I am only able to login to a certain website a few times and then I have to restart my computer. Mozilla doesn't seem to remember or allow me to login continuously. Help!! Very annoying....

I am an online student and have difficulty logging into my school. I am able to login only a few times before Mozilla stops me from being able to enter.

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

Similar Messages

  • Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

    Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

    ejwoodall wrote:
    It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
    Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
    I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
    The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
    If your machine performs flawlessly, it may be a router issue.
    If your machine has connectivity issues there, it may be a hardware problem with your machine.
    There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
    But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
    In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

  • When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

    When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

    I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
    I saw this report being sent to Apple:
    Interval Since Last Panic Report:  581719 sec
    Panics Since Last Report:          10
    Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
    Fri Mar  7 13:00:14 2014
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
    RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
    RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
    R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805e5f3a00 : 0xffffff8000204d15
    0xffffff805e5f3b00 : 0xffffff80002d1208
    0xffffff805e5f3c50 :
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

    Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

    If they aren't on icloud.com they are no longer in iCloud.  If you don't have another backup, I'm afraid they're gone.

  • I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

    I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My macbook pro will not let me change my background or screensaver. It only shows a pinwheel and then I have to force quit. HELP!

    My macbook pro will not let me change my background or screensaver. It only shows a pinwheel and then I have to force quit it! HELP.

    Sounds like one of your preference (.plist) files are corrupted.
    See #12/#13 Step here
    ..Step by Step to fix your Mac
    Deleting the System Preference or other .plist file

  • So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

    So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

    Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
    Come on Apple get your finger out and help us here please ?

  • Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

    Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

    <u>'''Anonymous'''</u>
    Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
    <u>'''chris'''</u>
    <u>'''''Crashing'''''</u>
    See:
    http://support.mozilla.com/en-US/kb/Firefox+crashes
    http://kb.mozillazine.org/Firefox_crashes
    http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
    http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
    http://support.mozilla.com/en-US/kb/Firefox+will+not+start
    http://kb.mozillazine.org/Browser_will_not_start_up
    ''<u>'''Hanging'''</u>''
    See: http://support.mozilla.com/en-US/kb/Firefox+hangs
    <u>'''''Hanging at exit'''''</u>
    <u>'''Kill Application'''</u>
    In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
    See: [http://kb.mozillazine.org/Kill_application Kill Application]
    '''<u>Causes and solutions for Firefox hanging at exit:</u>'''
    [[Firefox hangs]]
    [http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
    [[Firefox is already running but is not responding]]
    ''<u>'''Safe Mode'''</u>''
    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes <u>'''before'''</u> starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling <u>'''one at a time'''</u> until the problem reappears. <u>'''You MUST close and restart Firefox after EACH change'''</u> via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    <u>'''chris'''</u>
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.
    <u>'''NOTE:'''</u> Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. <u>'''''At this time'''''</u>, the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; <u>'''''at this time'''''</u>, it must be manually downloaded and installed. According to the Java release notes:
    ''"'''Bug Fixes'''''
    ''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
    <u>'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)'''</u>: your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    -exit Firefox (File > Exit)
    -''<u>In Windows,</u>'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -''<u>In Windows,</u>'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
    -when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
    <u>'''Update Shockwave for Director (aka Shockwave Player)'''</u>: your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (<u>important security update released 2010-05-11</u>; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
    NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
    <u>'''You '''</u>~~red:<u>'''MAY'''</u>~~<u>''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)'''</u>: your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
    ~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
    See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
    ''<u>You may be able to update from the Adobe Reader installed on your system</u>'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
    ''<u>If you go to the Adobe site to download the current Adobe Reader:</u>''
    -'''<u>use Firefox to download</u>''' and <u>'''SAVE to your hard drive'''</u> (save to Desktop for easy access)
    ~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
    -exit Firefox (File > Exit)
    -In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
    -In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
    *<u>'''NOTE: On Vista and Windows 7'''</u> you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
    *'''<u>NOTE for IE:</u>''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
    *Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

  • HT1212 My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

    My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared  I have an IPhone 5.  Has this happened to anyone before?

    I was on a website all of a sudden my screen freezes I was able to get out of that screen after a few second and then noticed all my app icon disappeared  I have an IPhone 5.  Has this happened to anyone before?

    That is very strange! Have you been able to get your apps icons back now? Have you attempted a soft reset by holding the power button and home button at the same time until the phone restarts? Keep me posted with the results!
    BryanS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

  • Firefox won't close down all the way after watching a video. I exit out, and the sound continues. When I try to re-open firefox, I get a message about how I have to restart my computer. How do I fix this?

    Basically whenever I watch a video and I exit out of the video I have to restart my computer to get Firefox back open. If I exit out or go to a new page while the video is playing, the audio continues like nothing has happened. I've checked my task manager and it shows that Firefox is closed. When I try to re-open Firefox I get an error message that tells me Firefox is running but is unresponsive and I have to restart my computer. How do I get it to stop doing this?

    Try holding control, alt and delete down in succession and then a dialogue box will appear with windows task manager. Once open click on the Processes Tab and look for firefox.exe. Highlight this and then click end process. It should come up with a warning but just click Yes. This should then close firefox and allow you to reopen it from your desktop without shutting down your computer. Hope this helps.

  • Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even downlode my music or watch my movies! what is going on?

    Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even get my music on it or watch my movies! what is going on?
    A box will pop up and tell me there is a new version of itunes to download, but i'm un able to click on that either

    Hi Coreenfrombc,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

    When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
    I have been playing whole movies before from VLC without problems.
    Any Ideas?

    Welcome to the Apple Community.
    Yes it's network issues or settings that cause these types of problems most of the time.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Maybe you are looking for

  • KT3 Ultra Aru xp2400?

    Hi I have been building my new PC for the last few month now it need 1 part a cpu. will the new AMD xp2400 be compaterble with my MSI KT3 Ultra Aru v1.0? if not what is the highest cpu it will take Thanks in Advance Widowmaker   KT3 Ultra Aru Coolerm

  • IBM WPS: Error While Creating App and Int Server Connections in JDev 10g

    Hi, I have been struggling to create App Server and Int Server connections in JDeveloper 10.1.3.4 without any luck. The JDeveloper is present on VM ware machine from which I'm trying to establish the connections to remote server where SOA Suite 10g i

  • Can I install Windows 7 from a USB stick even though I have the Superdrive?

    I have an iMac 21.5inch from Mid 2010 and it currently runs Snow Leopard 10.6.8. I have just purchased the upgrade to Mountain Lion but I have not received the code to install it yet. When I do install it, I'm planning to dual boot my iMac to have Mo

  • HTTPService call not working

    I am not able to call the url for some reason. When i click on submit it says in the browser status bar 'Waiting for localhost...'. The swf file is located at 'http://localhost:8080/web/main.swf' so its on the same domain. Heres the code. <?xml versi

  • NetConnection using POST requests to retrieve data

    Hi Everyone, I've noticed that when I use NetConnection.call(methodName) in my client Actionscript it sends a POST request off to the server. I thought this was odd because requests for data are normally GET operations but I didn't worry about it bec