HTTP response (301 Moved Permanently)

I'm trying of provisioning the SPA Phones by HTTP. The problem is when the HTTP server answer with redirect response (301 Moved Permanently), the phone don’t request to the new location provided in the answer. My question is that: Do The SPA series support http redirection? And if is possible what parameters I need to set?1
Here is attached a trace.
Thank you in advance

A bug was entered for this issue on Oct 29 (301 failure during provisioning). Bug id CSCtj80646. It will be fixed in the next release. Thank you.

Similar Messages

FF5 does not show images that are 'moved permanently' (http response 301)

Our web app shows maps from OpenStreetmap. The webapp is secure, that is, is uses HTTPS. Now, IE complains horribly when the web page tries to load <img> via HTTP, because it's mixed content that that is considered baad.
So our webapp serves the images by responding via HTTPS with a 301 (moved permanently) to the real OpenStreetmap URL (with is HTTP). That fools IE to not complain.
Now, Firefox 5 suddenly does not show the map images AT ALL. This has worked beautifully with previous version (and all other browsers).
What's wrong?

I fixed the problem. (YAY!)
It was the way I embedded the files -- the Dreamweaver default does not work properly so I used the embed from this generator: http://www.bobbyvandersluis.com/swfobject/generator/index.html#alternativeContentHelp which now lets my navbar and swfobjects load properly. I also made sure that my slideshow (loader.swf) was set with wmode = opaque while the navbar is set to wmode = transparent. The div for the nav bar has z-index set to 5 while the div for the slideshow has z-index set to 1. Both have absolute positioning. I hope this helps anyone in the future that has trouble with overlaying flash (.swf) files.
Thanks for your reply and trying to help me solve this issue!

Error Message HTTP/1/1 301 Moved Permanently

I received Message: HTTP/1.1 301 Moved Permanently when I
clicked Publish to publish course as a zip / PENS file. This
message came toward the end of the process. I am using Adobe
Captivate 3. What does it mean?
sglc

Actually, I had previously published the course to the
Desktop - but made some changes to the course, so I wanted to
update the already published file by publishing it again to the
same file. I got a message that the "already exists" and clicked to
acknowledge that I wanted to replace the file with the revised
course. I did not move the file or rename it.
The problem is that I have not received any confirmation that
the file (.zip) was replaced by the revised file - as the process
ended when I received the messge HTTP/1.1 301 Moved
Permanently.

Getting error: (301)Moved Permanently when invoking partner link

Hello,
I've set up and tested a web service that will execute a command on a host. I then built a BPEL process that invokes this web service as a Partner Link. However, I always received the following error when running the BPEL process:
Invoke_Host (faulted)
[2005/11/04 14:17:57] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>HTTP</code>
</part>
<part name="summary">
<summary>when invoking endpointAddress 'http://web398.xxx.com:7780/itas/ws/host', (301)Moved Permanently</summary>
</part>
<part name="detail">
<detail>AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultString: (301)Moved Permanently faultActor: faultNode: faultDetail: {}:return code: 301 {http://xml.apache.org/axis/}HttpErrorCode:301</detail>
</part>
</remoteFault>
Has anybody seen this error message? Any suggestions for finding out what's going on here?
Thanks

This is a standard HTTP error code, I am not sure what it means exactly, but maybe a network specialist can make sense of it.
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
10.3.2 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Request-URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 301 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after
receiving a 301 status code, some existing HTTP/1.0 user agents
will erroneously change it into a GET request.

Firefox 4 won't load Google-related Pages (e.g., iGoogle; Gmail) - Shows "301 Moved Permanently"

Firefox 4 won't load any Google-related pages for me. The only exception is that sometimes I can use Google search, otherwise no other Google-related pages load.
For many other sites, I receive either a "301 Moved permanently" or a "302" error message. I disabled ALL of my plugins to see if this would help; however, the pages continue to fail to load.
Any ideas on what's going on or what I can do to fix this? Otherwise, I am switching browsers!

I was having an issue with gmail after upgrading to FF4. Trying to load gmail, FF kept asking to save a file of type application/binary. The file itself was a .part file. Not sure what all this was about, but I deleted all gmail related cookies and gmail loaded and ran fine after that.

HTTP Response Status Codes: GET (retrieve), POST (create), PUT (modify), and DELETE (REST, Bulk, Any API)

Many of us, who are starters, starting to wonder when reading any API documentations or starting out with your first program built to make any of the API calls, what do all error codes means, when I get many different types of response from running the program/script. The only reason I thought about sharing this is because I know how motivation plays a key role when dealing with Eloqua platform and building components on top. This extends the functionality beyond what is already out of the box.
I put together a table that explains these in details. I hope you can benefit in resolving issues as you venture in your journeys. This is a very common chart that can be seen across many platform REST APIs. Idea was to have it here because the audience are not always the same.
Response Code
HTTP Operation
Response Body Contents
Description
200
GET, PUT, DELETE
Resource
No error, operation successful.
201 Created
POST
Resource that was created
Successful creation of a resource.
202 Accepted
POST, PUT, DELETE
N/A
The request was received.
204 No Content
GET, PUT, DELETE
N/A
The request was processed successfully, but no response body is needed.
301 Moved Permanently
GET
XHTML with link
Resource has moved.
303 See Other
GET
XHTML with link
Redirection.
304 Not Modified
conditional GET
N/A
Resource has not been modified.
400 Bad Request
GET, POST, PUT, DELETE
Error Message
Malformed syntax or a bad query.
401 Unauthorized
GET, POST, PUT, DELETE
Error Message
Action requires user authentication.
403 Forbidden
GET, POST, PUT, DELETE
Error Message
Authentication failure or invalid Application ID.
404 Not Found
GET, POST, PUT, DELETE
Error Message
Resource not found.
405 Not Allowed
GET, POST, PUT, DELETE
Error Message
Method not allowed on resource.
406 Not Acceptable
GET
Error Message
Requested representation not available for the resource.
408 Request Timeout
GET, POST
Error Message
Request has timed out.
409 Resource Conflict
PUT, PUT, DELETE
Error Message
State of the resource doesn't permit request.
410 Gone
GET, PUT
Error Message
The URI used to refer to a resource.
411 Length Required
POST, PUT
Error Message
The server needs to know the size of the entity body and it should be specified in the Content Length header.
412 Precondition failed
GET
Error Message
Operation not completed because preconditions were not met.
413 Request Entity Too Large
POST, PUT
Error Message
The representation was too large for the server to handle.
414 Request URI too long
POST, PUT
Error Message
The URI has more than 2k characters.
415 Unsupported Type
POST, PUT
Error Message
Representation not supported for the resource.
416 Requested Range Not Satisfiable
GET
Error Message
Requested range not satisfiable.
500 Server Error
GET, POST, PUT
Error Message
Internal server error.
501 Not Implemented
POST, PUT, DELETE
Error Message
Requested HTTP operation not supported.
502 Bad Gateway
GET, POST, PUT, DELETE
Error Message
Backend service failure (data store failure).
505
GET
Error Message
HTTP version not supported.
Hope this helps. Original post: REST API Status Codes and Complete REST API Tutorial with Status Codes.
Thank
Amit

Hi, I am trying to PUT to update contact info and I get following error:
2015-01-16 11:00:17,970 INFO [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(97) | accessHttpsPut.url=https://secure.eloqua.com/API/REST/2.0//data/contact/7606838, text={"id":"7606838","accountName":"openIdStr001","emailAddress":"[email protected]","type":"Contact"}
2015-01-16 11:00:18,931 ERROR [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(140) | ClientProtocolException
org.apache.http.client.HttpResponseException: Request is malformed.
Is there any idea?
Thanks so much.
Sincerely.

Check standard HTTP response code for 301

Hello, EveryBody, I have an error when i deployment a sao project ,
[11:26:11 AM] Deploying profile...
[11:26:11 AM] Wrote SAR file to C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Deploying sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] Processing sar=/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Adding sar file - C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Preparing to send HTTP request for deployment
[11:26:11 AM] Creating HTTP connection to host:crmserver, port:7001
[11:26:11 AM] Sending internal deployment descriptor
[11:26:11 AM] Sending archive - sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Received HTTP response from the server, response code=301
[11:26:11 AM] Problem in sending HTTP request to the server. Check standard HTTP response code for 301
[11:26:11 AM] Error deploying archive sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] HTTP error code returned [301]
[11:26:11 AM] No error message is returned from the server.
[11:26:11 AM] #### Deployment incomplete. ####
[11:26:11 AM] Error deploying archive file:/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I user soa version 11.1.1, jdevelop 11.1.1, everybody who tell the answer,
thank you very much!

I try http://fujiulnsd3t:8001/soa-infra and get the following information.
===========================================================================
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.2.0 - 11.1.1.2.0_091103.1205.1216 built on Tue Nov 03 13:48:58 PST 2009
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 (10.3.2.0)
There are no composites deployed to the platform

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

Received HTTP response code 500 : Timeout

Hi All,
I have done the File to JDBC to File(Sync) with module concept. Every thing is working fine in Dev system, yes'day it was moved to Quality System while i am trying to test i am getting the error in Sender File communication chennal.
Error: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
I have chaged the SQL statment to fetch only 50 records at that time its working fine with out any error.
While i am trying to collect 40,000 records its failing generally in Dev it use to take 4 to 6 min to gereate file.
Pls let me know do i need to chage any paramaters in Visual admin.
I have observed cm/keep_alive_timeout =60 (sec) but in dev the time is more? is this causing the problem?
I DEV system i don't have any issues the scenario is working fine.
Thanks,
Venkat.

Hi,
Yes..you should increase the icm/keep_alive_timeout.If you increase the time then until the connection will wait for the response. For more details..
[http://help.sap.com/saphelp_nw70/helpdata/EN/0b/1c7e7abbc311d5993a00508b6b8b11/content.htm]
Regards,
Prakasu.M
Edited by: prakasu on May 13, 2009 6:31 PM

Scheduled report failures - Unexpected error getting the HTTP response

Getting this error when scheduled report executes:
Unexpected error getting the HTTP response stream while generating report: http://cdmdb1c.nam.nsroot.net:4889/em/console/reports/render

Hi..
Thanks for the comment.
Below is how my web.xml entry looks like.
The requirement is to send a 404 error response and that will be handled by a servlet which inturn writes the output to the response object.
     <servlet>
          <servlet-name>ErrorPageServlet</servlet-name>
          <servlet-class>com.test.ErrorPageServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>ErrorPageServlet</servlet-name>
          <url-pattern>/error</url-pattern>
     </servlet-mapping>
     <error-page>
          <error-code>404</error-code>
          <location>/error</location>
     </error-page>>>
the first option to turn off the "show friendly html error pages" works fine.
It would be better if I can get a different solution

Deploying simple HTML page to WLS 10.3.6 fails with HTTP response code: 502

- I created a simple HTML page and want to test deployment to WLS 10.3.6 on Linux. I created WAR file and when using JDev 11.1.1.4.0 to deploy to WebLogic Server, it fails to deploy. Full errors/messages are:
[04:40:56 PM] ---- Deployment started. ----
[04:40:56 PM] Target platform is (Weblogic 10.3).
[04:40:59 PM] Retrieving existing application information
[04:40:59 PM] Running dependency analysis...
[04:40:59 PM] Building...
[04:40:59 PM] Deploying profile...
[04:40:59 PM] Wrote Web Application Module to C:\JDeveloper\mywork\Simpe_HTML\Project1\deploy\SimpleHTML.war
[04:41:01 PM] Deploying Application...
[04:41:01 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\NGOLDR~1.LAT\LOCALS~1\Temp\SimpleHTML.war' for the application 'SimpleHTML' could not be loaded to the server 'http://dupe:7031/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 502 for URL: http://dupe:7031/bea_wls_deployment_internal/DeploymentService
[04:41:01 PM] See server logs or server console for more details.
[04:41:01 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\Simpe_HTML\Project1\deploy\SimpleHTML.war' to 't3://dupe:7031'
[04:41:01 PM] #### Deployment incomplete. ####
[04:41:01 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
- The Application Server connection is accessible within JDev. 'dupe' is my server name and it's running RH 5.4
- Any help or suggestions appreciated, although I've already asked Mr. Google without success.
Thanks in advance,
Neville

HTTP response code 502 means temporarily overloaded.
I would say that we have to check the deployment error on the weblogic server logs located at <Domain_Home>\servers\dupe\logs\dupe.log
Check for any errors like OutOfMemory etc OR any deployment failures.
If possible, try accessing the console at http://dupe:7031/console
Check if you are able to successfully deploy your application using the console.
From the error it looks like the "dupe" server might not be healthy. So, the log file would really help here to get clues into the root cause.
Arun

Windows Azure Pack - Server returned HTTP response code: 500 error while accessing the public tenant API

Hi,
We are facing the following error while trying to access the given Windows Azure Pack Public tenant API to query the virtual machines list along with network adaper details -
java.io.IOException: Server returned HTTP response code: 500 for URL: https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10000&$skip=0
The response is proper when we access the following URL -
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines
Only on adding the $expand=VirtualNetworkAdapters, url parameter we are getting the above error.
Where can we check for the error logs on the Azure Pack server ? We checked for the logs using Windows Event Viewer but did not find any for the public tenant API.
What should be the cause for such an error and how can we fix this to get the proper data?
Thanks in advance.

Yes, we tried this, $top=10&$skip=0 works for the following url
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$top=10&$skip=0
It is only when we add $expand=VirtualNetworkAdapters,
the server returns the mentioned error response -
URL for which the server returns the 500 error -
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10&$skip=0
Can
you point to the error logs for Windows Azure Pack and SPF ?

Unable to deserialize HTTP response content - SharePoint Designer Call Web Service Workflow Activity

I am creating a workflow using SharePoint Designer 2013 and I'm using the call HTTP web service action.
The web service call works (it is for a text messaging service, and I get the text message to my phone) however the workflow stops at this point with internal status "suspended" and gives the error message below when clicking on the "i"
icon.
I have tried setting the Accept and Content-Type request headers to "application/json; odata=verbose" (minus the quote marks) as other posts suggested but this doesn't make a difference (e.g. here: https://social.msdn.microsoft.com/Forums/windowsapps/en-US/f0b18411-87d1-466b-aab0-1a0093605ed4/workflow-cannot-read-json-after-latest-sp15-patches?forum=sharepointdevelopment).
I tried adding in the Content-Length header too but that made no difference.
I tested calling another web service (https://sharepointurl/_api/contextinfo) and this works fine.
Is there any way to get the workflow to accept this XML as the response? I don't actually really need anything out of the response content, but I do need the workflow to carry on after this step and carry out other activities after this call.
Error message:
Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.IO.InvalidDataException:
Unable to deserialize HTTP response content. Expected ContentType : 'application/json', 'text/plain' or 'text/html', Received ContentType : 'text/xml'. Content (truncated) : '<?xml version="1.0" ?><outbound-message-delivery messageId="35d60bd2-a829-4382-8189-7a74de2d1cca"
isError="false"><recipient msisdn="6427xxxxxxx" isError="false"></recipient></outbound-message-delivery>'. ResponseStatusCode : 'OK' Request Uri : 'https://www.txtserviceurl.co.nz/api/3/sms/out?to=6427xxxxxxx&body=test+from+workflow'
at Microsoft.Activities.Messaging.SendHttpRequest.OnReceiveResponse(NativeActivityContext context, Bookmark bookmark, Object value) at System.Activities.Runtime.BookmarkCallbackWrapper.Invoke(NativeActivityContext context, Bookmark bookmark, Object value)
at System.Activities.Runtime.BookmarkWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager) Exception from activity SendHttpRequest HttpPost Switch<String> Sequence Microsoft.SharePoint.WorkflowServices.Activities.CallHTTPWebService
Stage 1 Sequence Flowchart Sequence Testing

Hi,
Thank you for your post.
I'm trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Best Regards，
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

HTTP response does not contain a valid XML root tag

I am running into an error in my trace portion of my XML when executing my application. The error is "HTTP response does not contain a valid XML root tag". The HTTP request is successful with message 200 so it seems to be accepted by the Integration Engine. I looked for other posts on this error and only found one and it didn't show the resolution. Any help would be appreciated.

Hello
Check these notes (do you use a split mapping?):
1) 1515230 XI mapping: "Root tag missing" in split mapping
2) 1640553 XI mapping: Split mapping: error Missing_Interface
Regards
Mark

2013 Exchange, Can't connect to Exchange Management Shell. It cannot determine the content type of the HTTP response from the destination computer.

The following error occurs.
         Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #0:
Did you know that the Identity parameter is a "positional parameter"? That means you can use:
Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
It's a neat usability shortcut!
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
   gTransportException
    + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
+     $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.: mail1.dorothy.local
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
   gTransportException
    + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Randy Cheek

Good Morning,
Log into the server with an account that has appropriate Exchange rights, not a local account.
Note: By default - Domain Admins don't have Exchange rights.
Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
My Technical Blog: http://thelifestrategist.wordpress.com
Discipline is the Difference between Goals and Accomplishments
If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer"

HTTP response (301 Moved Permanently)

Similar Messages

Maybe you are looking for