I am only allowed to pin one app tab. How do I pin as many app tabs as i want?
I can't pin more than one app tab. How do i pin more than just one?
Change iTune Store
http://support.apple.com/kb/HT1311
Similar Messages
-
I need to lock the iPad or Itouch down so only one application is running or available to start. One, for ease of use by a 3 year old and two, in order to make the use of the iPad as an AAC device allowable in a classroom setting. There is concern that the other games, etc will be a distraction.
Thank-you!You can enable Restrictions, also known as Parental Controls, on an iPhone, iPad, or iPod touch to prevent access to specific features. This article provides an overview of the types of Restrictions that are available, as well as how to enable or disable Restrictions on your device.
http://support.apple.com/kb/HT4213 -
My ipod headphone jack is only allowing sound in one headphone. i tried multiple headphones to make sure it wasn't the headphone but the jack itself. i have a ipod video 5th generation.
Had you brought the same pair of headphones to the Apple Store with you and they worked there? If you hadn't, the wire or plug on those headphones may have failed. Try a different pair if you can and see if those work.
Hope this helps -
when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?
when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?
-
Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".
Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum? -
"Run only allowed" GP prevents zen apps
I've just started to experiment with restricted Windows Group Policies an ZMC 10.3. I cant seem to get any restricted applications to run from the nal window like they did in zen 4, 6, or 7 while using the "Run only allowed windows applications" group policy setting.
Before I only had to allow nalwin.exe and nalshell.dll but this no longer appears to work. Other people have posted this issue with versions as new as 10.2 and the "fix" was to allow nalshell.dll but I've already done that.
What am I missing? I dont actually get the usual restriction message like if i tried to run an program from the start menu that isnt allowed, but instead zen give an unspecified error. The apps run just fine using a GP that doesnt have "run only allowed" set.
Any help is appreciated.I think it would be difficult to get a bug created that said:
"ZCM honors Windows Security Policies"
It was certainly never the intentional design to allow this.
Rogue Process Mgmt was the tool to perform the feature you are
describing in lieu of using the Microsoft GPO.
I'm not aware of any products that do or would advertise this feature,
since a security patch could fix it at any time.
The best bet would be to use file rights to actually control what user's
launch in combination with limiting where programs can be launched.
(Such as from %ProgramFiles%, etc..)
On 6/14/2010 1:56 PM, jkillebrew wrote:
>
> Does this still have something to do with changes in 10.2?
>
> Im not sure how its a security issue, but it certainly works well for
> us, allowing us to restrict users to only run applications from within
> the application window and nothing outside other than a very limited
> list of applications defined by the GP which would include things like
> nalwin.exe, antivirus related items, and maybe office applications that
> would need to be opened by file association.
>
> The greater security hole is that this policy can be defeated by
> renaming a program to the same as something allowed since it works by
> the file name, but students dont know that and dont know what files I
> have allowed so it hasnt been a problem so far.
>
> Thanks for any help you can provide. I'd really like to use ZCM but
> this is going to be a deal breaker for us if we cant get it working. We
> are already struggling to remove duplicate usernames across different
> OUs to support ZCM (makes no sense not to support this if edir allows
> it) so this is just another major stumbling block.
>
> BTW, there are numerous examples of this type of use of GP and zen all
> over the place. People have posted examples on their blogs and I even
> read a cool solutions article suggesting this setup, though this was all
> with 7 or older.
>
>
> craig_wilson;1987251 Wrote:
>> I actually misread your earlier posting.
>>
>> I thought you were having an issue launching the ZEN Components
>> themselves, rather than the the Windows Policy Locking preventing the
>> launch of Apps from NAL.
>>
>> I was not aware that ever worked and am a little surprised it ever
>> did.
>> In fact, I would consider it a fairly significant security hole in the
>> Windows policy that I did not know existed and would be concerned
>> about
>> trying to exploit it.
>>
>> I know ZDM had it's own version, called Rogue Process Management, but
>> that does not exist in ZCM. It may be possible to try and create an
>> enhancement request to get this feature re-added.
>>
>> In 10.0 that shipped, this feature would not really have worked the
>> way
>> ZCM was designed, but could at least work in theory now.
>>
>>
>>
>> On 6/14/2010 11:46 AM, jkillebrew wrote:
>>>
>>> I cannot get approval to open a SR because this isnt in production.
>> We
>>> are just trying to migrate our existing policies over from zen 4& 7
>>> with XP to similar policies using zen 10.3 and Windows 7 to see if
>> we
>>> can possible stick with Novell or if we have to move to a new
>> product.
>>> We must keep restricted policies in place because we use this for
>> K-12
>>> schools where students are malicious.
>>>
>>> So far the only fix is to add the application to the allowed list in
>>> the GP every time we create a new app which would be a huge pain the
>>> butt and would cause great delays in getting new apps deployed since
>>> have to wait for the GP to propogate at login while the app would
>> often
>>> arive ahead of the new GP. This would also allow everyone to run the
>>> application even if they dont have that bundle, unless we are going
>> to
>>> start managing more granular GPs, maybe hundreds of separate ones,
>> and
>>> we would have to keep notes on what GPs have access to what
>>> applications. I'd move to another product before I'd go that route.
>>>
>>> It should be fairly easy to recreate i think.
>>>
>>>
>>> craig_wilson;1987169 Wrote:
>>>> There was a change in ZCM 10.3 in how some of the ZCM Processes
>> Launch.
>>>> They are no longer child processes under explorer and they are
>>>> actually
>>>> started by one of the other ZCM services.
>>>>
>>>> It is possible that this could be related to the issue you are
>> seeing.
>>>>
>>>> Just be sure to let me know if you can't create an SR, because I
>> may
>>>> use
>>>> spare time to try and dupe and follow this up.
>>>>
>>>> However, my preference would be me to try and follow an SR you have
>>>> created.
>>>>
>>>> Just let me know.
>>>>
>>>> On 6/14/2010 10:26 AM, jkillebrew wrote:
>>>>>
>>>>> Thanks for the suggestion. At least one person with 10.2 had it
>>>> working
>>>>> according to another thread on this forum so I was hoping it was
>>>> just
>>>>> something simple. Unfortunately I think we have to pay per
>> incident
>>>> so I
>>>>> cant open a CSR.
>>>>>
>>>>> I tried Procmon on both a pc with and without restrictions and
>>>> compared
>>>>> line by line but they seem to be identical. Something is happening
>>>>> within Zen that isnt showing up on procmon and i dont know how
>> else
>>>> to
>>>>> see what is going on by hind the scenes.
>>>>>
>>>>>
>>>>> craig_wilson;1987046 Wrote:
>>>>>> If you are able to open a Service Request, I would recommend
>> doing
>>>>>> this.
>>>>>> I am not sure if the Agent is tested with that policy, but I
>> think
>>>> it
>>>>>> would be a good idea to get an official method documented.
>>>>>>
>>>>>> In the mean time, I would recommend trying the following........
>>>>>>
>>>>>> Disable the Policy and configure PROCOMON to run from startup.
>>>>>> Use this to see what processes and items launch and run.
>>>>>>
>>>>>> Try adding those items to your list.
>>>>>>
>>>>>> (Note: If you can and do make an SR, please drop me a note at
>>>>>> Craig_d_Wilson at Yahoo, and I will make sure it gets into the
>>>> hands
>>>>>> of
>>>>>> somebody who understands the issue.)
>>>>>>
>>>>>> --
>>>>>> Craig Wilson - MCNE, MCSE, CCNA
>>>>>> Novell Knowledge Partner
>>>>>>
>>>>>> Novell does not officially monitor these forums.
>>>>>>
>>>>>> Suggestions/Opinions/Statements made by me are solely my own.
>>>>>> These thoughts may not be shared by either Novell or any rational
>>>>>> human.
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Craig Wilson - MCNE, MCSE, CCNA
>>>> Novell Knowledge Partner
>>>>
>>>> Novell does not officially monitor these forums.
>>>>
>>>> Suggestions/Opinions/Statements made by me are solely my own.
>>>> These thoughts may not be shared by either Novell or any rational
>>>> human.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Hi! I'd like to RDP in to a Win server 2003 computer from my new Windows 7 (x64) computer. There's no problem to connect but the connection only allows me to use 16 bit color depth on the Windows server 2003 client. The program I want to use on this computer requires at least 24 bit to run.
I've googled around and tried it all:
-setting the color depth to 4 or 5 through regedit (on both computers)
-creating a Group Policy object-snap in through mmc
-reading endless of forums but no one has had the same issue as I
My question. If all the ordinary solutions isn't working what could the issue then be? My only suspision at this point is the the RDP-client on Win server isn't working properly. The Windows Server 2003 client is fully updated machine and it should have the RDP 5.2-version installed but I can only find 5.1. Could this be the issue? That it needs to be 5.2 to properly communicate with a win7(x64)? If so, how can I upgrade solely the RDP-client since it seems not to have followed with the Automatic Update as it should?
All answers and feedback are very much appreciated!
Many thanks
FrankHello Frank,
Thanks for your feedback and the test.
I still recommend you to check the local group policy setting “Limit maximum color depth” on the Terminal Server side. Based on your description of Group Policy Object Editor, I suspect the loss of Terminal Services folder is caused by system.adm file not loaded successfully. Please try to fix it via the following steps:
1. Open Group Policy Object Editor (run “gpedit.msc”) on the terminal server.
2. Expand Computer Configuration \ Administrative Templates
3. Right click Administrative Templates folder and select Add/Remove Templates, if system is not listed in the panel, go to Step 4; If it is, remove it and go to Step 4.
4. Click Add button.
5. In the next phase, it is Windows\inf folder, if it is not, please navigate to the folder. Select system.adm file and click Open.
6. Check if the Terminal Services folder appears under Windows Components now.
Thanks for your cooperation and we’re looking forwards to the result. Thanks.
Regards,
· Lionel Chen -
Is it possible to allow to run one app only?
Hi, I'm going to use iPad as a touchscreen for Avit automation system ( http://www.comm-tec.de/englisch/CommandFusion.html?sid=TT6cVtRXhCUAACjoJ6s ). I will have iPad in the cradle, and I would need to run only the iViewer app, disable all other apps, and to run it automatically after the device is turned on. Is this possible? Thanks
Sorry, but no, it would not be possible to develop an app that could prevent someone from being able to just press the Home button to quit your app and/or to block other apps from running. The developer kit doesn't allow that level of access to the OS.
Perhaps an Android-based tablet would allow this sort of functionality. I have no experience with the Android developer kit, but from what I've read it's a lot more open to low-level access and modifications (which consequently is making the Android devices more prone to malware). I doubt it would be something that would be easy to do, but it might be possible.
Regards. -
JSplitPane (only allow collapse in one direction)
Is there a way to allow the JSplitPane to only collapse in one direction. For instance my application use a JSplitPane and it should only be able to collapse to the left (hence I need to remove or disable the little arrow that points to the 'right' since that would screw things up). Any ideas?
pamelak855 wrote:
Helllo. I hope someone might have an answer. All of a sudden, my network magic is only working in one direction. I can access shared folders on my desk top from my lap top, but cannot access my laptop's folders from my desktop.
The desktop is Windows XP. The Laptop is Vista 64 bit. NM version is 5.5.9195.
This had previously been working fine. I went thru Norton on both comouters and changed the settings as per the firewall troubleshoot section.
Please advise. Thanks!
Pam
Hi Pam,
Check the settings on the Vista 64-Bit Laptop, in Network and Sharing Center. Make sure that when you upgraded Vista, that the settings did not changed from Public.
Also, make sure that the folders being shared are existing only on the Internal Hard Drive and not on any External Hard Drives, plugged into the computer via an USB Cable.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router. -
Dear community members,
I'm new here. I have a question about searching ebooks in itunes search API.
If I know ISBN of one book, either 10-digit ISBN or 13-digit ISBN, how could I know its ebook ID in itunes store?
In other words, is there any rule that I could convert regular ISBNs to ebook IDs? Or where I could find the reference?
Thank you.Try searching Amazon or Barnes & Noble or your local library, if they have an online search, for the ISBN. That will give you the title of the book so you can then search the iBooks store. Or just buy the book from Amazon or B&N as a Kindle or Nook book; both have viewers for Windows and Mac as well as iOS devices.
Regards. -
Clicking a .gif file only allows save or save as. How do you get it to open in new tab?
Doesn't appear in Options > Applications and there doesn't seem to be a way to add the filetype.
That image works for me and opens in a tab if I click the link on that page with the current Aurora build.
That file is send as image/gif and Content-Disposition: inline; filename*=UTF-8''BBCode
<br />
Firefox shows image.php in the title bar, but if I save the image then I see BBCode.gif for the name.
If you get the save file dialog then that might be caused by the image.php name that you see if you click the image to open it in a tab.<br />
Do you have any action for the php file type?
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.com/kb/Managing+file+types -
Selective dataroaming for only one app
Is it possible to only allow dataroaming for one app? While the rest of your apps on the iPad can't use dataroaming?
No, sorry, that is not possible.
Regards. -
i downloaded an album on itunes using my new itouch; but it's only allowing me to put three songs at any one time into the music app...how can i get it to just move them all in there?
hi philly, thanks for getting back to me, especially on such a busy day.
I don't think that's quite the issue though. I bought an album and it appears in 'my purchases' within the itunes app. Yet, in order to listen to the music, i must use the 'music' app and in this application, there are only three tracks displayed at any one time from my downloaded album.
I can 'download all' from the 'my purchases' section but that still doesn't help, it just keeps the last three tracks downloaded in the music app.
I have the 'icloud' enabled and wondered if it had anything to do with that.
i have successfully downloaded another full album totally into the music app, but this first album is causing me problems. -
Developer Application Provisioning Issues -- Only one app at a time?
_The upshot:_
You can have one and only one developer provision and developer application on the iPhone at a time otherwise you get installation errors (i.e. 0xe8000001).
_To fix:_
Use Xcode Organizer to ensure that you have one and only one application and provision installed to the iPhone that uses your developer certificate.
_To any Apple people:_
If I am wrong about any of this, please let me know. I have wasted 3-4 days over the past 2 weeks due to these issues, and any explanation would be well received! Having one and only one application and provision installed to the iPhone fixed the 0xe8000001 issues for me.
_Long winded explanation:_
It turns out that I am working on multiple iPhone applications at the same time.
Each application has a different AppID (as registered on the iPhone Developer Portal).
I have spent quite a bit of time having major issues with Developer Provisioning and application installation from within Xcode and Xcode Organizer, which led me to not be able to debug my application on a live iPhone.
I finally discovered my problem: I can only have one app and one provision on the iPhone that uses the same developer certificate.
When swapping between Xcode projects if I remove all provisions and applications using Organizer and re-add only the provision of the application I am working on, then the install errors at build time go away.
Samples of install errors that manifest themselves using the 0xe8000001 code:
Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: entitlement 'application-identifier' has value not permitted by provisioning profile
Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: verify_executable: Could not validate signature: e8008016
-- Taken from the Xcode Organizer Console window for my development iPhone --
These errors seem to be occurring because of an install time check against the installed provision files to verify the app, and it seems the provision from an already installed application is being used.
This is probably occurring because the main developer certificate has to be the same between the 2 applications. As the scan through the provisions is occurring, the certificate of the new app matches the certificate from the already installed app, and the provision check fails due to different App IDs.
There is one and only one developer certificate allowed per iPhone Standard program.
I hope that this helps some other people out there with their development provisioning and debug / installation errors.
--BatgarThis is why you should create a wildcard developer certificate (com.youcompany.*)...follow the directions in the program portal. Then you can then install all your apps on your phone.
-
My pages app is only allowing me to type in CAPS. How do I get it back to normal?
My "pages" app is only allowing me to type in uppercase. How do I turn that off to type with upper and lower case?
Wow! That's a new one. Try quitting Pages and then reset your iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Maybe you are looking for
-
I no longer know the password to the old iCloud account or email. It asks to turn off Find My iPad, I also don't know that passcode. Yes, I know I need to keep track of things. I JUST WANT TO RESET IT LIKE IF I HAD JUST PURCHASED IT WITHOUT IT REQUIR
-
Others seem to be in the same boat, but I'm hoping pasting my crash log will help out my sitch. Process: Motion [42314] Path: /Applications/Final Cut Studio ƒ/Motion.app/Contents/MacOS/Motion Identifier: com.apple.motion Version: 4.0.0 (687) Build In
-
Why do I need to Reformat Disk for TM?
Have a new 24" IMAC, running 10.5.2. I have a hard drive that still has 400-500gigs left. When I plugged it in the first time to move images onto my IMAC, Time Machine gave me a warning that in order to use it as the back up drive I would have to ref
-
Does Oracle have a Public Key Server platform? If not, what would you suggest to use to make one? I have looked into the follow platforms and I have some concerns about each: http://pks.sourceforge.net/ https://bitbucket.org/skskeyserver/sks-keyserv
-
Can you please restore the "would you like to save your tabs" option?
Until today I was using firefox 3.6 because I liked the style and way it operated, but I had to update because most sites I was using wouldn't let me access them anymore. One of the things that was my favorite was the save tabs option. When I'd open