HTTP-Receiver: Code page conversion error from UTF-8 to ISO-8859-1

Hello experts,
In one of our interfaces we are using the payload manipulation of the HTTP receiver channel to change the payload code page from UTF-8 to ISO-8859-1. And from time to time we are facing the following error:
u201CCode page conversion error UTF-8 from system code page to code page ISO-8859-1u201D
Iu2019m quite sure that this error occurs because of non-ISO-8859-1 characters in the processed message. And here comes my question:
Is it possible to change the error behaviour of the code page converter, so that the error will be ignored?
Perhaps the converter could replace the disruptive character with e.g. u201C#u201D?
Thank you in advance.
Best regards,
Thomas

Hello.
I'm not 100% sure if this will help, but it's a good Reading material on the subject (:
[How to Work with Character Encodings in Process Integration (NW7.0)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42]
The part of the XSLT / Java mapping might come in handy in your situation.
you can check for problematic chars in the code.
Good luck,
Imanuel Rahamim.

Similar Messages

Mail Sender - Encoding (I need to change from UTF-8 to ISO-8859-1)

Hi,
I'm getting data from email (in ms exchange) using the Mail Sender Adapter.
In the e-mails exists characters as ç (ccedil), ã (atilde), õ (otilde) and others. The XI cannot read this characters because the encode in XML is UTF-8.
How I do to change the encode in XI from UTF-8 to ISO-8859-1 ?
Thank you!

Unfortunately most mail server do not apply the codepage to the content type of a mail.
In this case you have to set the content type with help of the MessageTransformBean:
Transform.ContentType text/plain;charset="ISO-8859-1"
Regards
Stefan

Code Page Conversion Error

Hi,
I have a problem while downloading a file which is generated by a standard report program. The R/3 server runs on UNIX and the target system for the file download is Windows XP. When i try to download the file an error is displayed - 'Individual characters could not be converted from code page 4102 to Code P.1100'
Also when i see the file contents using the display option, all the characters are non-english characters (>> >>>>>>>>> etc)
Could some one help?
Thanks in advance,
Sandeep Joseph

Hi,
I set a parameter(DCP(Default Code Page)) in the system and gave the value as 4102 and now it works fine. Can anyone tell the reason why it was going wrong?
Thanks,
Sandeep

HTTP adapter - change encoding from UTF-8 to ISO-8859-1

Hi,
I am trying to change the encoding used by the HTTP sender adapter in a scenario.
However, when I enter ISO-8859-1 in the XML Code under XI Payload Manipulation on the comms channel it has no effect - the paylad still shows as UTF-8 in SXI_MONITOR.
Am I missing a step or entering the field incorrectly ??
Thanks
Colin.

Hi,
From help
Enhancing the Payload
Some external systems, for example, Web servers in marketplaces, can only process data if it is sent as an HTML form using HTTP.
A typical HTML form comprises named fields. When transferring a completed form to the server or a CGI program, the data must be transferred in such a way that the CGI script can recognize the fields that make up the form, and which data was entered in which field.
The plain HTTP adapter constructs this format using a prolog and an epilog. Therefore, there is a particular code method that separates form fields and their data from each other. This code method uses the following rules:
     Individual form elements, including their data, are separated from each other by the character &.
     The name and data of a form element are separated from each other by an equals sign (=).
     Blanks in the entered data (for example, in multiple words) are replaced by a plus sign (+).
    All characters with the (enhanced) ASCII values 128 to 255 (hexadecimal 80 to FF) are transcribed using a hexadecimal sequence, beginning with a percentage sign (%) followed by the hexadecimal value of the character (for example, the German umlaut ö in the character set ISO-8859-1 is transcribed as %F6).
   All characters that occur in these rules as control characters (&, +, =, and %) are also transcribed hexadecimally in the same way as high value ASCII characters
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Regards
Chilla

Change encoding from utf-8 to iso-8859-1 in JMS receiver!

Hi.
I have some problems regarding encoding.
The simple setup: dummy datatype as input, XSLT mapping and standard XI output(to JMS).
Are there any way to tell the JMS adapter to deliver the message in iso-8859-1 and not utf-8?
Regards Peter

> Hi Henrique.
>
> This sounds like an idea. Can you guide me to some
> documentation, that describes adding mapping in the
> jms adapter module?
>
> Regards Peter
To use modules in JMS adapter: http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Now, you add the MessageTransforBean module, to use the XSLT mapping. Check the end of this blog to learn how to use XSLT mapping on MessageTransformBean: /people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Regards,
Henrique.

Changing character encoding in ps xml pub. from utf-8 to iso-8859-1

I am using xml publisher to generate a report in a pdf format, now my problem is user has entered a comment which is not supported by utf but in iso-8559-1 its working fine,
I tried to change the encoding in people code, xml doc file ,schema and xliff file but still the old formatting exist,should I change somewhere else.
Following the error i get when trying to generate pdf:"Error generating report output: (235,2309)Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.".The parser is not able to recognise with utf-8 encoding.

I had the same issue. I created the xml through rowset and used string substitute function and its working.
Sample:
&inXMLDoc = CreateXmlDoc("");
&ret = &inXMLDoc.CopyRowset(&rsHdr);
&sXMLString = &inXMLDoc.GenFormattedXmlString();
&sXMLString = Substitute(&sXMLString, "<?xml version=""1.0""?>", "<?xml version=""1.0"" encoding=""ISO-8859-1""?>");
hope this helps!
GN.

Changing the xml encoding from UTF-8 to ISO-8859-1

Hi,
I have created an xml file in xMII transaction that I feed into a webservice as input. As of now, the data in the xml file is entirely english text (it would be changing to have European text soon). I gave the encoding as UTF-8.
I get an error on the webservice side(not xMII code) that the its not able to parse. The error is 'SaxParseException: Invalid 1 of 1-byte UTF-8 sequence). I know that an easy fix is if tI change the encoding to iso-8859-1.
But the reference document doesnot let me put anythign other than UTF-8. Even if I put <?xml version="1.0" encoding="iso-8859-1"?> as the first line, when I save it and open it back, i see <?xml version="1.0" encoding="UTF-8"?>
Is there any way to change the encoding? Or better still, anyway idea why this invalid sequence is coming from?
Thanks,
Ravi.

Hi Ravi,
We have encountered scenarios where we needed to take the <?xml version="1.0" encoding="UTF-8"?> out completely. As xMII was providing the Web Service, it needed a workaround.
In your case, it seems that you wish to pass it from xMII to an external Web Service provider. One option might be to pass the XML document as string.
Once you convert it to a string, it may escape all XMl characters (i.e. '<' into '<'). You could perform a string manipulation and remove the <?xml version="1.0" encoding="UTF-8"?> from the string. You may also need to play around with xmlDecode( string ) function in the Link Editor.
I would suggest that before you try this option, create a string variable will the contents, but without the <?xml version="1.0" encoding="UTF-8"?> and try assigning it to the input.
You may also wish to try a string variable that has <?xml version="1.0" encoding="iso-8859-1"?> as the first line. If this works, you should be able to perform string manipulations to convert your XML document into this modified string.
Cheers,
Jai.

Reverting from UTF-8 to ISO-8859-1

Hi,
i have a database installed in UTF-8, it´s a new instalation and the guides i had didnt mention any restrictions on characterset for the teams that were migrating.
Well the problem is some teams are moving some of their projects to the new server and can´t insert in a VARCHAR2 (3), for example the word "não".
My question is: Can i change the whole database to ISO-8859-1 instead of UTF-8 in order to have words like "não" inserted correctly? If so, is it a simple alter database or a more complicated operation?
Another question, is there any possibility of letting the database as is and make it work without expanding the fields value restriction?
Alx

You can't change a database character set from ISO-8859-1 to UTF8. You can only move from one character set to a strict superset, which doesn't apply here. The supported way to change the character set here would be to create a new database with the ISO-8859-1 character set, export the existing data, and import it into the new system. That assumes, of course, that all the existing characters have an ISO-8859-1 representation (characters like the Euro symbol or Microsoft's curly quotes do not).
By default, a VARCHAR2(3) allocates 3 bytes of space for data. That gets complicated when you use a multi-byte character set like UTF-8 where a character like 'ã' requires 2 bytes of storage. You can define the columns as VARCHAR2(3 CHAR) to allocate 3 characters of storage regardless of the character set. You can also set the parameter NLS_LENGTH_SEMANTICS to CHAR to make the default when you create a table that character rather than byte length semantics are set. Personally, if I'm creating a UTF8 database, I'd want to set NLS_LENGTH_SEMANTICS to CHAR.
Justin

Changing charset from UTF-8 to iso-8859-1

Hi,
I am deploying my web service in Weblogic Server 9.2.2.
The result is returned using encoding "UTF-8". How can I
alter this so that the result wil be returned using encoding "iso-8859-1"? Could some one help please?
Thanks in advacne
Mike

What's the source of the "generated content"? I think you'd be better off investigating how to get that source to generate UTF-8 content.
Changing the meta tag won't give you what you want, because it will cause all the accented characters (and anything else outside ASCII) that are entered directly in Muse to be handled incorrectly by the browser.

Switching from "UTF-8" to "ISO-8859-1"

Dear all,
I am using Designer 7.0 to create forms, where the content is sent back via eMail and, after review, imported to a wepage.
Due to multiple languages on the site, encoding="ISO-8859-1" is mandatory.
Unfortunately I am not able to generate a PDF which sends back data in xml-format in this encoding ... it is always "UTF-8" !?!
I tried to edit the xml source of the form directly but without any effect. May feeling is, that the whole form has to be saved in the ISO encoding but I don't know where to select this !
Any help greatly appreciated. Thanks in advance. Stefan.

XML files are almost always in UTF-8. Other encodings are not
recommended; most software only supports UTF-8 or UCS-2. So it seems
very unlikely Designer would have such an options.
Aandi Inston

Change encoding from utf-8 to ISO-8859-1

Hi
I have a problem with changeing the encoding of a text. The text is in utf-8, but when I try to send the text as mail with javax.mail and "text/html", Outlook doesn't want to display the right characters. Can somebody help me?

Hi,
String s = java.net.URLEncoder.encode(myText, newencoding)
http://galileo.spaceports.com/~ibidris/

Decode UTF-8 to ISO-8859-1

I am using the Google Maps API, it return in utf-8,
so for some countries, caracters are wrong,
My server is ISO-8859-1
So, how to convert the result from utf-8 to iso-8859-1 ?
I tried :
<cfprocessingdirective pageEncoding="UTF-8">
<cfcontent type="text/html; charset=UTF-8">
<cfset setEncoding("URL", "UTF-8")>
<cfset setEncoding("FORM", "UTF-8")>
and
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
No change. always the wrong caracters,
Thanks for any help with this mess.
Pierre.

I am using CF v7.
My server and CF are ISO-8859-1.
But I am using Google Maps API , which returns country names in UTF-8.
I tried the Google Maps directives, with adding parameter eo=ISO-8859-1 in the Google Key <script>,
same result.
Then I have to convert to ISO-8859-1 , at least in that page for country names.
(I have a specific problem with Thailande, Google Maps returns : Tha๏lande
and in the data base it writes : tha&#3663 ;lande (an Access database)
I answer to injun [576871] ,
Diificult to insert that code, because I am in a JavaScript code already.
So it will not accept <cfscript> again inside ? I will try.
Thanks for any help.
Pierre.

XML Encoding Issue - Format UTF-16 to ISO-8859-1

Dear Groupmates,
I have data in my Internal table which i am converting to XML using custom Transformation.
Data is going to third party.The third party system requires data in ISO-8859-1 Format but SAP is generating the same in UTF-16 Format.I have been able to change the format of file from
utf-16 to ISO-8859-1 format but after conversion i am getting invalid tag information in form of characters
like &lt , &gt etc..in my file.
Here is the code i have used to set the encoding to ISO-8859-1 :-
DATA: xmlout TYPE xstring.
DATA: ixml TYPE REF TO if_ixml,
streamfactory TYPE REF TO if_ixml_stream_factory,
encoding TYPE REF TO if_ixml_encoding,
ixml_ostream TYPE REF TO if_ixml_ostream.
ixml = cl_ixml=>create( ).
streamfactory = ixml->create_stream_factory( ).
ixml_ostream = streamfactory->create_ostream_xstring( xmlout ).
encoding = ixml->create_encoding(
character_set = 'ISO-8859-1' byte_order = 0 ).
ixml_ostream->set_encoding( encoding = encoding ).
Sample Output :-
<?xml version="1.0" encoding="iso-8859-1"?>
<AMS_DOC_XML_EXPORT_FILE><AMS_DOCUMENT AUTO_DOC_NUM="FALSE" DOC_CAT="CA" DOC_CD="CA" DOC_DEPT_CD="045" DOC_ID="XR10281060830400001" DOC_IMPORT_MODE="OE" DOC_TYP="CH" DOC_UNIT_CD ="NULL" DOC_VERS_NO="01">
<CH_DOC_HDR AMSDataObject="Y">
<DOC_CAT Attribute="Y"><![CDATA[CA]]></DOC_CAT>
<DOC_TYP Attribute="Y"><![CDATA[CH]]></DOC_TYP>
Please let me know if anyone has idea how i can get rid of the invalid tag information.
Thanks !
With Regards,
Darshan Mulmule

Darshan,
Did you get an answer for this question? We have same requirement to create XML file in ISO-8859-1 format with Attributes is set to "Y" and CDATA is being used for data.
Can you please let me know if you still remember how did you achieve it?
Satyen...

Codepage coverting error utf-8 from System codepage to iso-8859-1 (PI 7.1)

Hello Experts,
In our Prcess, we receive an Idoc from an IS-U system and then we send this Idoc with some Header-Information via http-Adapter to a Seeburger System.
In the outbound communication Channel we have a XI Payload manipulation with xml-Code iso-8859-1.
We get the Error: Codepage coverting error utf-8 from System codepage to iso-8859-1, and only for this Idoc, where othe similar Idocs runs correctly.
Is it possible, that the Idoc contains non-utf-8 chars so the error occurs?
PS: another XI in our landscape uses a http-Channel with the same configuration in a similar process, an it work, so guess the Problem is not in the communication channel.
thanks,
best regards

> Is it possible, that the Idoc contains non-utf-8 chars so the error occurs?
A would rather think, that there could be any non-iso-8859-1 character be in the IDoc. For example an czech or polish character.

Regarding code page conversions

Hi ,
I have a query on code pages in unicode evironment.
first of all sorry for big mail on my question
There were a couple of issues when we have upgraded from 4.7 to 6.0 . These issues were mainly in the code page conversions from one code page xxxx to yyyy and the dataset transfers.
the problem which im facing is trying to understand exactly what is this code page doing in the back ground and these multilingual conversions all about .
there is a custom code page that my client has made in his landscape and now in majority of the interfaces we need to handle the code based on this code page .
for ex in the open dataset statement we add legacy text mode code page p_code ignoring conversion errors message lv_message .
i see some of the characters especially scandinivian korean chinese and japanese giving some major problem during the file transfers to unix and ftp environment .
case 1.
now we are referring to a custom code page 9xxx . now take a character as ä , now when i write a transfer statement
with referene to this code page it is displaying as # in unix path.
now taking the hexa decimal value of this character if i search in the custom code page (tcode scp with the hexa value of such characters ) there is a value already present in this code page 9xxx, now when i have a value maintained why am i gettina a # in the unix server .. how to check the consistency /validity of this code page
case 2.
some hungarian characters like o with a tilt on top cause conversion error dumps during the transfer . again the code page has this hexa value in it .
why in this case the conversion from 4102(basically utf-16)
to code page 9xxx is failing . why it is calling 4102 in this case ?
ignoring conversion error bypasses this strange chars (cxsycodepage*dump) but how to hold the correct value at any point of time in the desired server i mean at last i need to transfer o with a tilt instead of a # .
Please give some in depth work around solution instead of some vague answers .
Will appreciate your effort and time for this .
Thnx much .
Br,
Vijay.

hi
I am facing same problem when reading the file from application server.It gives me short dump.Can u tell me how can i resolve the code page error issue.In dump analysis i am getting error "NOt able to covert code page '4110' to '4102'

HTTP-Receiver: Code page conversion error from UTF-8 to ISO-8859-1

Similar Messages

Maybe you are looking for