I am getting below error when trying to set the peer top peer replication

TITLE: New Publication Wizard
SQL Server could not create publication 'pub_default'.
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Could not find stored procedure ''.
Changed database context to 'AdventureWorks2008R2'.
Warning: The "immediate_sync" property for publication "pub_default" has been changed to "true" because it is required by Peer-To-Peer.
Warning: The "allow_initialize_from_backup" property for publication "pub_default" has been changed to "true" because it is required by Peer-To-Peer. (Microsoft SQL Server, Error: 2812)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.2100&EvtSrc=MSSQLServer&EvtID=2812&LinkId=20476
BUTTONS:
OK
Thanks

Hi Ajay.G,
I’m writing to follow up with you on this post. Was the problem resolved? According to your description, the error 2812 usually occurs in the following situations.
1. The stored procedure which you executed does not exist.
2. If it does exist, it may occur that you do not fully qualify the procedure name. Or the procedure is not owned by the user attempting to execute it.
For more information, see:
How to: Configure Peer-to-Peer Transactional Replication (SQL Server Management Studio).
There is a similar issue about error 2812, you can try to clean up the database from any replication settings on the publisher and distributor, then recreate publication and check if it can succeed, You can review the following post.
http://www.sqlservercentral.com/Forums/Topic613590-291-1.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

Getting an error when trying to Publish the Schedule back to ERP in PS

Hi,
I am trying to release the Approved schedule back to ERP(“Release Schedule” option) from PS workbench but getting error messages like:
Error 1: PS\messageDictionary.txt doesnot exist
Error 2: An error occurred when trying to execute script:
c:\scp\8.12.1\ps\bin\..\..\commom\start\FileUploader_ps.bat C:\scp\8.12.1\ps\bin\..\..\..\data_stpre\5 5-gzip
Please advice
regards,
Praveena

Check the installation. Go to start --> All programs. verify that the folder avaialble is 'Oracle Supply Chain Planner'.
If you have JD Edward supply chain planner then you will not be able to publish back the schedule. There are 2 installers involved. In case of Oracle installer, it is silent installation and the instllation path is picked up from the profile option 'MSC:PS/SNO Installation path'.
In case of JD Edward installer, the PS installation wizard will open and you need provide the path. Remove PS from you client machine, clear java cache and try to download any model. If you have Oracle installer then model will open directly. If you get JD Edward installer, it will pen the wizard and you need to carry out installation steps manually. If you get JD Edward installers, you will not be able to publish back the schedule.

Error when tried to set the PreserveSequence property in a map to "yes"

Hi there,
I have a lab ORU^R01 msgs that has multiple OBR and OBX segments, I tried to preserve the order by setting the PreserveSequence property but in run time i get this error:
The variable or parameter "http://schemas.microsoft.com/Biztalk/2003/var:v14' is either not defined or it is out of scope.
I have to geth this sorted as the users do not want them out of order.
Can I get help on this please,
sushma

Hi Shushmakad,
If you set Preserve Sequence Property=true. BizTalk will always expect source node will be in sequence, but you have option to change sequence of destination schema by updating xslt.
Can you test your map with sample input message with sequence.
Debug xslt (use this url for reference)
http://msdn.microsoft.com/en-us/library/ms255602(v=vs.110).aspx
Regards
Suman

I get unknown error when trying to set up iCloud on my PC

WHen installing iCloud manager on my pc (Dell XPS 1330 laptop) everything seems to install ok untill I try to sync for the first time.
IT looks like its working but then an "ICloud has experienced a problem" message appears. It seems like its an unknown error. I have uninstalled and started over with no luck. Any thoughts?

I ignored my laptop for a couple of days and last night noticed that it had been updated by the cloud.
I had added a test contact to my iPhone and it has appeared on outlook on my laptop.

I keep getting an error when trying to set up my gmail account

Any ideas? I have enabled my IMAP settings but can't get email. Help!

I just selected "add new account", clicked on Gmail, filled in the User name and Password and I was good to go.
Very simple and I might add, much more stable than using Hotmail or MSN mail. I continue to have trouble with outgoing mail failures with these two accounts, but Gmail just keeps cooking.

I get an error when trying to download the creative cloud installer. The message says to contact customer support.

Any advice for not being able to download the creative cloud installer?

Lisalynn33 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download errors.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Hi All,
I am getting the below error when trying to start the ToolsAndFrameworks.
Starting Workbench (background process)
The BASEDIR environment variable is not defined correctly
This environment variable is needed to run this program
Regards
SK

Hi SK,
This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
HTH,
Mahesh

HT1222 I am getting an error when I am installing the new update for my iPhone. Is anyone else getting an error in the middle of installing?

I am getting an error when trying to install the current updates.

Why don't you try telling us what the error is...
Check this document for troubleshooting information: http://support.apple.com/kb/ts3694

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
Regards, Steve

Hi
Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
Troubleshooting CD or DVD Disc Burning Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Keep getting 5002 Error when trying to Sign In

Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
Marcus

Thank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

I am getting below error when trying to set the peer top peer replication

Similar Messages

Maybe you are looking for