HUI & Logic 7 - freezing makes HUI "off-line"

After using the Mackie HUI in ProTools I just started to use it in Logic Pro 7.1.1 and whenever I freeze a track the HUI looses contact with Logic, goes "off-line" and a warning pop-up stops the freezing process until you press the OK button, keeps comming up in 10-15 sec intervals until freezing is done. Really anoying. Is there a workaround, anyone with this setup?
/Mathias

Spoke to Mackie support about this issue and the reason for HUI going off-line is that Logic stops sending "active" midi-signals when "freezing" tracks (WHY?). Anyone has any idea to why Logic should stop sending midi while it is busy "freezing"?
/Mathias

Similar Messages

How do I make my "off-line" printer go on-line?

I am a new MacBook user. I have windows network. I installed printer CUPS driver for my brother 7820N printer. can print when connected directly with USB. MB recognizes printer when not connected directly...must be going through the wireless network. try to print and little printer icon on DOCK starts jumping...says printer is Off-Line. can see the files in the queue.
Any ideas on how to make the printer "on-line"? Thank you.

My Brother 2170-W printer just began giving me the same "off-line" message I called Brother support and they were very responsive and said it was a problem with the new OS 10.5.5 update and they would have a patch shortly (in a week maybe?).
Linda

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect". I checked to make sure IE is not off line. Any suggestions please?

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?

Try using a different browser as a test.

How to make a website available off-line

How can I make the content of a website available off-line? In the "old days" this was common, and built in to web browsers. A whole site could be downloaded and all links too 2 or 3 levels deep. Then the content would be available when not online. Changes would sync periodically. I've searched addons but nothing ("Download Them All" is a start, but only gets links one level deep from the page you're on at the time.)
Thanks!

Hi,
Did you check this discussion
How can i create a multilingual website?

IPhone 5 keeps freezing and wears, clearish lines appear on the phone when it freezes. I have to constantly turn the phone on and off to used at all!!??

iPhone 5 keeps freezing with wired clearish lines on the screen. Help!!!?.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Is there a way to make a micro-website available off-line as an application?

I have a small website that is built in html that includes video files and some pdfs. I would like to make this site available off-line on the iPad so that I can show it even when I don't have an Internet connection. Can anyone give me some advice on techniques, software, or vendors that can help me do this?

Matt, I use Gusto, which is actually a markup editor. But it allows you to download site files and run the HTML from within the app, so even though it wouldn't be visible on your homescreen, at least you could run the site offline.

My Iphone 5 does this weird thing where it just freezes, some random vertical lines show up, and shuts off. Does anyone know what the cause of this is?

My Iphone 5 does this weird thing where it just freezes, some random vertical lines show up, and shuts off. Does anyone know what the cause of this is?

Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

Logic 8 freezes when clicking on the recording button (audio)

I am a newbie, switched recently.
When I click on the record button, Logic 8 pauses for more than a minute before starting audio recording normally. The external hard drive where my project files are saved becomes "very active" during the pause and then works normally when audio recording starts.
Thsi happens only on the files I imported from the OMF and Midi files created on my previous DAW (Sonar6).
I tried to record audio in a blank project: no problem at all.
This is not a problem of the external drive spinning off when not used because Logic freezes everytime I click on the record button even if I do it immediately after a previous (very short) recording test so the hard drive does not have to spin back on. Tried on my 3 external drives (2 USB, 1 firewire) same problem.
All my external drives are also used with Windows so they
have the Fat32 format.
Copied a project file to my MacBook desktop: no recording freeze problem!
Might be linked: I am a bit surprised with the project file sizes: 500 to 600 MB each file created from OMF and Midi Sonar exports! (average 5 audio tracks, 5 instrument tracks, I use Stylus RMX for drums).
They were much much smaller on my PC as Cakewalk Sonar files. Are these normal project files sizes with Logic?
Thanks for your help
Bluescat
MacBook 2.2 Ghz
Leopard
Logic Pro 8
Edirol UM 880
Line 6 Toneport UX2
http://www.myspace.com/chrisbluescat

When I click on the record button, Logic 8 pauses for more than a minute before starting audio recording normally. The external hard drive where my project files are saved becomes "very active" during the pause and then works normally when audio recording starts.
At a guess I'd say - is your external drive Mac-formatted or PC formatted? Seeing as you were using Sonar, you've obviously come from the PC. You should not use FAT drives, you should format them to the native Mac format.
All my external drives are also used with Windows so they have the Fat32 format.
Ah. There you go.
See:
http://discussions.apple.com/thread.jspa?messageID=7290767
500 to 600 MB each file. Are these normal project files sizes with Logic?
"Normal" is entirely relative. Some people's projects are much smaller. Some are much larger.

HP Officejet Pro 850 showing off line when it is turned on and plugged in.

Ungh, it has been weeks now and this printer has just stopped working and is showing OFFLINE. It was plugged into the back of the computer all year and worked fine and it just stopped printing so we plugged it into the USB port at the front of the computer and it worked for a while and now no matter where we plug it in, we can see it there in the devices and printers but it is greyed out. You can make it default no problem but it just will not print. We have downloaded the driver off the site over and over, uinstalled it over and over, when you select a document to print you can send the print to the printer, you can see it listed there but it just does not print. I just went to the HP site and downloaded some kind of printing wizard assisstant or something and it sent a test page to the printer and it worked but this computer for whatever reason it gives me the message every time we try and print "Printer off line" Anyone have any suggestions? Very frustrating. Thanks! Mike

Hi Mike-lake,You may find this document helpful. It covers a number of situations with the printer showing "offline" and walks through fixing this. http://support.hp.com/us-en/product/HP-Officejet-2620-All-in-One-Printer-series/5357283/model/5385219/document/c04249080Please let me know if this corrects the issue for you!Jean

I seem to have multiple problems related or unrelated. I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line. My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
S

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Mail in 10.7.5 suddenly off line on all my devices....HELP

iMac (24-inch Early 2008) running OS 10.7.5
MacBook Pro (15-inch Mid 2010) running OS 10.7.5
iPad 2 (wifi) running iOS 6.1.3
iPad 4 (wifi) running iOS 6.1.3
Here's the problem. I have internet connection. But suddenly today all my devices are off line in Mail.
Have re-set my dsl modem multiple times.
Ran Connection Doctor and got red lights on all 4 of my mail accounts (iCloud, 2x verizon addresses, and a work email address)
Checked all the settings and as far as I can figure, the are what I have been using.
EXCEPT......when I open the EDIT OUTGOING SERVER area of the Mail preferenced for my iCloud account, it choses my work account server. I re-set and save it. But it's right back to the wrong server when I go back to check. WHAT"S UP with that??????
Anybody have any insights into this problem?
Yes, I can get my email on the individual websites, but that means signing on and off of 4 websites every 15 minutes or so. Not gonna work.
Thanks for any suggestions.
Signed,
Tearing my hair out

Hello Snappi,
Thank you for all the information you provided about what is going on with Mail on all your Apple Devices. I found an article with steps that I think might help.
I recommend reviewing the article, but I found some steps that sound like they apply specifically to what you are experiencing in the section titled "Mail Connection Doctor shows one or more red dots in the account Status column>Click here if your Incoming and Outgoing email account settings are correct, but the issue persists>Click here if a 'Could not connect to this (server type) server…' message appears":
Click here if a "Could not connect to this (server type) server…" message appears
Check for third-party firewall software
Third-party firewall software, such as Little Snitch or Symantec Norton Personal Firewall, could be blocking the necessary ports. If such software is installed, make sure the firewall is not blocking these ports:
ports 25, 465, and 587 (for sending email via SMTP)
ports 143 and 993 (if you use IMAP email)
ports 110 and 995 (if you use POP email)
If you're not sure how to enable the correct ports, try disabling the third-party firewall completely, then test for the Mail issue. Note: The Mac OS X v10.6 firewall does not interfere with ports needed to send email.
Check for Internet Service Provider port blockingYour Internet Service Provider may be blocking the SMTP ports needed to send email.You can use Apple's MobileMe service to find out if your Internet Service Provider is blocking the sending email protocol SMTP:
Open Network Utility in the Utilities folder—in Finder, choose Go > Utilities (or press Shift-Command-U).
Click the "Port Scan" tab.
Enter "smtp.me.com" in the "Enter an Internet or IP address to scan for open ports" field.
Enable "Only test ports between _ and _", and enter 25 for both port fields.
Click "Scan" to test.
If you do not see "Open TCP Port: 25 smtp", contact your Internet Service Provider or visit their support website for further assistance. If you do see "Open TCP Port: 25 smtp", your Internet Service Provider is not blocking the SMTP ports needed to send email. Go to the "'Trying to log in to this (email server provider name) account failed…' message or any other error message appears" section below if the email issue persists.
You can find the full article here:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

How can I save a previously published web page off-line instead of deleting

I have some web pages with photos I do not want to post anymore on my iWeb site. However, I do not want to "delete" the pages because I spent so much time putting them together. Is there a way to save them off-line somewhere for access later on? I am a Scoutmaster and post photo pages of our hikes and adventures. I prefer to save my "masterpiece" pages somewhere for future reference instead of deleting them, which is the only option, to make room for more pages.
Thank you so much for assisting me.
p.s. Is there a number limit to the amount of photos I can drag over from iPhoto to an iWeb photo page?
iMac, Powerbook G4, MacBook Pro Mac OS X (10.4.10) Love Macs. I've owned a Mac since the 128 in 1984.

See this article: "Separating Sites in a single Domain"...
http://web.mac.com/mark8heaton/iWeb/DomainSeparation/SiteSeparation.html
iWeb's Help viewer says: "The photo grid holds up to 99 photos." But you can have multiple Photos pages and create a living, growing photo gallery...
http://www.mac.com/web/en/Tips/013C4180-4787-4847-BAAB-319222AFC652.html

Mail 7.3 Accounts Off-line

A domain name recently expired and was renewed after three days. Two Mail accounts related to that server stopped working in Mail, which shows the dreaded 'account off-line' message.
Both incoming and outgoing mail servers are described as not working.
I have manually re-set in-coming and out-going ports and passwords, to no avail. I have taken all accounts off-line, waited a few minutes, then set them all to on-line. I have quit and re-started Mail.
I can access these accounts using web mail from a browser. I have contacted the administrators of the commercial web host and they say these mail accounts are working normally.
Apple Mail seems to be the culprit.
I can delete the accounts and re-make them, but there is a Lot of e-mail in the problematic accounts that would be lost.
Suggestions?

All right: if Mail tells you:
The server returned the error: The server “mail.domainname.com” refused to allow a connection on port 110.
you can verify the truth or otherwise of this statement by opening a command Shell and typing:
telnet domainname.com 110
If the server is responding to connection requests on port 110 you will see something like this in the Shell:
Connected to server.ISPdomainname.com.
Escape character is '^]'.
+OK <[email protected]>
This message confirms that port 110 is working. Unfortunately, it also confirms that Apple Mail is not telling the truth.
My ISP's server is allowing me to connect with it on port 110. Mail is not working, nor is it telling me the truth.

All photos appearing off-line

All photos in in my Lightroom 5, appearing off-line with question mark next to all folders. I have over 45,000 photos. How can I get everything to show up again. First time this has ever happened.

jasahb wrote:
Did not move, rename or delete the 49,815 files that are showing up as being off-line.
In the many years I have been doing this, I have seen examples where people accidentally do something, and you might want to check your operating system and make sure your folder names, file names and drive name/letters haven't been accidentally changed. And also what Jim Wilde said.

LR Off-line DVD Storage - Any Thoughts on How to do

After time passes, I like to move raw files from my hard drive to a DVD. I want to continue to keep these raw files that have been moved to the DVD as part of my LR catalog, including their thumbnail image. This way I can easily locate raw files stored off-line on a DVD. So far my solution is to take all of the files that I will be moving to a DVD, add them to a child-collection called for example DVD-32 (parent collection is called DVDs-RAW Files). I also, select all of the files and add the keyword, in this example 32. Then I copy these files to the DVD-32, delete them from the hard drive. The folder(s) shows as red in the LR library folders. Each files thumbnail is still retained. When I select a file, I know what DVD it is stored on by looking at the keyword. The reason I created the collection of files on a DVD is to provide an easy way to know what files are on a particular DVD. This is a more cumbersome process than what I did using IMatch, which was designed to catalog off-line files. I wonder if there is a simpler way to do this in LR.
Thanks for any thoughts on this.

Also there are some pretty worrying reports about DVD and CD reliability unless you use the Gold Archive disks [that I use, but I no longer archive to DVD or CD].
I now use a grandfather, father, son backup/archive method with grandfather,father in my safe deposit box. When I feel enough changes have been made, I put son in SD box and bring out GF, reformat, check for errors, and do a backup to set the new baseline.
I check my HDs for errors frequently.
I only lost data once, that was when I was replicating deletes and my main HD got corrupted and I transferred those deletes to my backup. I like being able to "look" at my backup/archive files.
People may say that I should still archive to optical media, but to me it is no more safe than my method. I would have to constantly re-read my optical disks to make sure they were not failing.
Also, I expect to pass the 20,000 file mark this year and that is about 25 DVDs [expect 95 GB or so] and making sure they are good looks daunting. Maybe when/if the blue ray technology arrives with appropriate archive/validation s/w I will change my mind.
Meanwhile, I am looking at ads for 500 GB HDs :-)
Mel

HUI & Logic 7 - freezing makes HUI "off-line"

Similar Messages

Maybe you are looking for