I am having trouble getting sqlplus working on solaris 9 with oracle 10g

When I type the command sqlplus I get the following issue.
I am new to a Solaris 9 environment and also new to Oracle DB.
bash: sqlplus: command not found
What are the few things I should do, and is there any good references for me to look into.
With many thanks,
Raki

Thanks guys I got it working now .....
I had to set the path correctly.
Now Im having issues logging in :(.
bash-3.00$ sqlplus
SQL*Plus: Release 10.1.0.3.0 - Production on Tue Oct 31 11:46:35 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter user-name: sample
Enter password:******
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
does this mean Oracle is not installed yet?
--Raki

Similar Messages

Having trouble getting mic working properly

I have a Sound Blaster X-Fi Fatalty Pro. I hooked up my mic in the flexijack and set my mode to game (I'm trying to use this with Steam's voice communications). It is doing unexplainable things though. I've disabled my onboard sound in the BIOS so I know it has nothing to do with this - it's all the X-Fi.
The mic picks up sound and transmits it straight through the speakers. I can't mute it at all, well I haven't found a way to so I'm looking for some help. Even in the Sound panel under Recording devices if I mute Microphone, Microphone FP, Digital In, and "What U Hear" I still get sound through the mic. I can't figure out what is possibly using it! When Microphone is enabled the sound meter doesn't change when I speak into it, so even though the flexijack is technically working it's like the drivers don't detect the mic is connected.
Please give me some suggestion. I'm all out of ideas.
I'm one of the Creative converts (who have now converted to other brands). Last Creative card I had was a Sound Blaster 2 Platinum. It was a wonderful card and my front panel died and Creative even replaced it out of warranty! As soon as I got this X-Fi it was problems from day . Wouldn't detect rear speakers for the longest time and about half the time I change audio effect settings in the Entertainment mode nothing happens, plus now this. Never again Creative...

I have a Sound Blaster X-Fi Fatalty Pro. I hooked up my mic in the flexijack and set my mode to game (I'm trying to use this with Steam's voice communications). It is doing unexplainable things though. I've disabled my onboard sound in the BIOS so I know it has nothing to do with this - it's all the X-Fi.
The mic picks up sound and transmits it straight through the speakers. I can't mute it at all, well I haven't found a way to so I'm looking for some help. Even in the Sound panel under Recording devices if I mute Microphone, Microphone FP, Digital In, and "What U Hear" I still get sound through the mic. I can't figure out what is possibly using it! When Microphone is enabled the sound meter doesn't change when I speak into it, so even though the flexijack is technically working it's like the drivers don't detect the mic is connected.
Please give me some suggestion. I'm all out of ideas.
I'm one of the Creative converts (who have now converted to other brands). Last Creative card I had was a Sound Blaster 2 Platinum. It was a wonderful card and my front panel died and Creative even replaced it out of warranty! As soon as I got this X-Fi it was problems from day . Wouldn't detect rear speakers for the longest time and about half the time I change audio effect settings in the Entertainment mode nothing happens, plus now this. Never again Creative...

I bought an airport extreme (5th gen) and have set it up today. However I am having troubles getting it to co-excist with my already set up ethernet connections which are necessary due to the size of the house.

Please let me know how I can set it up so it works along with my ethernet cables and downstairs network. I have several ethernet connections that I need to use as they are out of range of the network.

When trying to connect my AppleTV 3rd gen to another ethernet port of airport extreme with another faster (85mbps) Trendnet ethernet adapter via a different electrical outlet, my extreme goes from green light to flashing amber light and my wifi stops working.
If the Apple TV was originally setup for WiFi, I suggest that you reset the device back to default settings and then configure it again with Ethernet plugged in. Settings > General > Reset > Reset Settings
As a test, connect a spare Ethernet cable of any length (that you know is working) from the LAN <-> port on the AirPort Extreme to the Apple TV for the setup.
Setup the ATV again and double check to make sure that it is operating correctly
Change the location of the ATV back to the desired location on the network behind the powerline adapters
If you have a problem now, the first thing to check is the powerline adapter and or wiring

I am having trouble getting my ipad to recognize the sat connection have turned off and back on it shows there but does not load safari

I am having trouble getting my ipad to communicate with sat connection I have tried turning off and on re installing the sat connection but still cannot get safari to load

Hello Brenda,
Thank you for the details of the issue you are experiencing with your iPad. It sounds like you're not able to access the Internet on your iPad. I found a couple of resources that will help.
If you are having trouble connecting to the Internet using Wi-Fi, I recommend the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
If you are not able to access the Internet when connected to a cellular network, I recommend the following article:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thank you for using Apple Support Communities.
Best,
Sheila M.

TS3276 I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps.

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

TS1550 What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine

What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.

See if this helps...
http://pondini.org/TM/C12.html

I am having trouble getting my Blutooth Magic Trackpad to work in windows 7 running through a bootcamp partition on my 2008 MacPro. Any ideas?

I am having trouble getting my Blutooth Magic Trackpad to work in windows 7 running through a bootcamp partition on my 2008 MacPro. Any ideas?

I installed the apple drivers and it works though unlike
in osx where it works from the start in windows I need to click it once before it begin to work

SoundBlaster X-Fi Surround 5.1 - Having Trouble Getting all of my 5.1 to work

MSoundBlaster X-Fi Surround 5. - Having Trouble Getting all of my 5. to work?Hi Everyone,
This has been an on and off problem for me since I've purchased my X-Fi: I can only get certain speakers to work at a single time. As you know, in 5. there are the three /8 inch heads: green, black and orange. All of the heads, when plugged into the green slot (I am using the cable that converts the green head into the red and white inputs, not the green headphones input) on the X-Fi work. I take this to mean that all of the speakers do in fact work and that the problem lies within the device/drivers. I have looked high and low through windows and the creative control panels and changed all of the speaker settings to 5.. Maybe I am overlooking something.
I am using Windows 7 32-bit. I have tried both versions of the driver that are available via Creative's website.
Any help would greatly be appreciated.
Sincerely,
Dave

@Re: SoundBlaster X-Fi Surround 5. & SPDIF - it's despairingA Ok - Problem fixed. Again I am using a XP 32bit, latest driver.
I have disabled all the features (cmss, 3d, etc) and used the provided creative player and powerdvd player. Both work FINALLY right. I can listen to .ac3 5. music track and the SPDIF as a pure passthrough is sending 5. output to my Bose receiver. Same for the DVD sound.
Note when I used the VLC player the SPDIF still did not work right ... but since it does with the creative player I am good with it.
Once you activate any of the feature then the sound if brought down to a 2.0 (stereo) sound.
In my driver I do not have an option to disable the analog output - I assume that is different then the Vista one.
One other question. I have tested the card with Shure SE530 headset and the output is TERRIBLE - does it work fine for you with headset? (I am planning to use it only as SPDIF so no biggy but I was surprised on the poor quality. Those headset are amplified and filtered so there could be some issue with that).

Having trouble getting Unwired Platform to work.

I'm having trouble getting the formatting to work properly. Sorry about that.
Hi,
I'm having trouble getting the Unwired Platform to work on my server. I've installed everything on my machine.
I'm having trouble accessing the control center and pinging my Unwired server through the Unwired Workspace.
I've pasted in the error output below.
Any help would be appreciated.
Thanks,
Dan
                                                                                Here is the pinging error:
com.sybase.uep.admin.client.AdminException: com.sybase.djc.SystemException: Error: Connecting to host: CI0000001507589.rim.net, port: 2000.
     at com.sybase.sup.admin.client.impl.AdminContext.initialize(AdminContext.java:106)
     at com.sybase.sup.admin.client.impl.AdminContext.getInstance(AdminContext.java:40)
     at com.sybase.sup.admin.client.impl.ServerConnectionImpl.<init>(ServerConnectionImpl.java:22)
     at com.sybase.sup.admin.client.impl.ServerConnectionImpl.<init>(ServerConnectionImpl.java:29)
     at com.sybase.uep.admin.client.ServerConnectionManager.ping(ServerConnectionManager.java:191)
     at com.sybase.uep.admin.client.ServerConnectionManager.updateConnectionProperties(ServerConnectionManager.java:98)
     at com.sybase.uep.admin.client.ServerConnectionManager.clusterConnect(ServerConnectionManager.java:68)
     at com.sybase.uep.datasources.uepprofile.UEPServerConnection.<init>(UEPServerConnection.java:59)
     at com.sybase.uep.datasources.uepprofile.UEPConnectionFactory.createConnection(UEPConnectionFactory.java:16)
     at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(Unknown Source)
     at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(Unknown Source)
     at org.eclipse.datatools.connectivity.ui.PingJob.createTestConnection(Unknown Source)
     at org.eclipse.datatools.connectivity.ui.PingJob.run(Unknown Source)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: com.sybase.djc.SystemException: Error: Connecting to host: CI0000001507589.rim.net, port: 2000.
     at com.sybase.djc.rmi.iiop.client.Connection.init(Connection.java:619)
     at com.sybase.djc.rmi.iiop.client.Connection.getInstance(Connection.java:65)
     at com.sybase.djc.rmi.iiop.client.ConnectionPool.iiopConnection(ConnectionPool.java:455)
     at com.sybase.djc.rmi.iiop.client.ConnectionPool.newConnection(ConnectionPool.java:410)
     at com.sybase.djc.rmi.iiop.client.ConnectionPool.get(ConnectionPool.java:152)
     at com.sybase.djc.rmi.iiop.client.ConnectionPool_DJC.get(ConnectionPool_DJC.java:30)
     at com.sybase.djc.rmi.iiop.ObjectRef.$connect(ObjectRef.java:275)
     at com.sybase.djc.org.omg.CosNaming.iiop_stubs.NamingContext._is_a(NamingContext.java:60)
     at com.sybase.djc.rmi.iiop.client.ClientNamingContext.init(ClientNamingContext.java:697)
     at com.sybase.djc.rmi.iiop.client.ClientNamingContext.getInstance(ClientNamingContext.java:76)
     at com.sybase.sup.admin.client.impl.AdminContext.initialize(AdminContext.java:99)
     ... 13 more......
Line: -
When I try to access the control center through IE, this is what I get back:
HTTP ERROR 500
Problem accessing /scc/. Reason:
    Failed to begin transaction
Caused by:
com.sybase.scc.orm.dao.DaoException: Failed to begin transaction
     at com.sybase.scc.orm.hibernate.HibernateSessionManager.beginTransaction(HibernateSessionManager.java:321)
     at com.sybase.scc.servlet.filters.HibernateSessionFilter.doFilter(Unknown Source)
     at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157)
     at com.sybase.ua.services.http.servlet.filters.HttpsRedirectFilter.doFilter(HttpsRedirectFilter.java:129)
     at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157)
     at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:388)
     at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216)
     at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182)
     at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
     at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:418)
     at org.mortbay.jetty.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:230)
     at org.mortbay.jetty.handler.HandlerCollection.handle(HandlerCollection.java:114)
     at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
     at org.mortbay.jetty.Server.handle(Server.java:326)
     at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:542)
     at org.mortbay.jetty.HttpConnection$RequestHandler.headerComplete(HttpConnection.java:923)
     at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:547)
     at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
     at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
     at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
     at org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:680)
     at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:582)
Caused by: org.hibernate.exception.GenericJDBCException: Cannot open connection
     at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103)
     at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91)
     at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
     at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:29)
     at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:426)
     at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:144)
     at org.hibernate.jdbc.JDBCContext.connection(JDBCContext.java:119)
     at org.hibernate.transaction.JDBCTransaction.begin(JDBCTransaction.java:57)
     at org.hibernate.impl.SessionImpl.beginTransaction(SessionImpl.java:1326)
     at com.sybase.scc.orm.hibernate.HibernateSessionManager.beginTransaction(HibernateSessionManager.java:307)
     ... 21 more
Caused by: java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection refused: connect
     at com.sybase.jdbc3.jdbc.ErrorMessage.raiseError(Unknown Source)
     at com.sybase.jdbc3.jdbc.ErrorMessage.raiseErrorCheckDead(Unknown Source)
     at com.sybase.jdbc3.tds.Tds.a(Unknown Source)........

HI,
as well I would check if ou are able to access the URL in browser itself - otherwise enter the URL into your host file and try again.
Hope this helps.
Regards,
Oliver

Having trouble getting Skype to work. It did when I first got the computer about a yr ago but then quit. I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working. Any suggestions?

Having trouble getting Skype to work. It did when I first got the computer about a yr ago but then quit. I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working. Any suggestions?

all I can suggest is completley unistall as here
https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x
Then reinstall
http://www.skype.com/en/download-skype/skype-for-mac/

Having trouble getting my uploaded cds which are in itunes and working properly to transfer to my iphone, only purchased songs sync

having trouble getting my uploaded cds which are in itunes and working properly to transfer to my iphone, only purchased songs sync

Do you have the songs in a Playlist.

Having trouble getting iTune Extras to work after the movie in iTunes 64

Having trouble getting iTune Extras to work after the movie in iTunes 64

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

Having trouble getting ipad 2 email to work

Having trouble getting ipad 2 email to work

Dave, you're not bothering us. I was just messing with you. No harm intended. I apologize. However, you do need to provide more information with regards to how you're having issues setting up your email. You may also want to check out the iPad manual: http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

I am having trouble getting sqlplus working on solaris 9 with oracle 10g

Similar Messages

Maybe you are looking for