I am looking for a high quality video converter from MTS or M2TS format to MAC...there are loads of softwares claiming they can do it but all turned out to be disappointing qualitywise...any idea?

I am looking for a high quality video converter from MTS or M2TS format to MAC...many softwares claim they can do it but turn out to be disappointing (low quality...).
Please advice if you know of any solution or serious test forums.
Thanks!

Also, you didn't say for what purpose you need them converted, but this thread might ofer a clue:
https://discussions.apple.com/message/21389296#21389296

Similar Messages

I have been typing notes in quickoffice, now when I try to open one file saved in there it says "error can't open" but all my other files open.. Any ideas??

Need this file back for my class!

Sounds like theres an error with the file, it happens.
Did you save it eslewhere or back up the ipad?

My ipod touch 4th generation, is stuck on the apple turn-on screen where you turn it on, but all you see is the apple. Any ideas on how to fix this?

my ipod touch 4th generation, is stuck on the apple turn-on screen where you turn it on, but all you see is the apple. Any ideas on how to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What sequence setting should I use for a High Quality Video Montage?

I am about to start a new project for a client using photographs only. I have two questions:
1. What should I use for the sequence settings? Should I edit with a HD sequence setting?
2. I am going to scan the pics myself. What Pixel or resolution is appropriate to get the best quality? I'm looking for wide screen 16 x 9, not 3 x 4.

First, decde how you are going to deliver this production to your client. Then tell us what that delivery medium will be. Then we'll have some advice for you.
See the section in the FCP manual on using still images. You need to understand that in video there are only pixels, no dots per inch or lines per inch. Those terms are meaningless in video. You wil sand at a size in raw pixels that is only slightly larger than your delivery format.
bogiesan

[solved] Looking for a simple YouTube video converter

Hello,
I am not a video expert and all my video editing is limited to converting my videos to a YouTube optimised format before uploading onto the platform.
At the moment I am using transcoder. However, I would prefer an other more minimal program which comes with predefined export profiles for optimal quality for YouTube.
Does anyone of you use a very minimal and leightweight converter which is sufficient for YouTube videos?
Regards
Last edited by orschiro (2012-11-28 21:40:13)

drcouzelis wrote:You only need to learn the optimal YouTube configuration for the crazy ffmpeg command line options once, and then you can just use that to convert your videos.
Since YouTube will re-encode anything you upload the best practice is to upload the original content. This isn't always practical of course, so you can re-encode it for a more manageable file size, but still high enough quality that it won't needlessly suffer when YouTube takes a dump on it. Here's an example that will work with ffmpeg from the repository, ffmpeg-1:1.0-2:
ffmpeg -i input -c:v libx264 -crf 18 -preset slow -pix_fmt yuv420p -c:a copy output.mkv
The two options of interest are -crf and -preset. The basic methodology when using crf is to use the highest value that still gives you an acceptable quality and the slowest preset you have patience for. See FFmpeg and x264 Encoding Guide for more information. This example will also simply copy the audio from the input to the output. If you want to re-encode the audio, such as if your input audio is uncompressed, replace "-c:a copy" with "-c:a libmp3lame -q:a 3" or "-c:a libvorbis -q:a 6" for a high-quality output.
skanky wrote:A search for ffmpeg and youtube brings up a few things that might do the job,
This might be do the job? - http://shahidhussain.com/optimize-video … th-ffmpeg/
That is a terribly outdated example: it resizes the video to 320x240, changes the frame rate, and uses 800 bits/s for a video bitrate. That's bits, not kilobits!

I'm looking for a high quality image of the flower in the iPhone 5 the website.

There is a flower that is used in the apple website, for the iPhone 5. It is purple and yellow. I've been looking all over the web for it but cannot find an image of it that doesn't have a glare on it. I guess it is owned by apple, but I was wondering if anyone knew where I could find a high quality image of it. Unfortunately it is not included with the iPhone 5.

Hi(Bonjour)!
I see on photo to movie spec page that you can export in full 1920 X 1080 H.264 codec, a high quality format usable in FCE.
http://www.lqgraphics.com/software/phototomovieoverview.php
By the way, how do you deliver your HD sequence from your mac to your HD TV set ?
Michel Boissonneault

Looking For A High Quality Connection For My Touch And My Navigation Syst.

Hey Everyone,
I have an AVN-7000 Eclipse navigation system in my car. It has several different inputs for things like ipods and video games. I'd like to know which is the best to use and if there are products out there yet for hooking my touch up to my deck. I know there is an "AV Input" which I assume is RCA, there is also optical and coaxial inputs, too. I want both the audio and the video to be sent to the unit. Just want to know which one I should use in order to get the best quality, and if there are products out there yet. Thanks in advance for you help!
Here is a link to the Eclipse product page:
http://www.eclipse-web.com/avn/avn7000overviews.html

Isn't there something that could convert the signal coming out of the ipod to optical? There are all kinds of docs that allow for HDMI output and stuff like that. Although I agree that the ipod touch doesn't have optical out, I think there might be a way to convert the digital out to optical. Is that wrong? Thanks for your help.

My Iphone 3 got water damaged in June so i have just got an Iphone 4s. When i have turned on Icloud etc it has updated all my notes from my previous phone on to the new one as it has also done with my contacts, but it hasnt done the photo's. Any ideas?

I have been into Icloud and under 'Storage & Backup' and 'Manage Storage', I can see that my last phone was backed up a day before it was broken. I just cant find the option to transfer that data such as all my pictures and videos onto my new phone. My Notes and contacts have just transferred automatically and strangely, my old photo's that were taken and assigned to certain contacts are now assigned to my new phone as was, but they dont appear in my photo library anywhere. What do I need to do?

Hello again. Just to let you know I have solved the problem. Backed up my new phone. Then wiped all settings and everything off it to start again. When it relaunches it gives you the option to download from Icloud and you can pick from which back-up date you want to download it from. Picked the one from the day before it got trashed and HEY PRESTO, we have all the pictures and videos back!!! Iphone 0 - 1 Voodooboy78
I'm sure people will look at this and be like duhhhhhh but to me it is a VICTORY over technology!!! Peace

I'm looking for a high quality teleseminar service for mac

i need a teleseminar service that fully functions with macbook. i've been told that gotowebinar can't be recorded on a mac. any suggestions from teleseminar producers?

Anything can be recorded that isn't copyrighted on the Mac. Look only as far as SnapZ Pro:
http://www.ambrosiasw.com/utilities/snapzprox/
If they give you permission to otherwise record copyrighted content with Windows, look at these methods of running Windows on your Mac:
https://discussions.apple.com/docs/DOC-2741

TS3276 My mail 4.5 doesn't recognize my user & pass anymore on my MacBook pro the same user & pass are recognized on my iPhone 4 & my iPad 2 but not my MacBook pro 10.6.8 any ideas...???

I keep getting this annoying message
when I know fo sure that the user & pass have been entered correctly & are being recognized by my iPhone 4 & my iPad2...
It never been a problem but for the last couple of days...
Has anyone have a clue of what's going on & how to fix it please...
Thanks
P-Y

No ability to access Mail on MacBook since 20th.
On Communities; there were a couple dozen similar problems, but only one post (that I saw; it takes a long time to sort through requests for help and then find help, it seems to me) that proposed solutions, which I tried with no result.
Failed to get resolution using Apple Troubleshooting instructions.
Used Chat & was told that I need to upgrade from 10.5.8 to Leopard (free to MobileMe account holders) & then spend $30 for Lion. The theory is that migrating from MobileMe to iCloud with my current OS is preventing mail from synching with MacBook. I don't know why this should suddenly be a problem. (No problems with Mail on iPhone3 or iPad2 or accessing through Safari/iCloud, true, but I migrated to iCloud four months ago.)
So far, three+ hours spent on this issue.
If anyone with this problem actually gets it fixed, I'd appreciated knowing before downlading Leopard & purchasing Lion....

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

How to export a complex Keynote to high quality video for DVD?

I have had dozens of attempts to turn a complex Keynote into a high quality video.
Either they turn out disappointiingly way low res
or they are very choppy with half the transitions gone
or they Cannot make the video at all
HELP.
I need to turn this project in to my client today.

If you use the DVD export in Keynote 3 with a self playing movie, the quality will be fine...just don't trust what you see on your mac screen, play it on a DVD player to check the quality. I did a test a while back and it was only the pauses that looked bad.
Read about it here:
http://www.keynoteuser.com/news/?p=135
pay close attention to what I complain about...it's just the slide pauses, not the normal motion playback, which means selfplaying stuff looks pretty decent (though never as good as the original, but that's the fault of the DVD format, not Apple).

Best Settings for YouTube's HIgh Quality Video

I see YouTube has a new "high quality" video option that uses H.264 video at 480 x 360. If I want to take full advantade of this format how should I build my videoo to upload? I assume I should use H.264, but Premiere doesn't have an option to do so at 480x360.

After numerous trials and extensive searches on forums (with solutions way too complicated for me) this is my recipe.
(After upgrading to PE 7 I hoped that PE would do the trick, but no.)
1. Premiere Elements.
Export ("Share") to harddisk, DV-AVI, 4:3 or Widescreen doesn't matter.
2. Windows Movie Maker.
Import this AVI-file. You won't need to change or edit anything.
Just "publish" (to disk) in
WMV-format, dvd-quality (4:3 size) PAL 3,0 M.
3. You Tube.
Upload to YouTube.
Then wait (approx 10 min. per minute movietime) until the uploaded movie is released and online in high quality.
Happy uploading!
Max size is 100 Mb; but there are work arounds for that too.
Felix

Can the MacBook Pro 15" Retina with 2.0 GHz processor handle editing high-quality videos?

Will the 2.0 GHz processor version be able to handle editing/exporting high-quality videos?

Welcome to Apple Support Communities
The processor can handle HD video editing without any issue, but the problem comes with the GPU, the Intel Iris Pro GPU.
That GPU is a bit better than the Intel Iris GPU included in the 13-inch MacBook Pro, but it is still not good enough for serious video editing. If you make videos as a hobby or it is not an important task for you, the MacBook Pro with the Intel Iris Pro GPU may be enough, because it works with HD vide editing. However, if you need the best performance, you need to go for the most expensive MacBook Pro, that comes with a NVIDIA GPU

IPhone High Quality Video Formats?

In our app we need to run a video that is high quality. Higher quality than the settings that quicktime pro presets output at. Does anyone know of what format settings I can use to export a high quality video to play?

I use 15 fps, because it looks better when used or converted into flash. If you just try uploading 30fps & 15 fps of the same file on youtube, you will see a change of the quality of the video.
I have never used the broadband settings for the FCP compressor .. But I will try it out.
my bad for the bump.
and I know that there are tons of post like this, but I was trying not to get this post into a huge discussion. I was just trying to get people to just post their specs just like I have. Then we could have 1 post that answered all the questions of the specs of what people use & then people wouldn't have to search through everything..

I am looking for a high quality video converter from MTS or M2TS format to MAC...there are loads of softwares claiming they can do it but all turned out to be disappointing qualitywise...any idea?

Similar Messages

Maybe you are looking for