HTTP to ABAP Proxy - Problem with "Current User" parameter

Hi experts,
We have a HTTP to ABAP proxy sceario, where I used an HTTP Destination to connect to the proxy.
We're trying to use the option "Current User" in that destination in order to login to ECC with the same user that in PI adapter plain.
The user exists i both systems, PI and ECC, with the same password.
Checking that parameter we get the following error:
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>INTERNAL.UNAUTHORIZED</SAP:Code><SAP:P1>401 </SAP:P1><SAP:P2>Unauthorized</SAP:P2><SAP:P3>(See attachment HTMLError for details)</SAP:P3></SAP:Error>
We think that PI is not getting the password.
Does aybody know how to do this?
Thanks and regards,
LUIS B.

Hi Chirumamilla,
If we put user and password in SM59 (unchecking "Current User") the commuication works without problems.
We don't want to leave a user set there, beacuse we are looking to access to PI with different users and login to ECC with the same user.
Thanks,

Similar Messages

File to ABAP Proxy (problem with inbound queues in R3)

Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup

Http to Abap Proxy communication with multiple queues generation in Recevr

Dear SDNs,
I need some help in the following scenario, appreciate your suggestions and help .
I am receiving the messages from sender to PI on http posting, from PI I am sending the message to SAP system using receiver xi communication channel ( receiver is abap proxy).
Sender will send the messages in QOS=EOIO, QUEueID=XXXt_100 etc parameters, when large volumes cases, it is getting delayed to process it using a single queue.
We are thinking to dynamically generate multiple queues in PI and send the same queue ids to receiver SAP system to process all the messages quickly in SAP System also.
Help /Clarifications needed:
1. XI receiver communication channel in pi does not provide any options to generate dynamic queue id based on payload content (using dynamic configuration) and sent it to SAP.
2. Module Tab in receiver communication channel also got disabled to add custom adapter modules, can we add custome adapter module on xi receiver channel to generate dynamic queue id ?
Really appreciate your immediate help and suggestions.
Thanks.
Suraj.

Dear Praveen,
Thanks lot for the immediate reply, we need to use EOIO, as the messages need to be processed in the same order we send and receive, there is no flexibility in QOS=EOIO, Appreciate if there is any other thoughts?
Thanks In Advance.
Suraj.

Set "peoples or groups" field with current user "login name" in sharepoint list form using javascript

hi friends
i am trying to set peoples or groups field in sharepoint list form with current user login name
here my code
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
$(document).ready(function NewItemView () {
var currentUser;
   if (SP.ClientContext != null) {
      SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser, 'SP.js');
   else {
      SP.SOD.executeFunc('sp.js', null, getCurrentUser);
   function getCurrentUser() {
      var context = new SP.ClientContext.get_current();
      var web = context.get_web();
      currentUser = web.get_currentUser();
      context.load(currentUser);
      context.executeQueryAsync(onSuccessMethod, onRequestFail);
   function onSuccessMethod(sender, args) {
      var account = currentUser.get_loginName();
      var accountEmail = currentUser.get_email();
      var currentUserAccount = account.substring(account.indexOf("|") + 1);
   SetAndResolvePeoplePicker("requester",account);
// This function runs if the executeQueryAsync call fails.
   function onRequestFail(sender, args) {
      alert('request failed' + args.get_message() + '\n' + args.get_stackTrace());
function SetAndResolvePeoplePicker(fieldName, userAccountName) {
   var controlName = fieldName;
    var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
    var peoplePickerEditor = peoplePickerDiv.find("[title='" + controlName + "']");
    var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
    peoplePickerEditor.val(userAccountName);
    spPeoplePicker.AddUnresolvedUserFromEditor(true);
</script>
but it is not working
please help me

Hi,
According to your post, my understanding is that you wanted to set "peoples or groups" field with current user "login name" in SharePoint list form using JavaScript.
To set "peoples or groups" field with current user "login name”, you can use the below code:
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
function SetPickerValue(pickerid, key, dispval) {
var xml = '<Entities Append="False" Error="" Separator=";" MaxHeight="3">';
xml = xml + PreparePickerEntityXml(key, dispval);
xml = xml + '</Entities>';
EntityEditorCallback(xml, pickerid, true);
function PreparePickerEntityXml(key, dispval) {
return '<Entity Key="' + key + '" DisplayText="' + dispval + '" IsResolved="True" Description="' + key + '"><MultipleMatches /></Entity>';
function GetCurrentUserAndInsertIntoUserField() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
this._currentUser = web.get_currentUser();
context.load(this._currentUser);
context.executeQueryAsync(Function.createDelegate(this, this.onSuccess),
Function.createDelegate(this, this.onFailure));
function onSuccess(sender, args) {
SetPickerValue('ctl00_m_g_99f3303a_dffa_4436_8bfa_3511d9ffddc0_ctl00_ctl05_ctl01_ctl00_ctl00_ctl04_ctl00_ctl00_UserField', this._currentUser.get_loginName(),
this._currentUser.get_title());
function onFaiure(sender, args) {
alert(args.get_message() + ' ' + args.get_stackTrace());
ExecuteOrDelayUntilScriptLoaded(GetCurrentUserAndInsertIntoUserField, "sp.js");
</script>
More information:
http://alexeybbb.blogspot.com/2012/10/sharepoint-set-peoplepicker-via-js.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Problems with current version of AIR. Won't load and also can't uninstall

I have recently purchased a new Mac and loaded the most recent version of AIR but now when I try to run it I keep getting the following message
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
I am also getting this message when I try and run the uninstaller so I can I can try and re-install.
Does anyone have any suggestions?
Thanks.

I had AIR 3 on my MacBook Pro before I updated it to Lion. I use AIR 3 to run McMillan Study guides Master your CDCs. when I updated my mac to lion and tried to run the application the application couldn't find AIR 3 on my mac. So I uninstalled it and tried to install it again. when I tried to install it the installer program doesn't open. please help me this program is crucial for my upgrade training.
From: lisachao <[email protected]>
To: A1C PD <[email protected]>
Sent: Monday, October 24, 2011 12:35 PM
Subject: Problems with current version of AIR. Won't load and also can't uninstall
Re: Problems with current version of AIR. Won't load and also can't uninstall created by lisachao in Installation Issues - View the full discussion
Is this the error you are getting when you are installing AIR 3.0? Or is this the error you are getting after you've already installed AIR 3.0 and attempting to run AIR applications? If it's the latter, which applications are you trying to run? Can you please send us your logs so that we can investigate further? Thanks!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3987820#3987820
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3987820#3987820. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installation Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Sync HTTP to ABAP proxy

Hi:
I am looking for a Sync HTTP to ABAP proxy scenario screenshots.
Can someone help?
Thnx

HI,
See the below links
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Chilla

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Problem with current scope forum

I have searched my computer for trojan downloader and it was found and removed however the search said having a problem with current scope.
Skin222

Hello Skin222,
Your problem is beyond the scope of support. This forum is for feedback and questions related to the current versions of the ADO.NET Entity Framework and LINQ to Entities including object-relational mapping and entity data modeling.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

When trying to download it pops up with a window saying with current user i may not be able to do everything and is asking for administrater password or continue with current user? when i click current user it does nothing and i dont know the password

when trying to download it pops up with a window saying with current user i may not be able to do everything and is asking for administrater password or continue with current user? when i click current user it does nothing and i dont know the password
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716)

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

Sneak Preview ABAP 2004s: Problem with HTTP-Server

Hi..
I have just installed the sneak preview.
Everything works well.
But there is a problem with the webdynpro
for abap. When i try to start the example
i become a message: "Windows can not find
://:/sap/bc/webdynpro/sap/wdt_quiz ....... "
This error is from the HTTP options.
In transaction SMMS over extert functiuns->http->display
the parameter http_status_code is -1.
Can anyone help me what i can do?

when you go into transaction SMICM->go to ->services you should atleast see one entry for HTTP
it will be something like below.
No. Protocol Service Name/Port Host Name Keep Alive Acti External Bind
1 HTTP 1081 xxxx.domain.com 30
i dont think that for this reason , you have to go for a reinstall, i am sure some config is missing.
Regards
Raja

HTTP to ABAP Proxy - Problem with "Current User" parameter

Similar Messages

Maybe you are looking for