Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

Similar Messages

Space problems in component monitoring runtime workbench SAP PI

Hi
If I want do save or delete a new test message in the component monitoring of the runtime workbench in SAP PI but I get the following error:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error in executing the compilation process: [Cannot error=12, Not enough space].
How can I solve this?
It looks like that the problem only occurs in the component monitoring but I'm not confident with that. The amount of test messages is not that large so I guess there will be more serious problems with the space in the java stack.
Can anyone help
Kind regards
Maarten van IJzendoorn

Hello Maarten
Check the note #1404134 Compilation fails with memory issue in Web service component. This contains a solution to a very similar error to that you are reporting. Does this match your issue?
Regards
Mark

Trex Index error in Component Monitor

Hi Experts,
I have created an index for indexing one of the KM folder . When I check the queue status from TREX monitor screen, it shows Document Status as "Preparation
Failed"
Return Message : 8005
Return Message : Timeout reached
Return Message : 8006
Return Message : Lost Connection to peer
I have also checked Component Monitor in that Repository Managers and Services shows runing status but there is errror symbol with yellow trangle.
Can someone please help me out

Yes Sir,
There are errors in component monitor and i have expanaded the node ands checked the errors that are as follows,
Component Monitor --> Services --> scheduler --> attachmentscheduler startup failed :
Configuration Error: No CM system assigned to this task
Component Monitor --> Services > reporting> Startup Error: exception in startup: Invalid RID: No repository manager found for prefix: /reporting
Component Monitor --> Repository Managers > reporting> startup failed
Component Monitor --> Repository Managers >taxonomy> Startup Error: taxonomy manager: start failed
We had assigned one server node to Scheduler Tasks.
Still there is same error.

Error in component monitoring

hi experts,
i'm working on file2jdbc secnario,in component monitoring it occured an error like.............
"Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure) Even in the datatype i mentioned action as attribute.i need some solution to overcome this.
helpful answer will be rewarded.
regards,
Kiran.

Kiran,
Go through this links,
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar

Business Process Engine error in component monitoring

Hello,
i installed a new version of XI.
when i check the component monitor whit browser i see that Business Process Engine element have RED led.
If i look the details, then i have the follow element whit yellow status:
Maintain Prefix Numbers
Configure RFC Destination
Schedule Background Job for Missed Deadline
Schedule Background Job for Work Items with Errors
Schedule Background Job for Event Queue
Schedule background job for clearing repor
something during configuration?
thanks for suggestions

Hi,
first thing you should try is:
1. Start transaction SWU3.
2. Use the button u201CAutomatic workflow customizingu201D
it's explained [here|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10bcbd65-64ea-2a10-9a8d-b653b8e0843c] .
Regards
Patrick

Regarding Communication Channel Error in Component Monitoring(RWB) in Dev

Hi,
In my XI dev Server when I check Component monitoring....Adapter Engine and CC monitoring are showing errors ( showing red
symbol)......
I think my RFC to File Scenario cannot be executed due to this.......I cant receive any messages in SXMB_MONI.....
Please help me......
Thanks,
Sudheer

Hi...
Still I am not getting any messages in the MONI.....
In communication Channel Monitoring it is showing green.......
In Component Monitoring Integration Engine:XID showing red.....CCMS Status: showing red and Adapter Engine Showing red......
Created RFC destination at ECC(of 'T' type) and gave ECC details....Then gave same details in Communication channel in XI.......
I did not created RFC Destination at XI.......
Should data to be passed to RFC or XI automatically pings the data......
When ABAPer executed RFC Connection its successful...but when he executes Functional module i.e test it is showing 'SYSTEM_FAILURE'.....
Thanks,
Sudheer

File System repository error in component monitor

Hi,
I created a file system repository in our portal server which will connect to windows file system and display the folder structure.
I created a File system repository manager with the following properties mentioned below
Prefix (must start with /): /FMICDelaers
Lookup mode: caseless
Root Directory:
fendercorp\FMICDelaers
Repository Services:
Property Search Manager:
Security Manager: W2kSecurityManager
ACL Manager Cache:ca_rsrc_acl
Windows Landscape System: B2B_Windows
I have given full acees to everyone for FMICDealers folder on fendercorp server.
We have created a networkpath called B2B_windows as mentioned below
jCIFS Protocol: yes
Description:
Network Path:
fendercorp\FMICDelaers
Password:xxxxx
User: insidefender\ssayneni
When i am checking the repository in component monitor i am getting the below error
Startup Error: The localroot does not exist: /usr/sap/EPD/JC61/j2ee/cluster/server0/
fendercorp\FMICDealers
Thanks
Sushanth

Hi
A general recommendation would be to use small letters in all ID's regardring network drives, repositories etc. See https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/002fb447-d670-2910-67a5-bfbbf0bb287d for advice on how to optimize performance of KM.
Other than that, you could check the documentation mentioned here:
https://www.sdn.sap.com/irj/sdn/message?messageID=6398301#6398301
It seems as the root directory in your File System Repository Manager is not defined correctly. It should be forward slash instead of backslash.
Go through the settings again and see if the startup error changes or disappears. The startup error indecated that it is a configuration error.
Best regards,
Martin Søgaard

Error on Component Monitoring On RWB after changing SLD .

Hi,
Guys If my below given questions are not clear to You ... >>>>>>>>>>>>Do ask me for Clearity
My PI 7.0 System was on Local SLD earlier, at that time My Scenarios/ RWB Components were Working Fine.
Now, On Place of Local SLD, We are onto Centerlise SLD on SOLUTION Manager.
after few Changes now my ESR and ID are getting product and Buisness System from Solution manager's SLD.
but ................. >>>>>>>>>>>
>
>>
>>>>
>>>>
On RWB - Component Monitoring - Each Component is coming into Red/Error mark.
So ..
Question : Is RWB is also effected from SLD Changes ???????
r
Facts Found during troubleshooting : -
>
1. In Solution Manager's SLD - Technical System - Exchange Infrastructure - Only one Technical System is Coming for Integration Server.
while
IN Old Local SLD - Technical System - Exchange Infrastructure - 6 different tecnical system was coming ( Integration Server/ RWB / Integration Engine / Adapter Engine ...etc)
Can this be the reason ????????
Please Suggest, What is Missing ?
for Sld Change following steps are performed .. .. . .
1. PI 7.0 like User Creation in Solution manager.
2. Changes in SLDAPICUST in PI System.
3. Changes Done in Excange Profile for SLDNAME.
4. Changes Done in Virtual Manager for SLDNAME.
5. RZ70 on new SLD.
Regards

Hi ,
Solution : After changing Local SLD to Domestic SLD , Error was Coming in RWB - Components ...
Solved by :
These are Documents Used for doing Changes in SLD When found Error on RWB.
764176 - Error in XI due to inconsistent SLD contents.
1031321 - Self-Registration of Adapter Engine and RWB fails
Problem has been solved.

Error while posting from runtime workbench

Hi all,
My scenario is idoc-idoc(One SAP system is sending data to another SAP system through XI as an idoc).
I am trying to test the scenario by posting the idoc data in RWB -> Integration Engine but its showing me an error:500 Error during Sender Agreement Determination. Hence I have tried it by removing the sender agreement in the configuration. Still i am facing the same problem.
Can anyone suggest what could be the reason for this error?
Note:Service pack:17
Java version:1.6.0_07

Hi,
Check whether you have created the RFC Destination of Type 3 from R/3 Sender system to PI and same from PI System to Receiver R/3. Along with this check the following For both systems(Sender/Receiver)
- Logical System
- Port
-Partner Profile
There is no need to configure Sender Agreement and Sender Communication channel since its IDOC.
Regards,
Prasanna

Error got in Communication channel monitoring ( component monitoring)

Hi Experts,
When i executed the RFC from R3, i got the below error in runtime work bench.
please help me out if any one knows, i already gone through some of sdn line, but i am not able to get exact solution.
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=qa2.syec.sshe.ed SYSNR=13 GWHOST=qa2.syec.sshe.ed GWSERV=sapgw13 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Thu Mar 20 15:44:08 2008
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic_mt.c
LINE 10713
COUNTER 1
1) Registered Server Program has been created in RFC destination in R3, and RFC destination has been tested successfully, in R3 System we have 9 clients, but i have created one client independent RFC detonation type TCP/IP. is it right way to create client independent single RFC destination for multiple clients?? ( 3 unit test clients, 3 development clients, 3 configure clients), but in SLD only 3 business are created ( which are for 3 unit test clients), i have imported business system for client 300 and i have created communication channel under this business system, but when i run the RFC in this client i am gettin above error in component monitoring.
2) I have created incremented 100 to 300: Set the following environment variable CPIC_MAX_CONV=300
3) In sender RFC communication channel i have all correct parameters like: gateway service,Program ID, client number, password, userid etc
Pleas help me out.
thanks
siva grandhi

Hi,
This solved this issue for me:
Setting Maximum Database Connections
Perform this step only if you want to check or change the values.
       1.      Open the Visual Administrator tool.
○       j2ee admingo.bat if you also use SAP WAS ABAP.
       2.      Log on as an administrator.
       3.      Choose Server ® Services ® JDBC Connector.
       4.      Choose the Properties tab strip and select sysDS.maximumConnections.
Regards,
Hugo Mendoza

Communication channel doesn't show in runtime workbench

Hi,
In Integration monitoring Runtime Workbench does not show communication channel list in communication channel monitoring. It shows empty but we have created lot of communication channels. This is problem in XI adapter or any other problem? Please can anyone tell the solution for that.
Regards
Vijay

Hi,
If ur searching for Xi and Receiver IDOC adapter in RWB.U cant find them in RWB then run in IS.try to check ur sender adapter and u can find the complete flow of it.
Thanks and Regards,
Phani Kumar

Error in Runtime WorkBench/Component Monitoring

Hi all,
1. I have configured an AS ABAP system to connect to the SLD successfully. In the Technical System List of SLD, it's named "TE1 on sap0810". (Successful)
2. After, i have created a Business System corresponding for this Technical System "TE1 on sap0810" with Client 810. In the Business System List of SLD, it's named "BUSINESS_SYSTEM_TE1CLNT810". (Successful)
3. And after, i log on into Runtime WorkBench and choose "Component Monitoring" Tab and choose Display all component, i get an error about the Business System "BUSINESS_SYSTEM_TE1CLNT810" for "Ping Status" and "Self-Test Status" as message below: (Error)
Ping Status: Unable to log on to system BUSINESS_SYSTEM_TE1CLNT810 in language en with user PIRWBUSER Last Retry Jul 28, 2008 5:48:56 PM ICT ... Details
Self-Test Status: Unable to log on to system BUSINESS_SYSTEM_TE1CLNT810 in language en with user PIRWBUSER Last Retry Jul 28, 2008 5:48:56 PM ICT ... Details
Anyone can please help me to resolve this problem?
Thanks a lot in advance,
<removed by moderator>
Vinh Vo
Edited by: Mike Pokraka on Jul 28, 2008 5:07 PM

hi friend
If you have created the TS & BS correctly in SLD
check the following points:
1)The JCO service might have been down...check it out....Sometimes it happens due to overloading of server...try to restart the server.....after clearing queue and cache restarting the server
2)check the RFC destinations AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER.
regards
kummari

Error in Runtime Workbench, Component Monitoring, Proxy Runtime

Hi,
I have the following error in the Runtime Workbench, under Component Monitoring->Integration Engines->Proxy Runtime. The error message is Ping Status: Unable to logon to system xxx in language EN with user XIRWBUSER. However, I am unable to find out where the account and password are specified in order to correct this. Any help would be appreciated.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

Runtime Workbench Component Monitoring ALL Display: error on page

Dear all,
when go in to Runtime Workbench >Component Monitoring > select ALL and press display ==> nothing coming and showing warning message at status bar that error on page.
what to do?
Best regards.
dushyant,

Hello,
Reinstall you internet explorer and use IE 6.0 and you can work on Mozilla Firefox also
Regards,
Ramesh P

Error while opening Adapter Monitoring in Runtime Workbench

Hi,
I am unable to open Adapter Monitoring from
Runtime Workbench -> Component Monitoring -> Adapter Monitoring
When I tried to open, I am getting following message in the new window:
"The page cannot be displayed"
Please let me know where I can enable this option.
Thanks,
Yogi.

Hi,
Go thru this SAP Note- 768456,928862
Also this doc may help u-https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e1ba1a-e86e-2910-ee83-b73b54abc7d4
Regards,
Moorthy

Error in Component Monitoring(Runtime Workbench)

Similar Messages

Maybe you are looking for