HTTP Server process dies

Hi
We have got Oracle9ias release 9.0.3 with Webcache running on a 4 processor 4GigRam server.
JDK is 1.3.1_02.
The HTPP server process dies after a while. The entry in the imp.log
reveals this:
03/11/10 20:20:34 ipm_hc_get_headers: failed to get reply back from send
03/11/10 20:20:34 ohs ping: Failed to get a numeric http status from OHS
03/11/10 20:20:56 ipm_hc_get_headers: failed to get reply back from send
03/11/10 20:20:56 ohs ping: Failed to get a numeric http status from OHS
03/11/10 20:21:18 ipm_hc_get_headers: failed to get reply back from send
03/11/10 20:21:18 ohs ping: Failed to get a numeric http status from OHS
Using IHAT it shows that the HTTP serve had 3107 errors so far. What is amzing is that the process started itself after apporx 2 hours while we were looking at the log files. This is now the 3rd time that this process has died on us.
Any know patches to load or bugs that we should be aware of?
Tks
Andre

k
why doesnt that stupid installer tell that [http] and [https] just dont work and u have to use [socket] as connection mode to make it work :(((

Similar Messages

Application Engine Server process dies on Windows

Hi experts,
We developed an AE in which employee data will be calculated and inserted to HR core table via CI. We started multiple instance of the AE by people code, most of them will success but others run into error and reported "Process XXX is marked 'Initiated' or 'Processing' but no longer running.". On further research we found the windows process (PSAESRV) died and a folder named PSAESRV.PID was generated in process scheduler log directory. The following can be found in "process_state.txt" in the directory:
Exception: (0xC0000005) EXCEPTION_ACCESS_VIOLATION - Memory access violation
(The memory at 0x00133000 could not be read)
Exception location:
Fault address=0x2500b836 0001:0000a836 C:\PT850\BIN\SERVER\WINX86\pscmnutils.dll
Other information:
Tools: 8.50
Server:Windows XP SP3.
Database:Oracle 10.2.0.1.0.
Could any one figure out what's the problem?
Edited by: user9546195 on 2010-12-7 下午10:32

Yes it's running on Windows XP professional. We run the test both in Linux Server and Windows XP. So far no error has been found in Linux Server. We began performance test and found the error on Windows XP on April,2010. Then we refine the code and test again these days, and the error happens again with the same error message.
*Not sure whether the Peopletools is up-to-date or not, the version of modules can be found in the "process_state.txt" file of the dead process. Attached below is the file.
Thanks!
Crash report file opened as 'C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\PSAESRV.6604\process_state.txt'
==================================================================================
Process state report - Start
Local Time: Wed Dec 08 13:40:55 2010
UTC Time: Wed Dec 08 05:40:55 2010
Timezone: China Standard Time
==================================================================================
==================================================================================
Process information
Process ID: 6604
==================================================================================
System information:
Architecture: x86
OS Name: Windows
OS Version: XP Professional (Kernel 5.1, Build 2600, Service Pack 3)
OS Parameters: %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
Physical memory: 3327MB total, 243MB available
Paging space: 6319MB total, 868MB available
==================================================================================
Process diagnostics - Start
==================================================================================
Stack Trace
Stack trace for process ID: 6604
Thread 3400 (Exception thread):
Address Frame Function Arguments Module!Symbol Name
0x2500b836 0x0012f8b4 0x16219ada 0x03c24ca8 0x01940e58 0x2500d746 EXP pscmnutils!CWriteFrame::Copy+0xf6
0x2500cab7 0x0012f8fc 0x197eeda0 0x0572d250 0x0572d250 0x0012f94c EXP pscmnutils!CWriteFrame::FlushSecondaryAttachList+0x87
0x28102666 0x0012f91c 0x0012f970 0000000000 0x0012f958 0x2810d7ce EXP psnetapi!CNetSendMsg::~CNetSendMsg+0x76
0x28102723 0x0012f92c 0x00000001 0x197eede4 0x01940e58 0000000000 EXP psnetapi!CNetSendMsg::~CNetSendMsg+0x133
0x2810d7ce 0x0012f958 0x273a8f13 0x01940e58 0x01970a70 0x01214448 EXP psnetapi!CNetReqRepSvc::~CNetReqRepSvc+0xfe
0x004014a5 0x0012fb7c 0x01940e58 0x273a8fdf 0x0193f8a8 0x0121b250 *** PSAESRV!<symbol>
0x00401c38 0x0012fbb0 0x01940e58 0x01214448 0x0193d750 0x0121b250 *** PSAESRV!<symbol>
0x6046776e 0x0012fc58 0x0121b250 0x0012fcd8 0x03452198 0x00000001 EXP LIBTUX!tmsvcdsp+0xc4e
0x604847fb 0x0012fca8 0x0121b250 0x0012fcd8 0000000000 0x0121db68 EXP LIBTUX!tmrcvrq+0x73b
0x6048a1a9 0x0012fcfc 0000000000 0x7c93003d 0000000000 0x0012fd20 EXP LIBTUX!tmrunserver+0xe19
0x7c930021 0x0012fd04 0000000000 0x0012fd20 0000000000 0x0012fd28 EXP ntdll!RtlFreeHeap+0x114
<Invalid stack frame detected: Frame address 0000000000 should be higher than 0x0012fd04>
0x7c93003d 0000000000 0000000000 0000000000 0000000000 0000000000 EXP ntdll!RtlFreeHeap+0x130
Thread 17664:
Address Frame Function Arguments Module!Symbol Name
0x7c92e4f4 0x01ccff44 0x00000002 0x01ccff6c 0000000000 0x000493e0 EXP ntdll!KiFastSystemCallRet+0x0
0x77dc8601 0x01ccffb4 0000000000 0x7c93428f 0000000000 0000000000 EXP ADVAPI32!WmiFreeBuffer+0x24e
0x7c80b713 0x01ccffec 0x77dc845a 0000000000 0000000000 0x00000032 EXP kernel32!GetModuleFileNameA+0x1b4
Thread 31556:
Address Frame Function Arguments Module!Symbol Name
0x7c92e4f4 0x03c23ac4 0xffffffff 0000000000 0x03c23ae8 0x29712bab EXP ntdll!KiFastSystemCallRet+0x0
0x7c802455 0x03c23ad4 0xffffffff 0x4cff1a68 0x0121cab0 0x03c24204 EXP kernel32!Sleep+0xf
0x29712bab 0x03c23ae8 0xffffffff 0000000000 0x18b31bb3 0x00000057 EXP pspal!PSPAL_GetThread+0x11b
0x297011cc 0x03c24204 0x2971a970 0x2971a5a8 0x00000241 0x2971a9ac EXP pspal!<symbol>
0x29705515 0x03c24240 0x03c24844 0000000000 0x781778f1 0x00000057 EXP pspal!PSPAL_GetExceptionHandler+0xc25
0x29705c32 0x03c24258 0x03c24844 0x18b31c1b 0000000000 0x7c885780 EXP pspal!PSPAL_GetExceptionHandler+0x1342
0x29706502 0x03c245ac 0x03c24844 0000000000 0000000000 0000000000 EXP pspal!PSPAL_GetExceptionHandler+0x1c12
0x7c864031 0x03c2481c 0x03c24844 0x7c839b21 0x03c2484c 0000000000 EXP kernel32!UnhandledExceptionFilter+0x1c7
0x7c83ab38 0x03c2ffec 0x7813286e 0x0341cba0 0000000000 0x00000008 EXP kernel32!ValidateLocale+0x1328
==================================================================================
Loaded Modules
Base Version Name
0x00400000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSAESRV.exe
0x7C920000 5.01.2600.5512 C:\WINDOWS\system32\ntdll.dll
0x7C800000 5.01.2600.5512 C:\WINDOWS\system32\kernel32.dll
0x60420000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBTUX.dll
0x78130000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll
0x77BE0000 7.00.8638.5512 C:\WINDOWS\system32\msvcrt.dll
0x60D90000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBENGINE.dll
0x71A40000 5.01.2600.5512 C:\WINDOWS\system32\WSOCK32.dll
0x71A20000 5.01.2600.5512 C:\WINDOWS\system32\WS2_32.dll
0x77DA0000 5.01.2600.5512 C:\WINDOWS\system32\ADVAPI32.dll
0x77E50000 5.01.2600.6015 C:\WINDOWS\system32\RPCRT4.dll
0x77FC0000 5.01.2600.5834 C:\WINDOWS\system32\Secur32.dll
0x71A10000 5.01.2600.5512 C:\WINDOWS\system32\WS2HELP.dll
0x77D10000 5.01.2600.5512 C:\WINDOWS\system32\USER32.dll
0x77EF0000 5.01.2600.5512 C:\WINDOWS\system32\GDI32.dll
0x60D30000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBFML.dll
0x60D10000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBFML32.dll
0x60C90000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBGICONV.dll
0x60EE0000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBBUFT.dll
0x10000000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBUTRACE.dll
0x76990000 5.01.2600.5512 C:\WINDOWS\system32\ole32.dll
0x29700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspal.dll
0x29600000 1.10.0000.0000 C:\PT850\BIN\SERVER\WINX86\TRIO.dll
0x7D590000 6.00.2900.6018 C:\WINDOWS\system32\SHELL32.dll
0x77F40000 6.00.2900.5912 C:\WINDOWS\system32\SHLWAPI.dll
0x76BC0000 5.01.2600.5512 C:\WINDOWS\system32\PSAPI.DLL
0x03000000 6.09.0003.0113 C:\PT850\BIN\SERVER\WINX86\dbghelp.dll
0x77BD0000 5.01.2600.5512 C:\WINDOWS\system32\VERSION.dll
0x7C420000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCP80.dll
0x00430000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psaesrvutils.dll
0x25000000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pscmnutils.dll
0x76B10000 5.01.2600.5512 C:\WINDOWS\system32\WINMM.dll
0x30E00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspetssl.dll
0x00470000 C:\PT850\BIN\SERVER\WINX86\PSLIBEAY32.dll
0x00550000 1.02.0002.0000 C:\PT850\BIN\SERVER\WINX86\zlib1.dll
0x28100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psnetapi.dll
0x29800000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSJNI.dll
0x27E00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmt.dll
0x25200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pscompat.dll
0x24A00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbtunicode.dll
0x24F00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pscmn.dll
0x005E0000 7.18.0001.0000 C:\PT850\BIN\SERVER\WINX86\libpscurl.dll
0x00630000 C:\PT850\BIN\SERVER\WINX86\PSSSLEAY32.dll
0x12000000 C:\PT850\BIN\SERVER\WINX86\xerces-depdom_2_6.dll
0x00680000 2.05.0000.0000 C:\PT850\BIN\SERVER\WINX86\xerces-c_2_6.dll
0x2B700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psperfagent.dll
0x692E0000 5.00.2195.4952 C:\PT850\BIN\SERVER\WINX86\pdh.dll
0x76320000 6.00.2900.5512 C:\WINDOWS\system32\comdlg32.dll
0x5D170000 5.82.2900.5512 C:\WINDOWS\system32\COMCTL32.dll
0x770F0000 5.01.2600.5512 C:\WINDOWS\system32\OLEAUT32.dll
0x60530000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBTMIB.dll
0x606C0000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBQM.dll
0x606B0000 C:\FUSION\TUXEDO10GR3_VS2005\BIN\LIBQS.dll
0x24600000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psappeng.dll
0x24D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbufapi.dll
0x2DC00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pssys.dll
0x27700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmath.dll
0x27A00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmgr.dll
0x2CD00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pssam.dll
0x27D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psmsf.dll
0x2AF00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspceval.dll
0x00940000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psdbgutils.dll
0x2B000000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspcm.dll
0x25C00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psfinmth.dll
0x2C500000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspubsub.dll
0x27200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pskeystore.dll
0x30600000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psxmldoc.dll
0x009C0000 1.09.0000.0000 C:\PT850\BIN\SERVER\WINX86\Xalan-C_1_9.dll
0x00C20000 C:\PT850\BIN\SERVER\WINX86\XalanMessages_1_9.dll
0x26800000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psintbrkr.dll
0x26C00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psiobase.dll
0x26D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psiocls.dll
0x3E410000 7.00.6000.17080 C:\WINDOWS\system32\WININET.dll
0x00C70000 6.00.5441.0000 C:\WINDOWS\system32\Normaliz.dll
0x3EAB0000 7.00.6000.17080 C:\WINDOWS\system32\iertutil.dll
0x00C80000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSAPIAdapter.DLL
0x25E00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psflr.dll
0x29100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psoptshared.dll
0x2D200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psqastransfer.dll
0x27500000 C:\PT850\BIN\SERVER\WINX86\psls.dll
0x2C300000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspsm.dll
0x2CC00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psrenutil.dll
0x2A900000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspageutil.dll
0x29F00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psstflsrvutils.dll
0x29D00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbamparser.dll
0x30F00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pswrkrt.dll
0x782E0000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_b77cec8e\MFC80U.DLL
0x24500000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psapmsg.dll
0x29B00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psstatecore.dll
0x2A100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psbamutil.dll
0x29900000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psstateutil.dll
0x29200000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psoptutil.dll
0x2AA00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pspams.dll
0x00DD0000 11.00.0001.0000 C:\PT850\BIN\SERVER\WINX86\cplex110.dll
0x2D100000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psqasutil.dll
0x2D400000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psserver.dll
0x011B0000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pstcagent.dll
0x2EA00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pstcproxy.dll
0x76300000 5.01.2600.5512 C:\WINDOWS\system32\IMM32.DLL
0x62C20000 5.01.2600.5512 C:\WINDOWS\system32\LPK.DLL
0x73FA0000 1.420.2600.5969 C:\WINDOWS\system32\USP10.dll
0x77180000 6.00.2900.6028 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll
0x5DBA0000 5.01.2600.5512 C:\WINDOWS\system32\rdpsnd.dll
0x762D0000 5.01.2600.5512 C:\WINDOWS\system32\WINSTA.dll
0x5FDD0000 5.01.2600.5694 C:\WINDOWS\system32\NETAPI32.dll
0x2D300000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\pssecurity.dll
0x5D360000 8.00.50727.4053 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.MFCLOC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_0ccc058c\MFC80CHS.DLL
0x60130000 10.03.0000.0000 C:\fusion\tuxedo10gR3_VS2005\bin\registry.dll
0x25700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\PSORA.dll
0x01FF0000 10.02.0000.0000 D:\ORACLE\BIN\OCI.dll
0x7C340000 7.10.3052.0004 C:\WINDOWS\system32\MSVCR71.dll
0x61C20000 10.02.0000.0000 D:\oracle\bin\OraClient10.Dll
0x60870000 10.02.0000.0000 D:\oracle\bin\oracore10.dll
0x60A80000 10.02.0000.0000 D:\oracle\bin\oranls10.dll
0x63690000 10.02.0000.0000 D:\oracle\bin\oraunls10.dll
0x01F30000 10.02.0000.0000 D:\oracle\bin\orauts.dll
0x636B0000 10.02.0000.0000 D:\oracle\bin\oravsn10.dll
0x60FA0000 10.02.0000.0000 D:\oracle\bin\oracommon10.dll
0x02050000 10.02.0000.0000 D:\oracle\bin\orageneric10.dll
0x63430000 10.02.0000.0000 D:\oracle\bin\orasnls10.dll
0x025B0000 10.02.0000.0000 D:\oracle\bin\oraxml10.dll
0x01F40000 7.00.2600.5512 C:\WINDOWS\system32\MSVCIRT.dll
0x60960000 10.02.0000.0000 D:\oracle\bin\oran10.dll
0x62740000 10.02.0000.0000 D:\oracle\bin\oranl10.dll
0x62790000 10.02.0000.0000 D:\oracle\bin\oranldap10.dll
0x627F0000 10.02.0000.0000 D:\oracle\bin\orannzsbb10.dll
0x62530000 10.02.0000.0000 D:\oracle\bin\oraldapclnt10.dll
0x62670000 10.02.0000.0000 D:\oracle\bin\orancrypt10.dll
0x62920000 10.02.0000.0000 D:\oracle\bin\oranro10.dll
0x626B0000 10.02.0000.0000 D:\oracle\bin\oranhost10.dll
0x62660000 10.02.0000.0000 D:\oracle\bin\orancds10.dll
0x629C0000 10.02.0000.0000 D:\oracle\bin\orantns10.dll
0x02710000 10.02.0000.0000 D:\oracle\bin\orapls10.dll
0x02A70000 10.02.0000.0000 D:\oracle\bin\oraslax10.dll
0x63080000 10.02.0000.0000 D:\oracle\bin\oraplp10.dll
0x61ED0000 10.02.0000.0000 D:\oracle\bin\orahasgen10.dll
0x62AB0000 10.02.0000.0000 D:\oracle\bin\oraocr10.dll
0x62B20000 10.02.0000.0000 D:\oracle\bin\oraocrb10.dll
0x62980000 10.02.0000.0000 D:\oracle\bin\orantcp10.dll
0x02A80000 10.02.0000.0000 D:\oracle\bin\orasql10.dll
0x719C0000 5.01.2600.5512 C:\WINDOWS\system32\mswsock.dll
0x02DD0000 5.01.2600.5512 C:\WINDOWS\system32\hnetcfg.dll
0x71A00000 5.01.2600.5512 C:\WINDOWS\System32\wshtcpip.dll
0x71F00000 5.01.2600.5512 C:\WINDOWS\system32\security.dll
0x77C40000 5.01.2600.5876 C:\WINDOWS\system32\msv1_0.dll
0x76760000 5.01.2600.5512 C:\WINDOWS\system32\cryptdll.dll
0x76D30000 5.01.2600.5512 C:\WINDOWS\system32\iphlpapi.dll
0x2BE00000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psppr.dll
0x02F80000 C:\PT850\BIN\SERVER\WINX86\PSUSER.DLL
0x76FA0000 2001.12.0000.4414 C:\WINDOWS\system32\CLBCATQ.DLL
0x77020000 2001.12.0000.4414 C:\WINDOWS\system32\COMRes.dll
0x28700000 8.50.0000.0000 C:\PT850\BIN\SERVER\WINX86\psoftapi.dll
0x55300000 4.00.0001.0002 C:\PT850\BIN\SERVER\WINX86\pdflib.dll
Process diagnostics - End
==================================================================================
==================================================================================
Internal process state - Start
==================================================================================
Abort message:
Unrecoverable exception received
==================================================================================
Exception context:
Exception record:
Exception: (0xC0000005) EXCEPTION_ACCESS_VIOLATION - Memory access violation
(The memory at 0x00133000 could not be read)
Exception is continuable
Machine context:
eip:2500b836
eflags:00210283
system: [ ID:1 VIP:0 VIF:0 AC:0 VM:0 RF:1 NT:0 IOPL:0 IF:1 TF:0 ]
status: [ OF:0 SF:1 ZF:0 AF:0 PF:0 CF:1 ]
control: [ DF:0 ]
cs:001b ds:0023 es:0023 fs:003b gs:0000 ss:0023
eax:00002386 ebx:16219a00 ecx:00133000 edx:3eb0003a
esi:0572d250 edi:0012e8e4 ebp:0012f8b4 esp:0012f8a8
fpcw:027f [ X:0 RC:0(nearest) PC:2(double) PM:1 UM:1 OM:1 ZM:1 DM:1 IM:1 ]
fpsw:0120 [ B:0 C3:0 TOP:0 C2:0 C1:0 C0:1 ES:0 SF:0 PE:1 UE:0 OE:0 ZE:0 DE:0 IE:0 ]
fptw:ffff
fip:001b:2b70cc0d
fdp:0023:0012e9f0
st0:000078141fe4fffffffc (empty) 0
st1:0000781420637c8097d0 (empty) 0
st2:00270000000700000000 (empty) nan
st3:2e58781c19f800000000 (empty) nan
st4:00000000000000d7fa01 (empty) 0
st5:000000d7f90460e65d5b (empty) 0
st6:400ec547000000000000 (empty) 50503
st7:00000000000000000000 (empty) 0
mm0:78141fe4fffffffc
:fffffffc 78141fe4
:fffc ffff 1fe4 7814
:fc ff ff ff e4 1f 14 78
mm1:781420637c8097d0
:7c8097d0 78142063
:97d0 7c80 2063 7814
:d0 97 80 7c 63 20 14 78
mm2:0000000700000000
:00000000 00000007
:0000 0000 0007 0000
:00 00 00 00 07 00 00 00
mm3:781c19f800000000
:00000000 781c19f8
:0000 0000 19f8 781c
:00 00 00 00 f8 19 1c 78
mm4:0000000000d7fa01
:00d7fa01 00000000
:fa01 00d7 0000 0000
:01 fa d7 00 00 00 00 00
mm5:00d7f90460e65d5b
:60e65d5b 00d7f904
:5d5b 60e6 f904 00d7
:5b 5d e6 60 04 f9 d7 00
mm6:c547000000000000
:00000000 c5470000
:0000 0000 0000 c547
:00 00 00 00 00 00 47 c5
mm7:0000000000000000
:00000000 00000000
:0000 0000 0000 0000
:00 00 00 00 00 00 00 00
mxcsr:00001f80 [ FZ:0 RC:0 PM:1 UM:1 OM:1 ZM:1 DM:1 IM:1 DAZ:0 PE:0 UE:0 OE:0 ZE:0 DE:0 IE:0 ]
xmm0:00000000000000000000000000000000
:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
:0000 0000 0000 0000 0000 0000 0000 0000
:00000000 00000000 00000000 00000000
:0000000000000000 0000000000000000
: 0.000000e+00 0.000000e+00 0.000000e+00 0.000000e+00
: 0.000000000000000e+00 0.000000000000000e+00
xmm1:00660020007300730065006300630061
:61 00 63 00 63 00 65 00 73 00 73 00 20 00 66 00
:0061 0063 0063 0065 0073 0073 0020 0066
:00630061 00650063 00730073 00660020
:0065006300630061 0066002000730073
: 9.091850e-39 9.275524e-39 1.056124e-38 9.367265e-39
: 9.345982464254671e-307 9.790542281716366e-307
xmm2:0020007200650073007500200072006f
:6f 00 72 00 20 00 75 00 73 00 65 00 72 00 20 00
:006f 0072 0020 0075 0073 0065 0072 0020
:0072006f 00750020 00650073 00200072
:007500200072006f 0020007200650073
: 1.046940e-38 1.074480e-38 9.275546e-39 2.938896e-39
: 1.869105501982261e-306 4.450631538595433e-308
xmm3:0067006e0061006800630020006f0074
:74 00 6f 00 20 00 63 00 68 00 61 00 6e 00 67 00
:0074 006f 0020 0063 0068 0061 006e 0067
:006f0074 00630020 00610068 0067006e
:00630020006f0074 0067006e00610068
: 1.019390e-38 9.091759e-39 8.908189e-39 9.459210e-39
: 8.455497966197594e-307 1.023608670170218e-306
xmm4:00610070002000650068007400200065
:65 00 20 00 74 00 68 00 65 00 20 00 70 00 61 00
:0065 0020 0074 0068 0065 0020 0070 0061
:00200065 00680074 00200065 00610070
:0068007400200065 0061007000200065
: 2.938877e-39 9.551054e-39 2.938877e-39 8.908200e-39
: 1.068114220898795e-306 7.566011645531745e-307
xmm5:0020002e00640072006f007700730073
:73 00 73 00 77 00 6f 00 72 00 64 00 2e 00 20 00
:0073 0073 0077 006f 0072 0064 002e 0020
:00730073 006f0077 00640072 0020002e
:006f007700730073 0020002e00640072
: 1.056124e-38 1.019391e-38 9.183709e-39 2.938800e-39
: 1.379626599065753e-306 4.450342947103102e-308
xmm6:00610063002000720065007300550020
:20 00 55 00 73 00 65 00 72 00 20 00 63 00 61 00
:0020 0055 0073 0065 0072 0020 0063 0061
:00550020 00650073 00200072 00610063
:0065007300550020 0061006300200072
: 7.806062e-39 9.275546e-39 2.938896e-39 8.908182e-39
: 9.346091108988483e-307 7.565923370506860e-307
xmm7:006100200079006c006e006f0020006e
:6e 00 20 00 6f 00 6e 00 6c 00 79 00 20 00 61 00
:006e 0020 006f 006e 006c 0079 0020 0061
:0020006e 006e006f 0079006c 00610020
:006e006f0020006e 006100200079006c
: 2.938890e-39 1.010206e-38 1.111225e-38 8.908088e-39
: 1.335119688726395e-306 7.565468423830832e-307
==================================================================================
Exception location:
Fault address=0x2500b836 0001:0000a836 C:\PT850\BIN\SERVER\WINX86\pscmnutils.dll
==================================================================================
Process information
Process name: PSAESRV
Command line: PSAESRV -C dom=PSNT_58039 -g 101 -i 3 -u XIAOWEI2-CN -U "C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\TUXLOG" -m 0 -R 15612 -o .\LOGS\stdout -e .\LOGS\stderr -- -CD HC91PT -S PSAESRV
Process ID: 6604
Parent process ID: 2680
Process owner: NT AUTHORITY\SYSTEM
Desktop: \Sessions\0\Windows\WindowStations\WinSta0\Desktops\Default
==================================================================================
Thread information
Current thread ID: 3400
==================================================================================
Virtual Memory
Virtual memory: 2047MB total, 1508MB available
==================================================================================
Environment Variables
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Administrator\Application Data
APPDIR=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT
APP_PW=PS
BDMCONFIG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\HC91PT\PSBDMCFG
CLIENTNAME=Console
COMMONPROGRAMFILES=C:\Program Files\Common Files
COMPUTERNAME=XIAOWEI2-CN
COMSPEC=C:\WINDOWS\system32\cmd.exe
DEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
FIELDTBLS=tpadm
FLDTBLDIR=C:\fusion\tuxedo10gR3_VS2005\udataobj
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Administrator
JAVA_OPTS="-Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Xms32m -Xmx64m"
JAVA_PLUGIN_WEBCONTROL_ENABLE=1
LD_LIBRARY_PATH=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT;C:\fusion\tuxedo10gR3_VS2005\lib;\lib;\user\lib;
LOGONSERVER=\\XIAOWEI2-CN
NLSPATH=C:\fusion\tuxedo10gR3_VS2005\locale\C
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=D:\oracle
ORACLE_SID=HC91PT
OS=Windows_NT
PATH=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT;C:\fusion\tuxedo10gR3_VS2005\bin;\bin;C:\PT850\bin\server\winx86;C:\PT850\jre\bin\client;D:\ORACLE\BIN;C:\WINDOWS;C:\WINDOWS\SYSTEM32;C:\PT850\verity\winx86\_nti40\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB=D:\oracle\perl\5.8.3\lib\MSWin32-x86;D:\oracle\perl\5.8.3\lib;D:\oracle\perl\5.8.3\lib\MSWin32-x86;D:\oracle\perl\site\5.8.3;D:\oracle\perl\site\5.8.3\lib;D:\oracle\sysman\admin\scripts;
PMID=XIAOWEI2-CN
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
PROGRAMFILES=C:\Program Files
PROMPT=$P$G
PSAPPSERVSTARTUP=N
PS_CFG_HOME=C:\Documents and Settings\Administrator\psft\pt\8.50
PS_HOME=C:\PT850
PS_MACH=XIAOWEI2-CN
PS_SERVDIR=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT
PS_SERVER_CFG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\psprcs.cfg
SESSIONNAME=Console
SYSTEMDRIVE=C:
SYSTEMROOT=C:\WINDOWS
TEMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TUXCONFIG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\PSTUXCFG
TUXDIR=C:\fusion\tuxedo10gR3_VS2005
UBBCONFIG=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\psprcsrv.ubb
USERDOMAIN=XIAOWEI2-CN
USERNAME=Admin
USERPROFILE=C:\Documents and Settings\Administrator
VIEWDIR=C:\fusion\tuxedo10gR3_VS2005\udataobj
VIEWFILES=mib_views.VV,tmib_views.VV
VSEDEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
WINDIR=C:\WINDOWS
NTSYMBOL_PATH=C:\PT850\bin\server\winx86
TUXOFFSET=0
ULOGPFX=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\TUXLOG
PS_NLS_LANG=SIMPLIFIED CHINESE_CHINA.ZHS16GBK
NLS_LANG=SIMPLIFIED CHINESE_CHINA.UTF8
PS_COBOLTYPE=U
PSPRCSLOGDIR=C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\log_output\AE_HR_CPI_POST_1820
==================================================================================
Execution Options
Global flags: 0x00000000
==================================================================================
Application state
PeopleTools process state
Writing PeopleTools state to C:\Documents and Settings\Administrator\psft\pt\8.50\appserv\prcs\HC91PT\LOGS\PSAESRV.6604\peopletools_state.txt
ERROR: Timed out waiting for internal process state
Internal process state - End
==================================================================================
Process state report - End
==================================================================================

HTTP Server not starting in SOA Suite for linux

Hi all,
Installation and configuration of the new SOA Suite on SUSE 9 is not without faults. During the configuration the HTTP Server process is not starting. According the log file (opmn/logs/HTTP_Server~1.log) the HTTP Server is trying to start in SSL-mode, but I guess the SSL was not properly configured during the installation by the installer. I am not able to configure SSL myself, so my workaround was to disable SSL in the opmn.xml configuration file.
Is anyone experiencing these problems? How can I configure SSL? Is SSL supposed to be enabled on the soa-server?
Thanks in advance,
Harm
PS. The type of installation = advanced install, full
Message was edited by: Harm

Hi,
First shutdown iAS, then edit the opmn.xml and restart.
Original opmn.xml fragment:
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
Edited opmn.xml fragment:
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-disabled"/>
Kind regards,
H

F60srvm process dies under Solaris

We are running OAS 4.0.7 under Solaris 2.6 with Oracle 8.0.5.
Our version of Developer 6 is 6.0.5.0.3.
We get a process started with "f60ctl start"
The server process dies when we invoke the form in a browser.
Anybody have any suggestions?

If you start a background process, the shell remembers its pid in $!.
That can be used to store the pid in a pid-file, which may be useful when stopping the thing or preventing multiple starts.
Or you can also use a wrapper script around the java program which remembers the java process's PID and traps the exit and sigstop signals, and in the trap stops the java process. Thus you have to find your own script process, not the java process
BTW: is there any special way to stop your java process or you want just to send it a SIGTERM signal?

SRT: Unexpected failure in SOAP processing occurred - HTTP server instance

I am trying to invoke an ABAP server proxy. I can see the call route through XI. But then when it tries to invoke the ABAP server proxy, i get the following error - SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance"). It looks like this might be a configuration issue on the SAP ECC side but I am not sure what needs to be corrected. Here is the error is XI.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance") Error when sending by HTTP (error code: 500, error text: SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance"))</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Your help is appreciated. I saw another posting about the same error but it was not answered:
Re: SOAP:1.026 SRT: "no configuration for this HTTP server instance"
Thanks,
Jay

hi Jay,
i face the same problem for the web service and after reading your thread i've check that the ECC XI web service is already active in SICF
is it possible the user id used for testing dont have authorization for testing or accessing the web service ?
if it is possible, do you know what kind authorization that i need to add to the user id ?
please advice and many thanks in advance

Http server start/stop process

Hi
I always see below start/stop messages in the D:\app\Oracle\opmn\logs\HTTP_Server~1
We are not stopping/starting anything. Does it mean that the http server stop/start itself ? Will this affect users ?
12/06/07 23:18:12 Start process
12/06/26 10:03:03 Stop process
12/06/26 10:04:05 Start process
[Tue Jun 26 10:04:05 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/06/29 11:52:06 Stop process
12/06/29 11:53:08 Start process
[Fri Jun 29 11:53:09 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/03 08:54:18 Stop process
12/07/03 08:55:20 Start process
[Tue Jul 03 08:55:21 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server running...
12/07/11 23:25:45 Start process
12/07/14 12:38:15 Stop process
12/07/14 12:39:17 Start process
[Sat Jul 14 12:39:17 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/18 18:06:11 Stop process
12/07/18 18:07:13 Start process
[Wed Jul 18 18:07:13 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/25 10:58:29 Stop process
12/07/25 10:59:31 Start process
[Wed Jul 25 10:59:32 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/25 11:03:02 Stop process
12/07/25 11:04:04 Start process
[Wed Jul 25 11:04:05 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
12/07/25 11:06:55 Stop process
12/07/25 11:07:57 Start process
[Wed Jul 25 11:07:57 2012] [warn] pid file d:/app/oracle/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
Similar stop/start messages in D:\app\Oracle\opmn\logs\ipm.log
12/07/25 10:58:27 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:58:29 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:59:29 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:59:29 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:9136)
12/07/25 10:59:31 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
12/07/25 10:59:32 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:01:21 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
12/07/25 11:02:11 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
12/07/25 11:03:01 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672) [The connection SSL receive timed out]
12/07/25 11:03:01 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:03:02 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:04:02 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:04:02 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:6672)
12/07/25 11:04:04 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
12/07/25 11:04:04 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:05:14 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
12/07/25 11:06:04 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
12/07/25 11:06:54 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956) [The connection SSL receive timed out]
12/07/25 11:06:54 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:06:54 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:07:54 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:07:54 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:8956)
12/07/25 11:07:56 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:0)
12/07/25 11:07:57 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1656225949:4644)

Hi ,
It seems there is a clash of resources.There are rogue httpd processes left whenever OHS starts/restarts.File httpd.pid contains root httpd process and with the help of scoreboard file its communicated to child httpd processes.
1.check OPMN LOGS.
2.shutdown all process (OPMN infact)
3.pkill or kill -9 httpd
4.go to $ORACLE_HOME/opmn/logs/states and delete all files.
5.check no other HTTP server ports are being used by other processes.(restarting the server is better idea !).
6.CHECK ons.conf IF ANY ENTRIES ARE MISSING / MODIFIED - V IMP
6.Start OPMN and HTTP Server.
Edited by: anandk on Jul 25, 2012 10:17 AM
Edited by: anandk on Jul 25, 2012 10:19 AM
Edited by: anandk on Jul 25, 2012 10:20 AM

Oracle HTTP Server internal heartbeat process issue

Hi All,
I am having an Oracle HTTP Server configured in the front of Weblogic 11g. I just noticed that
in my HTTP Server access.log, there is an incoming new entry every 20 seconds like this,
127.0.0.1 - - [19/May/2010:08:09:57 -0400] "HEAD /index.html HTTP/1.1" 200 -
127.0.0.1 - - [19/May/2010:08:10:17 -0400] "HEAD /index.html HTTP/1.1" 200 -
127.0.0.1 - - [19/May/2010:08:10:37 -0400] "HEAD /index.html HTTP/1.1" 200 -
It appears that it is an internal background process in HTTP server that does this.
Does anybody know what this process is and how I can stop it or just stop it from adding this entry to the log?
Thanks,
John Wang

Roberto,
I checked the file opmn.xml and could not see anything related to this. However, I did find a link which addressed the issue and provided a way to stop it from writing the record in access.log.
How to stop DMS from writing to Access Log
Thanks,
John

HTTP Server Hangs on Long Running Process

Hi,
We are having an issue with our production environment where long running processes i.e. > 5 mins will cause the client application to stop responding. We notice that this is only affecting forms which has no activity during the busy period i.e. forms which call a back end DB procedure or function and waits for a response from the DB to say that the process is done.
Checking on the process itself from the DB shows that the process has completed successfully but somehow there's no response back to the client to say that it's completed. As a result, the client will be in busy status forever.
We are sure that the issue originates from the HTTP server because when we by-pass the HTTP server i.e. send the request directly to the Apps server, this behaviour is not happening.
By thew way, we are running on Oracle Forms 11g using Weblogic.
Changes made so far but to no effect:
maxBlockTime=1800000 (web.xml)
keepAlive=Off (httpd.conf)
Timeout=1800 (httpd.conf)
FORMS_TIMEOUT=60 (formsweb.cfg)
heartbeat=4 (formsweb.cfg)
Session-Timeout=30 (web.xml)
Can this be related to network configuration? If yes, what are the things to look for?
Thanks.

as the response came from the server your httpd service is not getting active for that you
need to keep the httpd service alive so that the response can be obeyed
just try this
keepAlive=On (httpd.conf)
..

Single Sign-on and HTTP Server not started

I have installed oracle9iAS on SuSE Linux Enterprise Server 8 (SLES 8) which is certified by Oracle to run oracle9iAS. Everything was working propely after installation but when I restarted the server, the listener, the iasdb instance, and the EM started properly but when I went to http://servername:1810 and clicked on start all i got them all started but the HTTP Server and the Single Sign-on. When I tried to start the HTTP Server individually i got the following error:
oracle.sysman.emSDK.util.jdk.EMException: The opmn request has failed. From opmn: HTTP/1.1 204 No Content Content-Length: 0 Content-Type: text/html Response: 0 of 1 processes started. Check opmn log files such as ipm.log and ons.log for detailed.
I checked the log and its showing the following:
03/10/25 16:44:23 Connection 0,192.168.10.11,6200 message missing 'Content-Lengt
h'
GET /dms0/Spy?recurse=all&format=xml&operation=get&value=false&units=true&descri
ption=true&name=%2F HTTP/1.1
Host: linux2.future:6200
Connection: Keep-Alive, TE
TE: trailers, deflate, gzip, compress
User-Agent: RPT-HTTPClient/0.3-3
Cache-Control: no-cache
Pragma: no-cache
Accept-Encoding: deflate, gzip, x-gzip, compress, x-compress
I tried to start it from command line with the command
$dcmctl start -ct ohs
and it returned ADMN-906025
Anyone can help me solving this problem??

This error Can be caused by a syntax error in your httpd.conf file, check it / correct it try reloading OHS.
Ensure that emctl is not running when you run any dcmctl commands! If you have already run any dcmctl commands with emctl running that can cause your problem - if so to fix it solution is really to re-install.

HTTP Server fails to starts during E-Business installation

Hello All,
I am having issues installing e-business suite 12.1.1 on Oracle Linux 6.2.
I have applied all the correct packages (and a couple that were not listed in the installation instructions), applied required patches, upgraded the startCD version to the latest, run the md5sum checks on the Stage directory, and a bunch of manual stuff which it doesn't tell you to do in the installation notes, but you have to do to make it work, e.g. linking unzip 5.x from the startCD to /usr/bin/unzip. I thought that I had it cracked until it failed at the last HTTP Server checks.
I have attempted to restart services manually but it appears as though the HTTP server cannot start due to a missing library libdb-4.3.so:
HTTP_Server~1.log
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
*/u01/applR12/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb-4.3.so: cannot open shared object file: No such file or directory*
There was another post where a similar issue was resolved in a OEL 5 x86.x64 install by applying a i383 gdbm package, and linking the existing library as the document id which you posted suggested.
This package cannot be applied, as I have attempted.
I then started to look for the library which is reported in the logs as being missing, i.e. libdb-4.3.so. This does not appear to exist for OEL 6.
I then looked further afield and found a Centos 6.2 rpm which contained this library. I extracted this and linked it to the libdb.so.2 (patch 6078836).
I am getting the following from the adstrtal.log (I ran the cat command as root not adstrtal.sh which I ran as the application user):
*# cat /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adstrtal.log | grep Failed*
Web Application Services OACORE OC4J Instance <SID>_<HOST> adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance <SID>_<HOST> adformsctl.sh Failed
Web Application Services OAFM OC4J Instance <SID>_<HOST> adoafmctl.sh Failed
This is different to what I was seeing previously where all a 4 Web Application Services had failed
*# cat /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adstrtal.log | grep -v "status 0" | grep status*
adoacorectl.sh: exiting with status 150
adformsctl.sh: exiting with status 150
adoafmctl.sh: exiting with status 150
ServiceControl is exiting with status 3
Looking at the respective log files I am seeing the following:
adoacorectl.txt
*06/27/12-07:35:10 :: adoacorectl.sh version 120.13*
*06/27/12-07:35:10 :: adoacorectl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:10 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:10 :: adoacorectl.sh: exiting with status 150*
*================================================================================*
adformsctl.txt
*06/27/12-07:35:11 :: adformsctl.sh version 120.16*
*06/27/12-07:35:11 :: adformsctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:11 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:11 :: adformsctl.sh: exiting with status 150*
*================================================================================*
adoafmctl.txt
*06/27/12-07:35:11 :: adoafmctl.sh version 120.8*
*06/27/12-07:35:11 :: adoafmctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:11 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:11 :: adoafmctl.sh: exiting with status 150*
*================================================================================*
Running adapcctl.sh by itself I am seeing the same issue reported in the log files:
*$ ./inst/apps/<SID>_<HOST>/admin/scripts/adapcctl.sh start*
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adapcctl.txt for more information
Looking at the log file I can see the following:
*06/27/12-08:15:27 :: adapcctl.sh version 120.7.12010000.2*
*06/27/12-08:15:27 :: adapcctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-08:15:27 :: adapcctl.sh: starting OPMN managed OHS instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-08:15:27 :: adapcctl.sh: exiting with status 0*
*================================================================================*
I have attempted to restart opmn using adopmnctl.sh, which was unsuccessful. Looking at the HTTP_Server~1.log I can see the following the error:
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
*/u01/applR12/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb-4.3.so: cannot open shared object file: No such file or directory*
Has been replaced by the recurring message:
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
Syntax error on line 264 of /u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/conf/httpd.conf:
Cannot load /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so into server: /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so: undefined symbol: dbm_firstkey
Looking at line 264 of httpd.conf I can see the following:
LoadModule ossl_module libexec/mod_ossl.so
Which looks fine when compared to the rest of the file.
I am not able to look at the /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so.
I do not know where else to go with this now. Any guidance which you could provide would be very much appreciated.
Regards,

Hello Hussein,
Thank you for getting back to me! As per the installation instructions it states the following:
# cd /usr/lib
# ln -s libdb-4.7.so libdb-4.3.so
However there is no libdb-4.7.so library there to link to.
I have installed the db4 i686 & x86_64 packages which contain this library, then performed the above. I then ran the adstrtal.sh command which completed without incident.
As such the Required Packages in the installation instructions should be updated to include the following:
db4.i686
db4-devel.i686
db4.x86_64
db4-devel.x86_64
Regards,

Question regarding Listener and Server Processes in dedicated server mode

Good morning,
The Oracle documentation states that when a client connection request is received on the server, the Listener creates a Server Process which will work with the database instance to carry out the tasks requested by the user/client process. So far, everything good.
Now, when the user is at the Oracle server itself, the Listener does not need to be running to establish a connection to the database. It is therefore possible to stop the Listener and still connect using sqlplus and a valid username and password.
In the above case, the question is: if the Listener is not running, what/who created the Server Process that communicates with the database instance on behalf of the user ? Stated a different way, in the normal case, the Listener would get the request and create the server process. When the Listener is not running what part of Oracle gets the requests and creates the server process ?
Clarification on how this case is handled is much appreciated, thank you,
John.

When using bequeath protocol the server process is created by the client process: it's the client process that is using ORACLE_SID and ORACLE_HOME to compute shared memory key (under UNIX) to know which SGA to attach (i.e. which instance to connect to):
Example with SQL*Plus :
$ ps -fu oracle | grep DB112
oracle    5675     1 0 18:13 ?        00:00:00 ora_pmon_DB112
oracle    5677     1 3 18:13 ?        00:00:02 ora_vktm_DB112
oracle    5681     1 0 18:13 ?        00:00:00 ora_gen0_DB112
oracle    5683     1 0 18:13 ?        00:00:00 ora_diag_DB112
oracle    5685     1 0 18:13 ?        00:00:00 ora_dbrm_DB112
oracle    5687     1 0 18:13 ?        00:00:00 ora_psp0_DB112
oracle    5689     1 0 18:13 ?        00:00:00 ora_dia0_DB112
oracle    5691     1 0 18:13 ?        00:00:00 ora_mman_DB112
oracle    5693     1 0 18:13 ?        00:00:00 ora_dbw0_DB112
oracle    5695     1 0 18:13 ?        00:00:00 ora_lgwr_DB112
oracle    5697     1 0 18:13 ?        00:00:00 ora_ckpt_DB112
oracle    5699     1 0 18:13 ?        00:00:00 ora_smon_DB112
oracle    5701     1 0 18:13 ?        00:00:00 ora_reco_DB112
oracle    5703     1 0 18:13 ?        00:00:00 ora_mmon_DB112
oracle    5705     1 0 18:13 ?        00:00:00 ora_mmnl_DB112
oracle    5707     1 0 18:13 ?        00:00:00 ora_d000_DB112
oracle    5709     1 0 18:13 ?        00:00:00 ora_s000_DB112
oracle    5745     1 0 18:13 ?        00:00:00 ora_arc0_DB112
oracle    5747     1 0 18:13 ?        00:00:00 ora_arc1_DB112
oracle    5749     1 0 18:13 ?        00:00:00 ora_arc2_DB112
oracle    5751     1 0 18:13 ?        00:00:00 ora_arc3_DB112
oracle    5753     1 0 18:13 ?        00:00:00 ora_qmnc_DB112
oracle    5769     1 1 18:13 ?        00:00:00 ora_cjq0_DB112
oracle    5773     1 0 18:13 ?        00:00:00 ora_q000_DB112
oracle    5775     1 0 18:13 ?        00:00:00 ora_q001_DB112
oracle    5777     1 1 18:13 ?        00:00:00 ora_vkrm_DB112
oracle    5785     1 46 18:13 ?        00:00:24 ora_j003_DB112
oracle    5797 5796 2 18:14 ?        00:00:00 oracleDB112 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle    5832 5801 0 18:14 pts/2    00:00:00 grep DB112
$ ps -fp 5796
UID        PID PPID C STIME TTY          TIME CMD
oracle    5796 5584 0 18:14 pts/1    00:00:00 sqlplusThis is also documented in 11.2 Net Admin. Guide http://download.oracle.com/docs/cd/E11882_01/network.112/e10836/concepts.htm#CIAFHAEE
>
If the client and database exist on the same computer, then a client connection can be passed directly to a dedicated server process without going through the listener. This is known as a bequeath protocol. The application initiating the session spawns a dedicated server process for the connection request. This happens automatically if the application used to start the database is on the same computer as the database.
>
Edited by: P. Forstmann on 5 sept. 2010 18:23

HTTP Server is not currently supported with Solaris 10

I am having a problem to start the HTTP Server on Solaris 10 (I am installing HTTP Server as part of HTMLDB installation on Solaris 10).
I had a problem to install it at first, however I've found on 'AskTom' that unsetting ORA_NLS33 helps and it did. Now I can't start the HTTP server and I've found on metalink that 'HTTP Server is not currently supported with Solaris 10, this is targeted for Q2CY05'.
Has this been fixed yet?
Thank you for your time.
DanielD

Hi james,
I have checked the log file but i am unable to find what to do next.
I am giving the small piece of content of the log file. The following messages are repeating again and again...
Log content:-
07/09/23 17:20:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:26 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:30 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:40 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:44 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:42 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:28:57 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:29:01 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd

Oracle database (10.2.0.4) and HTTP server / HTML DB conflict

Hi there,
I installed a fresh 10.2.0.1 (patched with 10.2.0.4) oracle database on Oracle Entreprise linux 5.7, and HTTP server + HTML DB products from the companion CD. Both are located in different home directory:
ODB: $ORACLE_BASE/product/10.2.0/db_1
APEX: $ORACLE_BASE/product/10.2.0/apex
I just discovered that logs files ($APEX/opmn/logs/) have filled up my entire disk this week end. After some googling / digging, I've read that there is a conflict between the ONS services that run for both products on the same port. Opening the configuration files of both products:
+$ODB/opnm/conf/ons.config+
+$APEX/opnm/conf/opnm.xml+ (btw, ons.conf is empty)
I indeed saw that they both use port 6113 as local port and 6200 as remote port. The workaround I've found in variuos places is to either change the port number, or unsuscribe ONS for the database listener (and sometimes both).
Question 1: what is the best solution ? what are the consequences for the database listener in case of unsuscribtion ?
I also saw that opnm.xml in APEX configuration file is making use of the $ORACLE_HOME environment variable, which I define in my /etc/profile as $ORACLE_BASE/product/10.2.0/db_1. So I guess the opnm of APEX is looking at the wrong place... Yet if I change ORACLE_HOME in my /etc/profile, I won't be able to run dbstart upon stgartup, as it is run using ORACLE_HOME in a init.d script...
Question 2: Can someone clarify things up about the exact relationship between oracle database and HTTP server ? How should I deal with ORACLE_HOME environment variable, which one use it and when... ?
Note that I'm completely new to Oracle (and hence APEX).
Thanks in advance!

Billy Verreynne wrote:
There should be no conflicts - except for configuration ones.
Oracle is multi home capable. Thus multiple Oracle s/w products installed into different homes and these products running side by side.
The conflict is system resources - like a TCP port. That port cannot be shared by multiple processes. So you need to make sure that each s/w component that needs a TCP listener end-point, has a unique port number allocated for it to use.
As mentioned, the Oracle Apache server is an Oracle client with respect to Oracle client-server architecture. It simply needs a client OCI driver to connect to the Oracle database instance. So whether you run Oracle Apache on the same server as the database instance, or on another server all together - this makes no difference. The Oracle Apache s/w will be using its home for running. It has no need for anything from the database instance's home directory. Thus there are no conflicts - as long as you correctly keep them separated and not set the wrong home for the wrong component or include the wrong path (to another home's executables).
OK, so to summarize a bit:
- I should just be carefull when running startup script which will launch all services upon startup, i.e. changing the value of ORACLE_HOME before running each product startup script (dbstart => ORACLE_HOME = (..)/10.2.0/db_1, opmnctl => ORACLE_HOME = (..)/apex). I'm still quite worried because ORACLE_HOME is heavily used in opmn.xml but anyways.
- That's basically it: when each product's services are running, they do not use ORACLE_HOME (and such) anymore, hence no conflict from this point of view.
Also do not attempt to use IPC connectivity between the mod_plsql Apache module and the database instance. Does not make sense ito performance. Shared server should be considered and localhost TCP connectivity can be used.Well as I don't really know IPC yet, so hopefully I won't get into troubles. Just to be clear about that, i've this in my listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = apex.nwk)(PORT = 1521))
Does that mean that ICP will be used somehow ?
Thanks again from your help.
Edited by: lv on 27 févr. 2012 06:42

Error calling a webservice from one server process of the cluster

Hi ,
I have a servlet which on startup makes a call to a webservice. I deploy this webapp on the cluster.
The cluster has two instances each instance having one server process.
So when the server restarts one server process on one instance calls the web service the other process on other instance fails with a 503 response code.
When I tried to reproduce the same problem using two server processes on the same instance both processes are able to call the webservice properly.
I am slightly confused as to how different the second scenario is from first one as both are individual server process and may or may not run on same instance.
Can anyone tell me the real cause.
Rgds
Shashank

Hi Rajat,
This is how the default trace looks
FATAL: Application Servlet failed to notify devices.
Caught java.rmi.RemoteException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1289)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1298)
     at com.om.ApplicationServlet$NotifyDevices.run(ApplicationServlet.java:86)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:980)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1282)
     ... 2 more
java.lang.NoSuchMethodError
at java.lang.Thread.destroy(Thread.java:779)
     at com.omApplicationServlet$NotifyDevices.run(ApplicationServlet.java:92)
Rgds
Shashank

HTTP Server - Win2K and Oracle 8.1.7 and 9iAS

I have a problem with the APACHE WEB SERVER on Windows 2000 Server. It does not come up - I get "error 1067 - process terminated unexpectedly". I have installed Oracle 8.1.7 and installed 9iAS with no errors, using the 101 Web Apps book. However, I get the above error. Also, when I go to a dos prompt, I got "Can't locate Cwd.pm in @INC (@INC contains: .) at (eval 1) line 1."
Many reboots and reinstalls later with no errors and perusing this site, I have had no luck - I am an expert now in installing and wiping clean of Oracle... I would appreciate if any of you can assist me over the edge (I mean, over the top)...
null

So, here we are. I have Oracle 8.1.7 on the Windows 2000 server. I have tried everything, including dropping everything twice, trying to install 9iAS portal - then installing Portal 3.0.8. Even just trying to use the HTTP server from 8i. I continue to get the Error 1067 from the Win2K services trying to start the HTTP server. When I go to the prompt and run apache.exe from the apache\apache directory, I get a "Can't locate Cwd.pm in @INC (@INC contains: .) at (eval 1) line 1." message.
HELP!!

HTTP Server process dies

Similar Messages

Maybe you are looking for