I am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection.

i am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection. any suggestion please

Your first task should be to just be able to send commands to the instrument. Do as Dennis suggested and download the drivers for the instrument and get familiar with them. Build up small VIs that do little tasks with those drivers so you can get used to them. Then worry about your main interface.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
The data is being received at 1Mbps.
Thanks

Two questions:
One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

HT4859 If I got a new iPhone and backed up the data from the old one, it should show up once the new one is set up right? Does an "incomplete" status mean it did not back up and can not be restored to the new iPhone?

If I got a new iPhone and backed up the date from the old one, it should show up once the new one is set up right?
And does an "incomplete" status on iCloud mean it can't be restored to the new iPhone?
Help please

What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Best Way to port the data from one DB to another DB using Biztalk

Hi,
please suggest best way to move the data from one db to another DB using biztalk.
Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
of transaction in source table in sourceDB. It is processing one by one.
How/best we we can do it using bulk transfer and update the status. Since it has more than 10000 transaction per call.
Thanks,
Vinoth

Hi Vinoth,
For SQL Bulk inserts you can always use SQL Bulk Load
adapter.
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
MessageBox database and the memory issues of dealing with really large messages.
I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
records are available.
Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
If you have any more questions related to SSIS, please ask it in
SSIS
forum and you will get specific support.
Rachit

Transferring the data from one system to another system.

Hi All,
   I need to transfer the material master data from one system(e.g - dev1)
to another system (e.g - dev2).
front end application is BSP.
if the user enters the material number 1 to 20 and if he presses the submit
button, the entire data should be transferred to another system.
This transferring of data should be done in background.
1. which method we should opt for this ? either ALE or any other method like XI.
2. Is there any standard bapi function module to transfer the material master from one system to another system.
3. whether this above transferring can be done thru XI and which will be best approach for doing this?
Points will be awarded.
Regards,
Vinoth.

Hi amole,
   Thanks for the reply.
    How to use lsmw for transferring fo data from one system to another system.?
   whether to download the data from one system in excel or notepad and again to upload into other system?
   can u explain me.
Regards,
vinoth.

If I set up the ICloud, does that mean that all of my songs will be stored in Icloud? can I delete the library from my PC and only choose what playlists I want on PC?

If I set up the ICloud, does that mean that all of my songs will be stored in Icloud? can I delete the library from my PC and only choose what playlists I want on PC?

Thank you
I realize they are separate
I will do music match so that all of my songs are in ICloud
Do I need to keep the library on my PC or can I download whatever playlists I want stored on the device at that time.
Example: I have almost 1G of Christmas Music - because it is on my PC in my llibrary they sync to my ipod touch every time - i really want those stored somewhere else so they do not sync [or take space on my pc] with exception to one month per year.
I am thinking I can create space on my PC and Touch by storing songs on icloud that i do not listen to regularly; I am also thinking I can request songs by playlist to download to my touch or PC
Is that a clearer question or am I just confusing myself??

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

To Select the data from two table one is transp table and onther is cluster

Hi All,
I want to select the data from two tables
Here i am giving with an example.
Fileds: kunnr belnr from bseg. table bseg
fields: adrnr from kna1     table: kna1.
Know i want to put these into one internal table based on kunnr and belnr.
Thanks in advance.
Ramesh

Hi,
   U cant use joins on cluster table and BSEG is a cluster table so use FOR ALL ENTRIES for taht
refer this code
*&      Form sub_read_bsak
      text
--> p1        text
<-- p2        text
FORM sub_read_bsak.
*--Select data from BSAK Table
SELECT lifnr
         augdt
         augbl
         gjahr
         belnr
         xblnr
         blart
         dmbtr
         mwskz
         mwsts
         sgtxt
         FROM bsak
         INTO CORRESPONDING FIELDS OF TABLE it_bsak
         WHERE belnr IN s_belnr
         AND   augdt IN s_augdt.
IF sy-subrc EQ 0.
*--Sort table by accounting document and vendor number
    SORT it_bsak BY belnr lifnr.
ENDIF.
ENDFORM.                    " sub_read_bsak
*&      Form sub_read_bseg
      text
--> p1        text
<-- p2        text
FORM sub_read_bseg.
IF NOT it_bsak[] IS INITIAL.
*--Select data from BSEG table
    SELECT belnr
           gjahr
           shkzg
           kostl
           hkont
           ebeln
           ebelp
           FROM bseg
           INTO CORRESPONDING FIELDS OF TABLE it_bseg
           FOR ALL ENTRIES IN it_bsak
           WHERE belnr EQ it_bsak-belnr
           AND   gjahr EQ it_bsak-gjahr
           AND   shkzg EQ 'S'.
    IF sy-subrc EQ 0.
*--Sort table by accounting document
      SORT it_bseg BY belnr.
    ENDIF.
ENDIF.
ENDFORM.                    " sub_read_bseg

Reading the data from one component view into another component view

Hi All,
I have requirement to read the data from one component into another component while creating the service order. Here are the details.
Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
Refer the attachments for the component link..
Please let me know how we can achieve this one..
Thanks,
Sapsar.

Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
Below is the correction code
IF iv_index IS NOT INITIAL.
     lr_iterator ?= collection_wrapper->get_iterator( ).
     lr_current ?= lr_iterator->get_by_index( iv_index ).
     lr_entity ?= lr_iterator->get_by_index( iv_index ).
   ELSE.
     lr_current = collection_wrapper->get_current( ).
   ENDIF.
*loop back to root entity
         WHILE lr_entity->get_name( ) NE 'BTAdminH'.
           lr_entity = lr_entity->get_parent( ).
         ENDWHILE.
*Get the related entity
         IF lr_entity IS BOUND.
           lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
           IF lr_collection IS BOUND.
             lr_orgset_m = lr_collection->get_current( ).
*            lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
             lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
           ENDIF.
         ENDIF.
Thanks,
Sapsar.

How can I, or can I export my songs on my iPod back to my computer? The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this

How can I, or can I export my songs on my iPod back to my computer?
The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this same problem with my other devices (iPad 3rd Gen and iPod Nano 6th Gen). I am really frustrated now, because it seems as if I have to start all over again. This will be a royal pain in the butt! I don't understand why Apple makes this so hard and impossible to do this. Please help, anybody!!

See Recover your iTunes library from your iPod or iOS device.
tt2

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi ‏76 KB

How do I transfer the data from one iPad to another

How do I transfer all of the data from one ipad to another one?

The best way IMO is to sync each iPad with your computer. Having all your stuff backed up on a computer is a good idea anyway. Just read how many folks here are trying to recover lost stuff that could easily be copied back from either backup or iTunes on the computer.
Sync both iPads to the computer. Transfer all photos to the same computer. Then sync again selecting which items you want on each iPad.

I am doing one Labview project. so my project is about design a interface in labview which one collect the data from keithley 2400 via GPIB connection.

Similar Messages

Maybe you are looking for