I always see on my iphone 4 " it safe mode". why?
i always see on my iphone 4 " it safe mode". why?
Is it jailbroken? If it is, hold down the home button and the sleep button until it goes black and it should restart.
Similar Messages
-
Using MacApp Store on a MacMini (early 2009) with Mac OS X 10.9 (Mavericks). Update always searches for some time and ends with an error (as above). I have tried this in Safe Mode and as a new user but the same result. I have re-indexed spotlight.
Back up all data.
From the menu bar, select
▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
If there's no change, or if no proxy is in use, continue.
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 3
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be an item named System. If not, select
File ▹ Add Keychain
from the menu bar and add the following item:
/Library/Keychains/System.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings.
Step 4
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 5
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 6
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Step 7
Reboot, empty the Trash, and test. -
Iphone 3gs in safe mode and computer does not recognize it and shows as "new hardware"
My iphone 3gs is in recovery mode. And when i plug it in to my computer it shows up as " found new hardware". Now i reinstalled itunes many times. trying different versions of itunes as well. I have tried many things and my computer just wont recognize it. using a diffrent computer is not an option. What can i do to my computer to try and get this thing to connect??
When you say you have reinstalled iTunes many times, have you followed the directions Apple gives for uninstalling and reinstalling iTunes and all it's ancillary applications and processes?
Apple's documentation on the process can be found here:
Windows XP: http://support.apple.com/kb/ht1925
Windows Vista or 7: http://support.apple.com/kb/HT1923
Mac OS X: http://support.apple.com/kb/HT1224
I hope this helps. -
My iMac is giving me a real bad glitchy screen. I've tried wiping my hard drive and installing mavericks, but it didn't work. I restored from time machine and it worked for a few hours an then I was back to square one. How do I fix it!?
What model of iMac do you have? If it's a 2011 27" iMac with the AMD Radeon HD 6970M graphics card it might quality for this recall:iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program - Apple Support.
-
Box headed "Firefox starts in safe mode". I check choice: "Reset toolbars and controls" Box ends with 3 choices: "Continue in Safe Mode", "Quit", "Make Changes and Restart". I choose 3rd and startup proceeds normally.
Choices in box I do NOT check: "Disable all add-ons" "Delete all bookmarks except... "Reset all use preferences..." "Restore default search engines"On what kind of computer (Operating System) and with which Firefox version does this happen?
You seem to have posted this question with a iPad according to the system details list.
*http://kb.mozillazine.org/Safe_Mode
*http://support.mozilla.org/kb/Firefox+is+stuck+in+Safe+Mode -
When in Facebook, clicking on 'see all comments' only works in safe mode. And yet, when in normal mode, disabling everything doesn't help. Why?
== URL of affected sites ==
http://facebook.comWe'll need some more info about your Firefox setup. Go to '''Help > Troubleshooting Information''', then click '''Copy all to Clipboard'''. Open a reply to this post, and go to '''Edit > Paste''' to paste the info from your Troubleshooting Information page.
-
HT204023 My surface pro don't always see my iPhone to tether. How can I solve this.
So any one have any ideals. On my iPhone 5 have wifi Bluetooth and mobile hot spot turned on. Sometimes it sees it right away some time never at all. Don't matter if both are charging charged the surface almost always see other networks but not my iPhone.
Found this in another forum and it worked for me:
Get rid of any special character(s) in the name of your phone (Settings -> General -> about -> Name). Reboot and try again. (like an apostrophe)
http://www.surfaceforums.net/threads/surface-wont-connect-to-mobile-hotspot.1846 / -
Seemed to have started once i went to Ver 7, but when i use my Ipad i can always see the email
in full?I have this same problem on my iMac since installing Mavericks. The emails download, I can see who they are from and when they came, but nothing shows up in the message pane. I can see emails I got before I installed Mavericks, although about half of them did disappear. Sure would like to find a fix--perhaps the 10.9.1 update will do it?
-
Mail app receive my mails always late comparing my iPhone mail app why ?
mail app on my new MBP haswell on mavericks receive my mails always late comparing my iPhone mail app why please ?
There are issues with Mavericks Mail but only for some people. Worst on Exchange, but remember this is not "push" mail. It will never be as fast as Active Sync push.
For $1.99 try Airmail app, see if it is any faster. For me it is faster. If you rely heavily on 'On My Mac' folders then Airmail needs another release (in Beta currently) to support them properly, otherwise it is a very good app.. -
Itunes 12. I can not see my ipad / iphone via WiFi
Itunes 11 was upgraded to itunes 12 without a warning. Now, side bar is lost and IN ADDITION () I don´t see my ipad / iphone via wifi. How can I reset sichronization ?
How can I DOWNGRADE to itunes 11 ?SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
Why i keep seeing email on iphone, even after i deleted it directly from the server?
Why i keep seeing email on iphone, even after i deleted it directly from the server?
This means it doesnt sync the server inbox, only keeps pushing new emails!
How to force it to realy sync every time the server inbox, and just show me in the iphone inbox exactly what i see in the server inbox???I'm just fresh in iOS, but dont think its a POP/IMAP matter.
Always used mobile push email apps on symbian and android with POP and never had this issue.
My usual former scheme is:
a) My main email client is Outlook at my laptop (POP). This one is the master email client and after download new emails deletes them at the server.
b) My secondary is a mobile email client (also POP) - just to see whats going on and maybe reply here and there.
Meaning, laptop does cut/paste and mobile does copy/paste
So:
a) If i download a new email first using my laptop, it will never be pushed latter from iphone (its not there anymore).
b) If i download a new email first using my mobile app, and only then download it with laptop, it is still there available, and then gets deleted at the server.
c) If i download a new email first using my mobile app and if i manualy delete it and then perform another sync, then this email is deleted at server, and will be no more available for download to laptop.
Resuming:
1- The laptop ask to server what's in the inbox, downloads it all and then order the server to kill them all.
2- The iphone only ask whats new and downloads it all.
3- The iphone SHOULD ask server what's new, AND ask server what was removed from server inbox since last sync, AND tell server wich emails were removed at iphone since last sync.
As far i remember, at least one symbian app called Profimail does all this quite perfectly...
Any ideas? -
Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?
I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.
-
Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks
You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.
-
Is there a way to see on my iPhone my entire library (more than 2.000 CDs) without having all the files stored? I've noticed that, for mistake, I had some songs of my library in grey (the mp3 was not working)
Is there a way to see on my iPhone my entire library (more than 2.000 CDs) without having all the files stored? I've noticed that, for mistake, I had some songs of my library in grey (the mp3 was not working)
-
I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?
for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone
Maybe you are looking for
-
just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so ! How can I get the iMac and apple tv to sync the itunes ? i have a internet connection between t
-
Want to change Pricing Procedure in the sales order
Hello I have created a sales order. It has RVVVV9 as pricing procedure. Now I recognise that the pricing procedure in the order is wrong due to incorrect CUSTOMER PRICING PROCEDURE in Customer Master data. Now I changed the CUSTOMER PRICING PROCEDURE
-
IPS shows Memory usage 80 % is that normal ?
Hi there. I have a 2 5525x configured as active/standy and bot IPS modules configured with defaults there is no internet connection to them and no traffic passing thru , but IPS show memory usage 80% is that normal ?
-
How to convert a boolean expression into a number in SQL (not PL/SQL)
I have a boolean expression FIELD IN (SELECT FIELD FROM TABLE) which I would like to convert into a number, preferably into 0 for true and into 1 for false. The reason being that I want to sum the values in a HAVING clause. I have tried with DECODE,
-
Updating to iOS 4.0 --- Stuck on 'Restoring iPhone firmware'
So basically, I was updating my phone to iOS 4.0 and all was going smoothly until now. It has been stuck on "Restoring iPhone firmware..." for the past hour and a half. My phone had turned off and I searched around and was told to turn it back on aga