@primary-vds0 disk@1 primary
VCONS
NAME SERVICE PORT
group1 primary-vcc0@primary 5000
[1657]root@server2ldom1:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z3
inet 127.0.0.1 netmask ff000000
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z2
inet 127.0.0.1 netmask ff000000
lo0:3: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z6
inet 127.0.0.1 netmask ff000000
lo0:4: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1jboss
inet 127.0.0.1 netmask ff000000
lo0:5: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1apache
inet 127.0.0.1 netmask ff000000
lo0:6: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone server2ldom1z1
inet 127.0.0.1 netmask ff000000
vnet0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.10.0.21 netmask ffffff00 broadcast 10.10.0.255
ether 0:14:4f:fb:1a:ff
vnet0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z2
inet 10.10.0.33 netmask ffffff00 broadcast 10.10.0.255
vnet0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z6
inet 10.10.0.36 netmask ffffff00 broadcast 10.10.0.255
vnet0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1jboss
inet 10.10.0.34 netmask ffffff00 broadcast 10.10.0.255
vnet0:4: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1jboss
inet 10.10.0.35 netmask ffffff00 broadcast 10.10.0.255
vnet0:5: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z1
inet 10.10.0.32 netmask ffffff00 broadcast 10.10.0.255
vnet0:6: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1z1
inet 10.10.0.74 netmask ffffff00 broadcast 10.10.0.255
vnet0:7: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone server2ldom1jboss
inet 10.10.0.87 netmask ffffff00 broadcast 10.10.0.255
vnet1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:14:4f:f8:17:ff
vnet1:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
zone server2ldom1z3
inet 10.10.1.101 netmask fffffc00 broadcast 10.10.47.255
vnet1:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
zone server2ldom1apache
inet 10.10.1.5 netmask fffffc00 broadcast 10.10.47.255
[1701]root@server2ldom1:~# zonecfg -z server2ldom1jboss info
zonename: server2ldom1jboss
zonepath: /zones/server2ldom1jboss
brand: native
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: shared
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
inherit-pkg-dir:
dir: /opt/sfw
inherit-pkg-dir:
dir: /opt/
net:
address: 10.10.0.34
physical: vnet0
defrouter: 10.10.0.1
net:
address: 10.10.0.35
physical: vnet0
defrouter: 10.10.0.1
net:
address: 10.10.0.87
physical: vnet0
defrouter: 10.10.0.1
attr:
name: comment
type: string
value: server2ldom1jboss
[1702]root@server2ldom1:~# zonecfg -z server2ldom1apache info
zonename: server2ldom1apache
zonepath: /zones/server2ldom1apache
brand: native
autoboot: true
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: shared
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
inherit-pkg-dir:
dir: /opt/sfw
inherit-pkg-dir:
dir: /opt/
net:
address: 10.10.1.5/22
physical: vnet1
defrouter not specified
attr:
name: comment
type: string
value: server2ldom1apache
Edited by: coreyva on Feb 18, 2012 11:36 AM

After further research, I think the best course of action will be to create a VLAN for the zone behind the BigIP and then create the corresponding interface in the vlan and zone. Using this links as my references in case anyone is interested. I'll post what I come up with.
https://blogs.oracle.com/stw/entry/using_ip_instances_with_vlans
https://blogs.oracle.com/stw/entry/solaris_zones_and_networking_common
http://docs.oracle.com/cd/E19253-01/816-4554/816-4554.pdf # AdministeringVirtualLocalAreaNetworks
http://docs.oracle.com/cd/E19053-01/ldoms.mgr11/820-4913-10/820-4913-10.pdf # Assign VLANs to a Virtual Switch and Virtual
Network Device

[svn:fx-trunk] 12552: DataGroup now tracks the indices of the active virtual item renderers with a list , rather than the min/max values.

Revision: 12552
Revision: 12552
Author:   [email protected]
Date:     2009-12-04 13:45:12 -0800 (Fri, 04 Dec 2009)
Log Message:
DataGroup now tracks the indices of the active virtual item renderers with a list, rather than the min/max values.
DataGroup/addItemRendererToDisplayList() now respects the overlay.
QE notes:
Doc notes:
Bugs: sdk-24052
Reviewer:
Tests run: DataGroup, List
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24052
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Hello Martin:
Thanks for your input. However I am not certain we have resolved this issue adequately, or understand the principles governing the css as regards this spry menu framework 2.0 (1.0).
For example, the menu only works in IE 6.0 if the css remains in the head. I agree with your original post that it shouldn't make any difference whether the css is posted in the head or in a separate style sheet (so long as specificity issues are addressed). Both should work -- and yet it doesn't.
If the CSS is placed in the separate style sheet governing the total site, it doesn't work for 6.0. If placed at the top of the style sheet, conflicts of specificity prevent the menu from rendering properly in any of the browsers causing the rules for general links to govern the menu.   This has been verified using a cross browser testing. If the styles are placed at the bottom of the style sheet to help them take precedence, they work in all the browsers except for IE 6.
The website I am building needs to support IE 6 for a variety of reasons, and because it is catering to the non-profit community and to low income persons, I am mindful of even small differences in page weight.
So for me, at least, the issue remains baffling.
I appreciate your input, but also would appreciate the input from others, and especially Adobe Community Professionals and employees. The spry framework in this regard is not well documented. I am not certain if this is exclusively a CSS problem, if it might also be complicated by the architecture of the spry framework, or if indeed other variables are at play.
I would be my hope that in resolving the problem, other users of the this particular spry framework might also benefit.
Thanks,
Steve.

Delivery Related Billing rather than Order Related Billing in Return Sales

Hi
There is a requirement from the client that the Returns Invoice (RE) generated must be related to LR Delivery Type rather than Return Sales Order Type(RE).
I have maintained the Copy Control from LR (Returns Delivery Type) to RE(Returns Invoice Type).
Then Changed the billing relevance of REN (Item Category ) from - 'B' Relevant for order-related billing - status acc.to order qty
to A Delivery-related billing document.
When i create the Returns Invoice, it is allowing me to create the Invoice even before the Post Goods Receipt of the LR Returns Delivery Document.
It should allow me to create the invoice only after Post Goods Receipt.
Can any one share their inputs.
Regards
Mohan

Dear Kandy Sreekanth ,
PLEASE READ THR RULES OF ENGAGEMENT BEFORE REPLYING TO POSTS / POSTING ISSUES
Do not ask for points - This forum should be firstly about information exchange; points are an incentive and a way of saying thanks.
Asking for points is like asking someone to say "thank you": The only time we do this in real life is when teaching a child good manners. Saying it to an adult is insulting, so why do it in the forums? If someone keeps asking questions without awarding points, simply stop answering them or use the abuse button to report it.
Thanks & Regards,
Hegal K Charles

Can I somehow teach my 6th gen Nano to tell me how far I've walked in miles rather than "steps," by telling it how long each of my steps is?

Using the pedometer in a 6th gen Nano:
Currently, it (very accurately) tells me how many steps I've taken when I go for a walk. Works fine.
Meanwhile, on my own, I carefully calculated how far each of my "steps" is (2.231 feet/step, in case you're curious).
Thus, after each walk, I multiply the number of steps I've gone by 2.231 to get the number of feet I have traveled, and then divide by 5,280 to get the exact distance I've traveled in miles.
While this system works fine enough, I'd like to avoid having to do a bunch of arithmetic after each excursion. So I ask:
Is there any way to input into the Nano the exact distance of each of my personal steps, and then have the Nano automatically display to me the distance of a walk in mile units of measurement, rather than (or perhaps in addition to) simply the number of "steps" I've taken?

I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

Data log directly from Norma 4000 power analyser rather than via Keithley 2700 data logger

Hello fellow LabVIEW users
My Norma 4000 power analyser is connected to my Keithley 2700 data logger from which it logs data via GPIB using the attached VI.
Prior to making this VI I was not aware that the Norma 4000 could also log data values directly using labview which I found in the following LabVIEW post.
http://forums.ni.com/ni/attachments/ni/170/536731/1/LV9.zip
The Keithley logs the values into a *.txt file that can be opened in excel for analysis of the data. There are 7 values that are pulled from the power analyser and 1 from a radiometer and 1 from a temperature sensor. I essentially want the 7 values from the data analyser be directly input into the save file i/o rather than going via the Keithley which it is doing now. Some the signal is lost due to noise etc when going from ADC then DAC. Which is why certain values pulled from the Keithley have been multiplied before being put into file i/o.
Since these are popular instruments of choice I was wondering if anyone can direct me to any links to LabVIEW VIs that have already been made that DIRECTLY logs data values from the Norma 4000 into a *.txt file as in the attached VI. Or point me in the right direction perhaps. The LNOPA01 Getting Started.vi only shows current values. I want the data values to be logged into the *.txt files at certain time intervals with the corresponding signals from the radiometer and temperature sensor.
The Keithley drivers can be found in the following link
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E93BC659CE034080020E748...
Thanks for all the help beforehand.
Attachments:
Data Logger_Final Version.vi ‏57 KB

Hi,
I was not able to find an example that will directly log data from the Norma 4000. I looked at the LNOPA01 Getting Started.vi and it seems like, with a few modifications, you could use this to log data. You would have to open a file, write the collected data to the file, and then close the file. You are already doing something similar to this in the VI you attached.
If you only want to measure data at certain times, you could use a case structure in the while loop and only write to file when a certain condition is met. If this isn't an option for you, could you please elaborate on what difficulties you are seeing?
Thanks,
Paul B.
Motion Control R&D

HtmlText is Input rather than dynamic

Similar Messages

Maybe you are looking for