I am facing problem in loading data in ap_invoices_all in R12 through API

Hi,
When I am trying to load data in R12 through API (ap_invoices_pkg. Insert_Row), I can see my record in base table ap_invoices_all but I can't find my record from frontend application.
MAGSA AP Supervisor -> Invoices -> Entry -> Invoices.
I will be very greatful if anyone can tell me the reason why I am not able to find my record.
Thanks
Ranjana

I believe the issue is related to Multi Org Access Control (MOAC) - pl see MOS Doc 420787.1 - Oracle Applications Multiple Organizations Access Control for Custom Code - for a discussion.
HTH
Srini

Similar Messages

Facing problem while loading data into XI

Hi All,
I am facing a peculiar problem while loading data into XI when we load small amount of data say 5-10 records these records gets processed, but when we try to load a bit higher volume say 100-500 which comes out to be around 7 record s per second then the record processing gets stalled. That is it gives a message that "recorded for outbound processing".
So can any body throw some light on it and can tell us why we rare facing such problem and how can we resolve that problem.
Thanks in Advance.
Regards
rahul

Hi rahul,
Deregistering and Registering the Queue is a temporary solution.
The better way to this would be to Tune your Xi system as already mentioned by Vijaya as mentioned in the guide ,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

Problem while loading data from ODS to infoobject

Hi guys,
I am facing problem while loading data from <b>ODS to infoobject</b>.
If I load data via PSA it works fine but
if I load data without PSA its giving error as Duplicate records.
Do u have any idea why it is so.
Thanks in advance
savio

Hi,
when you load the data via the PSA, what did you select? Serial or Paralel?
If you select serial most likely you don't have duplicates within the same datapackage and your load can go through.
Loading directly in the IObj will happen thefore if you have the same key in two different packages, the "duplicate records" will be raised; you can perhaps flag your IPack with the option "ignore duplicate records" as suggested...
hope this helps...
Olivier.

Facing problem in loading table using IKM Oracle Slowly Changing Dimension

Hi,
I am facing problem in loading dimension table using IKM Oracle Slowly Changing Dimension
Following is the setup :-
SRC :- source_table (MSSQL)
Staging :- staging_table (MSSQL)
TRGT :- target_table (Oracle)
-------- source_table
group_id     int
group_version_id     int
name     varchar (255)
description     varchar (255)
comments     varchar (2000)
ref_number     varchar (255)
is_latest_version     decimal (5)
is_deleted     decimal (5)
--------- target_table
id     number (38,0) - Mapped to <%=odiRef.getObjectName( "L" , "SEQ_NAME" , "D" )%>.nextval
          - Executed on target
          - defined the column as SK in model
group_id     number (38,0) - defined the column as NK in model
group_version_id     number (38,0) - defined the column as NK in model
name     varchar (255) - undefined on the model description
description     varchar (255) - Add row on change
comments     varchar (2000) - Add row on change
ref_number     varchar (255) - Add row on change
is_latest_version     number (1,0) - Add row on change
is_deleted     number (1,0) - Add row on change
start_datetime     date     - SYSDATE
               - Executed on target
               - Starting Timestamp
end_datetime     date     - NULL
               - Executed on target
               - End Timestamp
I am using following KM's:-
     LKM SQL to SQL
     IKM Oracle Slowly Changing Dimension
     CKM SQL
it gives me the following error -
920:Invalid relational operator

Hi,
Yes, this is a run-time error. Currently I am debugging it by checking SNP_SESS_TXT_LOG based on sess_no ID.
Now, I get the following error.
I just see the following in the operator:-
911 : 42000 : java.sql.BatchUpdateException: ORA-00911: invalid character
911 : 42000 : java.sql.SQLException: ORA-00911: invalid character
java.sql.BatchUpdateException: ORA-00911: invalid character
     at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:342)
     at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10720)
     at com.sunopsis.sql.SnpsQuery.executeBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
So, I do not get any idea of the exact step that is causing failure.
Is there any setting in the operator that I am missing on?

Facing problem in loading masterdata from PSA for 0cust_sales

Hi,
I am facing problem while loading Masterdata for 0cust_sales in PSA. data is coming from KNVV table but there is no duplicate record in the KNVV Table but while loading data to SAP BI, Its showing error message in PSA for few customers - duplicate records being created.
Kindly please help me with this issue
Regards,
Swapnil

Switch on Indicator: Handling Duplicate Data Records
Use
If this indicator is set, duplicate data records (that is, records with the same key) are handled during an update in the order in which they occur in a data package.
For time-independent attributes of a characteristic, the last data record with the corresponding key within a data package defines the valid attribute value for the update for a given data record key.
For time-dependent attributes, the validity ranges of the data record values are calculated according to their order (see example).
If the indicator is not set and error handling is deactivated, the request terminates once data records with the same key are detected. If error handling is activated, data records that have the same key are written to the error stack of the DTP.
Note:
If during your data quality measures you want to make sure that the data packages delivered by the DTP are not modified by the master data update, you must not set this indicator.

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Problem in Loading data for clob column using sql ldr

Hi,
I am having problem in loading data for tables having clob column.
Could anyone help me in correcting the below script for ctrl file inorder to load the data which is in mentioned format.
Any help really appreciated.
Table Script
Create table samp
no number,
col1 clob,
col2 clob
Ctrl File
options (skip =1)
load data
infile 'c:\1.csv'
Replace into table samp
fields terminated by ","
trailing nullcols
no,
col1 Char(100000000) ,
col2 Char(100000000) enclosed by '"' and '"'
Data File(1.csv)
1,asdf,"assasadsdsdsd""sfasdfadf""sdsdsa,ssfsf"
2,sfjass,"dksadk,kd,ss""dfdfjkdjfdk""sasfjaslaljs"
Error Encountered
ORA-01461: can bind a LONG value only for insert into a LONG column
Table sampThanks in advance

I can't reproduce it on my 10.2.0.4.0. CTL file:
load data
INFILE *
Replace into table samp
fields terminated by ","
trailing nullcols
no,
col1 Char(100000000) ,
col2 Char(100000000) enclosed by '"' and '"'
BEGINDATA
1,asdf,"assasadsdsdsd""sfasdfadf""sdsdsa,ssfsf"
2,sfjass,"dksadk,kd,ss""dfdfjkdjfdk""sasfjaslaljs"Loading:
SQL> Create table samp
2 (
3 no number,
4 col1 clob,
5 col2 clob
6 );
Table created.
SQL> host sqlldr scott/tiger control=c:\temp\samp.ctl log=c:\temp\samp.log
SQL> select * from samp
2 /
        NO
COL1
COL2
         1
asdf
assasadsdsdsd"sfasdfadf"sdsdsa,ssfsf
         2
sfjass
dksadk,kd,ss"dfdfjkdjfdk"sasfjaslaljs
        NO
COL1
COL2
SQL> SY.

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Facing problem in saving data without overlapping in for loop

Hi,
I am facing problem in writting data withou overlapping if i run outer loop for 2 or more times and in inner for loop i am getting array in a way I want but when i try to build that array with logging temperature i am not able to do it. Please guide me through ths.
Thank You
Hnagpal
Solved!
Go to Solution.
Attachments:
data storage.vi ‏31 KB
what i am getting.xlsx ‏10 KB
what i want.xlsx ‏10 KB

Thanks odessy27, Matthew Kelton, for replying.
Matthew Kelton: Thanks for the solution i am adding outer loop so that i can increase the number of row. I am using it for some application which require me to save data several time and i used random number here but originally instead of random number there will be power meter reading and i want to save it every hour and plot it. I am also attaching a file what i made I don't know is this a good way or not. Actually i will also beneeded to plot a graph. But again how to increase a row and without replacing previous data i can write another row.
Yes i want to make one row for each iteration.
I attached both files in 2009 version.
Thank You
Himanshu Nagpal
Attachments:
desired result.xlsx ‏10 KB
data storage (1).vi ‏26 KB
data storage.vi ‏37 KB

Problem while writing data on xls file using jxl API

Hi,
I am getting problem while writing data on excel file using jxl api.
When i write data on file and all handles associated to the file are closed, file size increases but when i open the file nothing is written in it and when file is closed manually from excel window, file size decreased to its original that was before writing data.
here is code:
          FileOutputStream os = new FileOutputStream(this.dirPath + this.fileName, true);
          WritableWorkbook this.workbook = Workbook.createWorkbook(os);
after writing data following handler are closed:
this.os.flush();
                    this.workbook.write();
                    this.workbook.close();
                    this.os.close();
                    this.os = null;
can any body help me.
Thanks in advance

Err, I did help you. I did understand your problem; and I solved it for you. What was missing was that you apparently made no effort to understand what you were being told. Or even consider it. You just argued about it, as though you were the one with the solution, instead of the one whose code didn't work.
And the other thing that was missing was the part where you said 'thank you' to me for solving your problem. Somewhat more appropriate than biting the hand that fed you, frankly. I do this for nothing, on my own gas, and it's extremely irritating when people keep asking about problems I have already solved for them. I am entitled to discourage that. It's part of making them more efficient actually.
But it happens often enough that it also makes me think I'm just wasting my time. Probably I am.

Problem in Loading Data from SQL Server 2000 to Oracle 10g

Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
     at javax.swing.JTable.boundRow(Unknown Source)
     at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
     at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
     at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
     at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
     at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
Neel

Hi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel

Problem in loading data

Hello All,
I am using data source 2LIS_11_VAHDR in BI 7.0 to load data to ODS.
I am using the full upload.
When i schedule the infopackage i dont get any records.The request status is shown as running.
So i check the job in the source system.But i Saw that Job status is Released and not active.
There were some entries already present in the extraction queue.So I tried scheduling Job to move the entries from extraction queue.But this job too is showm as released and not active.
Please let me know what can be the problem.

Hi,
Check in RSA3 if you are getting records then you should be able to get it to PSA and then ODS.
If not then replicate the data source activaet the transfer structure and again laod . This will help.
Regards,
Amol

Problem in loading data to DSO

Hi,
I have a problem in loading the data to DSO through Info package. The delta request has been running for a long time, but no data has been loaded. The job details screen is showing as below.
Previously there was no issues with this chain.
Can some one guide me to solve this issue please.?
Regards
Ragu

Hi Ragu,
The same issue has been happened for me long time back. I have solved this issue by running the Repair Full request and then Init. delta without Data Transfer.
May be this may also work for you.
Steps:
1.Delete the request by marking it as RED
2.Run Info package Repair full Request.
Once this is success,
3.Change Info package and Run Init delta without data transfer
4. If it pop ups Init Delta already exists,then delete the previous init from the source.
after the init delta is ended fine, then change your Info package to Delta as it is before.
Hope it helps.
regards
Deva

(Class cast Exception)Problem while loading data fro database in java class

Dear all,
Please help me...to solve this
I have a database having two columns of String and Date Types.
In my java code i was trying to load the data to a UI.
I am successfull in loading the String type value.
But while loading date field value,is showing Class cast Exception.
What i am doing is Getting the values from database to a String[] array.
So my question is how to
get the Date field as date field itself,Then convert it to a String..Then put it in to String[] array...
Any body please help...If any one want more clarification in question i will give......

Hi,
I am using GWT to display my data in a Grid.
So it will accept a Single two dimensional String array....Here i have one as String and other as Date.
So i was trying to get each row in a sindle dimensional array array[] then store it in a list.
Iteration goes up to 10 rows.After i am setting it in to a list
ie list.add(array);
Now while returning this list i am doing this
"return (String[][])list.toArray(new String[0][]);"
When i tried to get the date element to String array it is showing class cast exception. When i tried with toString() method it is showing the same problem.

Problem with loading data using SQL LOADER

I am having following files with me when i run following command at command prompt
sqlldr scott/tiger@genuat control =c:\emp.ctl
then giving error as
SQL Loader 500: unable to open file
SQL Loader 553: file not found
emp.dat file data
1111,sneha,CLERK     7902,17-Dec-80,800,20
2222,manoj,SALESMAN,7698,20-Feb-72     ,1600,6500,30
3333,sheela,MANAGER,7839,8-Apr-81,2975,20
emp.ctl file
LOAD DATA
INFILE 'c:\emp.dat'
APPEND
INTO TABLE emp
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
(EMPNO,
ENAME ,
JOB,
MGR,
HIREDATE,
SAL ,
COMM,
DEPTNO)
can anyone tell me what is problem in above file why data is not loaded in table??

I don't find any problem if you invoke the SQLLDR using the below command(and if you are certain that the control file resides in the C: drive).
sqlldr scott/tiger@genuat control =c:\emp.ctl
If this doesn't work then invoke the SQLLDR from the C: prompt itself.
sqlldr scott/tiger@genuat control=emp.ctl
It would locate the control file and check whether the sqlldr completes successfully?

I am facing problem in loading data in ap_invoices_all in R12 through API

Similar Messages

Maybe you are looking for