I always have an error when I test the WSC program

I have installed the tuxedo 6.5. and test the simpcl sample program. after finished "buildclient -f simpcl.c -o simpcl -w",
and run it ,it report the "system internal error" message.
The enviroment variable "WSNADDR" has been set,and the ubbconfig file is modified for the WSC model.
who can help to solve this problem?

you should type this:
buildclient -w -o simpcl -f simpcl.c
"jonson" <[email protected]> wrote:
>
I have installed the tuxedo 6.5. and test the simpcl sample program. after finished "buildclient -f simpcl.c -o simpcl -w",
and run it ,it report the "system internal error" message.
The enviroment variable "WSNADDR" has been set,and the ubbconfig file is modified for the WSC model.
who can help to solve this problem?

Similar Messages

  • A network error when i tested the connection of a proxy user

    Good evening
    I 'd created a 3 appliances Filer system . Filer 1.1.0.653
    The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
    Every thing seems well. I could inport AD users, create filr users, and work ...
    But when i want to create a NetFolder server, impossible to pass the connection test
    Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
    or
    Name : Administrateur
    or
    Name = arcdom\Administrateur
    Click on test connection => an network error occurs
    I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
    The Novell-FAMT is running. (I tried to restart it without succes)
    Help .......
    LP Irovetz

    Originally Posted by LPIROVETZ
    Good evening
    I 'd created a 3 appliances Filer system . Filer 1.1.0.653
    The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
    Every thing seems well. I could inport AD users, create filr users, and work ...
    But when i want to create a NetFolder server, impossible to pass the connection test
    Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
    or
    Name : Administrateur
    or
    Name = arcdom\Administrateur
    Click on test connection => an network error occurs
    I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
    The Novell-FAMT is running. (I tried to restart it without succes)
    Help .......
    LP Irovetz
    From the docu:
    Click the Authentication tab, then specify the following information:
    Proxy name and password: Specify the fully qualified, comma-delimited name and password for the proxy user used to access the OES, NetWare or Windows, server. (You can use the Browse icon next to the Proxy field to browse the LDAP directory for the proxy user that you want to use.)
    IMPORTANT:Before you specify a proxy name and password for the Net Folder server, ensure that you review the information in Section 8.1.2, Planning the Net Folder Server Proxy User.
    Test connection: Click this button to ensure that the path is accurate and that the credentials are valid, then click OK after the test succeeds.
    Sometimes proxy users with the incorrect context pass this test. Ensure that the context for your proxy user is correct, as described in Expected Name Format for File Servers.
    Authentication type: Select the authentication service for the file server that you are connecting to. This option corresponds with the Server type setting that you selected on the Configuration tab. If you selected OES or NetWare as the server type, only Novell NMAS is available as the authentication type. If you selected Windows as the server type, you can select either Kerberos, NTLM, or Auto detect as the authentication type. (Auto detect means that it tries authenticating with Kerberos first, and if that fails, authenticates with NTLM.)
    NOTE:If Kerberos is selected as the authentication type, ensure that the DNS name server is able to resolve DNS queries for the Active Directory domains.
    If the Kerberos port (port 88) is disabled on the Windows server, select NTLM as the authentication type.
    So you should use comma delimited name for the username... Did you also try browsing for the user using the icon there?
    Does is log any specific error message in /opt/novell/filr/apache-tomcat/logs/appserver.log file when you try to test the connection?
    Thomas

  • I have compiler error when i run the ant script

    Hi
    Iam a beginner working with ant...When I run the script I get the following error...let me know if you have any suggestions....
    build:
    [javac] Compiling 28 source files to C:\finaltrial\classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] Compiling 186 source files to C:\finaltrial\classes
    [javac] error: error reading C:\finaltrial\classes\trial\impl\ru
    ntime\AbstractUnmarshallingEventHandlerImpl.class; error in opening zip file
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 1 error
    Thanks in advance..

    that's not an error, it's a warning.
    See the documentation on what causes that warning, it'll be an eye opener about the new language features introduced something like 2 years ago.

  • IPhone Calendar Events ALWAYS have sound even when event on the Mac does not.  How do I turn sound OFF on these events?

    I make a new event, I set the Alert = Message (NOT "message with sound").  When event happens on the iMac there is no sound.  Same event, syched to the iPhone, has sound.
    I have deleted events, recreated, synched.  Absolutly certain Alert is "message only."  No change in behavior.
    I have checked all preferences. iCal is set to automatically add an alert but I make sure I add the alert myself without sound.
    I just found the iPhone settings/sounds/calendar.alerts and I set this to "vibrate only."  I assume this will shut off the sound on ALL calendar alerts.  That's not really what I want to do (I want sound on some events, just not on every event) but if that's the only option available I'll take it.
    Can I get the iPhone to do what I tell it to do instead of overriding my settings?

    If it is not in Airplane mode then look here:
    http://support.apple.com/kb/TS1692

  • Always have Permission Errors running Apple Disk Utility

    I always have Permissions errors when running Apple Disk Utility. Even after a clean install (and restore of User prefs using Time Capsule).
    Most of the errors are "Repaired" but are still there if I "Repair Permissions" immediately again.
    Is this a problem that I can just ignore of should I try and rid my system of them?
    For example:   
    Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/pl.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/pl.lproj/UIAgent.nib”
    The above error will still be there if I re-repair.

    You can just ignore them all.

  • I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    May depend on which version of iPhoto you have installed.
    Check out this thread >   https://discussions.apple.com/message/15324917#15324917

  • I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection    refused'. Can any one suggest a solution

    I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection    refused'. Can any one suggest a solution

    Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our  mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

  • I always get an ERROR when I import avi videos in After Effects !!

    Hi There
    As I said in the title ,,
    I always get an error when I import an (avi) video into After Effects CS5.5 ,,
    and I don't Know why ,
    in other hand I can open the same video I imported it in many media programs like : Windows Media Player-Quike Time-Windows Media Center- Real Player ,, except After Effect !
    Although the same Program I used before Formatting the computer ,, but after Formatting the Projects file for Adobe After Effect didn't Open as well !!
    The Picture I attached shows the Error ,,
    Note:
    the question marks in the pictures are for the Arabic name of the avi video ,,and this version of Adobe After Effect CS5.5 is trail ,,
    I hope to find a solution for my problem ,,
    and I'll Be Thankful

    It worked , both what you said worked ,,
    First I placed them on the desktop ,
    Second I changed the names of the videos ,,
    and both of them worked ,,
    thanks a lot for your help ,
    Mr. TimeRemapper & Mr. Mylenium
    have a good day

  • HT201210 my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod

    my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod.

    You can try putting the iPod into DFU mode and see if that will let you restore and remove the jailbreak:
    http://www.iclarified.com/entry/index.php?enid=1034
    Some jailbreaks cannot be removed and in some cases will permanently disable your iPod. If that happens to you, then you will have to buy a new iPod; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPod.
    You're on your own from here. We can provide no further help with a jailbroken iPod in these forums.
    Good luck.

  • I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.

    I have compiled a program for a target after I added a new vi from NI_AALPro.lvlib. The addition worked fine on my development computer but gave me errors when run on the target.
    The box displayed:
    Missing subVI NI_AALBase.lvlib:1D Linear Evaluation.vi in VI NI_PtbyPt.lvlib:Linear Fit PtbyPt.vi
    Missing subVI NI_AALPro.lvlib:MSE.vi in VI NIPtbtPt.lvlib:Linear Fit PtbyPt.vi
    What do I need to do to bring the correct library into the transportable code?

    Hello,
    I was unable to reproduce the behavior that you saw.  I was able to deploy my application with the Linear Fit PtByPt without issues.
    Could you attach the smallest piece of code that reproduces this behavior so that I can test it as well?
    Justin Parker
    National Instruments
    Product Support Engineer

  • Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

    Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

    Hi, Tom.
    FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
    1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
    2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
    3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
    • My my "Multiple applications quit unexpectedly or fail to launch" FAQ
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]-

    Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

    Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

  • I always have this message when I install itunes

    I can't install itunes, I always have this error message:
    I have already tried to uninstall all apple softwtare and then install itnues again but it shows me always the same message!
    Please help! I can't do anything with my iTouch :'(

    gilsan1 wrote:
    Every time I sync my iPhone using iTunes or mobileme tries to update I get this message on my desktop screen:
    The application AddressBookSync quit unexpectedly.
    Mac OS X and other application are not affected.
    Some please help!
    Did you try a restore???

  • I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

    I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

    I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

  • My PDFexport always has an error when signing in .

    my PDFexport always has an error when signing in . What can I do to troubleshoot

    Hello don muchie,
    The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

Maybe you are looking for