I am confused by the layout of the I tunes Store...recently the entire graphics on the i tunes store pages are a complete mess, not downloading, creating odd layover and jumbled data and making it virtually impossible to access or read. Help!?
I am confused by the layout of the I tunes Store...Ive had no problems or troubel for YEARS with the I Tunes store, but recently the entire graphics on the i tunes store pages are a complete mess, not downloading, creating odd layover and jumbled data and making it virtually impossible to access or read. I am looking for information or guidance on how to re-boot or fix this - Help?!
I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?
Restore it using the computer you normally sync with.
-
The date and time is not working after setting it to current date and goes back to may,26 2011
the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th
On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.
-
when attempting to format region and set date and time the busy icon appears and seems to stay like this?
Click on DU's Partition tab when you have the raw drive name selected, then set it to one partition, Mac OS Extended. If it crashes or freezes, it is finding a bad block and can't write.
In any event, if you want to use the drive, and have not zeroed it before, you should now.
Click on Erase -> Security Options -> Zero out data. Still with the full drive selected and not any partition(s).
Then repartition the drive if needed.
Boot from the DVD if that doesn't work. And no, TTPro has never mapped out bad blocks let alone create partitions.
Disk Utility in 10.4.8 is quite good, excellent in fact. No need for an alternative.
Your eMac drive may need to touch of Disk Utility itself. FSCK from the command line, clear the caches with Applejack along with check for corrupt plists. Between Disk Utilty and Applejack (free/shareware) never had to use TechTool Pro - or at least there weren't any errors after those two got done. But if you want a good 3rd party, pick up Disk Warrior 4. -
I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.
No, but if the answer was yes it's a little late to start getting freaked out about it.
-
To display "modified" by and "modifed date" and the end of every sharepoint page
Hi there,
I want to display
"modified" by and "modifed date" and the end of every sharepoint page and I have as many as 2000 pages
I have the code for it as below which I have placed in my master page
<SharePointWebControls:DateTimeField FieldName="Modified" EnableViewState="true" Visible="true" runat="server" ControlMode="Display"/>by
<SharePointWebControls:UserField FieldName="Modified By" Visible="true" runat="server" ControlMode="Display"/>
The problem is I am not understanding under which div should I place it to be able to see it at the end of the page.
Please suggest.Hi,
According to your description, my understanding is that you want to insert the two fields at the end of the page by inserting the corresponding controls into the master
page.
The figure below will show how to insert code into master page:
At the end of the page, it will be:
Thanks,
Dean Wang -
I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this to resolve the issue. Thanks for any help!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR -
I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
I just purchased Final Cut Pro from the App Store and it will not download to my computer. I try and install it from my purchases file but nothing happens. Any suggestions?
If it's in the purchased page and doesn't download, you should contact Apple.
-
I keep getting the message" There ais a problem with this windows Installer Package. A program required for this install to complete could not be run. Contact your support personnal or package vendor". I get this whentrying to update itunes.
Does anyone have a idea how to fix this/
ThanksTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Get-Content and add Date and Time in a new file
Hello,
in a existing file I have data like:
1;Idle
5;chrome
1;spoolsv
Now I need to grab the content and add date and time in front of each line and save it to another file like:
07.04.2015;10:18;1;Idle
07.04.2015;10:18;5;chrome
07.04.2015;10:18;1;spoolsv
But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
GreetingsHello,
If you need a new file with the desired output try this
get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
regards,
V
Venu -
Keychain problem and "Set date and time automatically"
Something very strange appened to me today. I spent a few hours to get it through.
All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
Sorry for my English (I'm from Italy).
Someone got the same issue?That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
Would you mind double-checking the following setting, using the AirPort Admin Utility?
AirPort Tab - Base Station Options: Logging/NTP
- Set Date & Time Automatically: time.apple.com (checked)
Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router? -
Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!My situation:
- get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
My system: XP SP3 with all latest updates.
Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
- ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
- ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
- removed all apple software update registry entries.
- removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
- removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software update folders) (hidden folder).
- DID NOT need to restart
- downloaded latest iTunes update (1051)
- opened using WinRAR
- extracted all files
- ran JUST the apple software update MSI
- it succeeded
- ran JUST the iTunes MSI
- it succeeded
- normally I then uninstall the apple software update program, but DID NOT this time
- DID NOT need to restart
Hope it works for you. -
QM action not allowed for DTP requests in master data and Text tables
Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank youFolks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks -
I can't activate my apple Tv and set date and hour. Why?
I bought my apple Tv and when i's trying getting started It, the message "Ativation" and "seting date and time" never desapear.
If I try to force to go to menu, I can't activate my itunes account...
Anybody could help me?Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.
Maybe you are looking for
-
Issues with Macbook Pro Quality
I purchased a Macbook Pro (early 2008) and have been plagued with issues. It makes me question the quality control of these notebooks when they cost over 2K per machine. If you are someone who needs a laptop that is reliable, may I suggest you look e
-
Trying to link my email with a iPhone 5c
I'm trying to link my Tiscali email account with my mail app on my iPhone 5c. I input all the correct details and as i press save it pops up saying 'Cannot connect using SSL' 'Do you want to try setting up the account without SSL?' If i press No then
-
The video library is empty in iMovie on iOS after update to iCloud photo library
I updated to iCloud photo library and all of my photos and videos are now in the cloud instead of my iDevice. When I open iMovie in iDevice, the photo/video library is empty. How can I use my videos in projects?
-
How to provide page-level security..
HI, I have a requirnment that a single report having multiple pages is generated such that each or some of the pages have security tags that are compared to a security identifier list of a particular user that acts as a security clearance for that us
-
How do i move my apps from a iphone 3 to a iphone 4
how do i move apps from a iphone 3 to a iphone 4