HTTPS: Error RWB components monitoring

Hi
After implementing HTTPS, when trying display component monitoring in RWB, the follwoing error displayed.
Error during communication with System Landscape Directory: Unable to open SSL connection to host "myhost.mydomain.com:50101". Server certificate rejected by ChainVerifier.
What shall I do? RWB was perfectly ok with HTTP.
Any help is very much appreciated.
Thank you
//Jack

Hi,
There is a thread which had similar discussion-
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/3344d3360ab24ab70d7155e356c988/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/90220b1c034eb6af10e123ca419f58/content.htm
Hope this helps,
Regards,
Moorthy

Similar Messages

Error on Component Monitoring On RWB after changing SLD .

Hi,
Guys If my below given questions are not clear to You ... >>>>>>>>>>>>Do ask me for Clearity
My PI 7.0 System was on Local SLD earlier, at that time My Scenarios/ RWB Components were Working Fine.
Now, On Place of Local SLD, We are onto Centerlise SLD on SOLUTION Manager.
after few Changes now my ESR and ID are getting product and Buisness System from Solution manager's SLD.
but ................. >>>>>>>>>>>
>
>>
>>>>
>>>>
On RWB - Component Monitoring - Each Component is coming into Red/Error mark.
So ..
Question : Is RWB is also effected from SLD Changes ???????
r
Facts Found during troubleshooting : -
>
1. In Solution Manager's SLD - Technical System - Exchange Infrastructure - Only one Technical System is Coming for Integration Server.
while
IN Old Local SLD - Technical System - Exchange Infrastructure - 6 different tecnical system was coming ( Integration Server/ RWB / Integration Engine / Adapter Engine ...etc)
Can this be the reason ????????
Please Suggest, What is Missing ?
for Sld Change following steps are performed .. .. . .
1. PI 7.0 like User Creation in Solution manager.
2. Changes in SLDAPICUST in PI System.
3. Changes Done in Excange Profile for SLDNAME.
4. Changes Done in Virtual Manager for SLDNAME.
5. RZ70 on new SLD.
Regards

Hi ,
Solution : After changing Local SLD to Domestic SLD , Error was Coming in RWB - Components ...
Solved by :
These are Documents Used for doing Changes in SLD When found Error on RWB.
764176 - Error in XI due to inconsistent SLD contents.
1031321 - Self-Registration of Adapter Engine and RWB fails
Problem has been solved.

Error in RWB Component Monitoring ... "Domain ???"

Hello Everyone!
A problem suddenly popped up in our SLD. When I navigate to RWB > Component Monitoring... I can no longer click on the "Integration Server" The Domain shows "Domain ???" would anyone know what could be the problem?
Warm regards,
Glenn

Hi Glenn,
Please check your BS for the XI in the SLD and verify you have specified the pipeline url properly:
http://<host>:<port>/sap/xi/engine?type=entry
you can find the http port in SMICM --> GOTO-> SERVICES
In addition to that Verify (in XI) SXMB_ADM --> IE config --> IS URL.
you should have the same url here.
Hope it helps..
Kumar.S
Message was edited by:
Kumar.S
Kumar.S.V

SXI_CACHE vs. RWB Cache Monitoring

I'm familiar with the functionalities of transaction SXI_CACHE, as I've used it on a previous project. However, I have not used the Cache Monitoring function in the RWB, and was curious what the differences were. When would you prefer to use one over the other?
I've reviewed the How To Handle Cache in XI30, but the only thing that was specified about RWB Cache Monitoring was that you would choose between Software Components and Mapping Programs. I am still unclear as to what else is available.
Thanks in advance!

Hi Daniel,
See these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/2fd93f130f9115e10000000a155106/frameset.htm
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 -- Monitoring in XI 3.0 ( see cache monitoring)
cheers,
Prashanth
P.S Please mark helpful answers

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

Error in Message Monitoring in XI.

Hi All
Affter clicking Message Monitoring in RWB there is DETAIL button above the message listed when i am trying to click on the detail button it shows the error like "The page cannot be displayed".
pls help me .
Thaking you in advance.

Hi Hiren,
Plz check below mentioned blog. It will help you out:
<a href="/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi:///people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Subhasha

Getting HTTP Error 403 in Adaptor Engine Archival

Hi,
Getting below error
Cannot read archived messages; reason: Reading Messages from Archive failed. Reason: java.lang.Exception: XML DAS SELECT command failed with ErrorCode: 403; ErrorText: <!DOCTYPE HTML PUBLIC
I went through below blog but still issue is there,
Http* Errors in XI
Thanks

http://server name:port/rwb, click message monitoring-- select msg. from component Adaptor Engine <SID> from Archive click display then click on start, getting below error
"Cannot read archived messages; reason: Reading Messages from Archive failed. Reason: java.lang.Exception: XML DAS SELECT command failed with ErrorCode: 403; ErrorText: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><html><head> <title>Error Report</title><style>td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}A:link A:visited A:active </style></head><body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"><table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"><tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> 403 &nbsp Forbidden</td></tr><tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23">SAP NetWeaver Application Server 7.10 / AS Java 7.10 </td></tr><tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td></tr></table> You are not authorized to view the requested resource.<table><tr><td valign="top"> Details:</td><td valign="top"><PRE>No details available</PRE></td></tr></table></body></html>"
But it's working fine when I select Database instead of Archive,
thanks

Alerts for SXMB_MONI mapping errors, RWB errors

Hi,
We are having solman 7.0 with EHP1/oracle on HP-UX.
I have to configure CCMS alerts for SXMB_MONI mapping errors, RWB errors for PI system(SAP EHP 1 for SAP NetWeaver 7.1).
I cant find any MTE related to SXMB_MONI mapping errors or RWB errors under the PI system in my CEN.
So, can anyone please guide me to configure this?
Thanks
Nanda

Hello Nanda,
you have to configure ALert Categories in the Alert Framework (ALM) before any MTE are shown in CCMS. And then you would see the MTE in the local CCMS of your PI system.
Configuration steps are descirbed in the PDF "Setup Guide for Interface Monitoring" under http://service.sap.com/bpm > Media Library > Technical Information. In thisdocument you can also learn how the CCMS MTEs can be integrated with Business Process Monitoring in SAP Solution Manager. And actually BPMon provides some new monitoring capabilites for the Java part of PI that are not covered via CCMS at all.
Best Regards
Volker

ON RWB - CC Monitoring - SOAP Channel. status says "inactive or unregister

Hi,
I am working on SOAP Webservices.
My Scenario is working fine ... But Some How on RWB - CC Monitoring - SOAP Channel. status says "inactive or unregistered".
On the otherside , my SOAP Scenario is working fine...
But why for that status " "inactive or unregistered"." , I dont Know?
Please Suggest, How to Deal with this ........?
I executed transaction code " se38 - > SRT_ADMIN_CHECK report "
It states me almost every thing unregistered/ inactive/ not configured except ICM Services ..
are these services shoud active and registered for SOAP Scenario?
how to activate them .............????????
That CC status " "inactive or unregistered" has anything to do with this SRT_ADMIN_CHECK report????
Regards
Prabhat Sharma.

Hi
This is the problem which i recently faced and solved.
Cause: Saop related J2EE application are stoped or not set to default start as initial state.This is also a reason
 for 503 service unavailable error while soap posting.
Solution : start the J2EE app , com.sap.aii.adapter.soap.app & com.sap.aii.adapter.soap.lib set them as defualt started
 as initial state.
Where : If you are in PI 7.1 , http:<host>:<port>/nwa->Operations Management -> Systems -> Start & Stop -> Java EE
 Applications.
 Refer http://wiki.sdn.sap.com/wiki/display/XI/start_stop_applications for more help.
 Also in Start button , there will be a dropdown where you can set the default initial state as started.Simply starting may
 cause similar problem ( not registered ????????) again ,so better to set initial as started state.
Regards,
$rinivas

RWB - message monitoring

In RWB - Messge Monitoring,
for the Message from Component drop-down, I selected Adapter Engine on XXXXX.
and for From drop-down, I selected Data Base
After this step, selecting Display gives the page can not be displayed.
What could be the problem.
-Naveen.

Satish,
when i have typed in this:
http://hostname:portnumber/AdapterFramework/monitor/monitor.jsp
A message is displayed saying the following:
AdapterMonitor redirect
The Adapter Monitor page was moved to the Runtime Workbench.
Please follow these steps to open the Adapter Monitor:
open the Runtime Workbench start page
choose Component Monitoring and select components with status all
select the appropriate Adapter Engine
click on the button Adapter Monitoring
When I have done that it is giving that page can not be displayed.
Please help.
-Naveen.

Oracle epm 11.1.2.2 http error

I installed (personal installation) and configured 11.1.2.2. Installation was successful. Configuration only partly successful as most of the errors point to http error and unable log on to workspace. It brings up a java.net error.
Can you help please?

( Apr 4, 2013 5:12:40 PM ) Configuration tasks state test successfully completed.
( Apr 4, 2013 5:12:40 PM ) - passed: Validating that configuration tasks have been completed
( Apr 4, 2013 5:12:40 PM ) DB Connectivity test for repository successfully completed.
( Apr 4, 2013 5:12:40 PM ) - passed: Checking connection to database jdbc:oracle:thin:@RATNAP01:1521:FUSION
( Apr 4, 2013 5:12:43 PM ) Web Applications check failed.
( Apr 4, 2013 5:12:43 PM ) - failed: Availability of Web application context http://RATNAP01:9000/aif/faces/setup/Main.jspx
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
( Apr 4, 2013 5:12:43 PM ) - failed: Availability of Web application context http://RATNAP01:9000/oracle-epm-erpi-webservices/RuleService
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
( Apr 4, 2013 5:12:49 PM ) External Providers check successfully completed.
( Apr 4, 2013 5:12:49 PM ) - passed: Check Native Directory external authentication provider configuration
( Apr 4, 2013 5:12:53 PM ) Login check failed.
( Apr 4, 2013 5:12:53 PM ) - failed: Checking availability of login http://RATNAP01:9000/interop/logon
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 404
( Apr 4, 2013 5:12:58 PM ) Missed registry links check successfully completed.
( Apr 4, 2013 5:12:58 PM ) - passed: Checking that all components in the registry have a link to host
( Apr 4, 2013 5:12:58 PM ) Datasource entries existence successfully completed.
( Apr 4, 2013 5:12:58 PM ) - passed: Checking if datasource property exists in the registry
( Apr 4, 2013 5:12:58 PM ) Datasource entries existence failed.
( Apr 4, 2013 5:12:59 PM ) Datasource entries existence successfully completed.
( Apr 4, 2013 5:12:59 PM ) - passed: Checking if datasource property exists in the registry
( Apr 4, 2013 5:13:00 PM ) Datasource entries existence failed.
( Apr 4, 2013 5:13:02 PM ) Web Server Registry check successfully completed.
( Apr 4, 2013 5:13:02 PM ) - passed: Checking if Web Server linked to the all Web Applications
( Apr 4, 2013 5:13:02 PM ) Shared library targeting test failed.
( Apr 4, 2013 5:13:13 PM ) Checking if registry database compy with taxonomy. successfully completed.
( Apr 4, 2013 5:13:13 PM ) - passed: All components comply with registry taxonomy.
( Apr 4, 2013 5:13:13 PM ) System path variable length test successfully completed.
( Apr 4, 2013 5:13:13 PM ) - passed: Checking whether system path variable length exceeds 2,000
( Apr 4, 2013 5:13:13 PM ) CSS Status Check failed.
( Apr 4, 2013 5:13:13 PM ) - failed: Validating that CSS has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=CSS
( Apr 4, 2013 5:13:14 PM ) CES Status Check failed.
( Apr 4, 2013 5:13:14 PM ) - failed: Validating that CES has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=CES
( Apr 4, 2013 5:13:14 PM ) Audit Status Check failed.
( Apr 4, 2013 5:13:14 PM ) - failed: Validating that Audit has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=AUDIT
( Apr 4, 2013 5:13:14 PM ) LCM Status Check failed.
( Apr 4, 2013 5:13:14 PM ) - failed: Validating that LCM has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=LCM
( Apr 4, 2013 5:13:15 PM ) HUB Status Check failed.
( Apr 4, 2013 5:13:15 PM ) - failed: Validating that HUB has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=HUB
( Apr 4, 2013 5:13:15 PM ) Registry Status Check failed.
( Apr 4, 2013 5:13:15 PM ) - failed: Validating that Registry has been initialized
Error:java.io.FileNotFoundException: http://RATNAP01:9000/interop/status?component=REGISTRY
( Apr 4, 2013 5:13:15 PM ) Product registry component test successfully completed.
( Apr 4, 2013 5:13:15 PM ) - passed: Checking if product has only one product node in registry.
( Apr 4, 2013 5:13:18 PM ) Product registry component test failed.
( Apr 4, 2013 5:13:25 PM ) EPMA DimensionServer Server Configuration successfully completed.
( Apr 4, 2013 5:13:25 PM ) - passed: Validating EPMA Dimension Server hyperion-bpma-server startup... Successful...
( Apr 4, 2013 5:13:34 PM ) Check EPMA services individually failed.
( Apr 4, 2013 5:13:34 PM ) - failed: Validating whether jobmanager service is available.
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 500
( Apr 4, 2013 5:13:35 PM ) Essbase Studio Server failed.
( Apr 4, 2013 5:13:35 PM ) - failed: Validating Essbase Studio Server connection
Error:api.CPException.networkError
( Apr 4, 2013 5:13:40 PM ) Financial Management Web Service access test successfully completed.
( Apr 4, 2013 5:13:40 PM ) - passed: Checking accessibility of Web services on http://RATNAP01:80/HSFWebServices/HSFWebService.asmx.
( Apr 4, 2013 5:13:40 PM ) Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists. successfully completed.
( Apr 4, 2013 5:13:40 PM ) - passed: Found: 1.
( Apr 4, 2013 5:13:41 PM ) Check if IR BI Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR BI Services are available: IRBI_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:41 PM ) Check if IR Job Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:41 PM ) Check if IR DAS Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:41 PM ) Check if IR Log Services are available. successfully completed.
( Apr 4, 2013 5:13:41 PM ) - passed: All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:42 PM ) Check if the Reporting and Analysis Setup (RA_SETUP) component exists. successfully completed.
( Apr 4, 2013 5:13:42 PM ) - passed: Found: 1.
( Apr 4, 2013 5:13:42 PM ) Check if all required RAF properties exist under the Reporting and Analysis Setup component. successfully completed.
( Apr 4, 2013 5:13:42 PM ) - passed: All required properties exist.
( Apr 4, 2013 5:13:42 PM ) Check if the Agent Module (AGENT_MODULE) components exist. successfully completed.
( Apr 4, 2013 5:13:42 PM ) - passed: Found: 5.
( Apr 4, 2013 5:13:43 PM ) Check if the Reporting and Analysis Service (RA_SERVICE) components exist. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 20.
( Apr 4, 2013 5:13:43 PM ) Check if the Agent (AGENT) components exist. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 1. Hosts for the components: RATNAP01.
( Apr 4, 2013 5:13:43 PM ) Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 1.
( Apr 4, 2013 5:13:43 PM ) Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist. successfully completed.
( Apr 4, 2013 5:13:43 PM ) - passed: Found: 1. Hosts for the components: RATNAP01.
( Apr 4, 2013 5:13:44 PM ) Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT. successfully completed.
( Apr 4, 2013 5:13:44 PM ) - passed: Data in Registry and database are consistent.
( Apr 4, 2013 5:13:45 PM ) Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS). successfully completed.
( Apr 4, 2013 5:13:45 PM ) - passed: Data in Registry and database are consistent.
( Apr 4, 2013 5:13:45 PM ) Check if all required RAF properties exist under the RAF Logical Web App component. successfully completed.
( Apr 4, 2013 5:13:45 PM ) - passed: All required properties exist.
( Apr 4, 2013 5:13:45 PM ) Check if all required Workspace configuration files exist under the RAF Logical Web App component. successfully completed.
( Apr 4, 2013 5:13:45 PM ) - passed: All required files exist.
( Apr 4, 2013 5:13:46 PM ) Check if Agents are available. successfully completed.
( Apr 4, 2013 5:13:46 PM ) - passed: All Agents are available: Agent on ratnap01.
( Apr 4, 2013 5:13:46 PM ) Check if RAF Services are available. successfully completed.
( Apr 4, 2013 5:13:46 PM ) - passed: All RAF Services are available: RAF_AGENT_MODULE (Agent on ratnap01).
( Apr 4, 2013 5:13:47 PM ) Check if Repository data folder exists. successfully completed.
( Apr 4, 2013 5:13:47 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:48 PM ) Check if Job Factory data folder exists. successfully completed.
( Apr 4, 2013 5:13:48 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:49 PM ) Check if Service Broker data folder exists. successfully completed.
( Apr 4, 2013 5:13:49 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:50 PM ) Check if Event Server data folder exists. successfully completed.
( Apr 4, 2013 5:13:50 PM ) - passed: Data file locations are valid.
( Apr 4, 2013 5:13:50 PM ) Check if every Agent is associated with some Agent Module(s). successfully completed.
( Apr 4, 2013 5:13:50 PM ) - passed: Every Agent is associated with some Agent Module(s).
( Apr 4, 2013 5:13:51 PM ) Check if every Reporting and Analysis Service is associated with some Agent Module. successfully completed.
( Apr 4, 2013 5:13:51 PM ) - passed: Every Reporting and Analysis Service is associated with some Agent Module.
( Apr 4, 2013 5:13:52 PM ) Check if every Agent Module is associated with some Agent. successfully completed.
( Apr 4, 2013 5:13:52 PM ) - passed: Every Agent Module is associated with some Agent.
( Apr 4, 2013 5:13:52 PM ) Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s). successfully completed.
( Apr 4, 2013 5:13:52 PM ) - passed: Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
( Apr 4, 2013 5:13:53 PM ) Check if Agent Modules and corresponding Agents belong to the same host. successfully completed.
( Apr 4, 2013 5:13:53 PM ) - passed: Agent Modules and corresponding Agents belong to the same host.
( Apr 4, 2013 5:13:56 PM ) Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host. successfully completed.
( Apr 4, 2013 5:13:56 PM ) - passed: Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
( Apr 4, 2013 5:13:57 PM ) Check the possibility to login on Web Analysis Server. failed.
( Apr 4, 2013 5:13:57 PM ) - failed: An error occurred while running the check.
Error:An error occurred while running the check.
( Apr 4, 2013 5:13:57 PM ) Check connectivity between Web Analysis Server and Essbase Server. failed.
( Apr 4, 2013 5:13:57 PM ) - failed: An error occurred while running the check.
Error:An error occurred while running the check.
( Apr 4, 2013 5:13:58 PM ) Check connectivity between Web Analysis Server and Financial Management Server. failed.
( Apr 4, 2013 5:13:58 PM ) - failed: An error occurred while running the check.
Error:An error occurred while running the check.
( Apr 4, 2013 5:14:20 PM ) External repository access test successfully completed.
( Apr 4, 2013 5:14:20 PM ) - passed: Launch external checker with next command: C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
( Apr 4, 2013 5:14:36 PM ) External login test for IR successfully completed.
( Apr 4, 2013 5:14:36 PM ) - passed: Launch external checker with next command: C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
( Apr 4, 2013 5:14:36 PM ) Financial Management Application Server Configuration successfully completed.
( Apr 4, 2013 5:14:36 PM ) - passed: Validating Financial Management Server registration Successful...
( Apr 4, 2013 5:14:50 PM ) Financial Management Service Validation failed.
( Apr 4, 2013 5:14:50 PM ) - failed: Verify that the Financial Management service is working.
Error:EPMVLD-01024: The Financial Management service check failed: ERROR: Unable to CreateApplicationCAS
( Apr 4, 2013 5:14:52 PM ) Financial Management Web Server successfully completed.
( Apr 4, 2013 5:14:52 PM ) - passed: Validating Financial Management Web application connection Successful...
( Apr 4, 2013 5:14:54 PM ) SmartView Provider successfully completed.
( Apr 4, 2013 5:14:54 PM ) - passed: Validating Financial Management SmartView Provider connection Successful...
( Apr 4, 2013 5:14:57 PM ) LCM Provider successfully completed.
( Apr 4, 2013 5:14:57 PM ) - passed: Validating Financial Management LCM Provider connection Successful...
( Apr 4, 2013 5:15:16 PM ) Essbase Java API checker failed.
( Apr 4, 2013 5:15:16 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** RATNAP01:1423 Embedded
Error:EPMVLD-01011: Result 1; Error message: Message was not included in output, check logs for details.
( Apr 4, 2013 5:15:16 PM ) Check system-jazn-data.xml file for HIT entries successfully completed.
( Apr 4, 2013 5:15:16 PM ) - passed: All HIT entries are present in system-jazn-data.xml
COMP ID = oracle.EPMOHPS
Hyperion Provider Services - Release 11.1.2.2.100.2167
Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
connection mode : EMBEDDED
essbase.properties: essbase.properties
java System properties -DESS_ES_HOME: null
( Apr 4, 2013 5:15:29 PM ) Essbase server check failed.
( Apr 4, 2013 5:15:29 PM ) - failed: Validating Essbase Server connection to RATNAP01
Error:Cannot connect to olap service. Cannot connect to Essbase Server at "RATNAP01:1423". Network error [10061]: Failed to connect to [RATNAP01:1423]
( Apr 4, 2013 5:15:37 PM ) Essbase server check using MaxL failed.
( Apr 4, 2013 5:15:37 PM ) - failed: Validating Essbase Server startup using MaxL command
Error:EPMVLD-01010: Cannot connect to Essbase Server using MaxL.
( Apr 4, 2013 5:15:38 PM ) Module login test failed.
( Apr 4, 2013 5:15:38 PM ) - failed: Module test for Performance Management Architect with URL http://RATNAP01:9000/workspace/index.jsp?module=awb.awb
Error:com.hyperion.cis.utils.BadResponseCodeException: Bad response code with POST method: 404
( Apr 4, 2013 5:15:38 PM ) Web Server link test failed.
( Apr 4, 2013 5:15:48 PM ) EnumerateDimensions failed.
( Apr 4, 2013 5:15:48 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error:EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:15:59 PM ) EnumerateApplications failed.
( Apr 4, 2013 5:15:59 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error:EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:16:09 PM ) EnumerateDataSynchronizations failed.
( Apr 4, 2013 5:16:09 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error:EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:16:20 PM ) DimensionEditorLoadAdf failed.
( Apr 4, 2013 5:16:20 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error:DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
( Apr 4, 2013 5:16:29 PM ) ApplicationManagerLoadAdf failed.
( Apr 4, 2013 5:16:29 PM ) - failed: Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_29/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error:AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

HTTP Error 403 on NT 4.0

Hi,
We have just installed 5.0.1 SP 5 on an NT 4.0 (SP 4) box. We have been
successfully developing and unit testing on 5 different developer
machines for a few months, and are ready to have QA start testing.
We are using EJB's to connect to an Oracle DB (also residing on the same
machine).
I have moved our JAR files and JSP files over to the machine and tested
it from the deployment machine and from my own machine using:
"http://deploy:7001/product/index.jsp" (the "index.jsp" is in the
<wl>/myserver/public_html/product directory)
However, when my colleague -- on the same network -- tries to open the
same page he gets "HTTP Error 403" "You are not authorized to view this
page". I am also getting the same error when I VPN into our network.
The permissions on the directories and files are Full Control for
Everyone.
I suspect it may have to do with internal domain representations, but
I've been stumped and would appreciate it if anyone has some insight.
Thanks,
Peter

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the Oracle Technology Network (OTN) > Products > Database > Database - General forum.

HTTP Error 403 You are not authorized to view the requested resource

Hi Experts,
When I open the node "Hierarchie groups" I get the following error: "Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction. "
In the log file I find the following:
User MI_SERVADM, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].
I used the User Service for administrator, I have not used the individual user for administrator.
Regards, Gokhan

Ah anyway I receive the above error even when I do a search in the node "Mobile Components".
Now there's this in the LOG DefaultTrace (2 errors following)::
1) Connection is already closed and no longer associated with a managed connection
2) Exception occurred when processing Search:
[EXCEPTION]
com.sap.ip.mi.admin.core.ApplicationException: Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction.
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:730)
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerBean.getHierarchy(GroupingControllerBean.java:580)
     at com.sap.ip.mi.ejb.admin.grouping.GroupingControllerLocalLocalObjectImpl0.getHierarchy(GroupingControllerLocalLocalObjectImpl0.java:547)
     at com.sap.ip.mi.admin.services.GroupingDelegate.getHierarchy(GroupingDelegate.java:81)
     at com.sap.ip.mi.admin.ui.HierarchyGroup.buildUpList(HierarchyGroup.java:252)
     at com.sap.ip.mi.admin.ui.wdp.InternalHierarchyGroup.buildUpList(InternalHierarchyGroup.java:409)
     at com.sap.ip.mi.admin.ui.Search.triggerSearch(Search.java:222)
     at com.sap.ip.mi.admin.ui.wdp.InternalSearch.triggerSearch(InternalSearch.java:286)
     at com.sap.ip.mi.admin.ui.Search.wdDoInit(Search.java:138)
     at com.sap.ip.mi.admin.ui.wdp.InternalSearch.wdDoInit(InternalSearch.java:272)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.onComponentCreated(ViewManager.java:258)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.fireComponentCreated(ComponentUsage.java:575)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:175)
     at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141)
     at com.sap.lm.webadmin.mainframe.RenderingUtils.loadCurrentPlugin(RenderingUtils.java:189)
     at com.sap.lm.webadmin.mainframe.MainFrameView.wdDoModifyView(MainFrameView.java:272)
     at com.sap.lm.webadmin.mainframe.wdp.InternalMainFrameView.wdDoModifyView(InternalMainFrameView.java:1419)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Edited by: dpns22 on Feb 1, 2010 10:31 PM
Edited by: dpns22 on Feb 1, 2010 10:59 PM

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

HTTPS: Error RWB components monitoring

Similar Messages

Maybe you are looking for