Hyperlink to current slide in html5 or restart current slide for buffer issues

Hello,
i am publishing to HTML5 and having good success except for one thing. everyone knows that buffering videos has always been a problem with this software. My workaround has been to create a "refresh video" button on each video slide that is a simple hyperlink to that same slide. Pushing the refresh video button would then restart that slide and the video buffer problem disappeared.
Now that I'm using html5 I've noticed that procedure doesn't work anymore. I can hyperlink to anywhere else in the presentation but I can't get that slide to restart using my old procedure. Anyone have any ideas for restarting a slide that is buffering in html5.
BTW, I tested my old procedure when published as SWF and it works that way, but not as HTML5
thank you

Hi Chris,
Try this out to solve your issue:
say slide1 is the slide where-in you want a button that takes to the start of slide1.
1. Have a dummy slide(say slide D) just before slide 1.
2. Have a button on slide 1 which would have "jum to slide" action and would take the user to slide D.
3. Have " jump to slide" action on the OnSlideEnter os slide D and jump to slide 1.
Do let me know if this helped you resolve the issue.
Manish
http://blogs.adobe.com/captivate

Similar Messages

Keynote, hyperlink to hidden slide problem

I'm currently making a keynote that on one picture has a hyperlink to a slide. When the keynote is finished I don't want the presentation to show the slides that my hyperlinks are referring to. But if I try to hide the slide the hyperlink is linked to, the hyperlink is disabled. Suggestions?!
Oliver

Hi,
You could try putting a couple of blank slides or a 'the end' slide immediately after your presentation and stopping the slideshow manually.
Alastair.

Need on-click routine to change font and hyperlink to new slide

Hi, I have created a slide that has multiple cells with text within a table. Is it possible that when a cell is clicked, the text within the button (table cell) can change and then hyperlink to another slide. I have the hyperlink working, but at a loss on how to control the text color during my slide show. Help please...
Otter102

Which title is this exactly? They all behave differently.

Captivate 5: how can I create a hyperlink within a slide that links to an internet site?

Hi.
I need to create a hyperlink on a slide in Captivate 5 that links to an internet site.
I cannot seem to locate this function on the menus in Captivate 5.
Can someone please give me the instructions on how to do this?
Thanks.
CB.

Hi there
It's unfortunate that you missed the links we tried to put where you would find them before you even posted. Because if you had read through them, it would have saved you from having to post your question as it is answered there.
Even though you missed the links, I'd heartily encourage you to read through them. Especially the Frequently Encountered Issues link, as it will also address some issues you will likely encounter with linking.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Slide to remain or standby until i clicked all the hyperlinks in that slide..???

im using adobe captivate 4. i have this slide with 3 click boxes.
1st click box- continue (for the whole slide)
2nd click box - go to url or file (use as hyperlink)
3rd click box - go to url or file (use as hyperlink)
i run it in swf file. when i click the 2nd click box, it goes to the corresponding location, the browser. then when i go back to my file(swf) and click the 3rd click box, the slide continue to the next slide.
my concern is i want the slide to remain or standby until i clicked all the hyperlinks in that slide..???
how can i do that?
help please,, thanks!!!

Hi there
Try editing the Click Box. Look to the immediate right of where you typed the URL. Click the button with the down arrow. I'm guessing you have already done this. You choose New to coax the link to open in a new window.
What you probably missed was that you need to click the button a second time. Then clear the option "Continue Playing Project".
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Hyperlinks to hidden slides

need to know if its possible to hide slides so they are not viewable unless accessed via a hyperlink on another slide.....
how would i go about doing this in keynote '09
PS i am a noob

Do you just need them to be hidden during the slideshow? If so there are two options.
First you could just make a separate slideshow with the hidden slides. Hyperlink the main slideshow to the hidden slideshow and the hidden slideshow back to the main slideshow. If you do this, you will want to make sure both slideshows are open before starting to have the most seamless transition.
The second option would be to have the hidden slides as the first slides in the slideshow. Say you have 5 you want hidden, they would be slides 1, 2, 3, 4 and 5. You would start your slideshow on slide 6. Then you could either add hyperlinks to the first 5 slides, or use the slide chooser while presenting to move to them and back.

(solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer

(solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer
Hetti Arachchige V Aravinda | Network Administrator (B.Sc, MCP, MCTS, MCSA, MCSE, MCITP, CCNA, CEH, MBCS)| http://www.windowstechinfo.com |

Hi,
Glad to see your problem resolved, Hope your experience is helpful with others.
Roger Lu
TechNet Community Support

Windows update cannot currently check for updates

dears
when I Try to update my windows 7 by clicking on windows update ( control panel or windows update) I get some notification saying
"windows update cannot currently check for updates because of the service is not running you may need to restart the computer"
I have tried with 2 solution in internet found but not successeded as below :
1) stop windows update service and rename " SoftwareDistribution" folder in order to be created later after restart aformentioned service" and some solution as for stop "Background Intelligent Transfer Service" before windows
update service even though didnt pass.
2) run windows update troubleshooter to idnetify the problems and fix the issue , it tells me its fixed but nothing there.
I need your support please if somebody encounter that to let me run my windows Update for more information its colored with red.
Ali Hadawe

Hi ,
First of all ,I would you suggest to check the status of the "Windows update "services " and "Background Intelligent Transfer service".Run "Services.msc" to open the services manager.
Someone has tried the following methods to resolve the similar issue,please have a try :
1.go into Windows Update and change the settings to "Never check for updates (not recommended)", click OK, and then change it back to "Install updates automatically".
2.Turn on the Windows Defender and update it .
Here is a link for reference :
windows update cannot currently check for updates because the service is not running window 7 HELP(pay attention to Brook and Gab_Power`s answers)
https://social.technet.microsoft.com/Forums/en-US/ee85d867-ce2f-412f-8c03-f43ab92132cc/windows-update-cannot-currently-check-for-updates-because-the-service-is-not-running-window-7-help?forum=w7itproinstall
If the issue persists, please run the fix it tool in the following link to reset the windows update components to have a check .
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058
Best regards

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

Yes, use hyperlinks.

3.6.26 is working on my OSX 10.4.11 PPC, but it keeps asking me to download the most current version for my system... why?

I've dowloaded and updated 3.6.26, which Firefox stated was the most current version, but when I restart the browser, it then states I'm NOT running the most current version for my system... why?
I'm running a Mac PPC G4 10.4.11 Thanks for any assistance you can provide :)

Thanks for the Reply Alice... :) The message is when I restart Firefox, which activates the update, and the 'thanks' page on Firefox's site (not Google)... So, I'm curious why it gives me my most current update, then tells me that there might be a more current version for my system... very strange! Anyway, I'm definitely sticking with 3.6.26, unless I get info that suggests there's a .27 or .28 flying around that may be useful... I will definitely NOT go to 9 or 10.... :)

"Onsite Next Business Day Warranty" - Current Warranty Request/Warranty Issues/Poor Service

TL;DR at the bottom of the post, detailed information in between. I have had a T430s for a little less than three years. I have called the warranty/customer service ~5+ times and every time gotten extremely poor service, whether it be because parts were "backordered" for weeks at a time, or because "Next Business Day" service has been anything but. I have decided to take a different route for my most recent warranty request, I will keep an up to date account of my request via this forum, with the intent of informing as many as possible with the current state of "Onsite Next Business Day Warranty". I called the warranty ~1hr ago and filed a service request. The outcome of the request was that "I should receive a call in the next day or so, no later than 5:30PM tomorrow" when the employee I spoke with arrives in the office. I pressed as to who would call, the employee would not answer definitively, but hinted that it would be his manager, because my warranty request apparently contained "so many parts that it required approval". The parts have not been shipped, and it was abundantly clear that the subject of the call would be whether this warranty request would get approved. Hopefully, readers can already tell where this is going, next business day onsite repair apparently means in the next 24 hours, you will receive a phone call letting you know if Lenovo will honor their warranty obligations that have already been paid for. To detail my issues:1. The fingerprint scanner has stopped working for the second time. 2. I have had an issue where when I pick up the laptop on the lefthand side, the screen turns to 'snow' and will not return to its regular condition until next boot. The laptop is unusable in this condition. I have been attempting to get this fixed essentially since I purchased the laptop, however, after 3 technicians came to 'fix' the issue, it has not been solved. I have asked/suggested every time I have called the warranty line that the issue is the system board, and it needs to be replaced. Every time, they have refused to replace the system board, instead opting for other parts, some of which were on 'backorder' for over a month (remember, "Next Business Day Onsite Repair"). The difficulty in obtaining warranty service from Lenovo has caused me to only attempt to get this fixed when other issues pop up, as they have in this case. Frankly, this issue alone should have caused Lenovo to call this laptop what it is after warranty request #2, a lemon, and they should have/should send a replacement model. 3. The laptop will not 'awake' from sleep mode - when the lid is closed, the keyboard/power button will not respond, and all power sources (battery, charger cable) must be removed and the laptop restarted. 4. When the laptop is booted up, there is a 'CMOS' error message - I have never had a BIOS battery 'go' in this short a time frame. Issues 1,3, and 4 have cropped up in the last week. The warranty employee suggested that I might need to send my laptop in for 'Depot' repair instead of onsite, which in this instance will not work because of the significant delay that may entail. I have a professional licensing/certification exam this month, and would greatly prefer that my laptop be in tip-top shape for the exam. The need to have the greatest level of uptime is what caused me to pay for the NBD Onsite Warranty in the first place. My previous (horrible) warranty experiences and requirement for expedient repair have led me to seek a better method for resolving issues, namely airing them in a public forum, which hopefully will elicit a response from someone who can actually get things done in the warranty department. I have 0 hope of receiving next business day repair (or even repair by Friday, as the warranty explictly says calls received after 4:00 PM might take 2 business days). I am skeptical that the issue will be resolved in the next week or two. Likewise, I have little hope that [some of] the problem(s) will actually get resolved after "repair" has been made, as historically that has not been the case for me with this laptop. I will be voting with my dollars after this, as I have been uniformly unimpressed with Lenovo customer service/warranty/etc. The laptop has been very nice when it doesn't have issues (and when I don't forget to grab it in a certain way), however, everything else about Lenovo has been exceedingly frustrating. The TL;DR of this is:1. If you work for Lenovo and can help, or if you don't and can help, please do!!! I will be extremely grateful for any assistance. 2. DO NOT under any circumstances purchase the Onsite NBD warranty thinking that the warranty will live up to the title. I have never received NBD Onsite warranty service, despite repeatedly 'giving' the option to Lenovo to provide such service. 3. If you are considering purchasing a Lenovo product, please read some of the stories people have on their dealings with the support side of the business. I will speak for myself and say that I will almost certainly never buy another Lenovo product again, and will strongly encourage everyone I know to do the same - after recounting my issues with them.

Hey burgerbone,
Sorry to hear about your troubles getting your machine issues resolved. I am not sure of the onsite policy related to your symptoms but I will be happy to look into it for you.
Do you mind sending me a PM (Private Message) with your machine/case info?
Thanks!
Ty

Slide for Emergency - Stuck on Lock Screen

Recently on my new iPhone 6, I noticed that the battery percentage was not going down with the use of my device. I held the lock button to power off, and I turned the phone back on. When I saw the lock screen, the time was not being displayed and the "Slide to Unlock" prompt was changed to the "Slide for Emergency" prompt. After sliding to input my passcode before Touch ID could work, my passcode would not allow me to access my phone and instead, my phone vibrated once and sent me back to the slide to unlock screen. These screens seem to be very glitchy, often times not responding to wake button presses or home button presses. The screen will also often go black for no reason. My device is running iOS 8.1.2 without any jailbreaks. I've already tried turning it off and back on, and holding the lock and home buttons at the same time.
Any help would be appreciated

Try the following testing after each step
- Reset the device. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Updated 4.0, stuck on "slide for emergency"

Everything updated pretty quick, and I went to turn it on and now I get this "slide for emergency" message, anyone know what to do?
iTunes won't recognize it, I get this error message:
"iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)."
So I can't restore to the backup I did before I updated.
Tried restarting iTunes. And no this isn't a jailbroke phone. It's straight from Apple/AT&T.
I've tried restarting the phone by holding both home button and power button. Still frozen.
Please help!
Message was edited by: telle926
Message was edited by: telle926

To put the iPhone into DFU or recovery mode:
1. Connect your iPhone to your PC.
2. Open the iTunes application.
3. Hold down the top button on your iPhone and the circle home button at the same time for at least 10 seconds.
4. After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes"
5. Just click OK. Your iPhone screen will be black as well.

Is it possible to view your current history for a single tab in safari lion

Is it possible to view your current history for a single tab in safari lion?

Not once the tab has been closed. If it hasn't, clicking and holding the Back button will display the titles of recently visited sites in that tab.
(68280)

Historic and Current data for Master data bearing objects

Hi All,
We are trying to implement type 2 dimensions for all the master data bearing characteristics, where we require historic and current data available for reporting. the master data can have a number of attributes and all of them can be time dependent. We are not getting any 'datefrom' or 'dateto' from the source system.
For example:
For Example: The table below shows data entering BI at different dates.
Source Data day of entering BI
MasterID ATTR1 ATTR2
123506 Y REWAR day1
123506 N REWAR day4
123506 Y ADJUST day4
123506 N ADJUST dayn
The field 'day of entry into BI' is only for your understanding; we do not get any date fields from the source. SID is the field we are generating for uniqueness. It is a counter. EFF_DATE would be the current date for all the data. EXP_DATE would be 31.12.9999 until the attributes change. SID and MasterID together would be the key.
On day 1 the following data enters BI,
day 1
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 12/31/9999
On day 4, 2 data records enter with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
2 123506 N REWAR 2/13/2009 12/31/9999
3 123506 Y ADJUST 2/13/2009 12/31/9999
the EXP_DATE of the record of day 1 needs to be changed to current date.
Also there are two records entering, so latest record would have EXP_DATE as 31.12.9999. And the EXP_DATE of the first record on day 4 should change to the current date.
so the following changes should happen,
CHANGE
SID MasterIDATTR1 ATTR2 EFF_DATE EXP_DATE
1 123506 Y REWAR 2/10/2009 2/13/2009
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
On day n, one data record enters with same PID,
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
4 123506 N ADJUST 2/22/2009 12/31/9999
The change is ,
CHANGE
SID MasterID ATTR1 ATTR2 EFF_DATE EXP_DATE
3 123506 Y ADJUST 2/13/2009 2/22/2009
The data expected in P-table is as below, on Day n or after Day n, untill any other record enters for this MasterID,
1 123506 Y REWAR 2/10/2009 2/13/2009
2 123506 N REWAR 2/13/2009 2/13/2009
3 123506 Y ADJUST 2/13/2009 2/22/2009
4 123506 N ADJUST 2/22/2009 12/31/9999
Has anyone worked on type 2 dimensions earlier? Or any ideas to implement this logic would be appreciated.
Regards,
Sudeepti

Compound the Master ID with eff date and other attribute as superior objects
so you will get P-table as
ATTR1 ATTR2 MAT ID
1 2/10/2009 2/13/2009 123506 Y REWAR
2 2/13/2009 2/13/2009 123506 N REWAR
3 2/13/2009 2/22/2009 123506 Y ADJUST
4 2/22/2009 12/31/9999 123506 N ADJUST

Hyperlink to current slide in html5 or restart current slide for buffer issues

Similar Messages

Maybe you are looking for