I:0#.w|domain\user showing in report

I am creating a report in SQL Report Builder 3.0 and I have 2 colums that will populate a user field. I am getting the format of i:0#.w|domain\user instead of just a username. How can I fix this in report builder?

Hi Jim_JNCIP,
According to your description, you have a field/parameter which the format is "domain\user", now you want to cut out the user only. Right?
In this scenario, we can use Instr() function to get the index of "/" first, then use Right() function to get substring. Please try the expression below:
=Right(Fields!User.Value, Len(Fields!User.Value) - InStr(Fields!User.Value, "\"))
Reference:
Expression Examples (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Similar Messages

Non Domain User Access to Report Server

HI Team,
I am Back with another question. These days i am working on SSRS web services as a part of that i need to provide user access to non domain users to the report manager which is residing in a virtual machine and also when i use the report service web service
URL it is asking for virtual machine's windows credentials and as per my client's requirement i should not be prompted with VM'S windows credentials.
Also, we are providing end users with a login page and this login page is connected to a separate User's database in the VM and how to register these non domain users in the report server database
and also reort manager. please help me out of this issue.
Thank you.

Hi NB515,
In Reporting Services, if we connect to Report Manager out of domain, then we need provide a domain username and password can we access to it. If you want to skip this step, you can configure anonymous access for the report server. However,anonymous access
is not recommended as it may give direct access to your report server or report projects to any one who know the URL of your Reporting Services. But in case you still want to try it, you can refer to the link below to see it:
http://blog.quasarinc.com/ssrs/sql-server-reporting-services-2012-anonymous-access/
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Domain users and local users can't login to reporting service web environment

Hello,
We installed reporting services at one of our customers but aren't able to use domain users to login. We've tried to login with a domain user, a local user but both aren't working. We set the proper permissions for the users on the reports folders.
We can only login with the buildin/administrator account on the local url: http://servername/reports
How can we allow login with domain users on other report manager url's?

Below link may be helpful,
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/623da309-21fa-42a8-905f-1424144a347d/setting-up-a-user-in-ssrs?forum=sqlreportingservices
Regards, RSingh

Domain user network share browsing slow, but domain admin is fast

I've seen quite a few threads about slow network share browsing in Windows 7, and I've tried every fix to no avail. I did notice something that has not been mentioned in any threads that I've seen though, and that's the behavior is different when using
a user account with administrative privileges.
Environment: SBS2011, domain, 14 Windows 7 PC's that all exhibit the same behavior
As an account in the domain users group, browse to a network share with approx. 400 items to display, and it takes 4-5 seconds for explorer to show them. Same delay exists when creating new folders in this folder. Displaying this folder in any
way reproduces this delay, whether navigating up or down the file system, or by going straight to the share's UNC path.
Folders with fewer items have less of a delay, the effect seems proportional.
As an account in the domain admins group, navigation is lickety split. Tested with two different administrative accounts. Tested on multiple PC's. Also took a user account that exhibited the issue, added them as a member of domain admins,
and this resolved the issue for that user account.
Any ideas?

Did you ever find a solution to this issue?
We are running into a similar issue. We have a few specific Domain Users who are reporting difficulty navigating or searching network shares. Searching a small folder of files is taking 30+ seconds. All of our domain admins can search the
same folder instantly. If we add this Domain User into Domain Admins his searching is instant, when we demote him back down to Domain user its slow again. The Domain User is having the same issue no matter what computer he uses. Us Domain
Admins can log into the same computer and it comes up with search results instantly, log out and log back in as the Domain User and suddenly its slow again.
Any help would be appreciated.

Reporting Services - Content Manager shows all reports for all domain users even without permissions

I have installed
reporting services 2008 in: Site
Settings option / Security only 3 users
have added:
BUILTIN \ Administrators
System Manager
MYDOMAIN \ user1
System Manager, System User
MYDOMAIN \ user2
System Manager, System User
I have the same settings in the "start
up" folder and inside the folder
where are my reports, however if I authenticate
any user with different domain
to user1 and user2 can see all content
of the report manager can even
manage it.
Help me, greetings
Jenny

however if I
authenticate any user with
different domain to user1 and user2 can see
all content of the report manager can
even manage it.
Hello,
Did you means that other domain user account (Other-Domain\user3) can access reports on the Report Manager without grant any permission? As per my understanding, it is not possible. SQL Server Reporting Services uses Windows Authentication
defaultly to determine who can perform operations and access items on a report server.
Based on your description, you grant the local Administrators group and two domain users with system-level role: System Administrator.  System-level role assignments grant access to global tasks and permissions that apply to a report
server site, That's may cause the user can access and manage all contents on the Report Manager.
If you want to set permissions for accessing conntents on Report Manager, you can just specify itme-level role assignments.For example, if you grant user with Browser role on a report, the user can view report and report properties, but cannot edit
report properties.
Reference:
Lesson 1: Setting System-Level Permissions on a Report Server
Lesson 2: Setting Item-Level Permissions on a Report Server
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

How to show full name of user in crystal report

Hi. I am using Crystal Report 2008. I need to show full name (first name and last name) of the user logged in. Currently I am using "currentceusername" but it shows the user id that a user uses to login.
Is there any way to show the full name of the user in crystal report?
Thanks in advance.

Hello,
Not you H4... Can I suggest if someone replies to actually add something of value!!!!
Cr does not have the ability to query your AD Server. What you would have to do is use a AD query tool or Export Option and export the user info from the log on ID into a Excel or an Access table or something CR could report off of. Then you can add a subreport to get the name from the ID and insert it into the main report.
Check with your IT department, they should have tools to get the info. I'm not sure if there is a DB connector that would allow you to query the AD server directly but if there is one and it supports ODBC then you can use that as your subreport Data connection.
Typically names do not change that often so rather than running the Query every time the report is generated it would be better to export the info to a text type file and simply use it for your report. IT can put a rule on to export if the Names change.
Thank you
Don

Accessing SSRS report for Domain Users

Hello,
I have created the SSRS report and deployed it on report server. I would like to add browsing credential to all the users in the User Domain. so i have added the domain name on report server but even domain users are not able to access these report.
Please help me to resolve this issue.

what error they are receiving while browing the reports?
Hope you have provided the permissions on the reports as mentioned in below links:
http://technet.microsoft.com/en-us/library/ms157363(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/aa337471(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/aa337385(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/aa337494(v=sql.105).aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Outlook 2013 people pane is not showing any items for internal domain users. External contacts works fine

I have recently purchase a new PC which has Windows 8.1, and Outlook 2013, connected to an exchange 2010 SP3 RU4 server.
In the People pane, the for External clients, then this box populates correctly, but for internal domain users, it shows "There are no items to show in this view"
On my OLD PC using XP, and Outlook 2010, connected to the SAME account, then people pane shows correctly for all users.
Any help appreciated
regards
Chris

Hi Chris,
I have checked in my Windows 8 and Outlook 2013 with Exchange 2010 SP3 RU4 environment. There are three folders listed under My Contact in my People pane:
Contacts: The contacts which we added and saved
manually before.
Lync Contacts: The contacts we added in Lync.
Suggested contacts folder: Automatically
keeps track of everyone you send a message to, but isn’t in your Outlook contacts. Please note that it is different from Auto-Complete List.
Therefore, I suppose that the meaning of “but for internal domain users, it shows ‘There are no items to show in this view’ ” is that there is no contacts in the
Contacts folder. Is it right? If I misunderstand, please point it out. And we need to add and save users manually in this folder.
Thanks,
Winnie Liang
TechNet Community Support

SQLServer Reporting Services 2005 Prompts for Credentials for a trusted domain user

Currently the report is running in the domain AAA. Users in the domain AAA are using the report.
Another new domain BBB and an user XXX is now created and BBB\XXX has been given Browser access. Domain AAA and BBB are trusted domains.
After this when the user BBB\XXX logs in and access the report, before loading the report, credentials dialog is prompted, once credentials of BBB\XXX is entered, the report is loaded.
Why the report prompts for this additional credential dialog for the trusted domain user?

Hello,
Did you have get two textboxes in the report parameter panel (in the left side of the "View Report" button)? The issue is occurred when the credential of the datasource is configured with “Prompt for credentials”. Please check if you configured the credential
with "Stored Credential" of the datasource.
Please refer to the following thread to configure the credential.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/1564cd7a-6b7a-40f1-9f98-5c766ebfc63e/datasource-userid-and-password-being-asked-eachtime-when-report-is-generated?forum=sqlreportingservices
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Unable to browse internet on a domain user's computer through ASA 5503 Firewall

Dear All,
I am trying to configure my new firewall for the last one month but still unable to fix it. I have a domain in windows 2012 standard edition and the firewall with unlimited license. Here is the output of show startup-config. Please note that prpgb.org is my local domain.
prpgbasa# show startup-config
: Saved
: Written by enable_15 at 02:50:45.169 PKT Thu Nov 20 2014
ASA Version 8.2(5)
hostname prpgbasa
domain-name prpgb.org
enable password AExqpLntfuzsVQrq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.0.0.0
interface Vlan2
nameif outside
security-level 0
ip address 202.142.XXX.YY 255.255.255.252
ftp mode passive
clock timezone PKT 5
dns server-group DefaultDNS
domain-name prpgb.org
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 202.142.XXX.YZ 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.0.0.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 10.0.0.2 255.0.0.0
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
dhcpd lease 86400 interface inside
dhcpd domain prpgb.org interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:23c0af4b2ddf9e925f83ce13909ab900
prpgbasa#
You all are requested to have a look into the problem and suggest me the modifications.
Thanks

Dear All,
I have solved the issue. I have done the following in-order to browse internet on domain user computers. Here are the steps
1. I have disabled my internal DHCP server in the domain.
2. Then I have configured the ASA DHCP server in the default IP address scheme i.e. 192.168.1.100-200
3. I have Connected my ASA to a switch first then from there I connected a cable to my Domain's Server WAN interface. The LAN (192.168.1.2)interface of the Domain server is also plugged into the same switch.
4. I am using my Domain Server's DNS for name resolution and forward queries which are not served by my domain to open dns server.
It works perfectly so far but before applying or setting up the entire netowrk i want your help to look into the configuration file for corrections if i am making any mistakes. Thanks again for your help and here is the output of show confing.
prpgbasa# show startup
: Saved
: Written by Ghaffar at 02:11:24.319 PKT Mon Dec 8 2014
ASA Version 8.2(5)
hostname prpgbasa
domain-name prpgb.org
enable password AExqpLntfuzsVQrq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ddns update hostname PRPGB.ORG
dhcp client update dns server both
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 202.142.XXX.YY 255.255.255.252
ftp mode passive
clock timezone PKT 5
dns domain-lookup inside
dns server-group DefaultDNS
name-server 192.168.1.2
domain-name prpgb.org
object-group network obj_any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 202.142.XXX.YY 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication enable console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.100-192.168.1.200 inside
dhcpd dns 192.168.1.2 interface inside
dhcpd lease 86400 interface inside
dhcpd domain prpgb.org interface inside
dhcpd update dns both interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username ABC password FL01QCj0LaLWTID0 encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:7c4930a079158c0cb10a42813d3690cd
prpgbasa#
Please suggest me if there are any recomendations.
Thanks in advance.
Ghaffar

SQL 2012 sp2 "The permissions granted to user 'DOMAIN\user' are insufficient ..."

1st let me set the tone by admitting I am not real familiar with SQL, I'm more of an Operations Admin. So this is not a new question I think, although I am having difficulty finding an applicable solution. Using SQL Server 2012 sp2 on a Windows
2012R2 server. This is configured to be a SCOM DB server; while on the SQL server itself I open IE and attempt to go to the following URL http://scomsql/reportserver_SCOM I get the
following error.
Reporting Services Error
The permissions granted to user 'DOMAIN\user' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
SQL Server Reporting Services
I have looked at the Reporting Services Config. Mgr. and it looks like the Report Mgt. URL is set for port 80 and no SSL is configured. The rsreportserver.config file has the SecureConnectionLevel set to "0"
My domain account is listed under Security\Logins and holds the 'Server Roles' of public and sysadmin, 'User Mapping' is DBO for the 'ReportServer$SCOM' and 'ReportServer$SCOMTempDB' and the role membership shows db_owner and public for these as well.
Any assistance with getting this working would be greatly appreciated.
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

Hi Wasisname,
The Reporting Services error rsAccessedDenied occurs when a user does not have permission to perform an action. To troubleshooting this issue, please make sure that you have sufficient permission and the report server name is correct.
In fact, reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. On a new installation, only local administrators have access to a report server. In order
to grant access to visit the URL http://server:port/ReportServer to users, a local administrator must create a role assignment to define the tasks a user can perform. To solve this problem, please refer to the
following steps:
Start Report Manager by going to URL
http://scomsql/reportserver_SCOM.
Click Site Settings at the top right of the page.
Click Security in the left pane.
If a role assignment already exists for the user, click Edit.
Otherwise, click New Role Assignment. In user, enter the user account.
Select appropriate access, and then click Apply.
The issue may be caused by the UAC or Internet Explorer security setting, please try to follow this steps:
1. Open the Internet options of the IE and add the report server URL into trusted site in the Security tab.
2. Run the IE as administrator.
Besides, if the user need to have access to reports, folders, models and shared data sources, we can assign Item-level roles on the root node (the Home folder) or on specific folders or items.
For more information about Configuring a Native Mode Report Server for Local Administration, please refer to the following document:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Browser window closing without showing MSS report

Under MSS user clicks on a report name in the portal bowser, it opens up a new pop-up window which closes out immedietly with another small pop-up coming up for " closing the session" and closing.
The case is same for all reports except one report(Attendance) in which it shows the report data.
This is an IAC iview that launches the "HRWPC_FC_EXEC" Internet Application Component.
Anybody can help ??

Hi Ram Gopal,
Is ur problem got resolved..?
Please let me know the solution if it is resolved. Me too facing the same issue.
I observed that if the data is not there for that report, system closes the window.
Regds,
Bharghav.K

Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

Hi,
I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines.
First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
Here are my exact steps of what I did to reproduce our problem:
Complete format of HDD in preperation for a clean install
Clean install performed
Set up the machine initially with a local account
Test metro apps - all working fine
Open control panel from the desktop, click on System, change the system to join the domain, click reboot
Log into the system using my domain account
Test metro apps - all working fine
Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
I click add and then add my domain account - also giving it administrator access
Sign off or reboot to ensure the new security is applied
Sign back in to the domain account
Test metro - ALL BROKEN
Sign out
Sign in as local account
Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
could fathom was a full re install and not giving the domain user admin access to the local machine.
Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
Thanks

Hi Juke,
Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
in event viewer.
Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
Under "Applications And Services Logs" --> "Microsoft" --> "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
Windows.Launch contract failed with error: The app didn't start."
If you require any further information just let me know and I will provide as much as I can.
Thanks

Domain name showing instead of DisplayName (DN Error)

Hi
For a portion of our users, myself included the Domain\UserName shows in sharepoint but for the majority of users it shows the display name fine.
I've done a full user profile synch today and also restarted the Forefront Identity Manager Service & Synch but it's still nto fixed.
The weird thing is from seeing other people's problems they generally have everyone with domain name but it's a mixture here on my farm.
Here's the error from the Application log;
The extensible extension returned an unsupported error.
The stack trace is:
"System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.InvalidOperationException: More than one DN specified for the same profile.
   at Microsoft.Office.Server.UserProfiles.ProfileImportExportService.UpdateWithProfileChangeData(Int64 importExportId, ProfileChangeData[] profileChangeData)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.Office.Server.WebServiceDirectProxy.WebMethodInfo.Invoke(Object webServiceInstance, Object[] args)
   at Microsoft.Office.Server.WebServiceDirectProxy.Invoke(String methodName, Object[] args)
   at Microsoft.Office.Server.UserProfiles.ManagementAgent.ProfileImportExportDirect.UpdateWithProfileChangeData(Int64 importExportId, ProfileChangeData[] profileChangeData)
   at Microsoft.Office.Server.UserProfiles.ManagementAgent.ProfileImportExportExtension.Microsoft.MetadirectoryServices.IMAExtensibleCallExport.ExportEntry(ModificationType modificationType, String[] changedAttributes, CSEntry csentry)
Forefront Identity Manager 4.0.2450.47"

Right now got the service running again, but the following powershell error - can anyone explain please? Can i just paste a powershell command in and it work?? Firstly go the UP GUID from Get-SPServiceInstance and then tried to run
$upsa = Get-SPServiceApplication –Id 0e2c7f6c-d9f8-43a3-9f56-427f681d5866 $upsa.NetBIOSDomainNamesEnabled=1
$upsa.Update()
But I get....
PS C:\Users\sharepoint> $upsa = Get-SPServiceApplication -Id 0e2c7f6c-d9f
8-43a3-9f56-427f681d5866 $upsa.NetBIOSDomainNamesEnabled=1
Get-SPServiceApplication : A positional parameter cannot be found that accepts
argument '$null'.
At line:1 char:33
+ $upsa = Get-SPServiceApplication <<<< -Id 0e2c7f6c-d9f8-43a3-9f56-427f681d58
66 $upsa.NetBIOSDomainNamesEnabled=1
    + CategoryInfo          : InvalidArgument: (:) [Get-SPServiceApplication],
    ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.SharePoint
   .PowerShell.SPCmdletGetServiceApplication
PS C:\Users\sharepoint> $upsa.Update()
You cannot call a method on a null-valued expression.
At line:1 char:13
+ $upsa.Update <<<< ()
    + CategoryInfo          : InvalidOperation: (Update:String) [], RuntimeExc
   eption
    + FullyQualifiedErrorId : InvokeMethodOnNull

I:0#.w|domain\user showing in report

Similar Messages

Maybe you are looking for