HTTP Tunneling and Load Balancing with Weblogic Server 6.1

We use T3 for Java client to application server communication (Weblogic Server
6.1) and keep the session open for the life of the client. We many customers
using this with load balancers and all works fine. We have just started to use
BEA's HTTP tunneling and I have a question concerning how this will work with
load balancers. Since the single T3 connection has been replaced with a series
of stateless HTTP connections, does the BEA tunneling code put session information
in the HTTP header? If so, what information does it place in the header. If
it does we should be able to use that to make sure that the load balancer always
sends HTTP requests with that session to the same application server.
Thanks!
Rick

Rick,
You may want to look at the Alteon and F5 configuration we have on edocs.
Take a look at the following URLs for a possible solution
http://edocs.bea.com/wls/docs61/cluster/alteon.html#591902
http://edocs.bea.com/wls/docs61/cluster/bigip.html#591902
Chuck Nelson
DRE
BEA Technical Support

Similar Messages

T3 Load Balancing with Weblogic Server 6.1

We are using rwo weblogic 6.1 servers A and B behind a load balancer with a DNS name (eg. www.loadbalancer.com). We are using T3 for Java client to application server communication. The client creates the Initial context with the load balancer url,creates remote objects using the context, closes the initial context and then tries to get a new initial Context. What we noticed is even though the client closes the first context and gets a new one, the client is always hooked on to only one server making load balancing ineffective. Is there a T3 configuration to release the connection when we close the context ? The documentation says only one T3 is established per client JVM.

Rick,
You may want to look at the Alteon and F5 configuration we have on edocs.
Take a look at the following URLs for a possible solution
http://edocs.bea.com/wls/docs61/cluster/alteon.html#591902
http://edocs.bea.com/wls/docs61/cluster/bigip.html#591902
Chuck Nelson
DRE
BEA Technical Support

Cache and Load Balancing with Oracle APEX Listener

Hi,
I intend to use only HTTP access.
How to implement a Cache and Load Balancing with the Oracle APEX Listener?
Is it possible to do with the the standalone running APEX Listener?
Thanks by advance for any tips/documentation/references.
Kind Regards.

Hi,
I think this question is best asked in the APEX Listener forum:
ORDS, SODA & JSON in the Database
Kind regards
Sandro

ACE 4710 and load balancing with sticky cookie

Configuring load balancing with SSL termination and stickiness for a couple of citrix xenapp servers. I'm doing a source-NAT as the ACE resides in the DMZ and these particular servers reside on the inside arm of the firewall. The ACE is in bridged mode to load balance web servers that reside in the DMZ. Everything seems to work just fine, but the cookie stickiness does not seem to be working.

Hi David,
As you may know, using Wireshark to look at an HTTPS capture is only useful if you've installed the server SSL key.This is why I find it easier to use something like LiveHTTPHeaders or HTTPWatch.
When using cookie-insert, the ACE will not create any dynamic cookie entries. It will simply create one static entry for each rserver with a cookie value, such as R3911631338, and any client that gets load balanced to that rserver will receive a cookie with that value. So what you see there is what is expected.
You are correct in that when using location cookies that the server supplies, the ACE will create a dynamic entry when it sees the server response with the cookie. The cookie is included in the server's response, and the ACE will look for the value as configured. The cookie will also be sent to the client. If the cookie is not in the server's first response, you will need enable persistence-rebalance so that it will look in subsequent server responses. If the browser opens new connections with that cookie, then the ACE will stick to the same server.
My suggestion would be to get sticky working with cookie-insert first. Then if that meets your needs, go with that permanently. If you need to use server cookies, then once cookie insert is working, migrate your sticky to cookie location.
Sean

Using StoneBeat WebCluster load balancing with WebLogic

          Hi,
          I have done some testing of WebLogic Server with my company's StoneBeat WebCluster
          distributed load balancing software. This might be one more option to consider
          as a load balancing solution for WLS. It is advanced in the sense that load balancing
          is really dynamic, there are no single-points of failure (distributed architecture)
          and there is a very good, configurable test subsystem that runs on each cluster
          node to check for overload situations, HW/OS failures, ...
          In the initial testing, the WebCluster load balancing works with WebLogic replication,
          although there are some cases that need mroe consideration (please see below).
          I had to get a patch to WLS6SP1 on NT to make WLS' multicast work when there are
          several NICs on the cluster nodes.
          However, there is one case which causes problems:
          - I have 3 cluster nodes
          - P: 2, S: 3 (SessionServlet = 1)
          - 2: offline - P: 3, S: 1 (SessionServlet = 2; WebCluster randomly selected a
          new node to handle the connection)
          - 2: online - P: 2, S: ? (SessionServlet = 3, WebCluster redistributes the load
          when a node goes online)
          - 2: offline
          - P: 3, S: 1 (__SessionServlet = 1__) NB!
          The log messages show that when node 2 comes back online it retrieves the replica
          from the secondary (node 1) and not from the primary (node 3). After a while (5-6
          minutes), node 3 tries to update the replica on node 1. Node 1 considers this
          a stale update request and removes the Primary 16... (node name) and then the
          secondary for 16... (the replicated object). Then there's a message (still on
          node 1) that it is unable to find object 16... Back on node 3 the primary for
          16... is removed.
          From the WLS6 documentation (under the discussion of using replication with external
          HW load balancing solutions) I thought that this case would have been handled:
          - it is stated that after the failure of a node, if the HWLB box sends the next
          request to a node where there is no replica, WLS is able to retrieve the replica
          - to be fair, this is what happens: when node 2 came back online, it retrieved
          the replica from node 1 (the secondary) - I suppose that there is an assumption
          that if a request arrives to a node without a replica, the primary __must have
          failed__
          Is there any way to get around this problem?
          Admittedly, WebCluster has a problem in that the stickyness of connections is
          not perfect: - when a node goes online, a connection that was correctly persisted
          (based on either source-ip or source-network address) may be moved to a new node
          since the load is redistributed. Our load balancing is very dynamic, but doesn't
          maintain a list of who is connected to which node when resistribution takes place
          Regards,
          Frank Olsen
          Stonesoft


Rick,
You may want to look at the Alteon and F5 configuration we have on edocs.
Take a look at the following URLs for a possible solution
http://edocs.bea.com/wls/docs61/cluster/alteon.html#591902
http://edocs.bea.com/wls/docs61/cluster/bigip.html#591902
Chuck Nelson
DRE
BEA Technical Support

Load Balancing with forms server 10g

Hello,
i've a cliente which is right now processing a migration from a client-server 6i platform (using Terminal Servers) to a forms 10g web platform with several Application Servers 10g in standalone.
At the end, client want to enable Load Balancing in order to have some manage at each Application Server load.
The idea to accomplish is to have an hardware Load Balancer. The client already has a CISCO CSS 11503 SSL.
Is there any documentation where i can check more info about the compatibility/configuration to this architecture.
Thanks for your attention.
regards,
Pedro Ribeiro

You can check this doc Link:[http://download.oracle.com/docs/cd/B14099_19/hpux.1012/install.1012/install/toc.htm]
It say all about it, and don't mention nothing about a Load Balancer, but I'll try tokeep searching.
Greetings.

Load balancing in Weblogic Server

Hi Team,
As per the Oracle WLS documentation,web logic cluster provides load balancing.
I want to know,how it can achieved in web logic server for clusters.
Any suggestions regarding the query is appreciated.
Thanks and Regards,
Arun K M

You may install the the Oracle HTTP server and use it as a load balancer.

HA and Load Balancing in Exchange Server 2010

Hi
My office just have 2 servers Exchange Standard 2010 (Licensed). I installed 3 roles on 2 servers (called Ex1 & Ex2). I configured Windows NLB for Hub Transport and Client Access. That 's fine.
But the maibox is seperated each server. Ex1 is main mailbox, so when Ex1 down, mailbox database will down too.
I 've read DAG solution but I just have 2 servers and it 's running WNLB. My office not enough cost to buy Hardware Load Balancer.
Does anyone have a solution for my problem ?
Thank you

Hi,
If you want to use DNS round robin, it is recommended to lower the TTL values of DNS records to 5 minutes.
DNS Round Robin has no automatic server failure detection. If a host goes down, Administrator will need to realize it, remove the DNS Record for the server that went down, and then clients will have to wait for the TTL value on the old DNS record to
expire.
Here is an article about DNS round robin for your reference.
http://www.shudnow.net/2010/03/17/exchange-2010-rtm-high-availability-load-balancing-options/
Best regards,
Belinda Ma
TechNet Community Support

CSS Load Balancing with Billing Server

Hi Gilles
Could I have a CSS load balancing two servers and also have it communicate with a billing server across the network. If yes then how can I do it?
Regards,
Sushil

the CSS does not have the notion of billing server. A separate device - like the CSG - should be used if you need to collect billing info.
Gilles.

How to set up load balancing with overload server on css

can anyone tell me how to set up a load balancing config on css that will enable me to LB proxy caches and when they have too many connections then LB against an overload proxy-cache.
Such that when the normal proxy-cache farm is under the ceiling of max connections then the overload server is not used ?
I don't think redirect or sorry server will do this ?

see the below configuration,any question,just tell me.
service proxy-1
! below is the real ip of server
ip address 10.1.1.1
keepalive type icmp
active
service proxy-2
ip address 10.1.1.2
keepalive type icmp
active
! enter owner config-mode
owner proxy
! define a content rule,match what you want to load balancing
content rule-proxy
! below is virtual ip,it can be another ip segment
vip address 10.1.1.50
add service proxy-1
add service proxy-2
protocol any
advanced-balance sticky-srcip
active

Failover and Load Balancing with JNDI Connection Pools

Hi,
I am trying to figure out how would JNDI Connection Pooling work along with failover or DNS Load Balancing.
Would connections be distributed equally among the list?
Would the pool work with multiple heterogeneous connections (i.e. connections to different but equivalent servers ), or do all the connections in the pool have to be homogeneous (i.e. to the same server)?
Thanks,
Sergio

Hi,
I am trying to figure out how would JNDI Connection Pooling work along with failover or DNS Load Balancing.
Would connections be distributed equally among the list?
Would the pool work with multiple heterogeneous connections (i.e. connections to different but equivalent servers ), or do all the connections in the pool have to be homogeneous (i.e. to the same server)?
Thanks,
Sergio

Load balancing with JSP

Anyone and everyone,
When configuring load balancing with Weblogic clusters, does load
balancing take effect for all services or just EJB and RMI? Or another
way of saying the same thing, can I setup weighted load balancing for
the JSP engines across 2 weblogic servers.
Thanks in advance,
Mike

The load-balancing documentation you read describing the different algorithms only applies to RMI stubs (e.g., EJB clients). Please see http://www.weblogic.com/docs51/cluster/concepts.html#1026091 for a description of how load-balancing/clustering works with servlets/JSPs.
The short answer is that in using servlet clustering, most people want/need/use in-memory replication for HttpSession objects. In WLS 5.1 (and before), in-memory replication requires one or more proxy servers be set-up in front of the cluster. Typically, most people use something like BigIP to load-balance
across the proxy servers and let the weblogic plug-in for the proxy server handle the routing to the cluster. The plug-in uses round-robin until an HttpSession is established for a user, then it always tries to route to the server where the user's session is located.
Hope this helps,
Robert
Brian Lin wrote:
All,
I have a quesiton here regarding load balancing with DNS round robin. As of Chapter Adminstration of Clustering Weblogic server, Weblogic can be configured to balance by weight. How about Weblogic handle weight based balancing after DNS round robin ip response? or just can choose one way instead of both?
What's the big difference between choosing BigIP and software balancing (WL)?
Brian
"Wei Guan" <[email protected]> wrote:
I don't think you can configure this load balancing in weblogic in current
release. However, if you have Big-IP or LocalDireoctr, you can set up
weighted load-balancing there. Otherwise, weblogic proxy will use DNS round
robin to do the load-balancing between JSP engins.
My 2 cents.
Cheers - Wei
Michael Yakimisky <[email protected]> wrote in message
news:[email protected]...
Anyone and everyone,
When configuring load balancing with Weblogic clusters, does load
balancing take effect for all services or just EJB and RMI? Or another
way of saying the same thing, can I setup weighted load balancing for
the JSP engines across 2 weblogic servers.
Thanks in advance,
Mike

Load Balancing with ALBPM 6.0

Hi -
We have had some challenges with load balancing in WebLogic Server 9.2.2 with ALBPM 6.0. We have tried to set the Front End HTTP host and ports on the cluster and individual hosts with no luck. Anyone else have a similar problem?

Hi PR,
Please take a look at the following link:-
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/28/75153a1a5b4c2de10000000a114084/frameset.htm
"You can only use the SAP message server for HTTP load distribution if
the browser is the direct client of the message server. If another
component lies between the client (browser) and the message server, (for
example, the portal), you cannot use the message server to distribute
the load."
When using the External ITS you could balance the load using the message server and logon groups. In 700 this functionality is not present if there is not a direct connection to the client (Firefox or IE). So you will have to install the webdispatcher to balance the load.
Hope this helps
Michael

Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application

Hi Expert,
I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
I would know if the NGINX must be used also for SMP 2.3.
Any suggestion/information is appreciated.
Thanks in advance
g.

Please see Agentry Network Landscapes

Cache and Load Balancing for the Oracle APEX Listener

Hi,
I intend to use only HTTP access.
My database is Oracle 11gR2, SE, 32 bit.
How to implement a Cache and Load Balancing with the Oracle APEX Listener?
Is it possible to do with the the standalone running APEX Listener?
Thanks by advance for any tips/documentation/references.
Kind Regards.

Error. To be closed.

HTTP Tunneling and Load Balancing with Weblogic Server 6.1

Similar Messages

Maybe you are looking for