I am persuing M Tech in Cad cam and I wish to do job in core area only , then which SAP module is useful for me as a fresher?

I am persuing M Tech in Cad cam and I wish to do job in core area only , then which SAP module is useful for me as a fresher?
<<Moderator: Multiple postings are not allowed>>
Message was edited by: Ravi Sankar Venna

Hi Nishant,
Welcome to SCN.
Questions like these have been asked many times in these forums. I suggest you search for relevant information and if you are not satisfied, then post a specific question.
Also, spend some time reading the The SCN Rules of Engagement
pk

Similar Messages

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

I agree - it's all about preference. I use the ThinkTank Retrospective 7. I *love* ThinkTank's attention to detail... everything from having a rain cover included with the bag, to having ingenius use of velcro (sp?) patches to enable you to "silence" the bag so it doesn't make the big "SCRATCH" sound when opening the bag during a quiet event, etc.
My best advice would be to do your research (which you're clearly doing) and have a clear understanding of the return policy wherever you buy it, and then don't be afraid to return it if you get it and feel it doesn't meet your needs. A restocking fee is a small price to pay to not be stuck with a bag that doesn't work for you. And if for any reason you get it and can't return it, there's always eBay.

My iPad has suddenly lost my camera and FaceTime apps. I've tried to go into the restrictions however it is asking for passcode I never set up. Then I've tried to do a reset but it to is asking for a passcode that I never set up.

MY iPad has suddenly lost my camera and FaceTime apps. Yes I've tried to modify in the restrictions however it is asking for a passcode that I never set up. I've also tried to go and reset my iPad but it to is asking for a passcode. Yes I've tried any passcode I've ever used. And I can't get anywhere. Help!

iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Follow the section for recovery mode restore.

Which codec should I use for web cam capture?

I've got my new Live! Cam Voice up and running with my PC. It captures audio and video fine but when I load the video into Adobe Premiere for further editting, Premiere doesn't seem to like the codec I'm using (WMV-Window Media Video). Inside Premiere the video does not seem to play at full frame rate and when I render out an export (to an QuickTime .mov for example) also seems to be having trouble converting the WMV input to that format or any format for that matter.
Any suggestions? Thanks.
Message Edited by Castaa on 07-16-2006 05:34 PM
Message Edited by Castaa on 07-16-2006 05:36 PM

solace wrote:
Hi...
Which recording quality setting was used? Best quality? or any of the preset options listed? Alternati'vely, you might want to try the I420 color format. This can be selected within movie maker.
Hi,
I'm capturing video using the Windows Media Video (.wmv) using the high quality setting (640x480). I think pixel capture problem I discribed above might be releated to hard drive access while the camera is capturing. Compression is set to I420. Same problem with the other option (RGB 24).
Here is a picture my corruption problem:
*** http://home.pacbell.net/jcortel/corruption.JPG ***
This problem happens randomly about every minute (on average) of captured video and only for a frame. The discolored line appears at different heights in the frame and it sometimes thinker than this example.

Red camera and FCP 5

is there any way to shoot using the RED camera and import the footage or transform the footage into QT then import, into FCP 5?

Not FCP 5.
You need FCP 6.
Might check:
http://reduser.net/forum/index.php
Specifically:
http://reduser.net/forum/forumdisplay.php?f=18
and a post similar to yours:
http://reduser.net/forum/showthread.php?t=22911

I want to be able to download pictures from my camera and caption them. Is this possible with any known app for iPad2?

I want to be able to download pictures from my camera and caption them on my iPad2. Is this possible? Having trouble finding an app for that...

I believe the iPhoto App can add captions to photos.

Help on interface to store CAD/CAM drawings into oracle database using form

i am using forms 6i and oracle 8i. i am able to store .jpg and other picture files into data base.now my problem is how show and store the CAD/CAM drawings using forms. can any one help me please. is higher version is providing any new facility for this purpose?
thank you

thanks for your help.
i am using client/server based application and cad/cam software was also installed on it. helper application means, the cad/cam software should provide some controls to view the drawings in other applications? am i correct.

How to convert CaD-Cam Maps(PDF) to Flash Animation

Hi,
I am very new to this area of technology and have no clue as how we can convert CAD-CAM Maps (saved as PDF file) into Flash. I have a requirement to convert those maps into flash files and embed these files onto a portal.
Please suggest if you have any ideas.
Thanks,
Techie

Hi,
I am very new to this area of technology and have no clue as how we can convert CAD-CAM Maps (saved as PDF file) into Flash. I have a requirement to convert those maps into flash files and embed these files onto a portal.
Please suggest if you have any ideas.
Thanks,
Techie

CAD/CAM (mechanical) software for Apple

My grandson wants to do mechanical design on his IMac. Since he's an Apple man he doesn't want to switch to PC to get capability. Are there any inexpensive Cad/Cam (mechanical design) software programs for Apple?

Another software which has educational pricing is Form-Z which is a 3-D/2-D modeling and drafting software. None of these first few programs are that easy to use, but with some diligents and reading through tutorials or guide books almost anyone can do it.
Here is the list as I know them...
a) VectorWorks (previously mentioned by Geroge)
--> http://www.nemetschek.net/
b) Form-Z - I have used this for many years in a professional architecture office (I know they have educational pricing)
--> http://www.formz.com/
c) ArchiCAD by Graphisoft (know friends that have used this in professional office)
--> http://www.graphisoft.com/
d) TurboCAD (http://www.macworld.com/news/2005/06/07/turbocad/index.php)
--> http://www.turbocad.com/
e) PowerCADD
--> http://www.engsw.com/webpage_content.html
f) Maya for OS X by Alias (very powerful but mostly used for animation/vsual effects)
--> http://www.alias.com/eng/products-services/maya/new/index.shtml
and here are some other searches that I have done that are very good...
--> http://www.pure-mac.com/cad.html
--> http://www.cadoutpost.com/catalog/drafting.html

Optimizing a cad/cam application

We have rolled out the 512 wae's to the edges and 7326 wae's to the core and having an issue with a cad/cam app as it's very slow...Does anybody have any experience with "taming" a cad/cam app in the wae's?
thanks..

If the files are accessed using a CIFS share, or via NFSv2 (neither sound like they are the case, but CAD/CAM applications typically involve accessing a file share), we can provide latency reduction, caching, and protocol optimizations, which dramatically increase performance of accessing packages and files contained within packages without compromising coherency. DRE will minimize the transfer of repeated chunks of TCP data and should be very effective with CAD/CAM files as they are uncompressed and contain repeatable sequences.

Solid Modeling (3D Cad/Cam)

Id would really like to have a decent solid modeller on arch, does anyone have experience with the available Linux solid modellers?
These are the ones I've found and my thoughts...
freecad... If I could manage to compile it was unusable do to various bugs
graphiteone... no archlinux packages, other packages don't seem to work on arch (wrong unicode encoding in python)
varicad... havn't tried it yet, but looks promising
medusa4... downloaded installer, I'm dubious about installing it however as it uses its own graphical installer
gcad3d... no x86_64 version
proeng.. I'm not 100% but it looks like they have discontinued the linux version
brlcad.. trying it out now, first thought is that it seems a bit complicated...
any thoughts?
Cheers
Last edited by Grazz256 (2010-01-29 15:41:23)

Catia and SolidWorks are owned by Dassault and going forward, they are only offering support on Windows. Older version of Catia V5 run on Solaris, but not Linux.
As for ones on Linux:
I've used VariCAD and it's good to a point. If you need to make simple static models, then you're fine. The last time I checked, VariCAD does not allow for kinematic constraints, which makes it difficult (but not impossible) to make moving models. The student version is only like $100 for a year licence, so it's fairly economical.
I've tried for a long time to get freecad installed but I always run into compiling errors as per another one of my threads.
BRLCAD is an option, but I haven't used it in depth. I know the US Army uses it, so it cannot be that bad.
ProEngineering Wildfire 3 runs on Linux, but it is outdated as Wildfire 5 is the current release (I think) but is only available for Windows.
I've never heard of/tried medusa4, but don't I wouldn't worry about a program that has it's own graphics installer. Matlab does and runs on Linux just fine.
If you are doing intense CAD stuff, you should probably be in windows using Catia, SolidWorks, ProE or AutoCAD

I have a lumix GH3 camera and I am trying to edit but I get poor playback when effects added?

I am using a Lumix GH3 camera and recording in .mov at 50fps progressive and 50mbps. My computer is a macbook pro two years old with 2.2ghz intel core i7 and 8gb of ram (1333 MHz DDR3).
The footage plays fine in the editing suite until I add an effect then the playback is extremely slow and jerky even after render. Does anyone know what I'm doing wrong? I am new to PPCC and I've just moved from FCP 7 as it didn't recognise the footage at all.
Cheers for any advice

There is a list of approved graphics cards for Premiere Pro. http://www.adobe.com/products/premiere/tech-specs.html
Your card is on the list as an OpenCL compatible card. You need to make sure that your card is recognized by Premiere Pro and that you have your settings right in order to take advantage of it.
http://www.youtube.com/watch?v=F3LwNT1QUPQ

Actor/Writer must purchase a video camera and mac computer. Please help!

I'm an aspiring actor who has decided to purchase a camera and mac computer. I decided this after much contemplation regarding my current situation. I'm leaving too much in other's hands by holding out hopes to use student film footage for my reel. The truth is, of the student films I've acted in, the quality of each film is mediocre at best. I'm not comfortable with the idea that putting my best foot forward with agents and managers submission packages (headshot, resume, reel, letter) will be these films.
The bottom line is, I want to take full control of the situation. And by doing that, I want to purchase a camera and mac computer to edit and burn the footage with (writing my own scenes, gathering Boston and NYC based actors via Craigslist). I should add that my desire to buy a camera goes beyond creating my reel. I also have a strong interest in putting together some short films I've written.
I don't know much about cameras, so I guess the first question is do I get a standard or HD camera. Also, do I opt for something like a Canon XL2, or aim for something under a grand? A good friend mentioned once that if I wanted to start shooting films to submit to festivals, then to go for a XL2. How long would it take me to learn how to use said camera? What would the difference be if I aim for something under a grand quality wise? If I don't get such a pricey camera, than I'm looking at a mini dv based camera.
I want to do my full on research before I invest in anything. Price is not an issue. Everything is going on credit cards and I want this to be the main focus on my life. My reel and my short films. With the reel coming first.
As for a mac, I'm thinking about a macbook pro, unless anyone here suggests otherwise? It has to be a laptop for when I move back to Manhattan in the fall with my finished reel.
Any and all comments are greatly appreciated in advance. Feel free to ask me any follow up questions if you need more info to make a suggestion.
A huge thank you in advance. Cheers.

Dear Blair:
Because you and I are in similar
circumstances, I decided to add
your thread to my active list.
You can see my writing in Goat's
thread, "choosing a camera," to
recognize the similarities and
differences in our positions.
In a nutshell, I am gearing up
for music video production, both
custom order for bands and for
cable release.
I can tell you a couple of things
about ordering your Mac Pro.
Most everything has already been
taken care of by Mac, but be sure
to option the 7200 rpm hard drive.
The price diference is negligible,
but the recommendation regards
audio quality.
Second, be sure to get the 4mb
L2 cache, not the 2mb. I think 4mb
is standard, but check it out.
The reason is that with long runs,
the cache does not have the chance
to refresh itself as often as it
would in, say, web surfing, where
you stop and go frequently. I was
uncdertain about this when I ordered,
but fortunately, the machine came
thrugh with a 4 mb L2.
I thinnk you are all right ordering the
MacBook Pro at this time. I have no
regrets. Still, there are things to
be considered, and that's where I am
right now. So, see the thread and keep
in touch. There are a couple of outstanding
contributors to the thread, ian and integron,
to name two.
In your field, post dubbing is going to
be very important to you, am I right?
To get the best quality you want a
synced scratch voice track and capacity
to improve it in the studio. So, in
your search, be sure your rig supports
true voice overs, meaning, you can listen
to the original audio while watching the
action, and over dub a studio quality
track. Remeber, everytime the cameraman
moves the camcorder, the mike moves. You can
see the problem.
In my case, music video, live, I want
a separate audio master, which goes into
the release track along with effects and
narration, and that master has to be good
quality and consistent level. Got me?
In your case, what they call a scratch track
is the basis for later studio reproduction,
I mean, you watch the picture and lip sync the
words.
You mention camera and that is what we are
talking about in the thread mentioned. I have
used Adobe Premiere, so I assume Final Cut
is going to do the job. I did add Final Cut
Express to my Mac order, and it came in the
package as a CD, for an extra $80. I think
it will have been worth it.
So, those are the only three options I asked
for when I ordered the Mac -- the cache, the
HD speed, and the FCE.
Like you, I am looking at the Canon and the
Sony tape storage. Before I jump. I want to
be danged sure the MacPro will support editing
functions. We are discussing now the CCD vs.
the CMOS and there are several issues. I am
hoping to shoot Hi Def wide screen original,
loking ahead. I don't htink that may be an
issue with you. As I see it, you want to basically
demonstrate your talent. However, editorial
ease and control should be an issue with you.
Remeber, the studios are run by very conservative
people, so you might lay low on the tech dazzle
and pitch to the fundamentals of acting with
a nuts and bolts presentation they are more
likely to respond to as opposed to drawing
attention to the technology, which to them
simply represents more unwanted investment.
Best wishes,
Ed Shaw

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

deactivate (help>deactivate) on your old hd.
then install using the installation file(s) and your serial number.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

I am persuing M Tech in Cad cam and I wish to do job in core area only , then which SAP module is useful for me as a fresher?

Similar Messages

Maybe you are looking for