Https URL entry in AAM SharePoint

Hi, I need to publish one SharePoint site over Internet with https URL.
Currently I am using default URL to access internally, so I am creating new URL for Internet under Internet Zone in AAM with "https://desiredURL" .
So my question is can I entry https URL in AAM in Central Admin?
Or else there are other options to publish https URL for SharePoint site.
guide me.

You need to extend your web application and enable SSL for the extended web site. After these changes, update the changes in AAM. Refer to the following post for more information
https://nhutcmos.wordpress.com/2013/07/26/configure-ssl-certificate-for-sharepoint-external-https-access/
https://store.bamboosolutions.com/kb/article.aspx?id=12666
Cheers,

Similar Messages

In Sharepoint browser enabled Infopath form Date & Date Time Pickers throws Script errors using https url.

HI All,
I am working in Sharepoint 2010 browser enabled Infopath form and is have two Infopath date picker controls. The form is working fine in normal "http://" url. while the same site we are using opening with "https://" and select the date
from picker then we got the script errors.
There are no scripts used in this site. It is by default sharepoint 2010 publishing site.
One more i checked with "Date Time picker" Infopath control also but same issue.
Below are the errors for reference:-
Any help is appreciated..!
Thanks.

Thanks Linda, for your quick response.
The Minimal
Download strategy feature is not available
in SharePoint 2010 and start.js file is also not available.
can you please suggest the exact location of "start.js"
file in SharePoint 2010 then i go further or please suggest other way to find or debug the process.

Follow feature shows server name URL instead of AAM URL

hi -
My sharepoint site http://servername has an AAM set to ooint to http://sitename
The site works fine. However when I follow any sites it places them in my Followed Sites as http://servername instead of http://sitename.
Any ideas? thanks

Hi,
According to your description, my understanding is that you want to use FOLLOW feature with the URL of the AAM zone rather than the URL of the default zone.
It is by default that the FOLLOW feature comes up with default zone URL instead of the other zone URL.
For this issue, I suggest you change the AAM setting, and provide the URL which you want to be displayed in Followed sites with the default zone for the web application. Reset IIS.
Here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/6757d6ba-a184-4ef6-811f-e88954334655/follow-feature-url-for-extended-web-application?forum=sharepointgeneral
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

How to do Handshake with tired party(bank) HTTPS URL from SAP PI server

Dear Expert,
I have developed bunch of scenarios, all are synchronous ABAP proxy to HTTP_AAE with bank on PI 7.4(dual stack). Bank web server is HTTPS enabled server. Our ABAP developments are still in progress also we have few issue in connection from ECC to PI.but that is not the focus of discussion here.
we want to do the handshake to check the connectivity with bank on their HTTPS URL from PI. Bank has provided the privet key for SSL from their server and corresponding public key they have maintained on their server. I have imported the private key under NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12->select the SSL.p12 file->import , also I have selected the option to "Use SSL" in HTTP_AAE receiver communication channel and selected the corresponding entryin "keystore view" and "keystore entry". All these I have done in our DEV system, and we are trying to connect our PI dev to bank Dev server.
Questions
Is there any specific steps to do the handshake with third party HTTPS(bank in my case) server? if not, how can we just test the HTTPS connectivity by using the SSL private installed on our PI server, without running the complete scenarios. Our PI has been installed on UNIX, and "telnet https url 443" is working, as network team has opened the HTTPS port.
We have not enabled the SSL technically on our PI server, and we have not installed any generated certificate from our PI server. Moreover, we have not made our PI url as "https:hostname:port" as we just need to communicate with bank by using their private key. Do you guys think we should enable the SSL? if yes, please explain why.
What is the best practice to test the connection with third party having HTTPS URL? how can I just assure HTTPS communication is working fine, before testing my actual scenarios.
Thanks for helping always.
Regards,
Farhan

Hi Farhan,
Some part of the blog is applicable for sending HTTPS request to partners/third party (Receiver SOAP Adapter).
If banks certificates are already in trustedCA, then, can you check if it also imported under user PIISuser under Identity management in NWA. If above 2 steps are done then i think your are good to go. But be careful when you install certificate, it should be in proper order.
As you already mentioned, connectivity is already established and you are able to PIng/telnet from pi server, connectivity looks ok.
While sending request, if you are getting 401 unauthorized, below might be the reason -
1. Certificate not installed correctly or some missing steps
2. Partner or TP is not ready to receive it, some certificate issue in there side.
other than 401 means you are ok (As per certificate and Connectivity) - 403 and 500 errors are next stops.
403 - error because of encoding method.
500 - data issue.
Regards
Aashish Sinha

Problems with SAP BC to post a request to https URL

Hello,
in a integration scenario one of our partners wants to send a xml to our server via https. 
I tried this internal with a test business connector. I simple use the WmPublic.pub.client http service. 
I try to post a record to an https:// URL and get an error. It seems that there is some trouble with the ssl handshake. However it is working in the browser. 
The option Security -> Certificates -> Trusted Certificates -> CA Certificates Directory is 'unspecified'. Therefore no server certificate should be reject. 
 
Now I got an 'iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure 
' error. I do not find any helpful entries in this forum. Did anyone solve this issue? 
 
Thank you, 
Nils 
 
error: 
2009-08-03 10:08:13 CEST iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure 
 at iaik.security.ssl.r.f(Unknown Source) 
 at iaik.security.ssl.x.b(Unknown Source) 
 at iaik.security.ssl.x.a(Unknown Source) 
 at iaik.security.ssl.r.d(Unknown Source) 
 at iaik.security.ssl.SSLTransport.startHandshake(Unknown Source) 
 at iaik.security.ssl.SSLTransport.getInputStream(Unknown Source) 
 at iaik.security.ssl.SSLSocket.getInputStream(Unknown Source) 
 at com.wm.net.NetURLConnection.trySSLConnect(NetURLConnection.java:691) 
 at com.wm.net.NetURLConnection.httpsConnect(NetURLConnection.java:562) 
 at com.wm.net.NetURLConnection.connect(NetURLConnection.java:171) 
 at com.wm.net.HttpURLConnection.getOutputStream(HttpURLConnection.java:419) 
 at com.wm.net.HttpContext.getOutputStream(HttpContext.java:578) 
 at com.wm.net.HttpContext.getOutputStream(HttpContext.java:554) 
 at com.wm.net.HttpContext.post(HttpContext.java:338) 
 at pub.client.http(client.java:512) 
 
SAP BC Info: 
Software 
Product webMethods Integration Server 
Version 4.6 (Standard Encryption) Release Notes 
Updates BC46_CoreFix7 
Build Number 940 + CoreFix 7 [Fixes 1-205 + SP1-3] 
SSL Standard (40-bit), Provider: IAIK 2.6 
 
Server Environment 
Java Version 1.3.1_20 (47.0) 
Java Vendor Sun Microsystems Inc. 
Java Home /usr/jdk1.3.1_20/jre 
Java VM Version 1.3.1_20-b03 
Java VM Info Java HotSpot(TM) Client VM (mixed mode) 
Classpath /usr/local/sapbc46/server/updates/BC46_CoreFix7.jar 
/usr/local/sapbc46/server/lib/server.jar 
/usr/java/lib/i18n.jar 
/usr/java/jre/lib/rt.jar 
/usr/java/lib/i18n.jar 
/usr/java/jre/lib/rt.jar 
/usr/java/lib/i18n.jar 
/usr/java/jre/lib/rt.jar 
/usr/java/lib/i18n.jar 
/usr/java/jre/lib/rt.jar 
/usr/java/lib/i18n.jar 
/usr/java/jre/lib/rt.jar 
/usr/java/lib/i18n.jar 
/usr/java/jre/lib/rt.jar 
/usr/local/sapbc46/server/lib/classes 
/usr/local/sapbc46/server/lib/client.jar 
/usr/local/sapbc46/server/lib/mail.jar 
/usr/local/sapbc46/server/lib/server.jar 
packages/SAP/code/classes 
packages/SAP/code/jars/static/inqmyxml.jar 
packages/SAP/code/jars/static/jARM.jar 
packages/SAP/code/jars/static/jCO.jar 
packages/SAP/code/jars/static/sapjco.jar 
packages/SAP/code/jars/static/sapxmltoolkit.jar 
packages/WmPartners/code/classes 
packages/WmWin32/code/classes 
OS Linux 
OS Platform i386 
OS Version 2.6.18.8-0.13-default 
Current User sapbc 
Working Dir /usr/local/sapbc46/server 

Ok - in this case you need to include to session based SSL setup in your flow (scenario).
The pub.security:setKeyAndChain and pub.security:clearKeyAndChain services are used to control which client certificate
the SAP BC server presents to remote servers. You need to use these services to switch between certificates and
certificate chains if you are not using aliases for remote servers.
List of services to be used:
pub.security:clearKeyAndChain
-- Associates the default key and certificate chain with the subsequent set of invoked services.
pub.security:setKeyAndChain
-- Processes a digital signature to make sure that the provided data has not been modified. The signature input is the DER encoding of the PKCS#7 SignedData object.
pub.security.pkcs7:sign
-- Creates a PKCS7 SignedData object.
pub.security.pkcs7:verify
-- Processes a digital signature to make sure that the provided data has not been modified.
pub.security.util:createMessageDigest
-- Generates a message digest for a given message.
pub.security.util:getCertificateInfo
-- Retrieves information (e.g., serial number, issuer, expiration date) from a digital certificate.
pub.security.util:loadPKCS7CertChain
-- Converts a certificate chain that is in PKCS7 format to a list (a one-dimensional array) of byte arrays.
Example:
Invoke pub.client:http to send data to Company D.
Invoke pub.security:setKeyAndChain using the key and certificate chain for Company B.
Invoke pub.client:http to send data to Company B.
Invoke pub.security:setKeyAndChain using the key and certificate chain for Company C.
Invoke pub.client:http to send data to Company C.
Invoke pub.security:clearKeyAndChain to revert back to the default key and certificate chain for Company
Au2019s server.
Invoke pub.client:http to send data to Company D.
Edited by: Kai Lerch-Baier on Aug 3, 2009 1:47 PM

How to download video files using http urls through OSB

Hi all,
I am working on a requirement where I need to download the video using http url of that video through OSB. Is it possible to convert the video files hosted in a server into base64 code using OSB ? Kindly help me on this.
Thanks
Edited by: 887737 on Jul 25, 2012 3:26 AM

Hi,
I believe you can get the video file using file transport and then convert it into base64 using a java call out...
This may help...
https://blogs.oracle.com/ateamsoab2b/entry/an_example_of_how_to
Cheers,
Vlad

How to submit a multiple-selection list box in an Infopath Sharepoint form as multiple entries on a Sharepoint list?

I would like to be able to submit an Infopath form with a multiple selection list box in Sharepoint as multiple entries on a Sharepoint list.
For example, a user has to complete the following fields:
First Name:
Last Name:
Favorite Color (can select more than one):
[] Blue
[] Red
[] Yellow
[] Green
If the user picks blue AND red and submits the form, the Sharepoint list would feature TWO entries, both with their first and last names, but with different colors in the "Favorite Color" column.
Please let me know if there is a way to do this. Any guidance would be helpful!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S:Solaris SPARC 64 bits
I.E Browser: 9.0
Problem Description
Cloned target database TEST1 from source database TEST2 RMAN full backup. But on accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"?
Autoconfig completes successfully on both DB and Apps Tier and have also ran ojspcompile but still the same issue.
$ perl ojspCompile.pl --compile --flush -p 2
logfile set: /t000/test1/inst/apps/TEST1_Hostname/logs/appl/rgf/ojsp/ojsp
starting...(compiling all)
using 10i internal ojsp ver: 10
synchronizing dependency file:
loading deplist...8095
enumerating jsps...8095
updating dependency...0
initializing compilation:
eliminating children...6024 (-2071)
translating and compiling:
translating jsps...6024/6024 in 7m50s
compiling jsps...6024/6024 in 35m17s
Finished!
Bounced the services there after still the same issue. Could anyone please share the fix if encountered such an issue before.
Thanks for your time,
user10088255

Apache logs have the below entry:
[Sun Oct 27 02:30:11 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 02:30:11 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 03:03:02 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 03:03:02 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:04:59 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:04:59 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:29:54 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:29:54 2013] [notice] Accept mutex: fcntl (Default: fcntl)

Problem while creating partner link using https URL

Hi,
To create the partnerlink using https URL, I had done the following:
-Imported the self signed certificate into the OraBPELPM_\jdk\jre\lib\security\cacert
-Added following entries in OraBPELPM_1\integration\jdev\jdev\bin\jdev.conf
AddVMOption -Djavax.net.ssl.keyStore=E:\OraBPELPM_1\jdk\jre\lib\security\cacert
AddVMOption -Djavax.net.ssl.keyStorePassword=esbtest123
I am not able to create partner link using URL https://localhost/orabpel/default/ErrorHandlerBPEL/1.0/ErrorHandlerBPEL?wsdl .
Able to create partnerlink using same URL if I replace https with http.
Did I miss any other configuration that needs to done to create partnerlink using https in JDeveloper BPEL Designer.
Thanks,
-Vidya

Hi,
I too have the same issue. Appriciate if you share some knowledge on this issue.
Thanks
Aravinda

Http URL.openConnection() - URLConnection, not HttpURLConnection

Is there any way of calling openConnection on an http URL object, and not getting a HttpURLConnection?
HttpURLConnection extends the URLConnection class in frequently-useful ways, for example by defaulting the Accept and Content-Type headers on requests (plus the frequently baffling getOutputStream/getErrorStream behaviour). However in some contexts, these extensions are profoundly unhelpful.
In particular, if I'm writing test code, I want to be able to make HTTP requests with missing Content-Type or Accept headers -- that is, without the default values which HttpURLConnection adds -- and there appears to be no way to do that, short of writing my own HTTP protocol handler.
Failing that, is there any way of deleting request headers from a HttpURLConnection? The obvious connect.setRequestProperty("header", null) doesn't do it (and isn't documented to).
Best wishes,
Norman

Thanks for that. The apache.commons.net classes look useful, but I think they end up being a little too low-level. The URLConnection class does usefully abstract the boring details of the HTTP transaction -- the only problem is that HttpURLConnection tries a little too hard.
I think my question really boils down to the following: is there a way of switching off the extra functionality/defaults in HttpURLConnection? (if so, it's insufficiently clearly documented).
I remember submitting an RFE to this effect a while ago, but can't find the entry in the bugs database (I apparently can't search for 'submitter').

Hitting a HTTPS url from SAP PI

Dear All,
Please let me know how to hit a HTTPS url using plain HTTP adapter in SAP PI. I was just provided with a url and user credentials.
Regards
Koti Reddy

Hi Koti,
Please perform the HTTPS settings mentioned in the below link before you start the using.
http://scn.sap.com/docs/DOC-26145
Regards,
Naveen

Safari 5.0.5 (6533.21.1) - Lost ability to browse "https" urls, "http" fine

Bizarre occurrence in Safari for me that I was hoping someone may have come across before:
Tonight for some reason it will not accept any https url whatsoever - it produces the following error:
can't open the page <https://url> The error is: “The operation couldn't be completed. Operation not permitted” (NSPOSIXErrorDomain:1) Please choose Safari > Report Bugs to Apple, note the error number, and describe what you did before you saw this message
I've not installed anything recently or made any config changes. All I do is stay up-to-date with the software updates from Apple.
I've tried moving the app to the Trash, rebooting and then re-installing but with no luck
I tried restoring a previous version of Safari (5.0.4) from early April Time Machine version but still had the same problem. Wondering if there are files outwith the Safari App that may be the cause and not the app itself.
I have checked that my firewall and content filtering allow access - (this is the unchanged config I mention above) - and they do and am accessing this discussion site (ironically https so Safari couldn't get to it after my initial Google search) from Firefox.
I've nothing against Firefox as a browser but I was happy enough with Safari and would like to keep using it.
In trawling the web I couldn't see anything that directly matched what I was experiencing.
If anyone has any hints or tips that might help I'd be really grateful.
Thanks
Steve

Mac OS X (10.5.2) <--- your profile.
Which Mac OS X are you running?
If you haven't tried, reinstall Safari.
http://support.apple.com/kb/DL1070
Then repair disk permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac. If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

Accessing BSP File Download using HTTPS URL

Hi,
I'm struggling with a problem of downloading a file from a https url. I wrote a BSP App for downloading a file from a unix server.. It works fine when I use a http URL with port 8080 and does not work when I use https.!!
Example:
https://comms.gmsanet.co.za/supplier [ download does not work ]
http://comms.gmsanet.co.za:8080/supplier [ download works ]
When I try to download using https.. it does not pull the file name and path
see code below and suggest me if anything to be chnaged.
In the Form Initialization method:
event handler fr data retrieval
DATA: i_file type string,
 s_fields TYPE tihttpnvp,
 s_fields_line TYPE ihttpnvp,
 multipart_form type ref to if_http_entity,
 file_upload type xstring,
 lv_backend type string,
 success type string,
 entity type ref to if_http_entity,
 file type xstring,
 content_type type string,
 content_filename type string,
 content_length type string,
 content_disposition type string,
 num_multiparts type i,
 i type i value 1,
 doEcho type string value 'X',
 value type string,
 filename type ZFILETAB-fileinfo,
 ext1 type string,
 ext2 type string,
 dsn type string,
 bptype like sy-uname,
 itab TYPE ZFILETAB,
 itab_line TYPE ZFILETABLINE,
 file_ext type ZFILETABLINE,
 fileinfo type c,
 zcount type i.
 filename = '/NewMessge.doc'.
 content_filename = filename.
Check the extension and assign the content type
 split filename at '.' into ext1 ext2.
 case ext2.
 when 'zip'.
 content_type = 'application/x-zip-compressed'.
 when 'doc'.
 content_type = 'application/msword'.
 when 'txt'.
 content_type = 'text/plain'.
 when 'ppt' or 'pps'.
 content_type = 'application/vnd.ms-powerpoint'.
 when 'xls' or 'exe'.
 content_type = 'application/octet-stream'.
 when 'gif'.
 content_type = 'image/gif'.
 when 'jpg' or 'jpeg'.
 content_type = 'image/pjpeg'.
 when 'htm' or 'html'.
 content_type = 'text/html'.
 endcase.
 dsn = filename.
 OPEN DATASET dsn FOR INPUT IN BINARY MODE.
 IF sy-subrc NE 0.
 zmessage = 'Error opening file'.
 navigation->set_parameter( name = 'zmessage' value = zmessage ).
 navigation->goto_page( 'downloaderror.htm' ).
 exit.
 ENDIF.
 DO.
 READ DATASET dsn INTO file.
 EXIT.
 ENDDO.
 CLOSE DATASET dsn.
set response data to be the file content
runtime->server->response->set_data( file ).
runtime->server->response->set_header_field(
 name = 'Content-Type'
 value = content_type ).
concatenate 'attachment; filename=' filename into content_disposition.
runtime->server->response->set_header_field(
 name = 'Content-Disposition'
 value = content_disposition ).
set the file size in the response
content_length = xstrlen( file ).
runtime->server->response->set_header_field(
 name = 'Content-Length'
 value = content_length ).
runtime->server->response->delete_header_field(
 name = 'Cache-Control' ).
runtime->server->response->delete_header_field(
 name = 'Expires' ).
navigation->response_complete( ).
Thanks
Ajay

Hi Brian,
I have the same problem as Ajay Yeluguri. In http mode I can generate a download of an Excel document but when we use the portal in https it doesn't work.
When I try to download using https it does not pull the file name and path and when I choose download I have a error message : "Internet Explorer cannot download from ..."
I've test the point 3.2 "... including file up/download" of the BSP application IT00 and it works fine in http and https mode. My problem is not the upload but the download. And in this application the uploaded document is opened in the Internet Explorer window but I want to generate a Save as... window to download the file.
Have you an idea what i can do to solve my problem.
Thanks
Yann

Name of .crl and .crt file missing from HTTP URL in certificate details

Hello Everyone,
I am in the process of building a 2-tier Windows Server 2012 R2 PKI. The CA name of both the offline standalone root CA and enterprise subordinate CA have spaces in it (we'll call the CA name, 'Test Lab Root CA' for point of reference).
When I submitted the certificate request for the subordinate CA to the root CA and viewed the attributes/extensions of the pending request, I noticed the HTTP URL is missing the name of the .crt and .crl file.
The AIA extension reads URL=http://test.domainname.com/pki/.crt
in the issued certificate details.
The CDP extension reads URL=http://test.domainname.com/pki/.crl
in the issued certificate details.
The AIA and CDP location HTTP URLs are configured as http://test.domainname.com/pki/<CertificateName>.crt and http://test.domainname.com/pki/<CRLNameSuffix><DeltaCRLAllowed>.crl, respectively on the
root CA.
The LDAP URL shows the .crt and .crl file name (with %20 replacing the spaces) perfectly fine. The LDAP URL is configured using variables as well. It's just the HTTP URL that is missing the name of the file altogether.
I have read about the issue where spaces are not being replaced with %20 in the URL on Windows Server 2012 and a hotfix is available for that issue. But this issue seems to be slightly different and I'm running Windows Server 2012 R2. I tried installing
the hotfix to see if it would help, but the hotfix can't install because it doesn't apply to Server 2012 R2.
I've been trying to find a technet discussion or blog article for a week to see if anyone has seen this and what the fix is, but I'm coming up empty. I only find talks about %20 not replacing the space in the name.
Does anyone have any insight to my particular issue? I don't want to issue the subordinate CA certificate until I know the HTTP URL populates the CRL and CRT file name correctly. I can get around this by typing out the name of the file (with spaces and not
%20... e.g. http://test.domainname.com/pki/Test Lab Root CA.crl) in the URL via the registry and the URL displays the name of the file (with %20 in the name) when I do another certificate request and check the attributes/extensions in the
pending request. However, I prefer to avoid manually typing out the name of the file in the registry. I'd like to use the variables if at all possible.
Any help/guidance would be greatly appreciated.
Thank you.

On Fri, 27 Mar 2015 03:42:28 +0000, Brian Komar [MVP] wrote:
You have totally messed up the URLs.
If you run certutil -getreg ca\CRLPublicationURLs and certutil -getreg ca\CACertPublicationURLs, you will see that you do not have correct use of variables when compared to the settings that follow:
The URLs should be set to the following for an offline CA:
certutil -setreg CA\CRLPublicationURLs "1:%WINDIR%\system32\CertSrv\CertEnroll\%%3%%8%%9.crl\n2:http://test.domainname.com/pki/%%3%%8%%9.crl"
*certutil -setreg CA\CACertPublicationURLs "1:%WINDIR%\system32\CertSrv\CertEnroll\%%1_%%3%%4.crt\n2:http://*test.domainname.com*/pki/%%1_%%3%%4.crt"*
For an issuing CA, they should be set to:
The URLs should be set to the following for an offline CA:*certutil -setreg CA\CRLPublicationURLs "65:%WINDIR%\system32\CertSrv\CertEnroll\%%3%%8%%9.crl\n6:http://test.domainname.com/pki/%%3%%8%%9.crl"*
*certutil -setreg CA\CACertPublicationURLs "1:%WINDIR%\system32\CertSrv\CertEnroll\%%1_%%3%%4.crt\n2:http://**test.domainname.com**/pki/%%1_%%3%%4.crt"*
Just a clarification here, if you're running the above certutil commands at
the command prompt you only need single % characters in the command line.
The double % characters are only required if the commands are being run in
a batch file.
Paul Adare - FIM CM MVP

[CS3 JS SDK] Possible to Use HTTP URLs for Links?

I am attempting to use JavaScript to implement a connector from CS3 (InDesign/InCopy in my case) to our content management system. Our CMS provides an HTTP-based API. By using the HttpConnection object (from the Bridge code, see posts on "httpwebaccess library") I can access our repository using HTTP URLs and, for example, get an InDesign document or INX file (and the UI support in CS3 scripting makes it possible for me to build all the UI components I need without having to write a true plugin).
However, what I *can't* seem to do is create Link objects that use a URL, rather than a File, to access resources.
My goal is to be able to store in our repository InDesign documents that use URLs to other resources in the repository for links (e.g., to graphics and InCopy articles).
However, as far as I can tell from the scripting documentation and my own experiments, the URL property on Link is read-only in JavaScript (even though the scripting API HTML indicates it's a read/write property) and Link instances can only be constructed using File objects.
My question: have I missed some trick in the scripting API (or elsewhere) that would allow me to create links that use URLs instead of files (and having done so would InDesign resolve those URLs?)? Our repository does support WebDAV, so that might be an option, but it would depend on mounting WebDAV services in consistent places on client machines, which is dicey at best, given the weak nature of the WebDAV clients on both Windows and OS X).
Or are my only options to either copy linked resources to the client's local file system (or a shared network drive) or implement a plugin that implements my desired behavior for links?
And if the answer is a plugin, will that even work?
This is in the context of CS3. Has the Link mechanism changed at all in CS4 such that I could do what I want in CS4 where I cannot in CS3?
Thanks,
Eliot

Hi,
It is not possible to use HTTP URLS in CS3. You will have to create a plug-in to use Custom Data Links.
I think it is possible to use HTTP URLs in CS4 as per the User Guide.
Regards,
Anderson

Https URL entry in AAM SharePoint

Similar Messages

Maybe you are looking for