Httpunit and simulating multiple browsers

Hi!
I need to simulate two browsers with different users. When one of them changes a value, i have to measure the time it takes to get the changed price to appear in the other browser. The problem is to simulate the two different browsers. Does anyone have an idea? Any help appreciated.
thx
Andr�s

Run two copies of HttpUnit?

Similar Messages

  • Issues with having pages display correctley. It does this in multiple browsers, Chrome, IE, and FF. Some pages display correctley.

    I have been having trouble viewing pages in multiple browsers since last night. It has done this with me before. I am using an Acer Aspire and also Firefox version 23. I've tried looking online and following suggestions such as clearing the cache, retarting in safe mode, etc. Nothing seems to work. It's only on certain pages. For example- Facebook works and displays fine. It's when I go to websites like Amazon, Wix, Ebay, and others that I get the issue. The pages are displaying with a white background and just text/links and basic images. I've checked the page style and it is on Basic Page Style. Here is what I have:
    http://i45.photobucket.com/albums/f78/DovesPaintedJewel/screen2.png
    http://i45.photobucket.com/albums/f78/DovesPaintedJewel/screen1-1.png

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Control Design and Simulation and DAQ

    I'm learning Control Design and Simulations. I have some questions about it.
    1. For System Identification use, we can find the transfer function/model of the system by feeding data measurement from the system. But, how long data do we need to be sufficent for Identification System to estimate the model? Until the get saturated value (steady state)? or any other intervals? What if the system is unstable? How will Identification System Toolkit estimate that case?
    2. For connecting to hardware, we just connect the clock in the simulation loop to the hardware? And the simulation loop will simulate the blocks inside once it got the trigger/data from the DAQ? what about the step time and solver? Do they follow the timing from hardware? or they will run on their own supplied values/clock?if we use USB DAQ, we can't have any clock from it (as far as I know it's because USB connection is not that stable for clocking since it might be any jitters or delays.) So, how do we configure the timing parameter for USB DAQ?
    3. There is possibility to convert model in transfer function to state space, how do we know the states inside that conversion?
    Any helps would be great...
    Thanks in advance...

    Dear Chin ho,
    After going through your questions I found some documentation which will be useful for you. But I you still have more questions, you can reply me any time.
    1- About the data and amount of it I couldn't find any info but maybe you can use the new functions in LV version 2009 and find your answer.
    Estimating States of Nonlinear Stochastic State-Space Models with Extended Kalman Filters
    In previous versions of the LabVIEW Control Design and Simulation Module, you can use the Discrete Kalman Filter function and the Continuous Kalman Filter function to estimate the states of a linear discrete or linear continuous stochastic state-space model, respectively. In the LabVIEW 2009 Control Design and Simulation Module, you can use the Continuous Extended Kalman Filter function and the Discrete Extended Kalman Filter function to estimate the states of a nonlinear continuous or a nonlinear discrete stochastic state-space model, respectively.
    The Continuous Extended Kalman Filter function and the Discrete Extended Kalman Filter function estimate model states of a partially observable plant based on noisy measurements. First, use the SIM Discrete Nonlinear Plant Model template VI or the SIM Continuous Nonlinear Plant Model template VI, located in the labview\templates\Control and Simulation directory, to define the system model. Then use the the Discrete Nonlinear Noisy Plant function or the Continuous Nonlinear Noisy Plant function to simulate the discrete or continuous nonlinear model, respectively, with the addition of noise. Finally, use the Continuous Extended Kalman Filter function or the Discrete Extended Kalman Filter function to estimate the states of your model.
    The Continuous Extended Kalman Filter function and the Discrete Extended Kalman Filter function linearize the nonlinear system either by calculating a Jacobian matrix internally or by using an external Jacobian matrix that you define. Use the SIM Continuous Jacobians template VI or the SIM Discrete Jacobians template VI, located in the labview\templates\Control and Simulation directory, to define an external Jacobian matrix.
    Refer to the LabVIEW Control Design User Manual, accessible by navigating to the labview\manuals directory and opening CD_User_Manual.pdf, for more information about estimating the states of nonlinear stochastic state-space models with extended Kalman filters.
    2- I think that I found a pdf document about this part of your question which will be helpful. If you would like to give your email address, I can send it to you.
    3- About this part you can check the help function in LabVIEW when you open the "CD Convert Transfer function To State-space" function in your front panel.
    I pasted some info about the mathematic part below.
    The LabVIEW Control Design and Simulation Module provides tools to study the dynamics of systems described by linear time-invariant (LTI) continuous and discrete models. You can create deterministic state-space, transfer function, and zero-pole-gain models. You also can create stochastic state-space models and the second-order statistics noise models.  You can use these forms to describe both single-input single-output (SISO) and multiple-input multiple-output (MIMO) systems.
    Continuous transfer function and zero-pole-gain models use the s variable to define time, whereas discrete transfer function and zero-pole-gain models use the z variable to define time.  Continuous state-space models use the t variable to define time, whereas discrete state-space models use the k variable to define time. 
    Deterministic State-Space Model
    Continuous
    x(t) = Ax("t) + Bu(t)
    y(t) = Cx(t) + Du(t)
    Discrete
    x(k + 1) = Ax(k) + Bu(k)
    y(k) = Cx(k) + Du(k)
    Stochastic State-Space Model
    Continuous
    x(t) = Ax(t) + Bu(t) + Gw(t)
    y(t) = Cx(t) + Du(t) + Hw(t) + v(t)
    Discrete
    x(k + 1) = Ax(k) + Bu(k) + Gw(k)
    y(k) = Cx(k) + Du(k) + Hw(k) + v(k)
    Second-Order Statistics Noise Model
    Q = E{w . wT} – E{w} . ET{w}
    R = E{v . vT} – E{v} . ET{v}
    N = E{w . vT} – E{w} . ET{v}
    where
    t is continuous time.
    k is the model sampling time multiplied by the discrete time step, where the discrete time step equals 0, 1, 2, …
    x is the model state vector.
    u is the model input vector.
    y is the model output vector.
    w is the process noise vector.
    v is the measurement noise vector.
    A is an n × n state matrix of the given model.
    B is an n × m input matrix of the given model.
    C is an r × n output matrix of the given model.
    D is an r × m direct transmission matrix of the given model.
    n is the number of model states.
    m is the number of model inputs.
    r is the number of model outputs.
    G is a matrix relating w to the model states.
    H is a matrix relating w to the model outputs.
    Q is the auto-covariance matrix of w.
    R is the auto-covariance matrix of v.
    N is the cross-covariance matrix between w and v.
    E{} denotes the expected value or the mean of the enclosed term(s).

  • Testing in multiple browsers

    I hope I'm not duplicating a discussion I think would have
    been somewhere on this forum...I just can't find it.
    However, when building Flash help (or WinHelp for that
    matter), I need to test under both FireFox and IE. Unfortunately,
    it seems as if RH only recognizes FireFox for me (since it is
    defined as my default browser).
    Is there a way that I can tell RH that I have two browsers,
    and want to use them both to preview/test output so that I may
    chose which to use? Added both Firefox and IE to the toolbox
    doesn't seem to work and I don't see any option elsewhere to define
    my browsers. (I think FrontPage and Dreamweaver both let you define
    which browsers you want to use to test with, and you can define
    multiple browsers.)

    <chuckle> and now you see why I prefer Firefox!!
    Unfortunately, since we do have a number of Unix users and develop
    for both Win and Unix environments, I'm somewhat disappointed to
    see this answer. Seems as though we have a lot of users who use
    Firefox. Must admit, it is a minor disappointment but there are
    some differences between Firefox and IE so it's usually a good idea
    to test and review under both browsers.
    I'll look around for the Firefox extension and if I can find
    it, I'll try to post it here.

  • After Mountain Lion install, internet videos stop playing back after only a few seconds. Multiple browsers are affected.

    After I installed Mountain Lion, videos streamed from the internet will stop playback after a few seconds of play. Multiple browsers are being affected.

    I have this same problem, and I did a clean installation.
    Hardware:
    2009 MacBoook Pro 17" 3.06 C2D; 4 GB RAM, 256 Apple SSD
    While loading the browser is quick starting up, I notice a delay to open any website, like it's preloading the entire page versus just loading.  Safari seems like it's a bit sluggish overall with loading web pages.
    Did a internet speed test and my U/D rates are the same after the upgrade.

  • Chat support not working on multiple browsers

    Have been trying to start chat sessions throughout the week with no luck. It's been during chat hours, and have tried multiple browsers.
    Such long wait times with phone support that I hang up before an answer.
    Any response would be greatly appreciated. It's a shame to have such horrible support / customer service with a paid membership.

    It's not working for me either.

  • Synchronize Control and Simulation loops

    When simulating control systems with LV Control and Simulation loops, I often have multiple loops running at different rates. For example, I have a PWM loop running at 20 kHz, a data acquisition loop running at 100 kHz, and a control loop running at 10 kHz. How can I synchronize all of these loops so that they stay on the same time base? Obviously the master time base will need to be at least as fast as the fastest simulation loop.
    I've tried synchronizing all loops to the 1 kHz clock (I'm running on Windows), but each loop runs one period per clock tick (e.g. my 20 kHz loop counts up 50us per clock tick, my 100 kHz loop counts up 10us per clock tick, etc). I need all of the loops to be synchronized to one master time base so the simulation time is identical in each loop, but each loop will be executed at a different rate.
    Any thoughts?
    Solved!
    Go to Solution.

    Hello,
    A quick suggestion - why can't you run all three systems in a single simulation loop, but have different sample rates for the blocks for each system ?
    Is your system entirely digital, or a mixture of continuous and digital - it may simplify things if you can convert everything to discrete time.
    Hope this helps,
    Andy Clegg
    Consultant Control Engineer
    www-isc-ltd.com

  • Firefox will not close, will not open multiple browsers

    In Firefox this question "ask this" dialog box in chinese: Program will not close properly, must "end Process" in tsk mgr. Will not open multiple browsers. Started after downloading "Java" update.
    == This happened ==
    Every time Firefox opened
    == This morning ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; WWTClient2)

    See http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)

  • Open and print multiple files from the Finder all at once.

    I'm trying to research how to do this. In OS9 you used to be able to hi-lite multiple files (Word files for example) and just hit Command+P. This would automatically open all of the files AND print them.
    I can't seem to do this in my OS X. Or can I? I can hi-lite and go to File/Print, but the computer is only opening but not printing.
    Any suggestions??
    iMac   Mac OS X (10.4.8)  

    I don't know how to both "open and print" multiple files in one step. The ⌘O combination of course will open multiple items. The items remain selected so switching back to the "Finder" and dragging multiple icons onto the icon for "/Applications" > "Utilities" > "Printer Setup Utility.app" seems to cause them all to be printed to the default printer.
    Alternatively, a user's "~/Library/Printers" folder contains printer icons -- I'm not sure what they are exactly, but they represent the printers set up for that account. They function pretty much like the pre-OS X "Desktop Printer" icons so dragging and dropping multiple files onto them should cause them to be printed. It may even be possible to create aliases to them on the "Desktop" to recreate "Desktop Printer" functionality. But again, this won't open the files into their applications.

  • I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

    I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded.  Help - thank you

    Could you share a link to the page?
    Seeing it in context and in our browsers is much easier to debug.
    If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

  • How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    Try this general troubleshooting procedure:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks and Yosemite,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • Windows XP and authorizing multiple users on same computer

    What is the best way to share songs and authorize multiple users (unique XP users on the same computer)?
    Are all users on XP considered to be on unique authorized computerers?
    Thank you.

    Authorization is done on a per-OS basis; all users on one OS installation are considered to be on the same computer.
    (25930)

  • How to cancel email notification from snapshot and simulation

    Hi,
    We've activated workflow template WS28700001 so that email notification can be triggered when task release. Meanwhile we are using snapshot and simulation at the same time. But when saving sanpshot or simulation the tasks which have status of released also trigger email nofitication. How to cancel this notification of snapshot and simulation?
    Regards.

    Hi Ravi
    I have added a Container Element(version) in workflow template WS28700001 and set a workflow start condition as follows.
    &Task.Version& = ' '
    Regards
    Yemi

  • How to find and replace multiple cells at a time

    I am doing repetitive work re find text in numbers but then replace following cells with text. How can I find and replace multiple cells at a time?
    i.e. doing my own budget spreadsheet and coding all transactions with description and code

    Did you try the "Find/Replace" dialog box?:
    Then click the "Replace All" button in the bottom left.

Maybe you are looking for