HTTP Error 403 - Forbidden after deployed to Oracle Application Server

I hit HTTP Error 403 - Forbidden every time after I deployed my war file to my Oracle Application Server.
Any help?
Ming Man

Thanks, I got it works here:
Re: HTTP Error 403 - Forbidden
Ming Man

Similar Messages

  • OAAD Picture upload - HTTP Error: 403 Forbidden

    Dear forum,
    When trying to upload a picture for our Q/A HR system in tx OAAD I get the error HTTP Error: 403 Forbidden. However, I can do it with no issues in our prod environment. Anyone has an idea why this is? I have checked SICF and icman is enabled. Does anyone have an suggestion? Hence it isnt portal communication I cant use httpwatch, which most likely could have told me whats wrong.
    I hope someone is able to comment on this issue.
    Thanks in advance!
    Kind Regards,
    Soren

    Dear Friis,
    We have a steps of configurations that needs to be completed for the photo upload to be working. As you say the same is working in the production system, I hope you have the steps with you.
    Most common things that needs to be checked in this scenario are,
    1. HTTP service availability through the configured profile parameter in the system
    2. Restart after the profile parameter change
    3. Content Server node activation in SICF transaction
    4. User ID and Password to be mentioned in the SICF service as communications or system user
    5. Other checks for the content repository and the number range
    You can also try repeatedly, to upload the pic (in a JPG format) - because most usually the first trial ends in a failure for the HTTP service with a 403 Forbidden error message.
    Let me know your response and the steps you had followed for the config.
    Thank you
    Regards,
    Vineeth

  • Example Basicresponse: HTTP Error 403 - Forbidden

    Hi,
    i installed the developer edition of ocms.
    The eclipse plugin works fine.
    I was able to deploy the "thirdpartycallcontrol" and to access it via http://localhost:8888/tpcc.
    BUT
    the basicresponse example does not work. I can deploy it but on
    http://localhost:8888/basicresponse
    i get HTTP Error 403 - Forbidden
    Is this not accessible via webfrontend?
    How can i see if this is working? In the documentation the use case is missing....

    Hi HEWizard,
    Basicresponse is a SIP only application, hence it's not available via a web front end. It can be accessed via a test SIP testing tool such as sipp: http://sipp.sourceforge.net/
    Hope this helps,
    Adam

  • HTTP Error 403 - Forbidden on Cisco ISE and SCEP RA

    Dear Experts,
    We are in process of deploying ISE 1.2 in our environment for BYOD.
    The initial step of this process is to configure ISE as an SCEP Proxy and it requires certain configuration on the local CA. We have done all the required configurations on the local CA server.
    Now, when we try to connect ISE with the local CA using SCEP RA Profiles, it gives "HTTP Error 403 - Forbidden". The URL we are using is http://ipaddress/certsrv/mscep/mscep.dll.
    It seems that the local CA is not letting the ISE access the mscep.dll file. Now I dont understand how to allow ISE to access this file or the url. Please advise if there is any step by step process guide. Although, I have followed the ones from Cisco but it doesn't state how to give ISE the required rights for accessing mscep.dll.
    Thanks in advance.
    Jay

    Jay,
    You should use this URL:
    https://ipaddress/certsrv/mscep
    If you try to get the cert from an http address, you will get an error.  You should be using https.  Also, the mscep.dll should not be part of the URL.
    You can test this connectivity from any browser by putting that URL in the sddress bar.  You should see a page similar to this:
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • HTTP Error 403 - Forbidden Error Accessing Simplest Example

    If I follow the instructions for creating the SIMPLEST example in the "iFS Online Resources" document, everything seems to work until the very last step. When I click on one of my sample objects a new window is launched for the JSP, but it gets an HTTP-403 error in it.
    Anone have any ideas? Thanks.

    Strangely enough, we're having no problems viewing the XML case files from within the JSW interface, they call the InsuranceForm jsp without any errors - which would indicate that the Java beans are in the right place. Yes?
    The problem we're getting is trying to log into the iFS repository via the URL http://<iFS Server>/public/examples/insuranceApp/src/login.jsp
    as per the demo instructions, we get HTTP Error 403 - Forbidden. I checked the permissions on the adk.jar file as per Monty Burns posts, and it's world readable. What gives?
    We've installed the 1.0.8.3 patch and the 8.1.6.0.1 JDK. NT Server 4, SP6, 8.1.6 database.
    Thanks in advance for your help,
    Cheers
    Geoff.

  • HTTP Error 403 - Forbidden  error when auto including a jspx page

    Hi All -
    We have a situation where one of different reports pages gets included inside a main reports page based on user selection via a selectOneChoice control.
    But when the Reports Main page tab is clicked for the first time we get a "You are not authorized to view this page" HTTP Error 403 - Forbidden error.
    Upon clicking "Refresh" and then clicking the Reports Main page tab again, the page renders correctly.
    This is our code snippet. All the report related pages(MainPage.jspx, Schedule.jspx and Budget.jspx) are inside a reports folder under the context root. Please help.
    Thanks for your time.
    MainPage.jspx
    =====================
    Here I have a selection box, and based on the user selection I include different JSPX pages. The page Definition of this page
    contains all the executables and the bindings of the included pages also.
    <af:selectOneChoice value="#{backing_Reports.measureSelected}"
    label="Measure" unselectedLabel="Select One"
    id="selectmeasure" autoSubmit="true"
    immediate="true">
    <af:selectItem label="Schedule Data"
    value="Schedule.jspx"/>
    <af:selectItem label="Budget Data"
    value="Budget.jspx"/>
    </af:selectOneChoice>
    <af:panelGroup>
    <jsp:include page="${backing_Reports.measureSelected}" flush="true"/>
    </af:panelGroup>
    Faces Config:
    ===================
    <navigation-rule>
    <from-view-id>*</from-view-id>
    <navigation-case>
    <from-outcome>GlobalHome</from-outcome>
    <to-view-id>/pages/Welcome.jspx</to-view-id>
    <redirect/>
    </navigation-case>
    <navigation-case>
    <from-outcome>GlobalReports</from-outcome>
    <to-view-id>/reports/MainPage.jspx</to-view-id>
    </navigation-case>
    <!-- 1. Reports menu tab item -->
    <managed-bean>
    <managed-bean-name>menuItem_Reports</managed-bean-name>
    <managed-bean-class>cs.view.menu.MenuItem</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
    <managed-property>
    <property-name>label</property-name>
    <value>#{resources['scorecard.menu.reports']}</value>
    </managed-property>
    <managed-property>
    <property-name>viewId</property-name>
    <value>/reports/MainPage.jspx</value>
    </managed-property>
    <managed-property>
    <property-name>outcome</property-name>
    <value>GlobalReports</value>
    </managed-property>
    </managed-bean>
    :

    We have solved this, temproarily. But don't know if this is the best method to do this. Please post if somepne has a better way of doing this.
    While debugging we found that the ${backing_Reports.measureSelected} field which was set to a default value in backing bean was returned as null when the page renders for the first time. So we had a work around like this in our MainPage.jspx
    <af:panelBox width="80%" partialTriggers="selectmeasure"
    inlineStyle="margin:40.0px;">
    <af:panelGroup>
    <jsp:include page="${backing_Reports.measureSelected==null?'BlankPage.jspx':backing_Reports.measureSelected}"
    flush="true"/>
    </af:panelGroup>
    </af:panelBox>
    Thanks.

  • Deployment error while deploying to Oracle Application Server from JDEV

    What is the solution of this deployment problem???
    ---- Deployment started. ---- Jun 15, 2007 11:33:38 AM
    Target platform is Oracle Application Server 10g 10.1.3 (OracleAppServer).
    java.lang.ClassCastException: oracle.jbo.dt.jdevx.deploy.JbdProfileNode
         at oracle.jdevimpl.deploy.ProfileDeployer.profileDepExists(ProfileDeployer.java:95)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:144)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:167)
         at oracle.jdevimpl.deploy.DependencyGraph.deploy(DependencyGraph.java:72)
         at oracle.jdevimpl.deploy.ModulePackager.deploy(ModulePackager.java:44)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.J2eeProfileDt$CleanupTransientProfilesDeployer.deploy(J2eeProfileDt.java:71)
         at oracle.jdevimpl.deploy.FinalDeployer.deploy(FinalDeployer.java:48)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.runImpl(AsyncDeployer.java:67)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.run(AsyncDeployer.java:53)
    java.lang.ClassCastException: oracle.jbo.dt.jdevx.deploy.JbdProfileNode
         at oracle.jdevimpl.deploy.ProfileDeployer.profileDepExists(ProfileDeployer.java:95)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:144)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:167)
         at oracle.jdevimpl.deploy.DependencyGraph.deploy(DependencyGraph.java:72)
         at oracle.jdevimpl.deploy.ModulePackager.deploy(ModulePackager.java:44)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.J2eeProfileDt$CleanupTransientProfilesDeployer.deploy(J2eeProfileDt.java:71)
         at oracle.jdevimpl.deploy.FinalDeployer.deploy(FinalDeployer.java:48)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.runImpl(AsyncDeployer.java:67)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.run(AsyncDeployer.java:53)
    java.lang.ClassCastException: oracle.jbo.dt.jdevx.deploy.JbdProfileNode
         at oracle.jdevimpl.deploy.ProfileDeployer.profileDepExists(ProfileDeployer.java:95)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:144)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:167)
         at oracle.jdevimpl.deploy.DependencyGraph.deploy(DependencyGraph.java:72)
         at oracle.jdevimpl.deploy.ModulePackager.deploy(ModulePackager.java:44)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.J2eeProfileDt$CleanupTransientProfilesDeployer.deploy(J2eeProfileDt.java:71)
         at oracle.jdevimpl.deploy.FinalDeployer.deploy(FinalDeployer.java:48)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.runImpl(AsyncDeployer.java:67)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.run(AsyncDeployer.java:53)
    java.lang.ClassCastException: oracle.jbo.dt.jdevx.deploy.JbdProfileNode
         at oracle.jdevimpl.deploy.ProfileDeployer.profileDepExists(ProfileDeployer.java:95)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:144)
         at oracle.jdevimpl.deploy.DependencyGraph.calcDeploymentOrder(DependencyGraph.java:167)
         at oracle.jdevimpl.deploy.DependencyGraph.deploy(DependencyGraph.java:72)
         at oracle.jdevimpl.deploy.ModulePackager.deploy(ModulePackager.java:44)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.BatchDeployer.deploy(BatchDeployer.java:46)
         at oracle.jdevimpl.deploy.DynamicDeployer.deploy(DynamicDeployer.java:84)
         at oracle.jdevimpl.deploy.J2eeProfileDt$CleanupTransientProfilesDeployer.deploy(J2eeProfileDt.java:71)
         at oracle.jdevimpl.deploy.FinalDeployer.deploy(FinalDeployer.java:48)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.runImpl(AsyncDeployer.java:67)
         at oracle.jdevimpl.deploy.AsyncDeployer$1.run(AsyncDeployer.java:53)
    Warning: Exceptions occurred while traversing inter-profile dependencies.
    Warning: Attempting to continue with deployment anyway...Wrote EJB JAR file to D:\EBKProje\EBKv1.0.0.0\Model\deploy\ejb1.jar
    Running dependency analysis...
    Wrote JAR file to D:\EBKProje\EBKv1.0.0.0\Toplink\deploy\toplink1.jar
    Wrote WAR file to D:\EBKProje\EBKv1.0.0.0\UI\deploy\webapp1.war
    Running dependency analysis...
    Wrote JAR file to D:\EBKProje\EBKv1.0.0.0\ModelAdf\deploy\ModelAdfCSMT.jar
    Running dependency analysis...
    Wrote JAR file to D:\EBKProje\EBKv1.0.0.0\ModelAdf\deploy\ModelAdfCSCommon.jar
    Wrote EAR file to D:\EBKProje\EBKv1.0.0.0\BuildAndDeploy\EBK2.ear
    Configuration canceled
    Elapsed time for deployment: 1 minute, 26 seconds
    #### Deployment incomplete. #### Jun 15, 2007 11:35:04 AM
    Message was edited by:
    Cihangir Devrim

    A little more details on what you are trying to do will help.
    Which versions of JDev/OC4J? which technologies? did you install the ADF Runtime on the server?

  • Problems with the deployment to Oracle Application Server 9.0.2

    I am having a problem to deploy a simple JSC application to Oracle Application Server 9.0.2.
    I am getting an error:
    500 Internal Server Error
    java.lang.NullPointerException
         at javax.faces.webapp.FacesServlet.init(FacesServlet.java:144)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.loadServlet(HttpApplication.java:1687)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.findServlet(HttpApplication.java:4020)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2218)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:585)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    However i don't have any problems to deploy my applications to new release of Oracle AS 10g (9.0.4).
    Unfortunately we still work with the old version (9.0.2)of the Oracle AS.
    Any help will be greatly appriciated
    Thanks
    Yuriy

    I try it but cant deploy in less than 10g.
    AFAIR is an JRE version issue.
    I lost at least 2 days trying.
    Regards.

  • Deploy on oracle application server 10g

    Hello,
    i have the following question. i'm using jdeveloper 10.1.3 to develop a web application with an ejb3 (and i'm using jdk 1.5). when i run my application on "oc4j embedded", i can call my ejb with
    --> "SessionEJBRemote ses = (SessionEJBRemote) context.lookup("SessionEJB");"
    and when i deploy the .ear on oracle application server 10g from the IDE, i got the following error :
    "javax.naming.NameNotFoundException: SessionEJB not found".
    Can someone help me???
    Thanks (and sorry for my english I come from Switzerland)

    How do you try to connect to the application server within your test application?
    --olaf                                                                                                                                                                                   

  • Login error with correct u/p using Oracle Application Server / BPEL

    Hello,
    We are using Oracle 11g and BPEL 10.1.3.4. We had everything working fine until earlier this week. We were receiving an exception when accessing the database from our BPEL process.
    Unable to establish connection to "iCareConnectionPool". Error message: Exception occurred testing connection. Exception: java.sql.SQLException: ORA-01017: invalid username/password; logon denied.
    I went into the Application Server control and tested the data source and connection pool and they both failed with the login error. The userid and password being submitted is correct. I checked the data-source.xml file and the id/password looked good. Here are the steps I performed.
    On BPEL server:
    1)     Deleted connection pool iCareConnectionPool, data source, iCareDataSource, and removed /eis/db/iCareDataSource from the DBAdapter.
    2)     Created new connection pool – iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
    3)     The connection pool test was successful. Clicked finish to create connection pool
    4)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
    5)     Modified connection pool to use IDS2 and it worked.
    6)     Modified connection pool to IDS and it failed.
    7)     Modified connection pool to jimc and it worked.
    On Database:
    1)     Created new schema/user ICAREIDS
    2)     Connected using SQL Developer and I could connect
    On BPEL Server:
    1)     Deleted connection pool
    2)     Created connection pool iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
    3)     The connection pool test was successful. Clicked finish to create connection pool
    4)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
    5)     Modified connection pool to use IDS2 and it worked.
    6)     Created new connection pool TestPool – same results
    7)     Tried jdbc:oracle:thin:@//<host>:1521/ORCL - same results
    On my local system BPEL server:
    1)     Created connection pool iCareConnectionPool using jdbc:oracle:oci:@//<host>:1521/ORCL with userid IDS
    2)     The connection pool test was successful. Clicked finish to create connection pool
    3)     From the JDBC resources screen, I tested the connection pool and it failed with invalid logon error.
    4)     Modified connection pool to use IDS2 and it worked.
    5)     Modified connection pool to use ICAREIDS and it failed.
    Since it failed on two different BPEL server's, I am wondering if it is something with the database. I can connect using existing schema's but not IDS or any new schemas. However, I can connect to any schema using any other tool like SQL Developer.
    Can anyone provide an insight as to what could be happening here.
    Thanks,
    Jim

    I found the problem and wanted to pass on the solution in case any one else runs into this problem.
    With Oracle Database 11g the passwords are now case sensitive. Because the BPEL server is using 10g drivers the login fails if you have capital letters in your password.

  • HTTP Error 403 - Forbidden

    Hello
    We're getting this error message randomly when surfing the Internet. We have websense running on our network to perform web content filtering and are using the ASA for the http/https redirects. We've contacted websense and they said this error message is coming from the ASA, not their product.
    Does anyone have any ideas?
    Has anyone else seen this?
    ASA-5550
    version 7.2.4

    Here are the url filter statements we are have on our asa firewall.
    Is it recomended to use both longurl-truncate and cgi-truncate or is just using the cgi enough in this situation?
    Websense was recommending that we use the url-mempool option instead of using the truncate statements. Let me know your thoughts on what is the best way here. 
    filter url except 0.0.0.0 0.0.0.0 205.140.x.x 255.255.255.255
    filter https except 0.0.0.0 0.0.0.0 205.140.x.x 255.255.255.255
    filter url except 172.27.x.x 255.255.255.255 0.0.0.0 0.0.0.0
    filter url except 0.0.0.0 0.0.0.0 209.135.x.x 255.255.255.255
    filter url except 0.0.0.0 0.0.0.0 209.135.x.x 255.255.255.255
    filter https 443 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow
    filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow

  • Erreor when deploying in oracle application server

    Hi,
    I develop application using visual web pack + netbeans, it work fine with tomcat but when i want deploy it in our prod environment (Oracle ias) i have the following error:
    Base Exception:
    java.rmi.RemoteException
    deploy failed!: ; nested exception is:
    oracle.oc4j.admin.internal.DeployerException: Unknown assembly root-tag attribute: version. deploy failed!: ; nested exception is:
    oracle.oc4j.admin.internal.DeployerException: Unknown assembly root-tag attribute: version
    the oas version 10.1.2.0.2
    the same oc4j run application developed using java studio creator
    Walid

    I think SS work's only under Apache Tomcat
    I was try deploy SS 9.2.1 and 9.3.1 on Oracle iAS and Weblogic 9.2.MP1
    and have similar error.(- can't register planning application)
    But Planning and EAS on Oralce and Weblogic works fine .
    p.s. OiAS - it's closed product - use Weblogic for new ENV.
    If you need detaled instruction for setup - please read documentation
    http://www.oracle.com/technology/documentation/epm.html
    http://hack4essbase.wordpress.com/2008/08/07/weblogic-classpath-and-env-for-hyperion-planning/

  • Http error 403 while using servletrunner

    Hello Friends,
    I am getting the above mentioned error(Http error 403- forbidden) while trying to connect to servlet runner running at 8080 in my system. I downloaded jsdk2.0 and trying out some examples. Am I supposed to get a page once I try http://localhost:8080?
    Please respond ASAP
    Thank You All
    Santhosh

    have a look to the file web.xml in your webapps WEB-INF directory.
    here you have to define the servlets
    <servlet>
      <servlet-name>test</servlet-name>
      <servlet-class>your.package.YourServlet</servlet-class>
    </servlet>after having declared the servlet you could add a mapping - means an url expression which invokes your servlet:
    <servlet-mapping>
      <servlet-name>test</servlet-name>
      <url-pattern>test/test</url-pattern> <!-- OR */test.* OR ... -->
    </servlet-mapping>the way you used uses a default servlet invoker. means: if you enter /servlet/xyz the invoker will search for a ServletClass called xyz and invoke this servlet.
    depending on what server you use the url http://localhost:8080 will return the servers "welcomd page"

  • UPK - Player gives HTTP Error 403 error

    I have created a animation using UPK. A player.exe was generated. It was playing fine on my local drive but when I post it to shared interface it gives me this error -
    Contact localhost:3282 home
    HTTP Error 403 - Forbidden
    Internet Explorer
    Have anyone of you encountered this? Please help.
    Thanks

    Jay,
    You should use this URL:
    https://ipaddress/certsrv/mscep
    If you try to get the cert from an http address, you will get an error.  You should be using https.  Also, the mscep.dll should not be part of the URL.
    You can test this connectivity from any browser by putting that URL in the sddress bar.  You should see a page similar to this:
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • Oracle Application Server for SLES Linux error when install

    I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
    1. I install orarun package.
    2. Install patch 3167528 - remove entries from the "/etc/services"
    error when install - the OPMN process manager failed to start.
    I read opmn/logs: can't load shared library libdb.so.2...
    I check /usr/bin/libdb.so and found libdb-4.3.so
    I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
    I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
    how I can fix this error? help mee pls..

    I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
    Follow this Metalink Note      790943.1
    Greetings

Maybe you are looking for

  • Pse 7 slide show

    Hello Is it possible in pse 7 slide show to bring in more than one photo per screen shot ie like picture of Mom and Dad and then bring in smaller photo's of children on same slide. Roxy

  • How to change page header in mode_show_help?

    How can I change the page header on the page that gets opened by calling mode_show_help? I'd like to have the help pages maintain the consistancy of the look of the portal. thanks, adam

  • Cann't view technicla information of the field through t-code trip (HR)

    Hi all:       I want to get a field's name in transation trip, while press F1 like I used to in other traditional transations , a web page popped up but without the infromation about the field's name .       Would you please tell me how to achiceve t

  • Bring a windows program to the front

    I searched for this but didn't find anything that answered my question. Is it possible to control programatically which windows programs are at the front? So if I was running a vi (which is on top) and I needed to automatically bring a running window

  • AC3 Encoding with Compressor 2

    Hi all -- Anyone know why Compressor 2 won't convert my MPG audio streams to AC3? I demuxed an MPG-2 program stream to .m2v and .mpa elementary streams. The .m2v plays fine -- the .mpa must first be converted to 48kHz AIFF before Compressor will conv