Hyperion Finacial Reports Schedule Batch with Mutliple POV and Datasources

I have a report Book that has a User POV. In the Book, the reports are set to Book POV. There are multiple reports in the book, with 3 different datasources. I have created a batch with this report books. I am trying to schedule the batch using "MULITPLE" members for the POV so that the batch creates mutliple books - one for each of the cost centers in my Multiple Batch POV. The issue is that I cannot seem to define the Multiple POV list for all three datasources - only the last one seems to count, the rest resort back to the User POV? Does this only work if the report has onl a single Datasource or is there something special that has to be done to override the User POV with the Batch POV for each of the three datasources?

You are probably better off posting this in Reporting forum
Hyperion Query and Reporting
Cheers,
Abhishek

Similar Messages

Financial Reports - Schedule Batch

I have a report Book that has a User POV. In the Book, the reports are set to Book POV. There are multiple reports in the book, with 3 different datasources. I have created a batch with this report books. I am trying to schedule the batch using "MULITPLE" members for the POV so that the batch creates mutliple books - one for each of the cost centers in my Multiple Batch POV. The issue is that I cannot seem to define the Multiple POV list for all three datasources - only the last one seems to count, the rest resort back to the User POV? Does this only work if the report has onl a single Datasource or is there something special that has to be done to override the User POV with the Batch POV for each of the three datasources?

You are probably better off posting this in Reporting forum
Hyperion Query and Reporting
Cheers,
Abhishek

SCCM 2012 report on computers with local shares and share permissions

Very new to SCCM 2012, want to put together a report to show computers with local shares and the permissions on those shares (for security purposes, need to investigate any systems that have open shares_.
Managed to add and now collecting information that populates v_gs_share and I have a handle on the report itself, just wondering how to collect the share permissions - I've seen other qustions on the boards that are similar but reference earlier versions
of SCCM so wondering how to do it in 2012.
Thanks

So, where are you at? The script is running, and the clients have the data in their local WMI namespace, root\cimv2\sms_sharepermissions ?
So all that's left is to modify hardware inventory to pull that custom WMI Namespace in? If so, it's not too horrid. Take note of a workstation (or server) to which you have remote rights to; and which has run the script, so that on THAT specific
machine, root\cimv2\SMS_SharePermissions exists.
In your CM12 Console, Administration, Client Settings. Right-click "Default Client Settings", Properties. On the left, select "hardware inventory". then on the right, Set classes..., now the fun part.
Add...
Connect..., and put in ThatServerOrWorkstation (for computername), and wmi namespace is root\cimv2. Click the option "recursive", Connect. (the trick here is rights to the target).
From the results, it might be easiest to click on "classname" at the top for sorting, then go find SMS_SharePermissions. Select that, ok ok ok ok (however many times you need to agree); and... we're done here. Sit and wait for inventory to report
that data up. If you're paranoid, you can monitor dataldr.log; and force policy refreshes and hinv deltas on some boxes; but the key is patience. if you think you've waited long enough; you probably haven't. ;)
Standardize. Simplify. Automate.

Task Scheduler PS1 with convertto-html and send-mailmessage doesn't deliver HTML, works in E201SP2RU5 EMS

When I run the script below from EMS it's delivered with the expect HTML table. but if I run it from a task in task scheduler the html is missing.
I've tried launching it in Task scheduler a couple different ways with the same results. This is what I'm using now:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -ServerFqdn exchange.domain.com; C:\scripts\TESTER.PS1"
Any ideas?
=========================
$a = "<style>"
$a = $a + "BODY{background-color:White;}"
$a = $a + "TABLE{border-width: 1px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TH{border-width: 1px;padding: 5px;border-style: solid;border-color: black;background-color:LightSteelBlue}"
$a = $a + "TD{border-width: 1px;padding: 5px;border-style: solid;border-color: black;background-color:Linen}"
$a = $a + "</style>"
$MBexportBatchRprt = Get-MailboxExportRequest -ResultSize unlimited -BatchName Test-Batch |
    sort name | Get-MailboxExportRequestStatistics |
    select Name,PercentComplete,status,StartTimestamp,CompletionTimestamp,OverallDuration, EstimatedTransferSize, EstimatedTransferItemCount, BadItemsEncountered |
    ConvertTo-Html -Head $a |
    Out-String
$messageParameters = @{
    Subject = "Report 1"
    Body = "Contact [email protected] with problems. <br/><br/> $MBexportBatchRprt"
    From = "[email protected]"
    To = "[email protected]"
    SmtpServer = "exchange.domain.com"
Send-MailMessage @messageParameters -BodyAsHtml
=========================

When I run the script below from EMS it's delivered with the expect HTML table. but if I run it from a task in task scheduler the html is missing.
I've tried launching it in Task scheduler a couple different ways with the same results. This is what I'm using now:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -ServerFqdn exchange.domain.com; C:\scripts\TESTER.PS1"
Any ideas?
=========================
$a = "<style>"
$a = $a + "BODY{background-color:White;}"
$a = $a + "TABLE{border-width: 1px;border-style: solid;border-color: black;border-collapse: collapse;}"
$a = $a + "TH{border-width: 1px;padding: 5px;border-style: solid;border-color: black;background-color:LightSteelBlue}"
$a = $a + "TD{border-width: 1px;padding: 5px;border-style: solid;border-color: black;background-color:Linen}"
$a = $a + "</style>"
$MBexportBatchRprt = Get-MailboxExportRequest -ResultSize unlimited -BatchName Test-Batch |
    sort name | Get-MailboxExportRequestStatistics |
    select Name,PercentComplete,status,StartTimestamp,CompletionTimestamp,OverallDuration, EstimatedTransferSize, EstimatedTransferItemCount, BadItemsEncountered |
    ConvertTo-Html -Head $a |
    Out-String
$messageParameters = @{
    Subject = "Report 1"
    Body = "Contact [email protected] with problems. <br/><br/> $MBexportBatchRprt"
    From = "[email protected]"
    To = "[email protected]"
    SmtpServer = "exchange.domain.com"
Send-MailMessage @messageParameters -BodyAsHtml
=========================

Report by month with Valuated stock and special stock by storage location

Dear All,
I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
I try it with MCBE tcode, but i only get "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
Does anyone know how can solve it?
Thanks in advance,
Sebastiá

Hi,
Use MC.9 T.code.
click on "switch drilldown" and select storage location.
Regards
Hari

Crystal Reports scheduling disregard the default values and requires prompts to be answered every time.

Hi guys,
When scheduling a Crystal report, the page to configure the prompt answers does not have any prompts answered by default - they all appear as "[EMPTY]". This means that any required prompts must be answered during configuration of the alert schedule. Since prompt is required and the default value (which is equivalent to not answering the prompt) is not available in the selection list.
Is there any way around it?
Ideally I would like the prompts to keep the default values, so I could schedule the report for all the prompt answers (Whole list of value) instead of having at least one prompt value.
Is there any configuration in crystal reports or on database side that could help me resolve the issue.

First off, Thank you for your replies!
Rabeb SLIMANI, we can't use universes by user requirement. If we could, it would have to be through IDT (Information Design Tool) but, nonetheless, the users want a direct BICS connection between BEx and WebI.
Victor Gabriel Saiz Castillo, we can't do that because the users want to choose between accessing the published instances or refreshing the reports on demand.
The way i see it, it would take a second set of BEx query + WebI report to provide both functionalities (one for ready for input, another for not ready for input). Am I correct?
@Sathish Kumar (sorry, i can't tag you right), i was checking with the BW team and we already have the logic for If left null, populate with Customer Exits.
But they are currently mandatory, so we will change them to optional and test the behavior.
If you have any other ideas, they are more than welcome! I will keep you posted on the outcome!
Best regards,
Francisco

Report Generation Toolkit with Excel 2003 and Excel 2000

Hello,
I'm using the Report Generation Toolkit to generate an Excel report from an Excel template.
The "NI_Excel.lvclass" is included in the "source" section of the application builder options.
I create an exe file on a PC where Excel 2003 is installed. On a Notebook, where only Excel 2000 is installed, the application crashes at the generation of the report:
I guess the problem is the different version of Excel but I don't know. On the developer PC with Excel 2003 it works fine.
In this document it's only talked about different Word versions.
How can I use the Report Generation Toolkit here?
I'm using it that way:
Regards

Oh, it seems that the Report Generation Toolkit "only" supports Excel XP/2003/2007.
I think, that's the problem.

Note:589024(Reports in BW with St.Loc and St.Type)

Dear Guys,
I got an situation with the Query on 0IC_C03 Cube.The "0TOTALSTCK"KF is getting the values at the Query for all movment types except 311,101,641.Further i found that i need to apply note:589024 to resolve this,but i am having difficulty in Restricting : 0Stocktype,restricted to all values greater than or less than "INITIAL"(="#/#")(Exclude from selection).. I did try by R,clicking the 0Stocktype-->Restrict....But there's no option like "Greater than or Less than",leave alone options like "Greater than" or "Less than"...It would be fantastic if someone could take time to help me out with this..
Manythanks
Arun

I did try by R,clicking the 0Stocktype-->Restrict....But there's no option like "Greater than or Less than",leave alone options like "Greater than" or "Less than"...It would be fantastic if someone could take time to help me out with this..
Arun, if the above issue is going to resolve by restricting the stocktype. i think Stocktype restrict with < or > is not possible in this case better go for custom exit variable for stock type and in the user exit you can restrict with < or > values if the values are less and try to get the values of kf as per your requirements.
Try it out and hope it helps.
Regs,
Vachan

Block creation issue with new entity and datasource

The below calculation script that will not create blocks. This is just one of the formula for one cost account. the formula repeats similarly for other cost accounts. When ran it won't create blocks so #missing data. I even tried switching the "AccountCenter" (account dimension dense) and use "DS" (datasource dimension sparse) instead but it runs a lot longer and causes delays in any other calc script that runs after that. I have tried lock and send from excel smart view for those blocks only and it works the first time the script is run. But every time after the first time the script runs forever and never ends. i had tried set createmissingblock on but that just slowed down everything.
FIX ("Jan":"Dec", @RELATIVE(Entity1, 0), @RELATIVE(Entity2,0), "P_PRojects", @RELATIVE(Project1",0),"Actual", &CurrFcst, &CurrFcstVersion, FY15:fy21)
"AccountCenter"
@CALCMODE(BLOCK);
IF (@ISMBR (@RELATIVE("ParentAccountCenter",0)) AND @ISMBR(@RELATIVE("ParentProject",0)) AND @ISMBR ("DS"))
IF((@ISMBR(&FcstStartMo:"Dec") AND @ISMBR(&FcstYear1) AND @ISMBR(&CurrFcst)) OR (@ISMBR(&FcstYear2:&FcstYear7) AND @ISMBR(&CurrFcst)) OR (@ISMBR(&CurrMth) AND @ISMBR(&CurrYr) AND @ISMBR("Actual")))
"AccountCenter"=1AccountPct->RetailFP&A*AccountCenterPct->RetailFP&A*AccountCenterAgregate Pct->"RetailFP&A"*("DS_ALL"->"P_Cost"->P_Projects-"DS_ALL"->"722020"->P_Projects-"DS_ALL"->"722200"->P_Projects-"DS_ALL"->"562040"->P_Projects);
IF (@ISMBR(@RELATIVE("otherEntity",0)))
@MEMBER(@SUBSTRING(@NAME(@CURRMBR("Entity")),11,24)) = @MEMBER(@SUBSTRING(@NAME(@CURRMBR("Entity")),11,24)) + @CURRMBR("Entity");
ENDIF
ENDIF
ENDIF
ENDFIX

Account (dense)
Period (dense)
Data Source (sparse)
Entity (Sparse)
Project (Sparse)
Scenario (Sparse)
Version (Sparse)
Year (Sparse)
EntityFunc Attribute
Members
Account (dense) - "AccountCenter"(level1), "AccountCenter"(level0), 1AccountPct, AccountCenterPct, AccountCenterAgregate Pct, P_Cost", "722020", "722200", "562040"
Data Source (sparse)- DS, DS_ALL
Entity (Sparse)- Entity1, Entity2
Project (Sparse)- RetailFP&A, P_Projects
FIX ("Jan":"Dec", @RELATIVE(Entity1, 0), @RELATIVE(Entity2,0), "P_PRojects", @RELATIVE(Project1",0),"Actual", &CurrFcst, &CurrFcstVersion, FY15:fy21)
"AccountCenter"
@CALCMODE(BLOCK);
IF (@ISMBR (@RELATIVE("ParentAccountCenter",0)) AND @ISMBR(@RELATIVE("ParentProject",0)) AND @ISMBR ("DS"))
IF((@ISMBR(&FcstStartMo:"Dec") AND @ISMBR(&FcstYear1) AND @ISMBR(&CurrFcst)) OR (@ISMBR(&FcstYear2:&FcstYear7) AND @ISMBR(&CurrFcst)) OR (@ISMBR(&CurrMth) AND @ISMBR(&CurrYr) AND @ISMBR("Actual")))
"AccountCenter"=1AccountPct->RetailFP&A*AccountCenterPct->RetailFP&A*AccountCenterAgregate Pct->"RetailFP&A"*("DS_ALL"->"P_Cost"->P_Projects-"DS_ALL"->"722020"->P_Projects-"DS_ALL"->"722200"->P_Projects-"DS_ALL"->"562040"->P_Projects);
IF (@ISMBR(@RELATIVE("otherEntity",0)))
@MEMBER(@SUBSTRING(@NAME(@CURRMBR("Entity")),11,24)) = @MEMBER(@SUBSTRING(@NAME(@CURRMBR("Entity")),11,24)) + @CURRMBR("Entity");
ENDIF
ENDIF
ENDIF
ENDFIX

Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
When I enter the value , it just vanishes. Am I missing something here.?
I need to set export path for PDF generation in Hyperion financial report for batches.

Edit FRConfig.cmd and update
set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
update epmsystem1 to the correct epm instance name
Cheers
John
http://john-goodwin.blogspot.com/

POV in Hyperion Financial Reporting Studio and Workspace

Hi!
I have the following problem.
I create a report in Hyperion FinReporting Studio, choose required members in POV. Save report.
Then I open it in Workspace and sometimes my chosen POV crushed: sometimes there are no chosen members, sometimes there is a free space.
How can I fix it? (It's not acceptable to choose POV as a prompt all time). Is it a bug?
Thanks.
Natallia

Hi Natallia,
well first there are two type of POV in Hyperion financial reporting.
1. User POV
2. Grid POV
If you are never getting the USER POV in workspace then it may be that "Preview User Point of View" is off.
Just check it under FIle-->Preferences-->Financial Reporting in workspace.
If you want some default selection in your reports all the time, you should use Grid POV instead of USer POV.
Thanks and Regrads,
Rahul

5200 : Error in executing query -- Hyperion Financial Reporting

Problem in accessing the Hyperion Financial Reports.User is having full access and able to access all the folders except one folder(Legal Folder reports). We are getting 5200: Error Executing the query error. Recently we have upgraded Hyperion to 11.1.1.3 version . Before upgrade user is not facing the problem. After Upgrade user is getting these errors while accessing the reports. we did research and found in "Error 5200: Error Executing Query" When Viewing Financial Reporting (FR) Reports". Is this error is relevant to the Information provided in Metalink and also can you please tell us is there any impact on doing the solution provided in the below. Why is this error is coming is any preferences needs to be changed.Please help us on this.
Error Description:
5200: Error executing query
Servername/ApplicationName/DatabaseName/Error(1007090) Unknown Member name [Current Point of view for years] in Outline Query
Doc ID 1107142.1:
Possible Cause 1:
If members have recently been added, moved, or deleted from the data source, Essbase, HFM, or Planning, the existing User POV records become out of sync.
The User Point of View record uses indexing to identify the member. If the index changes because of changes in the outline, the User Point of View record no longer points to the correct location in the outline.
To resolve the issue, you need to run the ManageUserPOV utility on a Windows server that has the Financial Reporting Reports Server, or in a Unix or Linux environment, has the Financial Reporting Print Server installed.
You will need to provide a BIPlus Global Administrator user ID and password to run the utility.
The utility will provide the correct syntax to run the command.
1. In \Hyperion\products\biplus\bin\ManageUserPOV.properties, specify the following parameters:
a. ReportServer
b. DatasourceUser
c. DatasourcePassword
d. User
e. Datasource (You can find the datasource in Workspace under Tools>Database Connection Manager in the Name column.)
2. From the command line, cd to Hyerion\products\biplus\bin
3. Type in "ManageUserPOV" without the quotes. The executable will read the parameters previously set in the ManageUserPOV.properties file.
Thanks,
Naresh.

Take a look at this: http://adistrategies.com/index.php?loc=knowledge1&item=291
Hope it helps.
Mehmet

Financial Reporting is compatible with Windows 7?

Hello everyone,
I am working with Hyperion Planning v.11.1.2 and Financial Reporting v.11.1.2.674 and I need to know if Financial Reporting is compatible with Windows 7, and where I can locate more information you may need about the technical requirements of Financial Reporting.
Regards

Have a look at the compatibility matrix :- http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
For 11.1.2 the FR Client looks to be supported on Windows 7
Cheers
John
http://john-goodwin.blogspot.com/

How to know a table column name in HTML (Hyperion Interactive Reporting).

Hello,
I have a Hyperion Interactive Reporting dashboard section with an embembed table section on it.
The dashboard it will be open only in HTML.
I put the table as Active, so i can interact with her.
So, what I need to know now is how can I know the column name or number when I double click in one cell of the table.
Can anyone help me with this?
Thank you in advance,
Carlos

Views don't have primary keys though their underlying tables might. You'd need to pick apart the view to determine where it's columns are coming from.
You can select the text of the view in question from user_views.

Error in Batching with Photoshop

I have always used Batches with no problem and then all of a sudden this error message started popping up and I can no longer batch.
(Could not complete the Batch command because the disk is not available.) Please HELP!

Ok, the animation can be found at http://www.mediafire.com/?2vebo3vrfnob15s this is just a quick animation before i start to construct an animated banner. My friend whos making the actual website is having trouble importing a .swf animation and it just appears as a blank box. He wants to attempt other formats to see if he has more luck and this whole project is more or less a learning experience for the both of us. Aside from changing formats .swf works fantastic with my movieclip symbols and id also like to understand why exactly my project wont animate when I try to use only graphics. Allot of questions I know but I really appreciate the help.

Hyperion Finacial Reports Schedule Batch with Mutliple POV and Datasources

Similar Messages

Maybe you are looking for