ON RWB - CC Monitoring - SOAP Channel. status says  "inactive or unregister

Hi,
I am working on SOAP Webservices.
My Scenario is working fine ... But Some How on RWB - CC Monitoring - SOAP Channel. status says  "inactive or unregistered".
On the otherside , my SOAP Scenario is working fine...
But why for that status " "inactive or unregistered"." , I dont Know?
Please Suggest, How to Deal with this ........?
I executed transaction code " se38 - > SRT_ADMIN_CHECK report "
It states me almost every thing unregistered/ inactive/ not configured except ICM Services ..
are these services shoud active and registered for SOAP Scenario?
how to activate them .............????????
That CC status " "inactive or unregistered" has anything to do with this  SRT_ADMIN_CHECK report????
Regards
Prabhat Sharma.

Hi
This is the problem which i recently faced and solved.
Cause: Saop related  J2EE application are stoped or not set to  default start as initial state.This is also a reason
             for 503 service unavailable error while soap posting.
Solution : start the J2EE app , com.sap.aii.adapter.soap.app & com.sap.aii.adapter.soap.lib  set them as defualt started
               as initial state.
Where  : If you are in PI 7.1 ,  http:<host>:<port>/nwa->Operations Management  -> Systems -> Start & Stop -> Java EE      
               Applications.
                Refer http://wiki.sdn.sap.com/wiki/display/XI/start_stop_applications for more help.
               Also in Start button , there will be a dropdown where you can set the  default initial state as started.Simply starting may
               cause similar problem ( not registered ????????) again ,so better to set initial as started state.
Regards,
$rinivas

Similar Messages

  • SOAP - channel started but inactive

    Hi experts..
    while testing Scenario using SOAP adapter. in RWB -
    >  adpapter monitaring . here all the adapters in gery status , when i check in communicational chanel monitaring iam seeing error  "channel started but inactive "
    but i cheked all adapeters in IR ID and refreshed the cashes, and tested the proxy also evrthing is ok.
    even i run the scenarion why the adpter status is not changed from yello to green?
    i chek the notes 809420, 764176 but i didnt understand what is causing this issue?
    note : previously all the scenarios are implemeted in SP6 , now iam working on SP16 , iam wondering in my current system all the adapters in grey color even othe scenarios excuted sucessfully also.
    please suggest me ?
    thanks
    vasavi

    Hi sheshagiri
    i run the proxy iam able to see the below error in
    outbound processing----
    > payload after service
    ADDRESSVALIDATERESPONSE>
    - <RESPONSE>
    - <TRANSACTIONREFERENCE>
      <CUSTOMERCONTEXT>Local mode using Progistics XML Processor</CUSTOMERCONTEXT>
      <XPCIVERSION>6.1.9</XPCIVERSION>
      </TRANSACTIONREFERENCE>
      <RESPONSESTATUSCODE>609</RESPONSESTATUSCODE>
      <RESPONSESTATUSDESCRIPTION>Unable to process request</RESPONSESTATUSDESCRIPTION>
    - <RESPONSEERROR>
      <ERRORSEVERITY>Fatal</ERRORSEVERITY>
      <ERRORCODE>2441</ERRORCODE>
      <ERRORDESCRIPTION>Invalid Login ID. Verify Login ID with System Administrator. I7A9</ERRORDESCRIPTION>
      <MINIMUMRETRYSECONDS>N/A</MINIMUMRETRYSECONDS>
    - <ERRORLOCATION>
      <ERRORLOCATIONELEMENTNAME>LOGINID/FOLDER</ERRORLOCATIONELEMENTNAME>
      <ERRORLOCATIONELEMENTREFERENCE>n/a</ERRORLOCATIONELEMENTREFERENCE>
      <ERRORLOCATIONATTRIBUTENAME>N/A</ERRORLOCATIONATTRIBUTENAME>
      </ERRORLOCATION>
      <ERRORDIGEST>N/A</ERRORDIGEST>
      </RESPONSEERROR>
      </RESPONSE>
      </ADDRESSVALIDATERESPONSE>
    please suggest me

  • In RWB----component monitoring --adapter engine-- status

    Hi ,
    In the Runtime work bench component monitoring  if we click on adapter engine we get two tabls
    CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help
    Ping Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details
    Self-Test Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details

    Hi Sandeep,
    Besides updating the patch level to the latest and ensure the SP are in the same level, the notes I would recommend would be:
    #1285224 - Http 404 error in details display for Adapter Engine
    #804124 - HTTP communication with XI Adapter Engine fails (this one you have already mentioned)
    Hope it helps too
    Regards,
    Caio

  • One of the sender SOAP channel is inactive by itself in the CC monitoring

    HI All
    sender soap channel is showing inactive in the RWB. But when i check the status in Integration directory it is active. It got inactive by itself . can anybody help me  how i can activate it.
    regards
    sandep

    Hi Sandeep,
    There are two ways to Active or Incative communication channel,
    1)Select communication channel in Componnet monitoring and start the communication channel,it will actuvate.if you want inactive stop it.
    or
    2)Iin Integration Directory select mode as Active it will start.
    sometimes it behaves like that...
    REgards,
    Raj

  • "Channel started but inactive" in RWB Monitor for SOAP sender channel

    Dear XI specialists,
    I have configured a communication scenario involving SOAP Adapter (sender) usage, but I'm facing the issue when testing the scenario. The problem is that none of messages are coming into the SOAP Adapter (checked via TCode SXI_MONITOR in XI) when using 3rd party SOAP-clients (XML Spy, soapUI) based on WSDL-file generated and exported from XI.
    I checked the sender communication channel for SOAP Adapter - it is activated in Integration Builder's Directory. SOAP Adapter itself is also started.
    I checked Runtime Workbench monitors and in the Communication Channels Monitor of the Components Monitor received the warning saying "Channel started but inactive" for my configured channel as well as for other channels working on SOAP Adapter.
    Activities which were performed (in the order in which they were performed and results tested):
    1. the configuration channel restart;
    2. the communication channel re-activation and further re-start;
    3. SOAP Adapter restart;
    4. XI system's Java instance restart.
    All mentioned activities didn't give any positive effect in part of this issue resolution.
    On the other hand, if I use test message functionality of the Runtime Workbench (Component Monitor), then messages are seen in SXI_MONITOR and expected response messages are also returned to XI from integrated business system.
    Would you please advise what can be checked else here and where the root of the problem may be detected?
    All your answers and feedback will be greatly appreciated and awarded accordingly.
    Many thanks in advance and my regards,
    Vadim

    Dear all,
    Thank you for your input! Unfortunately, the problem still exists after testings and checkings which you suggested.
    TO Seshagiri:
    I checked message monitor and found only several messages for the required sender/receiver services pair in the used namespace - all of them were successfully processed (these are messages which I sent by means of RWB Component Monitor's test message functionality).
    TO Sarvesh:
    Yes, sender agreement is configured properly. I configured it when configuring communication scenario in the Configuration Wizard and then manually re-checked its definition. Moreover, when performing Test Configuration in ID, I received positive results.
    TO Nallam Guna:
    I cleared Data Cache in Integration Builder, but this didn't help.
    TO Gujjeti:
    I'm on SAP NetWeaver 2004s PI 7.0. Service Pack level for PI is 13.
    TO Durga:
    Thank you for provided links! I have already had a look at them - but proposed solutions doesn't seem to be working in my situation.
    Thank you all once again for your prompt answers! I really appreciate your attempts in helping me!
    I would appreciate if you could share any further ideas on this issue.
    My best regards,
    Vadim

  • SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

    Hi,
    following scenario:
    ERP is sending IDocs to PI.
    Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
    In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
    But:
    I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
    In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
    Successful column is empty.
    Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
    Thanks in advance,
    André

    Hi Ravi,
    thanks.
    But there are thousands of successful messages delivered to the receiver.
    These successful messages can only be seen in the Channel Monitoring.
    I can´t find these successful messages in Message Monitoring.
    Only some with status "Error" are displayed.
    Strange...
    Cheers,
    André

  • SOAP Sender - RWB "Channel started but inactive"

    I have a sender soap channel configured. In Integration Directory the Adapter Status is active. However when I go to Runtime Workbench and view the channel it says the "Channel is started but inactive". Can someone explain to me why it is not active in Runtime Workbench?
    Also, SOAP messages sent to this channel are failing obviously because the channel is inactive. How can I make this channel active so that XI can receive SOAP requests.

    hi rodel,
    You have to process one message at least to make SOAP adapter Active
    refer this discussion
    how can i enable SOAP Adapter?
    regards
    Ramesh P

  • SOAP Adapter status stay "Channel started but inactive"

    Hi, Folks:
    We have a couple of SOAP adapters that I have not used for a while, so I put them in inactive status.
    Now we need to switch SOAP Scenario, I activate them, however, in Communication Monitoring Page, The status is Yellow Triangle: "Channel started but inactive"
    I have tried to inactivate and reactivate them for a couple of times, it does not help.
    Any ideas are welcomed !
    Liang

    Hi Guys
    As suggested by you guys, after I sent first message, all the SOAP adapter get active now. I believe I fogort how I setup it up initially. That is the value stay with your guy
    Thanks everyone !
    Liang
    Edited by: Liang Ji on Feb 29, 2008 8:48 PM

  • SOAP channels in rwb showing error "No Adapters registered for this channel

    SOAP channels in rwb is showing error "No Adapters registered for this channel",
    what is the problem?
    i tried to locate and restart the SOAP adapter from Visual admin, but couldnt find it in visual admin, pls help in locating it in visual admin

    Hi,
    In Visual Admin, Cluster tab --> Server -> Services -> Deploy --> Radiobutton Application
    --> sap.com/com.sap.aii.af.soapadapter --> Press start / stop
    This way youmay restart the SOAP adapter.
    Also Please check if there is any cahce problem, Try to refresh it. & SAP Note- 856597
    Thanks
    Swarup

  • SOAP Receiver Channel 2 nodes inactive in Production system

    Hi All,
    We are facing an issue with the SOAP receiver channels in production system. There are 4 nodes which can be seen in the communication channel monitoring and out of which 2 have the status as inactive and the short log says "inactive or never used".
    But the same nodes are active on the sender SOAP channel and all other channels.We have also checked the Status of the SOAP service that is also set to active.
    Now when the server (App server5 in our case) is switched off, which has the 2 active nodes, the messages are not processed since the nodes on the other server are inactive.
    Request you to please help us out in finding out why the nodes are in inactive status only for SOAP receiver channels. Do we need to change any settings at the adapter engine level.
    Thank you.
    Regards,
    Sarvesh Desai
    Edited by: Sarvesh  Nispat Desai on Aug 25, 2010 5:25 PM

    There is an error in reporting the status of SOAP channels. This error has already been fixed by SAP and is available as a fix in higher releases (PI 7.10 and above, latest SPs) .
    The status "inactive or never used" is shown in channel monitoring at the following two times:
    1. After creating a new SOAP channel (sender/receiver) till this channel processes any new message.
    2. After the PI system is restarted, all the SOAP channels show this status, though they are ready to handle any incoming/outgoing messages. The channels continue to display this status till they process any new message.
    In both these situations, the SOAP Channel can handle/process messages successfully. So, kindly ignore this channel status ("inactive or never used") reporting error in channel monitoring. This will not at all hamper the normal functioning of the SOAP channels.
    Hope this answers your query.

  • SOAP adapter - Channel started but inactive (case inside)

    Good day everyone!
      I have integration scenario IDOC->XI->SOAP. I did all setting and created SOAP adapter with 2 parametrs: "Target URL" and "SOAP Action".
      But when I look at Channel Monitoring I see my SOAP-channel with status "Channel started but inactive" ??
    What could it be?
    Thanks in advance!

    hi,
    this issue is too common. i face it i some of my channels. there no error.
    test your scenario. im sure it will work but the adapter still has been in yellow at least it fails and turn red.
    I have some CC in red status and working fine. later few minutes it turn  green.
    don worry about it. if you leave it working it will turn green later. if u restart the java stack you can solve it but i dont recommend it because this error could appear in other adaprter too.
    commonly it appear when you start and stop the channel from RWB.
    Hope Helps
    thanks
    Rodrigo.

  • CC problem in RWB Component monitoring

    Hi people
    i am getting this error  in RWB component monitoring
    1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
    But sender&receiver CC are STATE is ACTIVE status
    Adapter Engine Server is RED mark
    All object's r correct
    PLS send me to ASAP
    Thanks & Regards
    shekar

    Hi There,
                               It saying that one of you CC in error and remaing things are ok.
    As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
    the error may be occured some time back but it is still showing erro ..but everything works fine...
    Regards
    Rao

  • Adapter monitoring: SOAP is grey although it is used?

    Hello everybody,
    5 minutes ago I checked our SOAP receiver communication channel and send a message. But in adapter monitoring the SOAP adapter is shown in grey instead expected in green.
    So how can I see, if the SOAP adapter works correctly?
    Thanks a lot, regards Mario

    Hi Mario,
    SOAP channel will show either Green or Red only when atleast one message has been processed thru the SOAP channel,
    First, for this message, check the SXMB_MONI status? Is it showing Black Flag ??
    Else try to activate the adapter once again, just refresh the cache and the send the message once again..
    Also have a look into this thread-
    how can i enable SOAP Adapter?
    Regards,
    Moorthy

  • SOAP Adapter: Channel started but inactive

    Our system is XI 3.0 running on Solaris 10 zoning and Oracle 9i. All on Support Package 17.
    When consulting the status of the adapter in the RWB environment we are receiving the message above "Channel started but inactive".
    How can We solve this problem?

    hi,
    SOAP adater will be green when you process the first message via this adapter
    Regards,
    michal

  • RWB  issue Channel started but inactive

    Hi,
    In RWB  the SOAP adapter is showing status message as"Channel started but inactive" but all the SOAP adapters are active in Directory.
    This is happening only in new environment Pre-Production.
    Valueable inputs will be appreciated.
    Thanks
    Santosh

    Hi Santosh,
    SOAP adapter shows "Channel started but inactive" message when there are no messages processed till now(after activating any changes to comm channel or server is restarted).  Once a message is triggered in SOAP adapter, this will go away.  Try to trigger a message and see.
    Regards,
    Sreenivas

Maybe you are looking for