HTTP Authentication Digest for SIP messages in a trunk SIP CUCME
Hello,
we would like to implement HTTP Authentication Digest for SIP messages in a trunk SIP between a Cisco 2851 and an Asterisk server.
We are using CUCM Express with 15.1(4)M (CME 8.6) as voice gateway to connect to PSTN.
According to Cisco documentation:
"To configure a gateway to use HTTP Authentication Digest, give the following command in each dial peer or SIP-UA configuration mode:
authentication username username password password [realm realm]."
The problem is that when call is from CISCO to ASTERISK, Asterisk sends a challenge to Cisco to do Authentication:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.0.70.11:5060;branch=z9hG4bK3E205D
Remote-Party-ID: "DN1001" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "DN1001" <sip:[email protected]>;tag=5317D4-2271
To: <sip:[email protected]>
Date: Thu, 20 Feb 2014 10:55:56 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1679566433-2572423651-2156454406-1292596908
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1392893756
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 208
<--- Reliably Transmitting (no NAT) to 10.0.70.11:5060 --->
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 10.0.70.11:5060;branch=z9hG4bK3E205D;received=10.0.70.11
From: "DN1001" <sip:[email protected]>;tag=5317D4-2271
To: <sip:[email protected]>;tag=as665c9410
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 11.7.0
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="559bd1d2"
Content-Length: 0
However, when call is for ASTERISK to Cisco, there is no challenge sent.
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.1.32.70:5060;branch=z9hG4bK0c57d67c
Max-Forwards: 70
From: "JOSE MANUEL" <sip:[email protected]>;tag=as2f789a9f
To: <sip:[email protected]>
Contact: <sip:[email protected]:5060>
Call-ID: [email protected]:5060
CSeq: 102 INVITE
User-Agent: Asterisk PBX 11.7.0
Date: Thu, 20 Feb 2014 09:58:27 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 282
<--- SIP read from UDP:10.0.70.11:60829 --->
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.1.32.70:5060;branch=z9hG4bK0c57d67c
From: "JOSE MANUEL" <sip:[email protected]>;tag=as2f789a9f
To: <sip:[email protected]>
Date: Thu, 20 Feb 2014 10:58:27 GMT
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 10.1.32.70:5060;branch=z9hG4bK0c57d67c
From: "JOSE MANUEL" <sip:[email protected]>;tag=as2f789a9f
To: <sip:[email protected]>;tag=556830-757
Date: Thu, 20 Feb 2014 10:58:27 GMT
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: "DN1001" <sip:[email protected]>;party=called;screen=no;privacy=off
Contact: <sip:[email protected]:5060>
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
My configuration in Cisco device is:
dial-peer voice 1 voip
description **Calls to ASTERISK **
destination-pattern 9T
session protocol sipv2
session target sip-server
codec g711ulaw
sip-ua
keepalive target ipv4:10.1.32.70
authentication username CCME password 7 070E234F4A realm asterisk
sip-server ipv4:10.1.32.70:5060
To avoid that the ASTERISK is blocked by Cisco TOLLFRAUD_APP I have added:
voice service voip
ip address trusted list
ipv4 10.1.32.70 255.255.255.255
allow-connections sip to sip
sip
registrar server
The issue is that I would like that Cisco also send a challenge to asterisk server to authenticate SIP messages.
Any ideas?.
Regards.
Hello,
yes, but credentials command configure credentials that are used when Cisco UA must register in a server.
I do not need register Cisco into Asterisk server. What I want is that Cisco authenticate SIP messages that receive. I know
that can be enough with TOLLFRAUD_AP where remote IP is checked, but I want to do something like others routing
protocols (as OSPF, BGP) where every message must be authenticated.
Thanks.
Regards.
Similar Messages
-
HTTP authentication key for hand shake at receiver side for HTTP POST
Hi All,
HTTP post receiver system is expecting an authentication key to be send by PI HTTP_AAE adapter while posting XML message to them.
The receiver system has a utility program in JAVA to validate this key. Has anyone done this kind of scenario in PI 7.31/7.4
How does this simple authentication mechanism works? If this doesn't work, we have to rely on just uname/pwd but that is not really recommended for our landscape because of security concerns. So the key is the only better option as of now. Please help!!
thx
mike
Attached some import packages used in the java util program in the receiver system. for validating the authentication key send by PI
import java.security.MessageDigest;
import java.util.Calendar;
import java.security.NoSuchAlgorithmException;
import java.io.UnsupportedEncodingException;
import java.io.IOException;
import sun.misc.BASE64Encoder;
import sun.misc.BASE64Decoder;
I am not pasting the java program utility here due to proprietary reasons. thx for understandingHi Michael
You can construct the target URL to include the query parameter/value using Dynamic Configuration in Message Mapping.
This previously worked on the ABAP HTTP adapter, but from the thread below it seems it is not supported on the HTTP_AAE. Not sure what version you are on, and if SAP has provided support for this in the latest SPs.
HTTP_AAE Adapater - using of dynamic url parame... | SCN
If HTTP_AAE approach can't work for you, you can use the SOAP adapter - check ASMA and "Do not use SOAP envelope"
Here is a snippet of the code you can use in a UDF for your message mapping
//write your code here
DynamicConfiguration conf = (DynamicConfiguration)container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TServerLocation");
String url = "http://local.yahooapis.com/MapsService/V1/mapImage?appid=" + appid + "--&street=" + street + "&city=" + city + "&zip=" + zip;
conf.put(key, url);
return appid;
Rgds
Eng Swee -
How do we determine the HTTP authentication header for our hosted solution?
How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support -
Suppress HTTP Authentication dialog for invalid credentials
If I want a custom login screen with domain, username and password fields for my AIR application, that uses Basic Authentication on the server, I can use
<code>
URLRequestDefaults.setLoginCredentialsForHost(myDomain, myUsername, myPassword);
</code>
and it works fine. But if I enter invalid credentials, the "built-in" authentication dialog pops up. How can I suppress that? I read somewhere that I could use URLRequestDefaults.authenticate = false; but that just seems to kill the authentication process altogether.
Any ideas?No, that's not the case. I am talking about the user authentication dialog that is shown whenever you access a member restricted web site.
Through Java, we can pass the user name and password values if we know, and the dialog will not be shown. But, I face the problem in NS 4.7x.
-JP -
Ip http authentication aaa login-authentication doesnt work
I have "ip tacacs source-interface Vlan1 " in my config because without it enabled I cant ssh in with tacacs. However, with that line in the config, I cant access via https unless I have the line "ip http authentication local"
For http access , the user should have privilege level 15. This is how you enable it on acs.
Bring users/groups in at level 15
1. Go to user or group setup in ACS
2. Drop down to "TACACS+ Settings"
3. Place a check in "Shell (Exec)"
4. Place a check in "Privilege level" and enter "15" in the adjacent field
Regards,
~JG
Do rate helpful posts -
Authentication failed for realm level_15
hi,
I'm trying to configure HTTP server to authenticate users with AAA platform. I get the following error while trying to connect with Cisco Configuration Pro:
TNRTAGCS01002#
Apr 23 15:29:42.129 CET: HTTP AAA Login-Authentication List name: default
Apr 23 15:29:42.165 CET: HTTP: Authentication failed for realm level_15 or view_access
Apr 23 15:29:42.165 CET: HTTP: Authentication failed for level 15
Apr 23 15:29:44.193 CET: HTTP AAA Login-Authentication List name: default
Apr 23 15:29:44.225 CET: HTTP: Authentication failed for realm level_15 or view_access
Apr 23 15:29:44.225 CET: HTTP: Authentication failed for level 15
Here's the AAA config:
aaa new-model
aaa group server tacacs+ TACACS_group
server {A}
server {B}
tacacs-server host A key A1
tacacs-server host B key B1
ip tacacs source-interface GigabitEthernet0/0.1900
aaa authentication login default group TACACS_group local
aaa authentication enable default none
aaa authorization config-commands
aaa authorization commands 1 default group TACACS_group if-authenticated
aaa authorization commands 15 default group TACACS_group if-authenticated
aaa accounting exec default
action-type start-stop
group TACACS_groupHi,
Yes, local authentication does work.
I added below the HTTP configuration:
ip http server
ip http authentication aaa login-authentication default
no ip http secure-server
I thought that HTTP would use the default method list for authentication. Is that possible or should I define a seperate AAA method list?
By the way, I always rate helpful posts -
Testing HTTP Authentication Methods for URL https://mail.domain.co.nz/rpc/rpcproxy.dll?cl-cas01.domain.local:6002.
The HTTP authentication test failed.
Tell me more about this issue and how to resolve it
Additional Details
Not all the required authentication methods were found.
Methods Found: Negotiate
Methods Required: NTLM
Any ideas how to get around this with the exchange connectivity tester? If I change from negotiate to basic or ntlm, I then have issues with clients on the local network.This link does not work. Could you update this post with the information that helped fix your issue? I am receiving the same error. Everything works internally. I have a casarray with 3 client access servers. If I try and connect using Outlook Anywhere externally,
all the tests pass except for the last one which states:
Testing HTTP Authentication Methods for URL https://casarray.mydomain.com/rpc/rpcproxy.dll?casarray.mydomain.com:6002.
The HTTP authentication test failed.
Additional Details
An HTTP 500 response was returned from Unknown.
HTTP Response Headers:
Content-Length: 3423
Cache-Control: private
Content-Type: text/html; charset=utf-8
Date: Tue, 03 Jun 2014 01:59:11 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Elapsed Time: 2135 ms.
Here is the full test:
Testing RPC/HTTP connectivity.
The RPC/HTTP test failed.
Additional Details
Elapsed Time: 10139 ms.
Test Steps
Attempting to resolve the host name casarray.mydomain.com in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: MyIpAddress
Elapsed Time: 262 ms.
Testing TCP port 443 on host casarray.mydomain.com to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 213 ms.
Testing the SSL certificate to make sure it's valid.
The certificate passed all validation requirements.
Additional Details
Elapsed Time: 1347 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server casarray.mydomain.com on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=casarray.mydomain.com, OU=Domain Control Validated - RapidSSL(R), OU=See www.rapidssl.com/resources/cps (c)14, OU=GT62161020, SERIALNUMBER=4/00u9cheL7q8Gq41IXnlvVd8mb8-rjb, Issuer: CN=RapidSSL CA, O="GeoTrust, Inc.", C=US.
Elapsed Time: 1260 ms.
Validating the certificate name.
The certificate name was validated successfully.
Additional Details
Host name casarray.mydomain.com was found in the Certificate Subject Common name.
Elapsed Time: 0 ms.
Certificate trust is being validated.
The certificate is trusted and all certificates are present in the chain.
Test Steps
The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=casarray.mydomain.com, OU=Domain Control Validated - RapidSSL(R), OU=See www.rapidssl.com/resources/cps (c)14, OU=GT62161020, SERIALNUMBER=4/00u9cheL7q8Gq41IXnlvVd8mb8-rjb.
One or more certificate chains were constructed successfully.
Additional Details
A total of 1 chains were built. The highest quality chain ends in root certificate CN=GeoTrust Global CA, O=GeoTrust Inc., C=US.
Elapsed Time: 32 ms.
Analyzing the certificate chains for compatibility problems with versions of Windows.
Potential compatibility problems were identified with some versions of Windows.
Additional Details
The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
Elapsed Time: 4 ms.
Testing the certificate date to confirm the certificate is valid.
Date validation passed. The certificate hasn't expired.
Additional Details
The certificate is valid. NotBefore = 5/6/2014 10:15:31 AM, NotAfter = 5/9/2015 5:16:00 PM
Elapsed Time: 0 ms.
Checking the IIS configuration for client certificate authentication.
Client certificate authentication wasn't detected.
Additional Details
Accept/Require Client Certificates isn't configured.
Elapsed Time: 6179 ms.
Testing HTTP Authentication Methods for URL https://casarray.mydomain.com/rpc/rpcproxy.dll?casarray.mydomain.com:6002.
The HTTP authentication test failed.
Additional Details
An HTTP 500 response was returned from Unknown.
HTTP Response Headers:
Content-Length: 3423
Cache-Control: private
Content-Type: text/html; charset=utf-8
Date: Tue, 03 Jun 2014 01:59:11 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Elapsed Time: 2135 ms. -
Lync mobility and HTTP authentication test failed. Is reverse proxy required?
I currently have the following setup.
1 x 2013 edge server lync1.local.com
has 3 dmz ips for external names
has 1 internal ip
2 x 2013 std front end servers lync2 & lync3.local.com
Ive read that in 2013 the mobility service is installed automatically on the front end servers and i do see it running on both.
All my clients can connect from the windows and mac clients(internally and externally) but not from phone or windows app store client (internally or externally)
running the exchangeconnectivity test on the website i get the following error
Testing HTTP authentication methods for URL https://lyncdiscover.external.com/Autodiscover/AutodiscoverService.svc/root/user.
HTTP authentication test failed.
Additional Details
A Web exception occurred because an HTTP 404 - NotFound response was received from Unknown.
HTTP Response Headers:
X-MS-Server-Fqdn: lync1.local.com
Connection: close
Content-Length: 64
Content-Type: text/plain
Server: RTC/5.0
Elapsed Time: 427 ms.
After some reading I notice that many people refer to a reverse proxy when dealing with mobility.
I do not have a reverse proxy server installed. Is this required for the mobility to work correctly? I cant just use the edge server?
Thanks in advance for any help.Take a look at Georg Thomas' blog: http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html also the Citrix official documentation: http://www.citrix.com/global-partners/microsoft/netscaler.html
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
The HTTP authentication test failed on activesync exchange 2010
`21
Testing HTTP Authentication Methods for URL https://xxxxxdyndns.biz/Microsoft-Server-ActiveSync/.
The HTTP authentication test failed
Additional Details
The Initial Anonymous HTTPS request didn't fail, but Anonymous isn't a supported authentication method for this scenario.
Elapsed Time: 670 ms -
When i was run my web application in everyday morning(after that issue was not reproduced), it was immediatly redirected to logout page
while i perform any task after login.Session_end function was called unfortunately.
Event log as follows
Event code: 4005
Event message: Forms authentication failed for the request. Reason: The ticket supplied was invalid.
Event time: 10/10/2014 10:36:33 AM
Event time (UTC): 10/10/2014 5:06:33 AM
Event ID: a268f3dd45da406dadd78773a858067f
Event sequence: 4
Event occurrence: 1
Event detail code: 50201
Application information:
Application domain: 463c736b-2-130573911817035712
Trust level: Full
The output while session_end() was called is as follows
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Program Files\Common Files\Microsoft Shared\DevServer\11.0\WebDev.WebServer40.exe'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\WebDev.WebHost40\v4.0_11.0.0.0__b03f5f7f11d50a3a\WebDev.WebHost40.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms\v4.0_4.0.0.0__b77a5c561934e089\System.Windows.Forms.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Web\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Caching\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Runtime.Caching.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Build.Utilities.v4.0\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.Build.Utilities.v4.0.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
A first chance exception of type 'System.ArgumentNullException' occurred in System.Core.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.RegularExpressions\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.RegularExpressions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.3ly5lssc.dll', Symbols loaded.
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in System.Web.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
'iexplore.exe' (Script): Loaded 'Script Code (Windows Internet Explorer)'.
The thread '<No Name>' (0x2178) has exited with code 0 (0x0).
The thread '<No Name>' (0x22c0) has exited with code 0 (0x0).
The thread '<No Name>' (0x3c4) has exited with code 0 (0x0).
The thread '<No Name>' (0x2198) has exited with code 0 (0x0).
The thread '<No Name>' (0x19e0) has exited with code 0 (0x0).
The thread '<No Name>' (0x21c8) has exited with code 0 (0x0).
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.yz9nltrj.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Deployment\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Deployment.dll'
A first chance exception of type 'System.Deployment.Application.InvalidDeploymentException' occurred in System.Deployment.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
WebDev.WebServer40.exe Information: 0 : [Source : ASP.global_asax ] - <No Message>
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Mobile\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Mobile.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml.Hosting\v4.0_4.0.0.0__31bf3856ad364e35\System.Xaml.Hosting.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Entity\v4.0_4.0.0.0__b77a5c561934e089\System.Web.Entity.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Design\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Design.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'A_7ac34899_0878_4547_ab89_13333f2a2da8'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_2vnmaiqi.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_axfwmnjt.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\a9a217f9\93d383b9_47e4cf01\myapp.resources.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
The thread '<No Name>' (0x230c) has exited with code 0 (0x0).
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
Exception was thrown at line 3, column 25599 in http://localhost:51399/myapp/public/jquery-1.7.2.min.js
0x800a139e - JavaScript runtime error: SyntaxError
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
The thread '<No Name>' (0x258c) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : [Source : ASP.login_aspx ] - <No Message>
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Diagnostics.ServiceModelSink\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Diagnostics.ServiceModelSink.dll'
WebDev.WebServer40.exe Information: 0 : [Source : wpcsLibrary.wpcsUserManager.UserAuthenticate ] - <No Message>
A first chance exception of type 'System.IO.IOException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Net.Http\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Net.Http.dll'
WebDev.WebServer40.exe Information: 0 : [Source : ] - <No Message>
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
WebDev.WebServer40.exe Information: 0 : Entering method call dbUtilities
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll'
WebDev.WebServer40.exe Information: 0 : [Source :dbUtilities ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Exiting method call dbUtilities
WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
The thread '<No Name>' (0x24dc) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
The thread '<No Name>' (0x2590) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Users\E849324\myweb\Finalview\NCI\Source\WIN-PAK 2.0 R5\SourceCode\WPCSWEB\myapp\bin\DoorApp.app', Symbols loaded.
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
The thread '<No Name>' (0x1f04) has exited with code 0 (0x0).
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Instance.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.set'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
The thread '<No Name>' (0x26c0) has exited with code 0 (0x0).
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Clear'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.List'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.IconImage.get'
Step into: Stepping over method without symbols 'string.IsNullOrEmpty'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Label'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Name.get'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Text.set'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Description.get'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.ToolTip.set'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.Add'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.ToArray'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].set'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Web.UI.HtmlControls.HtmlControl.Style.get'
Step into: Stepping over method without symbols 'System.AppDomain.Flags.get'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Web.UI.CssStyleCollection.Add'
The thread '<No Name>' (0x1b04) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : Entering method call ASP.site_master
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call ASP.site_master
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'Please post this question to the forums at http://www.asp.net.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Configure plain http adapter for receiving message from an external system
Hi,
we use Pi/700.
Now I have an external system and I have to use HTTP (plain) to send messages to XI (via plain http adapter).
I have no experiences with HTTP!
In the external system I can only configure "URL, Username, Password" for sending messages - that's all!
What do I have to configure in XI (communication channel, abap-stack, java-stack,...)?
I don't know the URL of my XI-system. Is there an transaction code to get this information?
Why do I need a Username/Pasword?
For testing I can use a "http-post test tool" I found here in this forum.
Thank you all for any help!
Regards
WolfgangHi Hummel,
In Exteranl System u have to use these values
name="myhost" value="xiserver"
name="myport" value="8000"
name="mysystem" value="XY_BSservice"
name="myinterface" value="Order_out"
name="mynamespace" value="urn:xi:hcl:powebapp"
name="myqos" value="BE"
name="myclient" value="300"
name="myuser" value="XYZCLNT"
name="mypass" value="xiuser"
Here My system is the Business service created in Integration directory of XI, Interface is the one created in Integration Repository (This is Outbaound from external sys to XI)
In XI U have to create
Data Types : 1) Source Structure data type(from extenal sys)
2) Target structure (where u want to send from XI)
Message Types : 2 with above DT's
Message Interface: 1) Outbound, Async (Order_out)
2) Inbound , Async (for the target sys)
Then Message mapping and Interface mapping as usual..
And in ID u have to create 2 services one is XY_BSservice for sending system and the other is for receiving system...
For sending system no communication channel required...
Hope u will get idea from the above..
Need any further u r welcome..
Regards
Sridhar -
Outlook for mac, message HTTP error resource not found 18596
outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!!
Help appreciated!!!!!!!!Same probelm any suggestions ????
-
Http authentication failing on all sites, does not even prompt me for user/pass
Hi,
After an apt-get update, sites that use HTTP authentication do not prompt for credentials and go straight to HTTP:401. It is only affecting this browser, others have no issues. I also updated a FF in Windows, no issues there after the update.Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Internationalizing Basic HTTP authentication browser dialog for UserID
Is it possible to have multibyte user ID for Basic HTTP authentication? Based on RFC2617 user ID has to be *Text, which basically is ASCII. But I thought maybe someone has a workaround for this limitation. Our entire web app is internationalized, we use UTF-8 as encoding for JPS pages and request processing, and that all works fine, but there is one area where we use Basic HTTP authentication, and so far I was not able to find a way to internatianalize that. Once the resource is reqested, we process request in the servlet and if the user is not authenticated we send authentication challenge response to the browser. Response encoding is set to UTF-8. After user enters the credentials, I process those in the same servlet , again using UTF-8. Of course when I tried to input the japanese ( multibyte)userID, the authentication is failing. I think the browser is corrupting DBCS data once it Base64 encodes it... Does anyone have ideas whether it is possible to internationalize this at all?
You'll probably need your own ServletFilter to process the authentication header, since servers will mostly decode headers in the locale encoding, regardless of any charset in the Content-type header of the request. Getting browsers to use UTF-8 encoding before base64 might be a bit tricky though.
It is probably better to use form based login. The procedure for getting UTF-8 encoded form parameters is a well understood FAQ for this forum. -
OIF 11g Sample Authentication Engine for Trusted HTTP Header
We are trying to achieve OIF authetication based on headers set by windows native authentication. As per our research we have come across this example located at URL: http://www.oracle.com/technology/sample_code/products/id_mgmt/index.html (OIF 11g Sample Authentication Engine for Trusted HTTP Header).
At this point we are trying to see the deployment architecture and configuration required to achieve the functionality described in the example.
Can someone please elaborate more on the set up and configuration required for the example to work ?
Appreciate your feedback.Realized the hyperlink missing for oracle example..
Here it is: http://www.oracle.com/technology/sample_code/products/id_mgmt/oif/customauthn.jsp.SAMPLE
Maybe you are looking for
-
Adobe Extension Manager CC frozen
Hi, I have been having some serious problems with the Adobe Extension Manager. I while ago, I updated from Photoshop CS6 to Adobe Creative Cloud and when I saw my Photshop extensions were not installed in Photshop CC, I launched the Extension Manager
-
Problem with remote control and Windows 7 - HP Pavilion 6301eu
I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you
-
Error using SET SERVEROUTPUT ON command
HI, I am using Hudson configuration tool for automated deployment.The script was running successfully without spool command,but when i use these commands i got below exception. spool file1_select.log SET SERVEROUTPUT ON; DECLARE l_vc_user VARCHAR2 (5
-
Hardware requirement for SAP HANA
All, I am following all about HANA modelling and other related topics. Now, i am concentrating for the hardware part. Does SAP HANA requires separate hardware than that of existing ECC hardware? I mean can ECC instance & HANA run on same hardware or
-
I'm trying to download the newest version of iTunes onto my windows computer and it keeps saying it cannot find 'iTunes.msi' program in my files. How do I fix this?