I am currently getting finder error screen saying "Quartz-filter plugin" error, Please report to apple. Can anyone please help me find a resolution for this error?

If it were me I would schedule an appointment at the store where you bought it and meet with the Manager of the store in person. Print this post and bring it with you along with your iMac.
And change the password on your Apple ID and then see if there are in purchases in your account that you did not make. If there are then someone did get your ID and password. If not someone got your Credit Card information from somewhere and used it.

Similar Messages

When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

First thing i would try is to use another cable if available.

Help! Can any tell me what cause / remedy is for this error

Can any tell me what cause / remedy is for this error:
[1/29/08 10:52:05:009 GMT] 4131a8 SystemOut
U 2008-01-29 10:52:05,009 [QuartzWorkerThread-0] FATAL
com.scheduler.service.businessservice.ReportExecution
() 190470534 - ****** METHOD FAILED ******WebIntelligence SDK / JSP
Exception --- Number :10480 --- javaError : WI Internal Error = 100
--- Description : WI Error while trying to get HTML view for the
document

Afraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder

HT5934 I keep getting an error message when trying to instal is7 in my iPad 2 . Can anyone pls help . I lost wifi for a white during the installation ...

Hello
Can anyone assist me with installing ios7 on my ipad2 please ?

laleh08 wrote:
Hello
Error message is "unable to install update " "an error occurred during installing IOS7 "'
Can you assst ?
Ooof... I hate those super-generic messages. If I were in your shoes, I'd start all over again with a new download. My WAG is that your first download was corrupted.

Reg: can anyone plz help me finding a badi for FB01

hi..,
   My requirement is to capture the profit center & change it w.r.to the profit center available in purchase order while posting a documet in FB01. iam trying to find a badi for this.. can anyone plz suggest me, how to proceed??? this is the first time iam dealing with badi's...

just run this program u find badi related to transaction.
*& Report ZNEGI16                                                     *
REPORT ZNEGI16                                 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
* Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
* Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
* For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.

What is the best Resolution for this Error: Failed to execute IS server package because of error 0x80131904. Server:

Dear Forum Members,
I have an SSIS running perfectly when i run it in Visual Studio Shell. I have organized it into a job which runs well on SQL Server agent at intervals.
However, suddenly, i started having this error as stated in the title. Please find details of the error below and kindly help resolve it ASAP.
Error Details:
Date 1/27/2015 11:24:00 AM
Log Job History (FmdqSync)
Step ID 1
Server ITGTESTSERVER
Job Name FmdqSync
Step Name S1
Duration 00:00:30
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:24:00 AM Failed to execute
IS server package because of error 0x80131904. Server: ., Package path: \SSISDB\FMDQSync\FMDQServerDataSync\FMDQServerDataSync1.dtsx, Environment reference Id: NULL. Description: Timeout expired. The timeout period elapsed prior to completion of
the operation or the server is not responding. The statement has been terminated. Source: .Net SqlClient Data Provider Started: 11:24:00 AM Finished: 11:24:30 AM Elapsed: 30.187 seconds. The package execution
failed. The step failed.

Hi Sadeeq,
Based on your description and the error message, it should be a timeout issue when the ADO .NET Source connects to the source database. So, please refer to the following two suggestions:
Double click on the ADO .NET Connection Manager, click the All tab, and set the “Connect Timeout” property to a bigger value. By default, it is 15 seconds.
Increase the DefaultBufferSize value of the Data Flow Task. By default, the DefaultBufferSize is 10 (MB), you can increase it to a value that is less than 100 (MB).
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Since ios 8.02 keep getting pop up saying item cannot be downloaded, done or retry. neither option stops this pop up window. Also screen movement is very herky jerky. I hope Apple can figure out their screw up before I bounce this thing off the wall.

Why did I ever install ios 8.02. Nothing is right on my ipad. Jerky movement, screen freeze, pop up window telling me unable to download item ( what item?), wifi connection problems. My next tablet will not be an apple product.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

I am using outlook 2013 for my emails. My junk emails get automatically deleted. I have had several people say they sent me emails and i can not find them. They are not in any of my inboxs. Can anyone please help

I am using outlook 2013 for my emails. My junk emails are gettting automatically deleted. Problem is i am getting sent emails from schools and others that i
am just not receving. It;s not in any of my inboxe. I am losing alot of important info and don't know why. Please help

If you suspect they are being marked as junk and deleted, turn off the auto-delete. Being that Office is a Microsoft product, you should ask them how to do that: http://www.microsoft.com/mac.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

TV Screen says "No signal" when I try to use apple TV. Was working. ie Little Apple symbol would appear on TV screen, but now get "No signal" Internet connection working (light on apple TV)...tried new HDMI cable but still "No signal"

TV Screen says "No signal" when I try to use apple TV. Was working. ie Little Apple symbol would appear on TV screen, but now get "No signal" Internet connection working (light on apple TV)...tried new HDMI cable but still "No signal" HELP please

Same exact problem with my Apple TV. Worked like a charm the first two times we used it. Haven't used it in about a month, now no Apple logo when I turn it on, or the logo appears momentarily and distorted, and then an error message from my Samsung HD TV: Mode Not Supported.
What changed?
Bill O'Rourke
***@***********.com
<Email Edited by Host>

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

Hi Rave,
Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version". E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
Any suggestions?

InDesign CS 5.5 - Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.

Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

Apple TV won't load up. the light flashes and the logo appears on the TV then it just goes off and starts again. I've tried restoring via USB on 5 different computers and I keep getting error message 9? Can anyone please help?

I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
Can anyone please help?

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

Java has updated again today,
i use a java plug in to run my virtual software to access my work from home,
today i have an error message saying that security will not allow access to my website
i use to log in to work from, this is a JREdetection error,
my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

I'm getting a blank screen when trying to connect to my App Store.how can I fix this ?

I'm getting a blank screen when trying to connect to my App Store.how can I fix this?

I got this error after upgrading to new version. After searching these pages for an answer and not finding a usable one, I simply quit and re-opened iTunes, and... voila! Problem solved!

I am currently getting finder error screen saying "Quartz-filter plugin" error, Please report to apple. Can anyone please help me find a resolution for this error?

Similar Messages

Maybe you are looking for