HTTP server download/install problems
This experience so far has been so awful, I hopt there's a fundamental problem, like I'm trying to download from the wrong place or something.
I want to set up a Solaris HTTP server to serve up my portlets. I tried downloading the HTTP server from http://download.oracle.com/otn/solaris/apache/apache0921_solaris.tar. Most of the time, I get a timeout error when clicking the link. Once I actually got a download, but when I untarred the file (tar xvf apache0921_solaris.tar), I got a directory checksum error. I also got lots of files and directories, but it's not obvious what to do with them. Do I even have the right download? Is there a more responsive server I can use to try the download again?
null
Todd,
Thank you for pointing out the problem with the Solaris download of the Oracle HTTP Server. We have placed a new file on OTN and I have tested that it downloads and extracts okay. The file is larger than the previous version, so it will take longer to download. Please go ahead and try the new file.
http://download.oracle.com/otn/solaris/apache/apache0921_solaris.tar
Thanks again,
Sue
Similar Messages
-
Cannot find 11gR2 HTTP Server to install
I've recently upgraded a database from 10gR2 to 11gR2, and everything is working fine. However, a new project has come up that requires APEX, and I can't find any HTTP server in my ORACLE_HOME. I'd be happy enough to install it, but I can't locate the installation media to download. I've downloaded database_1of2, database_2of2, gateways, grid, client, and examples from the [OTN 11gR2 download page|http://www.oracle.com/technology/software/products/database/oracle11g/112010_linx8664soft.html], but I don't find any "install HTTP server" options in the installers. Other posts refer to the Companion disk on 11gR1 and 10g, but I've not found a corresponding companion disk download for 11gR2.
I skipped whatever HTTP server option I may have been presented with when I installed 10gR2, so there has never been an HTTP server on this machine.
I'm confident that I can install it, if only I could find it. I'd be most appreciative if somebody can point me in the right direction.
Thanks -
Wallyuser12088340 wrote:
Anyone have solved problem yet? I am searching the Oracle HTTP Server is installed in an Oracle home after Oarcle 11gR2 is installed. Where is Oracle HTTP Server? Thank you very much.
SumeiIt is no longer included in the database download.
If you really want the HTTP server, you need to download that from the Oracle Fusion Middleware downloads. http://www.oracle.com/technology/software/products/middleware/htdocs/fmw_11_download.html and look for Web Tier Utilities (11.1.1.2.0)
I have not investigated the license considerations of this. Let us know what you find. -
Problems installing htmldb 2.0, totally new db/http server/htmldb install
I grabbed the new version of htmldb 2.0 and followed the install instructions that came with the htmldb 2.0 seperate download file. The scripts run fine etc. Evrything at default with default example db - orcl. But at a certain point I need to configure:
This is after the htmldb script has run and you need to configure the http server,
marvel.conf - I have not such a file in my Apache directory
dad.conf - really not clear what and how I need to change the values, no explination found either.
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword htmldb
PlsqlDatabaseConnectString localhost:1521:htmldbdv ServiceNameFormat
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
What to use for the PlsqlDatabaseConnectString localhost:1521:htmldbdv ServiceNameFormat ?????
I'm running a windows xp box. And the db and companion disc used are the latested found on OTN.
The instructions state that you use the following url as login:
http://hostname:port/pls/database_access_descriptor/
I don't get anything but an 404.
Completely lost. HELP!
Cheers
Message was edited by:
10G-Newbie
Message was edited by:
10G-Newbie
Message was edited by:
10G-Newbie
Message was edited by:
10G-NewbieI managed something, changed the PlsqlDatabaseConnectString to
PlsqlDatabaseConnectString 192.168.2.2:1521:orcl SIDFORMAT
When I now browse to the http://192.168.2.2:7777/pls/htmldb I see the login page, but how and with which credentials do I log in? Here is my dads.conf setup:
Alias /i/ "C:\oracle\product\10.2.0\db\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername test
PlsqlDatabasePassword oracle
PlsqlDatabaseConnectString 192.168.2.2:1521:orcl SIDFORMAT
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
I see no pictures, I think the Alias is oke, but maybe I'm missing something
Cheers -
Oracle HTTP Server download bandwidth limited on Windows 2003 Server
Hi,
we have an ApEx application with the following configuration on the server:
OS: Windows 2003 Server 64Bit
DB: 10.2.0.3 64bit
HTTP Server: the one that comes on the companion CD of Oracle DB 10g 32 bit
and after the bandwidth in the datacenter where the server resides was increased, I discovered a problem related to the server download bandwidth. I found on Metalink a Note [568075.1 - HTTP Server File Download Speed Is Slow |https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=568075.1] , but unfortunately not a very clear resolution given the fact that we use Oracle DB SEOne, so options 1 & 2 will involve additional licenses costs.
I tried option 3 suggested in the note by using the HTTP Server that comes with 11g (I assume this is a supported configuration also from licenses point of view HTTP Server from 11g on top of Oracle DB 10g) and I got a boost in performance but the bandwidth is still 70% compared to the bandwidth I get when downloading from the IIS on the same server.
Has anyone went through this exercise and found a solution for fully using the server bandwidth without needing to go for option 4 in the note, using Linux :), as in our case this will involve again additional licenses and/or hardware costs as the HTTP Server that comes with the DB has to be installed on the machine where the DB is installed?
Thanks in advance,
FlorinOoops ... things like this happen with Oracle Support, no answer?
Can you tell me anyway the SR number or the SR title so that I can write it in the SR I make? Like that maybe Oracle Support will work harder on the case, as there are more customers hitting the same problem.
Anyway in the meanwhile, I run some tests with the original Apache and this one works like a charm even in Windows 2003 Server. What remains now to be done is to use the Open Source Apache as proxy to the HTTP Server, as it looks like it handles much better the static content, it supports also mod_gzip or mod_deflate, but does not support mod_plsql :(. So I think the combination of the two: will do the work for me, but it is really a pity that I have to configure 2 web servers because the HTTP Server has flaws in it :(. Hopefully these will be fixed soon -
Download / Install problem.
To start with When installing and running creative cloud. After signing in to my account, i never got the EULA to appear.
The program opened, but the home tab never shows anything but a loading icon (circle of dots rotating)
I eventually get the apps tab to show the apps. I can even click to download.
I'm having issues getting any program to download / install on creative cloud. I don't get any errors or any sort of pop up indicating a problem.
What I am getting is through the process to random points, the "%" turns to "extracting" Then nothing more. It just hangs there forever, never doing anything else. on the right side where the download progress bar is, it just says waiting. It does this for all programs i try.
I'm in dire need of getting this problem resolved. I need the software for my classes. Which started today. Any help at all would be awesome. Thank you in advance.
my system specs are:
Windows 7 home premium 64-bit
Pentium dual-core @ 3.33GHz
4.09GB of memory
Direct x 11
Nividia GeForce GT 610
3.79Gb VM
Display 1680x 1050 32bit 60hz % 2nd display 1280x1024 32bit 60hzWindows spinning wheel https://forums.adobe.com/message/5853430
and
Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
Some download & install troubleshooting links
-Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088 -
Oracle and http server to install apex
Dears,
My old configuration was a solarisx86 (installation : 10202_database_solx86 ,10202_companion_solx86).
I would like to install a new version of apex on a node of a cluster HP UX.
Could someone tell me what and where can i find an oracle 10 compatible apex and and http server for this?
thanks in advance.
Celio[10g Release 2 downloads on OTN|http://www.oracle.com/technology/software/products/database/index.html]. (Can't be more specific than this because you haven't identified your flavour of HP-UX.) Oracle HTTP Server is on the Companion CD.
-
Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2
Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
LogA few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running. -
Failed to start HTTP server while installing companion CD
Hi all,
I am installing apex 3.1.2 (though it is old version, clients are still using it :) ), on the oracle 10.2.1 database. I am installing HTTP servers from the companion CD and getting error while starting HTTP server from the configuration assistant. I am getting following error.
==================================
Configuration assistant "Starting HTTP Server" failed
The "/u01/app/oracle/product/10.2.0/OHS/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
===============================
Can someone help me to resolve this issue please. Thanks.
SHYwhat you get if you do
envThis is what I got:
[cder@localhost ~]$ env
SSH_AGENT_PID=2451
HOSTNAME=localhost.localdomain
DESKTOP_STARTUP_ID=
SHELL=/bin/bash
TERM=xterm
ORACLE_OEM_JAVARUNTIME=/opt/jre1.3.1_19
HISTSIZE=1000
GTK_RC_FILES=/etc/gtk/gtkrc:/home/cder/.gtkrc-1.2-gnome2
WINDOWID=46156483
USER=cder
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=abc
GNOME_KEYRING_SOCKET=/tmp/keyring-TXq65G/socket
ORACLE_BASE=/opt/cder
SSH_AUTH_SOCK=/tmp/ssh-jIzDib2410/agent.2410
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-unix/2410
MAIL=/var/spool/mail/cder
DESKTOP_SESSION=default
PATH=/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/cder/bin:/opt/cder/920/bin
GDM_XSERVER_LOCATION=local
INPUTRC=/etc/inputrc
PWD=/home/cder
LANG=en_US.UTF-8
GDMSESSION=default
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/home/cder
SHLVL=2
GNOME_DESKTOP_SESSION_ID=Default
LOGNAME=cder
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-tUjeCInKxU,guid=10799645c34fdd03d15a0eb6d3376100
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/opt/cder/920
G_BROKEN_FILENAMES=1
COLORTERM=gnome-terminal
XAUTHORITY=/home/cder/.Xauthority
_=/usr/bin/env -
Can the database cache be installed w/ 9ias http server only install
The 9ias 1.0.2.2 db cache is offered as an option only with the Enterprise install. This a 4.32 GB installation most of which I don't require like Forms, Reports, Discoverer etc.
Is there a way for me to install just the 9ias http server and the db cache??
Note, in the Enterprise install, even though you are given the option to deselect components , it has no effect. The installer still goes ahead and installs all the components.For Http Server without any other components, you can go for
Core Edition of iAS10221 & during installation deselect
Oracle9iAS Web cache from Component Configuration & Startup
screen. -
Trex 7.0 Release 50 HTTP Server red light problem
I have read most of all the messages around the http server.
My scenario is this:
Windows Host 32 bits
Trex 7.00 release 50 installed.
IIS 6.0
Aditional instances on the host : Solution Manager and Saprouter.
The http://host:port:/TREXHttpserver/TREXISAPIExt.dll?CMD=PING has never responded to me. I always get a the message Internt explorer cannot display the webpage.
I have manually created the application, the web site and the virtual directory. I have checked all the rights in the NTFS , Registry and Policy and they are all correct.
But i never get the cmd ping to get it work. Of course in the Services of the trex console the http server is always red.
Any ideas?
PD: I have created a case with SAP, but still no good.Hi Daniel,
your issue possibly also solved by this new thread?
[IIS TREX|IIS TREX]
Best, Karsten -
Illustrator CS5 download/install problem
I used the Adobe Licensing sytem to retrieve Adobe Design CS Std5.5 at work. I was able to download and install InDesign, Photoshop, Bridge, etc just fine. But with Illustrator, it would download and create the CD icon but the folder doesn't contain anything to install. There is a PDF read me file and a folder with fonts. No icon to actually install Illustrator like with the others. I've re-downloaded it several times and it is exactly the same. Help!
Have you checked Adobe download help? http://helpx.adobe.com/download-install.html
-
HELP - SQL Server Express Install Problems
The SQL Server Express completed without error. However, when I tried to connect to the SQLEXPRESS instance I received one of those wonderful MS errors, "Specified file not found". WHAT FILE? (After all these years MS still can't figure out how
to give an error msg. that provides some hint of what's wrong.) Going on, I started the install console and selected the REPAIR option. (It didn't ask what the problem was, it just ran.) It did ask what instance needed repair. I told
it SQLSERVER. It proceeded to repairing it. My first hint that their repair function worked as well as their error handling was when I got the: That share name has already been used (or something like that) error (notice, MS didn't tell me what
share name, or what aspect of the db they were talking about). After pressing OK, the REPAIR function proceeded to run to completion. When I reviewed the REPAIR report I found that three db processes all had the same SHARE NAME ALREADY USED error.
Actually, I thought that it was no big deal. If this was a real REPAIR, it shouldn't matter that the name was already used because everything else should be the same. (I know I'm nigh eve about the
Intricacies of SQL server.) After repairing my installation, I brought up the SQL Server Management Console again. This time, it did not display SQLEXPRESS in the Connect field. I selected the drop down list arrow to see if it was
listed and the list was blank so I entered SQLEXPRESS in the connect field and clicked on the CONNECT button. I got a NETWORK PATH NOT FOUND error. So, before I really mess things up, I thought I should ask if anyone knows what I should do
next. (As an aside, I've pressed the MS Error Message HELP button numerous times abut various errors I've received over the years. Not only are MS error messages useless, their Help Page has never ONCE been able to provide any information
about the encountered error. MS should spend some time and develop some truly helpful error messages as "File not found" and unknown error code 837289 are absolutely useless and especially since their HELP PAGE is never able to provide any
information either. I do wonder how I can get Unknown Error codes from people who wrote the code that raises the error. Don't they document anything?)I did read the requirements and made sure I met them all. The install package I used was: SQLEXPRADV_x64_ENU.exe. You're correct. I'm not familiar with SQL Server.
I downloaded SQL Server Express and Visual Studio Express to learn and explore because I wanted to learn about the new technology.
After leaving my message, I did some more studying and playing with the system. I managed to figure out that I had to turn on the data base service before I could connect with it. I'm sorry, I don't understand how Microsoft could install a data
base system without turning on its services. Why would I want to install something and NOT use it? The default should be ON and the setup manager should provide a choice to set it to OFF on the configuration page.
My experience is rather dated. I had to retire due to a disability in 2005. I couldn't control my arms and hands. The doctor recently tried a medication again that I had had a severe negative reaction to. He first administered steroids
and started me on a small dose and titrated it up as I was able to handle it. Now I have some days where I have pretty good control — I can print a little but can't write well and other days where I can't print, write, or feed myself.
I have performed many functions. I have been an analyst, a programmer, a data base designer, and a college professor at three different colleges. I've done extensive work in process automation and have even automated the management functions
for a data base system that was used to schedule every aspect of all the aircraft, ranges, and weapons development processes on Eglin AFB. I also wrote major pieces of the code used by the system and trouble shot and corrected functions written by other
programmers. The system supported over 300 users a day on two bases. Unfortunately it was developed in Fortran on a VAX and with VB6 and MS Access using VBA, Queries, Tables and Forms on networked PCs.
I plan to do a lot of reading. I'll also be looking at the Microsoft sites for a sample DB and lessons to go with it. I am a little frustrated with how information is organized on the web. The other night I needed to find some information
about something from Microsoft. It took me almost two hours to ask my question in such a way that MS was able to provide what I wanted. I kept asking essentially the same thing, but I had to use the exact phrase MS used on the page. I know
MS is big and they support multiple generations of each product. They have an almost impossible task. I just have to find the various product entry pages.
Thanks for offering your help. -
Exchange Server 2013 install problem
I am currently trying to install our first Exchange 2013 mailbox in a child domain. This will coexist with Exchange 2010. I have run the prepare schema/AD and /preparealldomains in the root domain. I have checked the various ADSI attributes to check that
the updates have completed and I can see no replication issues.
All of the existing Exchange 2010 servers have SP3 and update roll up 5 installed apart from 1 mailbox server that is just SP3.
I am trying to install Exchange 2013 on Server 2012 r2 with all available updates.
The problem i am having is every time i run the Exchange 2013 setup choosing the mailbox role to install the prerequisite analysis fails stating "Local domain needs to be prepared" and points to an article on how to run the setup /preparedomain
that i have already done.
Can anyone offer any insight in to what setup is checking for, what might be causing this and how to get past it?
ThanksHi all, I had already tried to force replication and not seen any problems, The accounts I am using have the correct permissions, as Bruce says you can't /prepareschema on a child domain this has to be done in the domain where the Schema Master is.
I have also already run the /preparedomain in the child Domain and it has made no difference.
I have checked and confirmed the ADSI attributes in this Technet article
https://technet.microsoft.com/en-us/library/bb125224%28v=exchg.150%29.aspx
The exchange setup logs are not really giving me anything to work with. Each time i run the setup i see an error on in the event viewer of the server i run in on as follows :
View Entire Forest: 'True', Configuration Domain Controller: 'Domain Controller', Preferred Global Catalog: 'Domain Controller', Preferred Domain Controllers: '{ Domain Controller }'
Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'Server' couldn't be found on 'Domain Controller'
Not sure if this is points to anything? I can obviously find the server object in the referenced Domain Controller.
I am also seeing this in the application log each time i run the setup.
ExSetupUI.exe
2892
Get Servers for ROOT DOMAIN
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0157024. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890 -
Photoshop download install problems
Hello all,
I bought photoshop off of amazon.com (the download-able version) and when trying to install it I get this message:
"Error 1335. The cabinet file 'Data1.cab' required for this application is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package."
Any suggestions?
-Cheers-photoshopnotinstalling
It is not clear what product that you have. Photoshop or Photoshop Elements. All you say is that you are having difficulties installing Photoshop from a download from Amazon. Since this is the Premiere Elements Forum, the question should be placed in
Adobe Photoshop Forum
http://forums.adobe.com/community/photoshop
or
Adobe Photoshop Elements Forum
http://forums.adobe.com/community/photoshop_elements
I did find one Adobe document on the Error 1335
http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html
but it seems aimed at installation by disc. Are you doing the installation with the antivirus and firewalls off?
We will be watching for your progress depending on how the moderator directs your thread.
By the way, did you get a purchased serial number from Amazon yet?
ATR -
Windows 7 Home premium 64 bit SP1 download/install problems
Hi all,
Bought a brand new laptop from an electronics store in Nov. 2010 with Windows 7 Home Premium 64 bit pre-installed.
All is well with being notified of all avail. MS updates and I am fully patched with all of them....except SP1. I have never been notified that sp1 was available to download and install.
I have tried everything.
Checked "winver" and no sp1 is not installed
Downloaded SP1 from MS website which requires validation (passed validation of course) and tried running sp1 from desktop and get error "Directory name is invalid"
Turned off A/V and Firewall ran again and same result. Burned and .iso of sp1 ran it, same result.
Ran in safe mode..same thing
Ran MS troubleshooter and updates are fine
I have KB976902 installed
Windows Update KB2454826 is installed
Reset windows updates
All drivers are current
ran sfc/SCANNOW no errors found.
Only language pack installed is English
Pls help2011-03-22 09:25:48, Error CSI 00000018 (F) c0000103 [Error,Facility=(system),Code=259 (0x0103)] #11503521# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags
= (AllowFileNotFound|AllowSharingViolation), handle = {provider=NULL, handle=0}, da = (SYNCHRONIZE|FILE_READ_ATTRIBUTES), oa = @0x24edbd0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[27]"\??\C:\Windows\System32\Wat"; a:(OBJ_CASE_INSENSITIVE)},
iosb = @0x24edc80, as = (null), fa = 0, sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
[gle=0xd0000103]
// MessageId: STATUS_NOT_A_DIRECTORY
// MessageText:
// A requested opened file is not a directory.
#define STATUS_NOT_A_DIRECTORY ((NTSTATUS)0xC0000103L)
[HRESULT = 0x8007010b - ERROR_DIRECTORY]
1cb694ed6dca5fe: 74c, c0000043, e7, 0, MoveFile ;\SystemRoot\WinSxS\Temp\PendingRenames\77efad174e69cb01cc010000bc103413.WatAdminSvc.exe, \??\C:\Windows\System32\Wat\WatAdminSvc.exe
You have an issue with the Windows Activation technology update KB<cite>971033</cite>
Also the this iNI is damaged.
2011-03-22 09:25:50, Info CSI 00000022 Hashes for file member \??\C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Games\Desktop.ini
do not match actual file [l:22{11}]"Desktop.ini" :
So run chkdsk C: /r /f first to make sure your HDD is fine, next run sfc /scannow to check if the damaged files can be restored.
André
"A programmer is just a tool which converts caffeine into code"
Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221
Maybe you are looking for
-
SCIM no longer works after last package update
I just did the usual sudo pacman -Syu and now SCIM Pinyin chinese input no longer works: When I press the hot key to enable chinese input, it only shows "English/European" in the notification bar that pops up, and I cannot enter chinese characters. A
-
Need Help/Advice with Photo Web Gallery coming from SQL Database
This is my first attempt at a database driven website. I assume what I am trying to accomplish should be fairly easy for more experienced but I am stuck at this point. First, let me explain what I am trying to accomplish. I want to create a thumbnail
-
Re: Unable to Cancel Premium Subscription (Group v...
I can't either cancel my Skype Premium account! There is no way to cancel it or to find any answer. Please help me with a link that really works. Thanks.
-
Hi Experts, We have a few user's who are on Higher Duty and for these persons in table HRP1001 in SRM shows all the entries but when we try to view it in the Org plan it doesn't appear anywhere. I know we can pfal the person, but i would like to know
-
Netgear genie won't open on Mac mini.
I can no longer get netgear genie to open on my Mac mini. It'll install and say it installed correctly but when opening it it'll say it can't open on this type of Mac. A gives? It used to work. And talking to their support is pointless. I made my poi