HTTP Communication with iSoft eCommerce Suite

Hello,
I am trying to establish an SSL communication link with a business partner that is running the iSoft eCommerce Suite. The business partner receives and transmits data using an AS2 engine. Unfortunately, the business partner has yet to configure a communication link using SSL. Is there anyone out there that has successfully setup a HTTPS communication link with a partner that uses iSoft eCommerce Suite? Is a third party adapter required for this type of scenario? If so, on whose system is the adapter required?
Thanks in advance,
Jack

Hi Samba,
I'd suggest better raise it in he ADF forum.
However, this should be possible by calling the Arbortext functions on click of ADF form buttons. Or you may send the information to a placeholder (JMS, File, DB etc.) from where Arbortext can pick that information.
Regards,
Neeraj Sehgal

Similar Messages

Why do you need to enable http communication with Basic authentication with Exchange Admin IP?

The pre-reqs for the Exchange Admin IP say you have to make a few changes on your Exchange server (2010 on prem in my case). I have a few questions about those pre-reqs and I'm not able to find documentation online to help:
Why does http communication with basic authentication for the powershell virtual directory in IIS need to be enabled? In the IP you still specify to connect over an SSL connection. The concern is what is being sent over unencrypted and what impacts are
there to the security of the Exchange server.
What role does the IP connect to (MBX/CAS/HT)? I'm not an Exchange guy so I don't know which roles install the PowerShell virtual directory.
Are there any technet pages or white papers that talk about the MS developed IPs in any more detail than basic config?
I appreciate any help anyone can offer. Thanks!
-Raj

Yeah I find this perplexing as well. I'm guessing it has something to do with Opalis origins perhaps.
Would be good to understand why.

Http communication with non-sap system

Hi ,
We have a requirement to send OM related data to a non-sap system using HTTP post in XML format and receive the response from that external system. We are on ECC 6.0 and we cannot use XI at this time.
What would be the correct approach to do this? I read that we could use ICM for HTTP communication am I on the right track?
Thanks

Hi ,
We have similar type of requirement, if you have the solution then let me know .
Thanks in adv
Vishnu

Non-XI HTTP Communication with non-sap system

Hi ,
We have a requirement to send OM related data to a non-sap system using HTTP post in XML format and receive the response from that external system. We are on ECC 6.0 and we cannot use XI at this time.
What would be the correct approach to do this? I read that we could use ICM for HTTP communication am I on the right track?
Thanks

What setup do we need for this ?
We are on ECC 6.0. I am trying to run the program, I am getting http_communication_failure = 1 in the receive function.
I am not sure if I am missing any authorizations/setup.
Thanks for your help.
VV

HTTPS communication with XI

Hi,
We have a scenario where we have to send and receive documents to/from our vendor via internet using HTTPS.
So far we planned to use SOAP adapter for this communication and web dispatcher as reverse proxy in our DMZ but the problem is SAP is saying we can not use the web dispatcher for outbound communication
What's the best way to approach this scenario?
Appreciate you help

Hi Dhiraj,
you can use the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm">plain HTTP adapter</a> instead of SOAP. The mapping is now responsible for the task to build the SOAP envelop instead of the SOAP adapter. The plain HTTP adapter allows <a href="http://help.sap.com/saphelp_nw04/helpdata/de/14/ef2940cbf2195de10000000a1550b0/frameset.htm">HTTP and SSL</a>
Regards,
Udo

How do I used HTTP compression with Oracle Business suite

Hi Team,
We having problem with accessing Oracle EBS for large number of users from over the network. At the peak time network bandwidth getting flooded. Can we used any kind of software compression mechanism to reduced network bandwidth .
Thanks & Regards,
Mahesh

Please see these docs.
Oracle E-Business Suite 11i and 12 PC Client Performance [ID 557259.1]
Installing and Configuring Web Cache 10g and Oracle E-Business Suite 12 [ID 380486.1]
Thanks,
Hussein

Http Communication with Saia Burgess Webserver

via a Web Browser with the line
http://pc_name/station_name/cgi-bin/readVal.exe?PDP,,R1000,d
aktuall data (R1000) can be read from the web-server,
how can this call be performed in labview, to get the data from the server?

It looks like you need CGI functions. This is supported by the Internet Toolkit.
I hope that helps,
Jochen Klier
National Instruments Germany

HTTP communication with cookies?

How can i send URLs that requires Cookies? in other words: i have 2 URLs:
http://...url1
http://...url2
if i paste them in Internet Explorer, both work fine. but when sending them with (with HttpUrlConnection.openStream()) the second URL failes because it needs a cookie set.
is there a way i can send the first URL, retrieve the cookies and somehow set these cookies (later) when calling the second url?

Hi,
the following link describes one possible solution for requirement.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/frameset.htm
Regards
Bernd

CIDX Adapter: HTTPS communication with certificates- Send of message failed

Hi,
As per a requirement, I have configured CIDX Receiver adapter so as to send a message to a URL. But unable to send a message and in the audit log of message monitoring it has run into error as given below:
Error during collaboration agreement facade processing -
Party configuration for Party=EDI_XML_Test, PartySchema=DUNS, PartyAgency=016 not found -
normalising the initiating party-id failed : Party configuration for Party=EDI_XML_Test, PartySchema=DUNS, PartyAgency=016 not found
For your information:
1. I have got certificates loaded into the environment.
2. When I use a different adapter like file adapter, for the same configuration, I am able to send the message to the destination.
Let me know anything I am missing.
Regards,
Vijay

Hi,
For additional information, I got more in audit log of monitoring as given below:
Delivering to channel: CC_CIDX_Receiver
Error during collaboration agreement facade processing -
Party configuration for Party=EDI_XML_Odyssey, PartySchema=DUNS, PartyAgency=016 not found -
normalising the initiating party-id failed : Party configuration for Party=EDI_XML_Odyssey, PartySchema=DUNS, PartyAgency=016 not found
Exception caught by adapter framework: Error during collaboration agreement facade processing
Delivery of the message to the application using connection AFW failed, due to: Error during collaboration agreement facade processing.
If anybody knows, let me know how to resolve this issue.
Thanks & Regards,
Vijay

PI 7.1 HTTPS Communication

Hi PI Experts,
We are enabling HTTPS communication in PI 7.1 EHP1 using CIDX adapter. We have nearly completed settings after going through several threads and sap help documentation.
1. Defined SSL parameters in RZ10 (ssl/pse_provider = Java and other parameters)
2. Created entry for private key (2048 key length) in ICM_SSL_<instance id> view of key storage in nwa. Generated CSR response, imported CSR response with CA containing private key, intermediate key.
3. Installed Public key of Partner certificate into ICM_SSL_<instance id> and Trusted CAs
4. Exported key to PSE
5. Restarted ICM
Inspite of completing the above configuration and installation of the certificates, still we are not able to complete HTTPS communication. We are facing two issues
(1) For outbound: HTTPException:Padding length error
(2) For inbound: Client is facing issue "HTTP/401 Unauthorized".
What is the service user that is utilized in HTTP communication with certificate logon in PI 7.1? Where do we see this service user? We expect that through nwa>>configuration management>> Identity Management>> for this service user need to apply PI private key and Client public key.
Please provide your inputs for resolution.

Hi Baskar,
Thanks for the reply.
Inbound communication:
We did see this documentation earlier. As per the link, it says "In the Adapter Engine and PCK, only the security role xi_af_receiver of the J2EE component sap.com/com.sap.aii.af.ms.app*MessagingSystem allows the execution of incoming messages.
we strongly recommend that you create separate messaging users with the corresponding role representing individual business systems in a productive environment."
So we created a new user id for the purpose, through NWA Configuration Management>>Authentication, we could able find the policy configuration sap.com/com.sap.aii.af.ms.app*MessagingSystem. For this policy, we need add authentication log in as 'ClientCertLoginModule'. But we do not know how to add/specify this user id against this policy. Though we have added security role xi_af_receive for this user.
In brief we need to specify the server for this policy through certification logon use this new service user id? We want to know where it can be done.
Thanks,
Suraj Pabbathi

Https communication not connecting from sm59

Hi Team,
Scenario is , via sm59 we are connecting https URL to third-party using a proxy server within our network , and https port also opened in proxy server.
Is there any configurations required in sap for https communication with third party URL.
Error Logs:- While trying to connect https connection from proxy server to a third party URL , we are getting proxy 502 error.
My doubt is do we need to activate https service from ICM , Also is it required to open 443 port number on that particular box
Can anyone help on this. Really appreciate your inputs.
Please suggest.
Regards,
Pradeep G.

Hi Amit,
Please find the below ,
Status HTTP Response    502
Status Text    Proxy Error ( No data record is available. )
Duration Test Call    18895 ms
Technical Information (for support personnel)
Error Code 11004: Host not found
Background: This error indicates that the gateway could not find the IP address of the website you are trying to access, possibly due to lack of information in the DNS server.
Date: 2/07/2014 11:36:51 AM [GMT]
Server: adelisa001.originenergy.com.au
Source: DNS error
Thanks,
Pradeep G.

HTTPS communication

Hi,
I got a requirement where in I need to have HTTPS communication with one of my client. Basically I have to send files and receive files from their server.
Can anybody guide me what are the requirements my client should work for to support HTTPS communication and what type of adapter I should use to send and pick these files?
Regards,
Vijay.

HI Vijay
refer the below links
You can use the HTTP adapter. Refer to following SDN TV demo of the HHTP adapter for details steps involved into it.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
HTTPS using XMLSPY
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
The HTTPS configuration data of the Adapter Engines has to be configured in the SLD.
More Information in the "SAP Security Guide XI"
http://help.sap.com/saphelp_nw04/helpdata/de/f7/c2953fc405330ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
Under Security Check for Inbound Messages, you can specify which HTTP Security Level is to be assumed for incoming messages. You can choose from the following security levels:
○ HTTP (default value)
○ HTTPS without client authentication
○ HTTPS with client authentication
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Hope this will help you .....
pls reward if useful.....

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

HTTPS communication for Adobe Offline form with SAP ABAP WAS

Hi Experts,
Can we use HTTPS communication method to call a SAP ABAP Web Service from an Adobe offline form?
Example : I have a SUBMIT button in my Adobe offline form and when clicked, it populates a sales order number in the form.
Here my SAP ABAP server from where it reads the info is using HTTPS communication method. Now if i use the same service with HTTP it works fine but if i switch the service to use HTTPS it shows me an error "Error attempting to read from file. <https://FQDN/<service name> .
I am using self-signed SSL server certificate from SAP ABAP server. But here i also see a certificate error in my browser (IE 7.0) saying "Untrusted Certificate". Is this the reason for my above issue?
I could not find any post in SDN giving me the answer.
Regards,
Hobin

Hi,
The Certificates are already imported into the Trusted Certificates Section. But the real Issue is regading the Adobe Offline forms. If I open the Adobe Offline forms in the Adobe reader 9.0 and the Web Service call is made based on the Https:// . It saying "Error attempting to Read the file". The Fully qualified domain name is also provided VA. I have tried to import the certificates to Adobe Reader's - Trust Identities but still it is not working . If I switch the webservice authentication method to Http:// then it would work. ADS is already configured with SSL. And the HTTPS:// based WebService embedded in the Adobe Interactive Form is working ,if the form is Online in the Browser (integrated in the Webdynpro Abap UI element).
Is there any other way to Add SSL Certificates to Adobe Reader , so that Https:/ based webservice will work if the Form is opened in Adobe Reader 9.0.
Regards,
Hobs

Error during communication with System Landscape Directory: HTTP response c

Dear all,
I have redirected a SLD to our Q system. Everything in the Repository is working fine. What did I do:
- Adjusted settings in SLDAPICUST
- Adjusted SAPSLDAPI
- Adjusted LCRSAPRFC
- Adjusted the following values in the Exchange Profile:
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
So, SLDCHECK works fine.
The Repository sees the right SLD.
However, in the Directory I cannot choose an Adapter Engine (leaves blank) in my comm. channel.
Then I went to the RWB and got the following message:
Error during communication with System Landscape Directory: HTTP response code: 403 Forbidden
Where can I change something to make this work? Is this a user verification problem?
Thanks in advance for your input.

go through the notes :-
#764176 Error in XI due to inconsistent SLD contents
#720717 Reduce the number of System Landscape Directories
Regards
Kenny

HTTP Communication with iSoft eCommerce Suite

Similar Messages

Maybe you are looking for